Ploščate škarje – hidravlične, debelina reza 10–13 mm nakup rabljenega (111)
Razvrsti rezultate
- Najnižja cena Najvišja cena
- Najnovejši oglasi Najstarejši oglasi
- Najkrajša razdalja Največja razdalja
- Najnovejše leto izdelave Najstarejše leto izdelave
- Zadnja posodobitev Najstarejša posodobitev
- Proizvajalci od A do Ž Proizvajalec od Z do A
- Pomembnost
- Najnižja cena
- Cena
- Najvišja cena
- Cena
- Najnovejši oglasi
- Datum objave
- Najstarejši oglasi
- Datum objave
- Najkrajša razdalja
- Razdalja
- Največja razdalja
- Razdalja
- Najnovejše leto izdelave
- Leto izdelave
- Najstarejše leto izdelave
- Leto izdelave
- Zadnja posodobitev
- Nazadnje posodobljeno
- Najstarejša posodobitev
- Nazadnje posodobljeno
- Proizvajalci od A do Ž
- Proizvajalec
- Proizvajalec od Z do A
- Proizvajalec
- Oznaka od A do Ž
- Oznaka
- Oznaka od Z do A
- Oznaka
- Model od A do Ž
- Model
- Model od Z do A
- Model
- Najnižja referenca
- referenca
- Najvišja referenca
- referenca
- Najkrajši obratovalni čas
- Obratovalni čas
- Najdaljši čas obratovanja
- Obratovalni čas
- Pomembnost
- Pomembnost
Stroji za obdelavo kovin in orodjarne strojne opreme Obdelava pločevine Ploščate škarje – hidravlične, debelina reza 10–13 mm
Mali oglas
Wiesbaden
667 km
Giljotino shear
WEINBRENNERTSV 16/4100
Klic
Leto izdelave: 1981, Stanje: rabljeno, Working width: 4100 mm
Sheet thickness: 16 mm
Iedpfx Aj Dig Djf Tsal
Throat depth: 300 mm
Back gauge: 1500 mm
Drive power: 400 V, 45 kW
Space requirement: 4800 x 3500 x 2600 mm
Weight: approx. 28,000 kg
Including electrical system with controls for:
automatic cutting angle adjustment, automatic blade gap adjustment, front operated depth stop using adjustable stop cams, laser cutting line indicator
Sheet support system, transport device with scrap flap, front right-angle gauge with fold-out extension, 3 front support arms, operator platform, scrap container, spare blade, technical documentation
Mali oglas
Bühl
587 km
Hidravlične giljotinske škarje
ATLANTICATS 3012
Klic
Stanje: rabljeno, Leto izdelave: 1990, Sheet width: 3050 mm
Sheet thickness: 12 mm
Gap between columns: 3100 mm
Table height above floor: 900 mm
Iedpfxeu Uu Sms Af Tsal
Adjustable cutting angle: 0.5 - 3°
Strokes per minute: 6 - 13 spm
Back gauge - adjustable: 1000 mm
Hold-downs: 18 units
Oil capacity: 350 l
Total power requirement: 22.5 kW
Machine weight approx.: 8 t
Machine dimensions (L x W x H): 3.96 x 2.10 x 2.22 m
- with adjustable cutting gap -
Accessories: electric back gauge, spare blades
Mali oglas
Oldenzaal
901 km
Hidravlične giljotinske škarje
amadaGPX 1230
Klic
Stanje: rabljeno, Dolžina reza 3100 mm
Kapaciteta reza za jeklo 12 mm
Iajdjxuh Ipspfx Af Tol
Zadnji naslon 1000 mm

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec
Mali oglas
Witten
812 km
Hidravlične giljotinske škarje
HACOGSX 3013R
Klic
Stanje: novo, Leto izdelave: 2025, Sheet width: 3050 mm
Sheet thickness: 13.0 mm
Iaedjwp Tduspfx Af Tjl
Cutting angle: 0.5–2.5°
Backgauge range: 1000 mm
Working height: 900 mm
- New machine -
- 1000 mm backgauge -
with SC200 control system, motorized backgauge, cutting line illumination, electronic blade gap adjustment, electro-hydraulic cutting angle adjustment,
1000 mm angle stop with 3 balls, scale and T-slot, enclosed shear table with rollers, 2 support arms 1000 mm each with 3 balls, hydraulic hold-up device with cutting support
* For more information about the exact standard equipment and available options, please visit our website or contact us directly *
Dražba
Dražba končana
Województwo śląskie
552 km
