Rainer Schaal GmbH i.L.

Stanje: rabljeno, Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: EB16649 F99, skupna masa: 231 kg, vhodna napetost: 230 V, vrtljajska hitrost (min.): 12 obr/min, največja hitrost vrtenja: 36 obr/min, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The 1224 model performs threading on a wide range of pipes including black, galvanized, and plastic-coated pipes, as well as stainless steel conduit, IMC, heavy-wall conduit, and rods with a hardness up to 30 Rockwell C. Features - Induction motor to minimize noise. - The special motor with auxiliary winding and capacitor start allows the 1224 model to thread a wide range of materials, even in cases of voltage drops. - Universal die head 1/4" – 2"; quick-opening die head 2 1/2" – 4" suitable for cutting tapered or straight NPT/NPSM or BSPT/BSPP threads. Lajdsy Hu Iijpfx Al Ijb - Adequate and consistent oil lubrication of dies and workpiece through the head. Technical specifications - Nominal pipe capacity: 6 mm – 100 mm (1/4" – 2") at 36 rpm, 65 mm – 100 mm (2 1/2" – 4") at 12 rpm, 100 mm – 150 mm (4" – 6") with 161 geared threader. - Bolt capacity: 6 mm – 50 mm (1/4" – 2"). - Motor control: Forward/Off/Reverse, heavy duty, rotation, and integrated foot switch. - Gearbox: Two-speed gear box with a 3:1 ratio. - Chuck: Hammer-type with replaceable rocker jaw inserts. - Rear-centering device: Cam action. - Oil pump: Self-priming, gerotor-type, automatic-reversing, constant-flow. - Lubrication: Through the die head.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, REMS Magnum rezalnik navojev za cevi je primeren za cevi od 1/4" do 2". Priloženi so naslednji rezalniki navojev: Ljdpeyyxi Rofx Al Ioab - 3x: R1/2 - 3/4 - 5x: R1 - 2 Naprava je bila preverjena za funkcionalnost in ima elektro pregled, ki ga je opravilo električno podjetje.

Stanje: dober (rabljeno), Rezkalna glava z Strehler čeljustmi, navojno orodje, stroj za rezanje navojev, navojni rezalnik za cevi, rezalna glava, glava za rezanje vijakov Ledpfoyquwqex Al Ijab - Proizvajalec: Ridgid, model rezalne glave 5008 - Velikost cevi: 1/4 do 1 " - Vgrajene rezalne čeljusti: 1 " - Dimenzije: 190/240/V75 mm - Teža: 3,4 kg

Stanje: dober (rabljeno), Set rezilnih glav, ročni rezalnik navojev za cevi, stroj za rezanje navojev, rezalnik navojev za cevi, rezalna glava, navojno držalo -Set za rezanje navojev: 47-delni / notranji in zunanji navoji -Velikost: M3 do M20 -Posamezne komponente: glej fotografije -Dimenzije: 500/420/H85 mm Lodpfxsyk Upyo Al Ioab -Teža: 9,1 kg

Stanje: rabljeno, Navojni stroj, stroj za navoj na cevi, Ridgid 300, rabljeni stroj Ljdpeybbamofx Al Isab Proizvajalec: Ridgid Tip: 300 Skupne dimenzije: Širina: 1180 mm Globina: 1250 mm Višina: 1500 mm Električni podatki: 230V Funkcije: rezanje navojev, rezanje na dolžino, odstranjevanje ostrin

Stanje: dober (rabljeno), Stroj za rezanje navojev, rezalnik navojev za cevi Ledjx I Agpepfx Al Ioab - Proizvajalec: Rothenberger, stroj za rezanje navojev tip Supertronic 2SE brez glave za rezanje navojev - Velikost cevi: 1/2 do 2 cola - Vretenasta odprtina: Ø 68 mm - Obratovalna napetost: 230 Voltov - Hitrost vrtenja: 40 obr/min - Nožno stikalo: z varnostno zaustavitvijo - Oprema: rezalnik cevi, notranji rezkar - Dimenzije: 500/480/V370 mm - Teža: 46,6 kg

Stanje: pripravljen za uporabo (rabljen), REMS stiskalno orodje, akumulatorska stiskalnica ACC Li-Ion Plus, rabljeni stroj Proizvajalec: Rems Tip: ACC Li-Ion Plus Skupne dimenzije: Širina: 520 mm Globina: 290 mm Višina: 120 mm Ključne značilnosti: Elektro-hidravlični pogon Stiskalna sila: 32 kN Primerno za cevi in spojke Ø 10–108 mm (v nekaterih primerih do 110 mm) Univerzalni motor: 1850 W Baterija: Li-Ion 14,4 V / 3,0 Ah (tehnologija Li-Ion Plus) Multifunkcijska elektronika: mehak zagon, zaščita pred preobremenitvijo, avtomatski povrat (ACC) Ljdpfsxl E Nfex Al Ieab 360° vrtljiv nosilec za čeljusti Vgrajena LED delovna lučka Ergonomska, lahka zasnova: približno 4,3 kg Stanje: Rabljeno, dobro delujoče. Dodatki: baterija, polnilnik.

