Vpenjalne plošče nakup rabljenega (453)

Stanje: rabljeno, Technical details: Plate length: 385 mm Plate width: 205 mm Plate thickness: 65 mm 8 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm Ksdpfxeu N D Hro Aarsnc

Stanje: rabljeno, Opis: * Zaradi sprememb v poslovnem področju na področju obdelave in prestavitve proizvodnje prodajamo v kratkem roku podno ploščo/pritrdilno ploščo in pritrdilni kot. * Podno/pritrdilna plošča: Mere: 1.000x800x45 mm Razdalja med luknjami: 40x40 mm Navoj za vpenjanje: M12 Vpenjalna puša: d12F7 * Pritrdilni kot s podno ploščo: Osnovna površina: 350x280x40 mm Višina kota: 350 mm 2x podne plošče: 350x280x25 mm * Pomembno: Iz logističnih razlogov prodajamo izključno na območju Evrope. * »Prodajalec izključuje kakršno koli garancijo za kupljeno blago. Blago se prodaja v trenutnem stanju, brez garancije za njegovo primernost za določen namen ali za njegovo brezhibnost. Kupec potrjuje, da je blago pregledal pred nakupom in da je zadovoljen z njegovim stanjem. Prodajalec ne prevzema odgovornosti za škodo, ki nastane zaradi uporabe blaga. Kakršne koli zahteve kupca proti prodajalcu so izključene.« * Možnost prodaje tudi posamično. Knjdpfx Aozp Hnqoaroc Status: 18. 08. 2026 * Cena za ploščo in kot: 1.200 € (po dogovoru) * Za dodatna vprašanja in informacije sem vam vedno na voljo.

Stanje: rabljeno, Technical Details: Plate length: 4000 mm Plate width: 1300 mm Plate height: 190 mm Plate thickness: 95 mm Machine weight approx.: 4.15 t per plate Transport dimensions (LxWxH): approx. 4.0 x 1.3 x 0.2 m per plate Very good steel plate for sale, available immediately, packed in oil paper and foil AP 4000x1300 – ground steel plate Ra 0.8 Surface ground to Ra 0.8 as per drawing T-slots according to DIN 650: a = 36 mm; h = 65 mm; b = 60 mm; c = 26 mm, chamfered approx. 1.5 mm Kodpfxsu N D Ips Aarenc Distance from edge: 100 mm; Center distance: 100 mm (without the four lifting eyes shown in the picture)

Stanje: rabljeno, Tehnični podatki: Dolžina plošče: 4600 mm Širina plošče: 1450 mm Višina plošče: 300 mm Debelina plošče: 300 mm Približna teža stroja: 7,2 t / plošča Kjdpfswtctgsx Aaronc 2 vpenjalni plošči (cena za ploščo) Material: jekleni liv Obdelana površina T-utori po DIN 650: a=40; h=66; b=71; c=29 mm Razmak med utori: 300 mm 6 prebojev Ø 41,0 mm

Stanje: rabljeno, Technical Details: Plate length: 800 mm Plate width: 455 mm Plate height: 75 mm Machine weight approx.: 264 kg Transport dimensions (LxWxH): 800 x 455 x 250 mm Ram/platen plate removed from a PYE 160S press - with central through-hole Ø 40mm Kjdpfxou N Dhis Aaronc - with 6 pitch circle bores Ø 16mm, pitch circle Ø 160mm - diagonal T-slot according to DIN 650 (a=19mm; h=25mm; b=38mm; c=16mm) - with support plate underneath = distance approx. 410mm

Stanje: rabljeno, Technical Details: Plate length: 5040 mm Plate width: 2230 mm Plate height: 460 mm Approx. machine weight: 9500 kg Machine table can be used as a clamping plate. - Material: cast steel - Clamping area: 4100 x 2230 mm - Lateral run-out section = W: 2110 x L: 1040 mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55.5; a=33.0 mm - Slot spacing: 250 mm Kjdpeu N Dqqefx Aarjnc

Stanje: rabljeno, skupna višina: 400 mm, skupna dolžina: 5.000 mm, širina plošče: 2.000 mm, Štirje kosi PRITRDILNIH PLOŠČ z T-utorom Dimenzije: 5 m x 2 m x V 0,4 m – rabljeno, kot prikazano Knjdjzhi I Rspfx Aarjc Vsaka plošča ima 10 T-utorov izdelanih po DIN 650 - 35H12 – širina utora 35 mm, nosilnost na ploščo cca 20 ton na kvadratni meter, teža na ploščo cca 9.000 kg.