Hidravlične škarje za giljotino
SafanM-Shear
Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, delovna širina: 3.100 mm, kot rezanja (min.): 0,5 °, rezalni kot (maks.): 3 °, maks. debelina aluminijaste pločevine: 16 mm, najv. debelina jeklene pločevine: 13 mm, hitrost zadnjega prislona os R: 50 mm/s, TECHNICAL DETAILS
Maximum sheet thickness (steel): 13 mm
Maximum sheet thickness (aluminium): 16 mm
Maximum cutting length: 3,100 mm
Cutting angle: 0.5° - 3°
Thickness of sheet to be cut (450 N/mm²): 1 - 13 mm
Backgauge speed (R-axis): 150 mm/s
Backgauge travel (Z-axis): 1,000 mm
Length of front supports (from blade): 1,500 mm
Rear buffer speed: 125 mm/s
Number of cuts at full length: 18/min
Number of cuts at minimum length: 46/min
Min. cutting gap: 0.04 mm
Max. cutting gap: 0.5 mm
Positioning accuracy: +/-0.03 mm
MACHINE DETAILS
Type of incoming power: Three-phase current
Main power supply: 3/N/PE - 50Hz - 400/230V
Motor power: 30 kW
Total weight: 12,500 kg
Overall length: 4,000 mm
Iaodpfx Aew Ucy Ief Tjl
Overall width: 4,500 mm
Overall height: 2,000 mm
EQUIPMENT
- Documentation/manual
- Finger guard
- Safety light curtain
DESCRIPTION
SafanDarley guillotine shears are equipped with unique technology. The hydraulic control is electronically managed during the cutting process. The power consumption for this type of solution is calculated according to the thickness of the material to be cut.
The backlash-free ball screw ram allows for positioning accuracy of +/-0.03 mm, while the minimum gap of 0.04 mm ensures a quality cut, even on materials from 0.5 mm up to the machine’s maximum thickness. The table design enables straight cuts even under heavy loads.
Automatic selection of the gap and cutting angle, depending on material type and thickness, along with compensation of backgauge position, allows even less experienced operators to use the machine efficiently and achieve high product quality.
Mali oglas
Dreieich
637 km
Ploščo strižne - hidravlična
FISCHERDHS 12/3100
Klic
Leto izdelave: 2005, Stanje: rabljeno, Sheet width: 3100 mm
Sheet thickness: 12 mm
Iaodpod Il Anjfx Af Tjl
Frame width: 3260 mm
Back gauge (adjustable): 3 - 1250 mm
Drive power: 37 kW
Operating voltage: 400 V
Machine weight: approx. 14 t
Space requirements: approx. 4.00 x 4.00 x 2.20 m
CNC-controlled guillotine shear
Transport dimensions:
Machine: 4.00 x 2.90 x 2.20 m (H)
Feed conveyor: 3.70 x 1.00 x 1.00 m (H)
Mali oglas
Wiesbaden
667 km
Ploščo strižne
KOELLSCHENBS 100/12
Klic
Leto izdelave: 1963, Stanje: rabljeno, številka stroja/vozila: 63731, Working width: 1040 mm
Sheet thickness: 12 mm
Back gauge: manually adjustable up to 500 mm
Drive power: 380 V, 11 kW
Iajdsb N Ektepfx Af Tsl
Space requirement: 2500 x 2150 x 1900 mm
Weight: 4100 kg
Mali oglas
Rödermark
625 km
Hidravlične škarje za giljotino
DARLEYGS 3000 x 13
Klic
Stanje: dober (rabljeno), Leto izdelave: 1982, številka stroja/vozila: 11.809, Offer 25079
Technical Data:
- Maximum working width: 3100 mm
- Maximum cutting capacity:
- For material with 400 N/mm² tensile strength: 13 mm
- For material with 700 N/mm² tensile strength: 10 mm
- Cutting angle: 1° 30'
- Blade gap adjustment via hand lever
- Number of hydraulic hold-downs: 14 pcs
- Motorized backgauge
- Electric foot switch
- Front angle stop
Iajdpov Nkdmsfx Af Tsl
- Strokes per minute: 15
- Drive: 380 V / 22 kW
- Table height: 800 mm
- Space requirement incl. backgauge, without front support arms:
approx. W 3400 x H 2250 x D 2150 mm
- Weight: approx. 12,000 kg
Mali oglas
Drachten
1.006 km
Škarje za rezanje plošč
SafanVS 310 13
Klic