Stanje: rabljeno, Stiskalni stroj, REMS Power-Press XL ACC, rabljena oprema Proizvajalec: Rems Tip: Power-Press XL ACC Obseg stiskanja: Ø 10 – 108 mm (do 110 mm) Tlačna sila: 32 kN Motor: 450 W univerzalni motor Napajanje: 230 V ali 110 V, 50–60 Hz Teža: približno 5,5 kg Dimenzije (V x Š x G): 800 x 335 x 230 mm Dolžina kabla: 2.900 mm Dodatki: več kot 400 vrst REMS stiskalnih čeljusti, adapterji za druge proizvajalce Ledpfx Aljxlp T Io Isab Dodatne funkcije: Samodejni povrat (Automatic Circuit Control – ACC) Vrtljiv nosilec stiskalnih čeljusti z avtomatskim zaklepanjem Združljiv z orodji čeljustmi drugih proizvajalcev Hitro stiskanje, npr. Geberit Mapress nerjaveče jeklo Ø 108 mm spoj v 15 sekundah Stiskalne čeljusti: 76,1; 88,9; 108 mm

Stanje: rabljeno, Ročna navojna naprava, navojni stroj, Ridgid navojni stroj, naprava za navoj na ceveh, stroj za rezanje navojev na ceveh, rabljena naprava Proizvajalec: Ridgid Laedpfx Aoxfk N Rjl Isb Tip: – Skupne dimenzije: 700 × 340 × 170 mm Dodatki: 1", 1 1/2", 2", 1 1/4", 1/2", 3/4", 2"

Stanje: dober (rabljeno), Glava za rezanje navojev, držalo za rezanje navojev, navojevno držalo, vpenjalni nastavek za navoje, rezkalno orodje, aparat za rezanje navojev -Proizvajalec: Pittler, samoodpirajoča glava za rezanje navojev -Tip: Model A 3 L 1018/20 -Rezalne čeljusti: niso priložene -Vrtina: Ø 31/24 mm Ljdpfx Asxc T Rlel Ioab -Vpenjanje: Ø 40 mm -Dimenzije: 130/125/V170 mm -Teža: 3,6 kg

Stanje: dober (rabljeno), Thread cutting head, thread cutting chuck, tap chuck, tapping chuck, milling tool, thread cutting device -Manufacturer: PCM, tapping tool -Type: ET1-40 -Size: Ø12 mm Lajdpfswzhgnjx Al Iob -Dimensions: Ø40 x 52 mm -Weight: 0.3 kg

Stanje: pripravljen za uporabo (rabljen), Stroj za navoj Ridgid 1224, rezalnik navojev, rabljeni stroj Splošne dimenzije: Dolžina: 1140 mm Širina: 720 mm Višina: 1110 mm Zmogljivosti: Rezanje navojev na cevi: 1⁄4″ – 4″ (8 – 100 mm); 4″ – 6″ (100 – 150 mm) z dodatkom za navijanje z zobniškim prenosom 161. Rezanje navojev na vijakih: 1⁄4″ – 2″ (6 – 52 mm). Lastnosti: Navijanje navojev na cevi 1⁄4″ – 2″ pri 36 obr/min in na cevi 2½″ – 4″ pri 12 obr/min. Model 1224 je primeren za navoj različnih vrst cevi, vključno s črnimi, pocinkanimi, s plastično prevleko, kot tudi nerjavne cevi, IMC cevi ter cevi in palice z debelo steno do 30 Rockwell C trdote. Indukcijski motor zagotavlja, da raven hrupa ostaja v zakonsko dovoljenih mejah. Posebni motor s zagonom na kondenzator/kondenzatorskim delovanjem omogoča poln obseg navijanja tudi pri padcu napetosti. Uporablja univerzalno glavo za navoje 1⁄4″ – 2″ in nastavljivo glavo 2½″ – 4″ za rezanje stožčastih ali ravnih NPT/NPSM ali BSPT/BSPP navojev. Stalno in pravilno mazanje nožev in obdelovancev preko mazanja skozi glavo. Tehnične specifikacije: Motor: 1,1 kW, enofazni, 50 Hz, indukcijski tip. Stikala: robustno rotacijsko stikalo za vzvratno vožnjo / izklop / naprej in vgražena stopalka. Hitrost vretena: 36/12 obr/min. Menjalnik: dvostopenjski prenos z razmerjem 3:1. Vpenjalna glava: kladivna izvedba z zamenljivimi vložki. Zadnja centrirna naprava: izvedba z ekscentričnim odmičnikom. Rezalnik za cevi: model 764, popolnoma samonastavljiv in samozcentrirajoč, z rezilom F-229 za cevi od 1⁄4″ do 4″. Razširjevalec (rahljalnik): model 744, z rezili, 1⁄4″ – 4″. Lasdpjwwgvysfx Al Isb Mazanje: skozi glavo za navoje. Črpalka: samozasenčna, zobniška, samodejno reverzirajoča, s konstantnim pretokom.