Stanje: rabljeno, Technical details: Plate length: 205 mm Plate width: 195 mm Knodpfx Asu N D H Eearsc Plate thickness: 65 mm 14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Stanje: rabljeno, Technical details: Plate length: 5600 mm Plate width: 1890 mm Plate height: 1. 335 2, 390 3, 370 mm Ksdou Rl Ugopfx Aaronc Machine weight approx.: 9.0 t per plate Transport dimensions (LxWxH): 5.6 x 1.89 x 0.335 (0.390) (0.370) m 3 clamping plates available (price per plate) Weights: No. 1 = 8000 kg No. 2 = 9000 kg No. 3 = 8500 kg Material: Cast iron T-slots according to DIN 650 Number of longitudinal slots: 6 | Size: a=36 mm, h=64 mm, b=60 mm, c=25 mm Slot pitch: 315 mm Through holes: Number 23 | Diameter D=130 mm Internal diameter.

Stanje: rabljeno, Technical details: Plate length: 2000 mm Plate width: 1500 mm Plate height: 820 mm Plate thickness: 185 mm Machine weight approx.: approx. 2.1 / 2.2 t per plate Ksdpfx Aeu N D Rdsarsnc Transport dimensions LxWxH: approx. 2.0 x 1.5 m / per plate A total of 6 of these clamping plates are available for sale. (Price per piece) Material: cast steel/profile cast T-slots according to DIN 650: a = 43 mm; h = 105 mm; b = 76 mm; c = 50 mm; center distance 375 mm 4x through holes Ø 90 mm 10x mounting holes Ø 25 mm with countersink Ø 85 x 135 mm with base frame for plate no. 1+3+4+5+6: L: 1990 mm x W: 1490 mm x H: 185 mm with base frame for plate no. 2: L: 2020 mm x W: 1515 mm x H: 520 mm

Stanje: rabljeno, Technical Details: Plate length: 4000 mm Kjdpfx Asu N Dmlsarsnc Plate width: 1000 mm Plate height: 1700 mm Material thickness: 150 mm Machine weight approx.: 2300 kg Cast aluminium plate, planed finish This plate allows assembly work to be carried out on both sides. Numerous clamping holes (M8), evenly distributed across the plate. The aluminium plate stands securely on the floor thanks to its lifting/running gear (welded/bolted). It can be moved to different locations using two wheels on each side. *

Stanje: rabljeno, Technical details: Plate length: 3000 mm Plate width: 1775 mm Plate height: 350 mm Knjdpou N Dglofx Aarec Plate material: cast steel. 7 T-slots according to DIN 650 a=35 mm; h=60 mm; b=62 mm; c=26 mm; center spacing 250 mm The clamping plate is equipped with side mounting along the longitudinal and front sides.

Stanje: rabljeno, Technical details: Knodpfx Aasu N D Icorec Plate length: 255 mm Plate thickness: 65 mm 4 plates available T-slots according to DIN 650, suitable for T-slot nuts per DIN 508 a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Stanje: dober (rabljeno), skupna dolžina: 2.000 mm, skupna širina: 1.200 mm, Size: 2000x1200x200 mm Hole size: 1300x500 mm Knjdeur N Sdjpfx Aarsc

Stanje: rabljeno, Tehnične podrobnosti: Dolžina plošče: 510 mm Širina plošče: 270 mm Debelina plošče: 65 mm T-utori po DIN 650 za T-vložke po DIN 508 Knodpfx Aaou N D Dwsroc a=13,9; b=24,2; c=9,8; h=19,9 mm

Stanje: rabljeno, Technical details: Plate length: 640 mm Plate width: 330 mm Plate thickness: 65 mm T-slots according to DIN 650, suitable for T-slot nuts according to DIN 508 Knjdpfxju R A A Uo Aaroc a = 13.9 mm; b = 24.2 mm; c = 9.8 mm; h = 19.9 mm

Stanje: rabljeno, Leto izdelave: 1999, Technical details: Knodpfxou N Dnve Aarjc Plate length: 5500 mm Plate width: 1500 mm Plate height: 250 mm Machine weight approx.: 6.5 t Required floor space approx.: 5.5 x 1.5 m - Distance between T-slots = 542 / 500 mm for staggered parallel arrangement - T-slot according to DIN 650 - a = 28.0 mm; h = 48.0 mm; b = 48.0 mm; c = 22.0 mm - incl. leveling screws and protective caps as per standard.