Stanje: dober (rabljeno), Leto izdelave: 1975, Used guillotine shear from Safan
Capacity: 3100 x 13 mm
Iedpfx Afsxlgmro Tsal
Electric backgauge
Adjustable cutting angle
Machine is being sold as removed from operation, fixed price as-is
Mali oglas
Barendrecht
993 km
Drsna plošča
DURMAAHGM4010
Klic
Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1997, Sehr schöne Tafelschere zum Verkauf
4000 x 10 mm mit Hinteranschlagsteuerung
Winkeleinstellung
Iaodpfegp S Evsx Af Tjl
Schutzeinrichtungen
Mali oglas
Trittau
894 km
Škarje za giljotino
AtlanticATS 3000 x 12 mm
Klic
Stanje: rabljeno, Leto izdelave: 1990, Hydraulic Guillotine Shear
Make: ATLANTIC Model: ATS 3012
Year of manufacture: 1990
Technical Specifications
Manufacturer: ATLANTIC
Model: ATS 3012
Year: 1990
Sheet Capacity: 3000 x 12 mm
Adjustable Cutting Angle: 0.5 – 3 degrees
Number of Hold-Downs: 18
Back Gauge Length: 1000 mm
Working Height: 900 mm
Motor Power: 22.5 kW
Dimensions (approx.): L 4.20 x W 2.00 x H 2.20 m
Ijdpfx Aewif I Eef Tsal
Weight (approx.): 8 t
Features
• Back gauge
• Manual blade gap adjustment
• Automatic cutting angle adjustment
• Motorized rear gauge with fine adjustment
All details without guarantee.
A demonstration is possible at any time in our showroom.
Mali oglas
Marlenheim
628 km
Hidravlične škarje za giljotino
BOSCHERTSX3010
Klic
Stanje: dober (rabljeno), Leto izdelave: 2006, proizvajalec krmilnikov: ELGO, delovna širina: 3.000 mm, najv. debelina pločevine: 10 mm, najv. debelina jeklene pločevine: 10 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, zadnji prislon: 1.000 mm, moč: 14,9 kW (20,26 KM), skupna masa: 10.500 kg, Oprema: dokumentacija / priročnik, kotni ventil, nujno zaustavitev, varnostna svetlobna zapora, zaščita prstov, Z napravo za držanje pločevine.
Iedpfx Aowz Iulof Tsal
Mali oglas
Gütersloh
801 km
Hidravlične giljotinske škarje Hanseatic HS 10-3100
HanseaticHS 10-3100
Klic
Stanje: rabljeno, Leto izdelave: 1991, Maks. dolžina reza: 3100 mm
Maks. debelina reza: 10 mm jeklo
Motoriziran zadnji prislon do 1000 mm z digitalnim prikazom
Stranski prislon in podaljški mize
Omejitev dolžine reza
Iasdpfxjhlnv Ue Af Tsl
Osvetlitev rezalne linije
Teža: pribl. 10.000 kg
Pozor: Zadnji prislon deluje nekoliko nenatančno (+/- 1 mm)
Mali oglas
Rödermark
625 km
Hidravlične škarje za giljotino
DURMAZLAR-HESSESB 4013
Klic
Stanje: dober (rabljeno), Leto izdelave: 2007, številka stroja/vozila: 6085074953, Offer 24169
Technical Data:
- Max. working width: 4050 mm
- Max. cutting capacity (Steel 40): 13 mm
Iasdjtrw Hmopfx Af Tel
- Cutting gap adjustment: manual
- Number of hydraulic hold-downs: 18 pcs
- Motorized backgauge with positioning control: 20 – 1000 mm
- Front angle stop and support arms
- Strokes per minute (depending on cutting angle and length): 7 – 15 per min
- Hydraulic drive: 400 V / 30 kW
- Space requirement incl. backgauge, excl. front support arms: approx. W 5400 x H 2250 x D 2250 mm
- Weight: approx. 16,000 kg
- Includes:
- Electric foot switch
- Cutting line illumination
- Cutting length preselection
- Rear of the machine with light curtain safety system
Mali oglas
Ahaus
879 km
Hidravlične giljotinske škarje
ERMAKCNC HGD 3100-10 HH
Klic
Stanje: rabljeno, Leto izdelave: 2022, Sheet width: 3100 mm
Sheet thickness: 10.0 mm
Sheet thickness for stainless steel: 6.0 mm
Hold-downs: 14 pcs
Strokes per minute: 13 spm
Cutting angle: 2.0°
Throat depth: 350 mm
Backgauge – adjustable: 1000 (+) mm
Oil capacity: 260 l
Motor power: 22.0 kW
Weight: 10,575 kg
Dimensions (LxWxH): 4100 x 2400 x 2170 mm
Demonstration machine (!!)
From our showroom (like NEW)
With very few operating hours
The manufacturer ERMAK offers, with the hydraulic swing beam shear of the HGD series, a robust and durable solution for the economical processing of metal sheets. This compact all-round machine allows you to increase your productivity. The hydraulic swing beam shear model HGD supports you with precise, fast, and cost-effective cutting in your daily operations. Hydraulic hold-downs ensure secure sheet clamping, while the support table with integrated ball rollers guarantees ergonomic and efficient cutting for the operator. The CNC control allows you to select from various sheet types stored in the material library. Once the maximum thickness is chosen, the optimal blade gap is automatically set electro-hydraulically via CNC control, though it can also be manually adjusted. The position and retract function of the motorized backgauge can be easily set via touchscreen. Additionally, the control system offers memory for cutting programs with cutting sequences.
-----
Robust electro-hydraulic CNC swing beam shear
* Including CYBELEC CNC touchscreen control
* Including CNC electro-hydraulic blade gap adjustment
-----
Iaodpoxab I Hefx Af Tol
Equipment:
- CNC electro-hydraulic swing beam shear
- Including CYBELEC CNC touchscreen controller, model "CybTouch 8"
- Selected features of the CNC control:
* Backgauge preset – X axis
* Blade gap adjustment
* Piece counter
* Cutting length limiter
* Material selection, including sheet thickness
* Cutting line illumination (cutting to scribe line) … and many more
- Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis)
* On ball screws
* Automatically retracts at maximum travel distance for longer cuts
* Including selectable retract function ("Swing-Away function")
* Positioning accuracy 0.1 mm
* Travel speed 80 mm/sec
- 1x side gauge, with T-slot and mm scale
- 2x front support arms with T-slot and mm scale
- Ball rollers in the front support table
- Tiltable finger guard with safety switch
* Finger guard with viewing windows for scribe cutting
- Cutting line illumination with shadow effect
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Safety light curtain behind the machine
- Free-moving foot switch
- CE mark/declaration of conformity
- Operating instructions + wiring diagram + hydraulic schematic
Including special equipment:
- Pneumatic sheet support device for thin sheet cutting
Mali oglas
Dortmund
811 km
Ploščo strižne
LAMI NOVASC 4012
Klic
Stanje: novo, Maximum cutting length: 4000 mm
Maximum sheet thickness (mild steel): 12 mm
Iodpfogiud Usx Af Tjal
Maximum sheet thickness (stainless steel): 8 mm
Cutting angle: 1.5°
Throat depth: 350 mm
Cuts per minute: 12
Drive power: 18.5 kW
Dimensions without support arms and rear safety guard (L x W x H): approx. 4765 x 2000 x 2370 mm
Weight: approx. 13,300 kg
Equipment / Special features:
• Electronic position display ELGO P 40 for motorised back gauge
o Length approx. 800 mm
o Ball screw spindles
• 1 pc. heavy-duty squaring arm with tilting cam, 1000 mm
• 2 pcs. heavy-duty support arms
• Large throat depth of 350 mm for cutting longer sheets
• Central blade clearance adjustment
• Cutting line illumination
• Flat, fixed cutting angle of 1.5°
• Ball rollers in the table
• Top blade with 2 and bottom blade with 4 cutting edges
• Plastic feet for hold-down clamps
• Electric foot switch
• Rear sheet chute
• Oil filling
• Hydraulics by BOSCH, DUPLOMATIK, REXROTH or OILCONTROL
• Electrical components by SCHNEIDER, SIEMENS, TELEMECANIQUE
• Paint finish: dark grey RAL 7031, light grey RAL 7035, yellow RAL 1033
• Operating manual
• CE-compliant
Delivery time: approx. 2-3 months after receipt of order
plus pre-carriage costs China - Germany
Exclusive agency!