Stanje: rabljeno, Table unit from a DROOP & REIN portal milling machine Clamping plate with T-slots made of cast steel/grey cast iron Table unit with clamping plate and very massive guideway Table clamping area: 5500 x 2000 mm Travel of table clamping plate: approx. 3100 mm Table height / construction height: 1050 mm Table load capacity: max. 20 tons Ball screw: Ø 100 mm Lead: 20 mm (single start) - Machining table is very stably guided on the bed - Metal telescopic guideway cover - From a DROOP & REIN portal milling machine Kedpfx Aajthuzperonc - Longitudinal table movement via ball screw and SIEMENS servo motor - Clamping surface with 11 T-slots (28 mm) - Drive via SIEMENS servomotor 1FT6134-6AB71-1AG2 with encoder IC200448S/R (RN 000 B25) Overall length: 9500 mm Width: 2000 mm Construction height: 1050 mm Net weight: 28 tons Good condition

Stanje: dober (rabljeno), Osnovna plošča za varjenje, litina + jeklo 1 kos, 2000x4000 mm, debelina 100 mm 2 kosa, 1000x2000 mm, debelina 40 mm, rebrasta 1 kos, z utori, 2400 x 4400 mm 1 kos, 4600x2300 mm, debelina 460 mm Kedpfx Aasxmkfbjronc 1 kos, 800x2000 mm, z nosilno konstrukcijo

Stanje: rabljeno, Leto izdelave: 1988, Tehnični podatki: Knjdpfx Aasu N Druersc Dolžina plošče: 4000 mm Širina plošče: 2000 mm Višina plošče: 460 mm Teža stroja cca: 6000 kg 2 jeklene litine plošči na voljo za prodajo. (Cena na kos!) T-utori po DIN 650 a=40; h=56; b=74; c=28 mm; Razmak med T-utori = 250 mm Plošči sta opremljeni za stransko pritrditev.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Good day, We offer both used and new pallets for workpiece clamping, compatible with Erowa systems or equivalent. These pallets are prepared to accept clamps with a 52mm grid. We can also easily adapt clamps with a 96mm pitch. Clamping studs are included. Single unit purchases are possible. Spare parts are available. The clamps themselves are not for sale. All used clamping elements have been cleaned and inspected by us. Additionally, a functional test has been carried out. The clamping devices show minor signs of wear. Knsdpfx Aaswa Ihisroc If you have any questions, please do not hesitate to contact us.

Stanje: rabljeno, Technical details: Plate length: 4900 mm Plate width: 1460 mm Plate height: 300 mm Plate thickness: 300 mm Machine weight approx.: 5.3 t / per plate Transport dimensions LxWxH: approx. 4.9 x 1.5 x 0.3 m / per plate Two plate fields are available for sale. Knedpoval Hqefx Aarsc Material: cast steel T-slots according to DIN 650: a=58; h=108; b=110; c=50 mm Pitch between centers: 295 mm 6 through holes Ø 40 mm On one plate, two T-slot sections are broken out at the front end.

Stanje: rabljeno, Technical details: Plate length: 3500 mm Knodpfoval Iuex Aarsc Plate width: 1500 mm Plate height: 345 mm Machine weight approx.: 3.7 t / per plate Transport dimensions LxWxH: approx. 3.5 x 1.5 x 0.35 m / per plate Four clamping plates are available for sale. Manufacturer: MORA-Meuselwitzer Guss Material: Cast steel T-slot according to DIN 650: a = 13.5 mm; h = 24 mm; b = 24.5 mm; c = 11 mm One long side surface finely milled 2 plates are equipped with guide rails

Stanje: rabljeno, Technical details: Plate length: 2600 mm Plate width: 380 mm Plate height: 115 mm Plate thickness: 115 mm Machine weight approx.: approx. 0.4 t / per plate Transport dimensions LxWxH: approx. 2.6 x 0.38 x 0.2 m / per plate Knodpfxsval Emo Aarec A total of 3 plates are offered for sale together. (Price per plate) These can be connected to form a plate field. Material: Steel, machined surface T-slot longitudinal quantity: 2, a=36mm, h=48mm, b=60mm, c=24mm Pitch: 160mm Base mounting, quantity: 4, size D=32mm x 45mm, counterbore D70x65mm End face bore, quantity: 1 per end face, M20, centered position

Stanje: rabljeno, Technical details: Plate length: 3,880 mm Plate width: 1,390 mm Plate height: 300 mm Number of T-slots: 4 units Machine weight approx.: 3.2 t Required space approx.: L: 3.7 x W: 1.4 x H: 0.3 m Dimensions (L x W x H): 3.7 x 1.4 x 0.3 m Ksdpfxsu Nkl Is Aaronc Base plate from a former radial drilling machine T-slot size according to DIN 650 a = 28 mm b = 50 mm c = 24 mm h = 52 mm T-slot spacing = 250 mm