Siegfried Volz Werkzeugmaschinen
Rüschebrinkstr. 151-153
D - 44143 Dortmund - Wambel
Mali oglas
Saerbeck
857 km
Škarje za giljotino
DurmaSBT 3010
Klic
Stanje: novo, Leto izdelave: 2023, najv. debelina jeklene pločevine: 10 mm, dolžina rezanja (maks.): 3.050 mm, Technical Specifications
Cutting Capacities:
- Maximum cutting length: 3,100 mm
- Maximum permissible thickness for mild steel: 10 mm
- Maximum permissible thickness for stainless steel: 6 mm
- Throat depth: 50 mm
- Adjustable cutting angle: 1.5 degrees
- Number of hold-downs: 16
- Hold-down force: 22 tonnes
- Adjustable backgauge: up to 1,000 mm
- Backgauge speed: 200 mm per second
Drive and Dimensions:
- Motor power: 22 kW
- Oil tank capacity: 200 liters
Iajdpfxort Uv Es Af Tol
- Support arms: 2 units
- Working table height: 865 mm
- Working table width: 580 mm
- Working table length: 3,515 mm
- Machine dimensions (LxWxH): 4,200 mm x 2,250 mm x 2,100 mm
- Weight: 9,300 kg
- Total width incl. support arm and safety guard: 3,600 mm
Features:
- Swing-cut design for precision results
- Intuitive NC control (D-Touch 7) with touchscreen for settings such as backgauge, cutting length, and quantity, including USB interface
- Motorized backgauge with ball screw drive, offering a range up to 1,000 mm and foldable for maximum flexibility
- User-friendly control panel on a swiveling arm for operator convenience
- Hydraulic hold-downs positioned close to the cutting edge for optimal cutting results
- Foot pedal for easy operation
- Centrally adjustable blade gap for various material thicknesses
- Cutting line illumination for enhanced precision
- Large support table with ball transfers for smooth material handling
- Cut counter for total number of cuts
- Options for single and series cutting
- Foldable finger guard and side stops for safe operation
- Easily replaceable and regrindable blades for lasting sharpness
- Adjustable cutting length for efficient processing and minimal material waste
- Low-maintenance design with easy-access oil filling
- Safety light barriers at the rear of the machine for increased workplace safety
- Professional customer service
- Operating instructions in GERMAN and ENGLISH
- Compliant with current CE safety regulations
Mali oglas
Lemmer
1.004 km
Giljotinske škarje 4100 x 13 mm
DarleyGS4100x130
Klic
Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1998, najv. debelina pločevine: 13 mm, najv. debelina jeklene pločevine: 13 mm, zadnji prislon: 1.000 mm, pomik zadnjega naslona os Z: 1.000 mm, skupna masa: 18.400 kg, skupna dolžina: 4.400 mm, skupna širina: 2.350 mm, skupna višina: 2.250 mm, dolžina rezanja (maks.): 4.100 mm, Oprema: varnostna svetlobna zapora, zaščita prstov, Working length: 4,100 mm
Cutting capacity: 13 mm
Backgauge: 1,000 mm
Control system: Darley Delem
Equipped with:
- Support arms, 4,000 mm long
Ijdewc Sahjpfx Af Tjal
- Foot pedal
- Material discharge roller conveyor
- Extra set of blades
- Documentation
Country of origin: Netherlands
Motor power: 30 kW
Machine dimensions (LxWxH): 440 x 235 x 225 cm
Machine weight: 18,400 kg
Mali oglas
Gütersloh
801 km
Giljotinske škarje Amada GPS 1230
AmadaGPS 1230
Klic
Stanje: rabljeno, Max. cutting length: 3000 mm
Max. sheet thickness: 12 mm (steel)
Iaedpotx E E Iefx Af Tel
CNC-controlled backgauge up to 1000 mm
Side gauge and table extensions
Cutting length limitation
Cutting edge illumination
Light barriers for the rear area
Spare blade
Weight approx. 9000 kg
Mali oglas
Rödermark
625 km
Hidravlične giljotinske škarje
BAYKALMGH-3100-10
Klic
Leto izdelave: 1993, Stanje: dober (rabljeno), številka stroja/vozila: 479, Offer 22408
Iodpjpxmxcefx Af Teal
Technical Specifications:
- Max. working width: 3050 mm
- Max. cutting capacity (St 40): 10 mm
- Throat depth: 270 mm
- Cutting angle: °
- Manual adjustment of blade gap
- Number of hydraulic hold-downs: 16 pcs
- Motorized backgauge: 20 – 650 mm
- Front angle stop and support arms
- Strokes per minute (depending on cutting angle and length): 7 – 12 rpm
- Hydraulic drive: 400 V / 22 kW
- Table height: approx. 820 mm
- Space requirement incl. backgauge, excluding front support arms: approx. W 3850 x H 2000 x D 2000 mm
- Weight: approx. 8500 kg
- Equipped with: electric foot switch, cutting line illumination
Mali oglas
Ahaus
879 km
Hidravlične giljotinske škarje
ERMAKCNC HVR 3100-13
Klic
Stanje: novo, Sheet width: 3100 mm
Sheet thickness: 13.0 mm
Sheet thickness (stainless steel): 8.0 mm
Hold-downs: 14 units
Strokes: 11–20 strokes/min
Oil capacity: 310 l
Cutting angle: 0.05–2.0°
Throat depth: 350 mm
Table height: 900 mm
Total power requirement: 22.0 kW
Machine weight approx.: 13,300 kg
Dimensions (LxWxH): 5,110 x 2,570 x 2,400 mm
Manufacturer ERMAK offers you with the HVR series hydraulic, guided guillotine shear a robust and durable machine for efficient sheet metal processing. This compact, all-purpose machine helps you increase productivity. The hydraulic guillotine shear HVR model assists you with precise, fast and cost-efficient cutting in your daily operations. Using hydraulic hold-downs to secure the sheet as well as a ball-transfer support table ensures ergonomic and efficient cutting for your operator. The CNC controller allows you to select from various sheet types pre-configured in the material library. Upon selection of maximum thickness and material type, the optimal cutting gap and cutting angle are automatically set electro-hydraulically by the CNC controller, but can also be operator-adjusted. The position and retract feature of the motorised backgauge are conveniently set via touchscreen. Additionally, the control system offers storage for cutting programs with sequential procedures.
-----
Robust electro-hydraulic CNC guillotine shear, 'guided'
* Inclusive of CYBELEC CNC touchscreen controller
* CNC electro-hydraulic cutting gap adjustment
* CNC electro-hydraulic cutting angle adjustment
-----
Features:
- CNC electro-hydraulic guillotine shear, guided
- Including CYBELEC CNC touchscreen controller, model "CybTouch 8"
- Selected CNC controller functions:
* Backgauge preset – X axis
* Cutting gap adjustment
* Piece counter
* Cutting length limitation
Iaodjxabikepfx Af Tjl
* Material selection, including sheet thickness
* Cutting line illumination (cutting to scribe line)... and much more
- Motorised backgauge, travel range = 5.0–1,000 mm (X axis)
* On recirculating ball screws
* Automatically swings up at maximum travel for longer cuts
* Including selectable retract function ("Swing-Away function")
* Positioning accuracy 0.1 mm
* Approx. traverse speed 80 mm/sec
- 1x side gauge, with T-slot and mm scale
- 2x front support arms, with T-slot and mm scale
- Ball transfers on front support table
- Hinged finger guard with safety interlock
* Finger guard with viewing windows for scribe line cutting
- Cutting line illumination with shadow line
- BOSCH/HOERBIGER hydraulic unit
- SIEMENS electrical equipment
- Light curtain at the rear of the machine (safety device)
- Freely movable foot pedal
- CE mark/Declaration of Conformity
- Operating manual + wiring diagram + hydraulic circuit diagram
Znak zaupanja
Prodajalci, certificirani pri Machineseeker

Mali oglas
Rödermark
625 km
Hidravlične škarje za giljotino
ATLANTICATS 3012
Klic
Stanje: rabljeno, Leto izdelave: 1992, številka stroja/vozila: A20533, Offer 25199
Technical Specifications:
- Maximum working width: 3050 mm
- Maximum cutting capacity (St 40): 12 mm
- Cutting angle adjustable (motorized): 0.5° to 3°
- Blade gap adjustment: manual
- Number of hydraulic hold-downs: 18 pcs
- Motorized backgauge: 10 – 1000 mm
- Front angle stop
- Strokes per minute (depending on cutting angle and length): 7 – 17/min
- Hydraulic drive: 400 V / 22.5 kW
Ijdpfx Afowtz Shj Teal
- Table height: 770 mm
- Space required (approx.): W 4100 x H 2030 x D 2030 mm
- Weight (approx.): 8500 kg
- Includes:
- Electric foot switch
- Cutting line illumination
- Rear area safety device with light barrier
Mali oglas
Ahaus
879 km
Hidravlične giljotinske škarje
ERMAKCNC HGD 3100-10
Klic
Stanje: novo, Sheet width: 3100 mm
Sheet thickness: 10.0 mm
Sheet thickness (stainless steel): 6.0 mm
Hold-downs: 14 units
Strokes per minute: 13
Oil capacity: 260 liters
Cutting angle: 2.0°
Throat depth: 350 mm
Motor power: 22.0 kW
Backgauge (adjustable): 1,000 mm
Weight: 10,575 kg
Dimensions (L x W x H): 4.05 x 2.5 x 2.17 m
Ijdpfsxabdbjx Af Tsal
-----
With its hydraulic swing beam shear, model range HGD, ERMAK offers you a robust and durable machine for the economical processing of sheet metal. This compact all-rounder increases productivity in your operation. The HGD hydraulic swing beam shear provides precise, fast, and cost-efficient cutting in your daily workflow. The use of hydraulic hold-downs for sheet clamping and the support table with integrated ball rollers ensures ergonomic and efficient cutting for your operator. CNC control allows for the use of different types of sheet metal, already stored in the material library. After selecting the maximum thickness, the optimal blade gap is automatically set electro-hydraulically via CNC control, but can also be adjusted manually. The position and retract function of the motorized backgauge can be set easily via touchscreen. In addition, the controller offers memory for cutting programs with cut sequences.
-----
Robust electro-hydraulic CNC swing beam shear
* Including CYBELEC CNC touchscreen control
* Including CNC electro-hydraulic blade gap adjustment
-----
Equipment/features:
- CNC electro-hydraulic swing beam shear
- Including CYBELEC CNC touchscreen controller, model “CybTouch 8”
- Some CNC control functions:
* Backgauge pre-selection – X axis
* Blade gap adjustment
* Piece counter
* Cutting length limitation
* Material selection, incl. sheet thickness
* Cutting line illumination (for scribing cuts), and many more
- Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis)
* With recirculating ball screws
* Automatically swings up at maximum travel for longer cuts
* Including selectable retract function (“Swing-Away function”)
* Positioning accuracy 0.1 mm
* Travel speed 80 mm/sec
- 1x side gauge, with T-slot and mm scale
- 2x front support arms, with T-slot and mm scale
- Ball rollers in the front support table
- Folds-up finger guard with safety switch
* Finger guard with viewing windows for scribing cuts
- Cutting line illumination with shadow cast
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Light curtain at rear of the machine (safety feature)
- Movable foot switch
- CE mark / Declaration of Conformity
- Operating manual + wiring diagram + hydraulic diagram
Mali oglas
Ahaus
879 km
Hidravlične giljotinske škarje
ERMAKCNC HGD 3100-13
Klic
Stanje: novo, Sheet width: 3,100 mm
Sheet thickness: 13.0 mm
Sheet thickness (stainless steel): 8.0 mm
Hold-downs: 14 units
Strokes per minute: 11
Oil capacity: 310 liters
Cutting angle: 2.0°
Throat depth: 350 mm
Table height: 900 mm
Total power requirement: 22.0 kW
Machine weight (approx.): 12,200 kg
Dimensions (LxWxH approx.): 4,100 x 2,300 x 2,235 mm
-----
The manufacturer ERMAK offers with the hydraulic swing beam shear of the HGD model series a robust and durable machine designed for efficient sheet metal processing. This compact all-rounder increases your productivity. The HGD hydraulic swing beam shear assists you in achieving precise, fast, and cost-effective cuts in your daily operations. Hydraulic hold-downs secure the sheet, and the support table with built-in ball rollers ensures ergonomic and efficient cutting for your operator. The CNC control facilitates the use of different sheet types, already stored in the material library. After selecting the maximum thickness, the optimal cutting gap is automatically adjusted electro-hydraulically by the CNC control, but can also be set manually. The position and retract function of the motorized backgauge can easily be set via touchscreen. Additionally, the control provides storage for cutting programs with cutting sequences.
-----
Robust electro-hydraulic CNC swing beam shear
* Including CYBELEC CNC touch screen control
* Including CNC electro-hydraulic cutting gap adjustment
-----
Features:
Iasdpfx Afoxaa U Ss Tel
- CNC electro-hydraulic swing beam shear
- Including CYBELEC CNC touch screen controller, model "CybTouch 8"
- Selected CNC functions:
* Backgauge preset - X axis
* Cutting gap adjustment
* Piece counter
* Cutting length limitation
* Material selection, including sheet thickness
* Cutting line illumination (cutting on scribed line) ...and much more
- Motorized backgauge, travel range = 5.0 – 1,000 mm (X axis)
* On ball screw spindles
* Automatic swing-up at maximum travel for longer cuts
* Including retract function selectable ("Swing-Away Function")
* Positioning accuracy 0.1 mm
* Travel speed 80 mm/sec
- 1x side gauge, with T-slot and mm scale
- 2x front support arms with T-slot and mm scale
- Ball rollers in front support table
- Folding finger guard with safety switch
* Finger guard with viewing windows for cutting on scribed line
- Cutting line lighting with shadow projection
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Light curtain behind the machine (safety feature)
- Movable foot switch
- CE mark / Declaration of Conformity
- Operating manual + wiring diagram + hydraulic diagram
Mali oglas
Ahaus
879 km
Hidravlične giljotinske škarje
ERMAKCNC HVR 3100-13
Klic
Stanje: rabljeno, Leto izdelave: 2008, Sheet width: 3,100 mm
Sheet thickness: 13.0 mm
Sheet thickness for stainless steel: 8.0 mm
Hold-down clamps: 14 pcs
Strokes: 11 – 20 strokes/min
Oil capacity: 310 l
Cutting angle: 0.05 – 2.0 °
Throat depth: 350 mm
Table height: 900 mm
Total connected load: 22.0 kW
Machine weight approx.: 13,400 kg
Dimensions (L x W x H): 5,110 x 2,570 x 2,400 mm
Current list price approx.: €80,000
Special price on request
- Sold in inspected condition – machine video available –
?v=K4ymYMIJ7_Y
-----
Ijdpexaadaefx Af Tjal
Robust electro-hydraulic CNC guillotine shear, roller guided
* incl. CYBELEC "DNC 60 CUT" control
* incl. CNC electro-hydraulic blade gap adjustment
* incl. CNC electro-hydraulic cutting angle adjustment
-----
Equipment:
- CNC electro-hydraulic guillotine shear, roller guided
- incl. CYBELEC CNC controller, model "DNC 60"
- CNC motorized backgauge, traverse range = 5.0 – 1,000 mm (X axis)
* On ball screw spindles
* Automatically folds up at max traverse for longer cuts
* Including selectable retraction function ("Swing-Away function")
* Positioning accuracy: 0.1 mm
* Approx. traverse speed: 80.0 mm/sec
- Electro-hydraulic cutting angle adjustment
- Electro-hydraulic blade gap adjustment
- 1x side gauge with T-slot and mm scale
- 2x front support arms, with T-slot and mm scale
- Ball rollers in the front support table
- Flip-up finger guard with safety switch
- BOSCH/HOERBIGER hydraulic system
- SIEMENS electrical system
- Light curtain behind the machine (safety device)
- Rear sheet chute (for inserting sheets)
- 1x mobile foot switch
- CE mark
- Operating manual
Olajšamo vam iskanje
Nove ponudbe prejmete takoj in brezplačno po e-pošti.
Iskalno nalogo lahko kadar koli preprosto končate.
Rabljeni ploščate škarje – hidravlične, debelina reza 10–13 mm (111)
Zdaj preiščite celoten Machineseeker z več kot 200.000 rabljenimi stroji.Brskajte po najbolj priljubljenih poimenovanjih strojev:
- Da Sklad
- Hidravlična Črpalka 200 Bar
- Mech Ploščo Strižne
- Plošča Tiskanega Vezja
- Plošča Tiskanega Vezja Skupščine
- Plošče Iz Vezanega Lesa
- Plošči Prevoz Vozička
- Plošči Videl M Točkovanja
- Ploščo Kavelj 1000 Kg Do 70 Mm

Izvedite več zdaj
+44 20 806 810 84
+44 20 806 810 84
Objavite oglas zdaj
*na oglas/mesec













































































































































