Stanje: dober (rabljeno), Thread cutting machine, pipe threader - Manufacturer: Ridgid, thread cutting machine type 535 - Pipe size: 1/8 to 2 inches - Spindle bore: Ø 64 mm Ledpfewub Ekex Al Ieab - Operating voltage: 230 Volt - Dimensions: 1080/700/H1140 mm - Weight: 128 kg

Stanje: rabljeno, Leto izdelave: 1978, Thread diameter: 52 mm Thread length: 500 mm Thread pitch: as specified Hollow spindle diameter: 54 mm Spindle speeds: 25 – 140 rpm Speed settings: 6 steps Power supply: 380 V / 50 Hz Main drive motor: 3 kW Total power requirement: 4.5 kW Machine weight: approx. 0.75 t Space requirement: approx. 1.0 x 1.8 x 1.4 m Equipped with pneumatic workpiece clamping, Lsdpfx Aowt T Uhol Isab Thread cutting head Z 52, Coolant system, 2 sets of die holders, size Z52/2B + 21B 5 sets of chaser jaws, for pitches from 1 – 2.5 mm The machine is in good condition.

Stanje: dober (rabljeno), Thread cutting machine, pipe threading machine, threading head, thread cutting chuck, threading chuck, thread cutting device - Manufacturer: Rems, threading head - Pipe size: 2 1/2 to 4 inches - Spindle bore: dimensions see photos - Dimensions: 410/400/H340 mm - Weight: 50 kg Lodpfewq Nvijx Al Ieab

Stanje: dober (rabljeno), quick-release device, quick-release clamp, quick-release vise, drilling jig, machine vice, drill press vice, clamping sleeve, collet - Thread cutting head: self-opening thread cutting head Laodpfx Aljv Uw Ams Ieb - Type: CH7-44 - Mount: M48 - Collet: Ø 25 mm - Dimensions: 330/210/H135 mm - Weight: 17.4 kg

Stanje: dober (rabljeno), Thread cutting head with die chasers, thread cutting stock, thread cutting machine, pipe thread cutter, cutting head, bolt cutting head, thread cutting chuck Ljdpfev T Ufcjx Al Ioab - Manufacturer: Efem, thread cutting head/thread chaser with four-jaw chuck, type G3 - Chasers: not included in delivery - Bore: Ø 27 mm - Mount: Ø 40 mm - Dimensions: 160/130/H175 mm - Weight: 3.8 kg

Stanje: zelo dobro (rabljeno), REMS TORNADO 2010 THREADING MACHINE Product Description: - Reliable, highly efficient machine for threading, cutting, deburring, threading nipples, and flaring - For use in installations, locksmith workshops, and production plants - Robust, compact, and ergonomic design suitable for both construction sites and workshops - Operating principle: rotating material – stationary tool - Automatic: clamping chuck, universal threading head, lubrication and cooling - Large working area and chip tray - Adjustable material support - Exceptionally powerful and fast drive, e.g., 2” thread in just 15 seconds - Fully maintenance-free gearbox in a sealed oil bath - Two types of base available: - Portable version on 3 legs, with detachable large oil pan and chip tray - T-stand version with integrated larger oil pan and chip container, suitable for tabletop use. Fixed base or mobile carriage with material shelf for easy transport, optimal working height, stable – available as an optional accessory - Three high-performance motor options: - High-efficiency universal motor, 1700 W, overload protection, rotation speed 53 rpm - Capacitor motor, 2100 W, overload protection. Two speed settings: 52 and 26 rpm, also under full load. Very quiet operation - Three-phase motor, 2000 W, overload protection. Two speed settings: 52 and 26 rpm, also under full load. Very quiet operation - Convenient two-stage foot safety switch with emergency stop, enabling operation using full body weight - Two automatic clamping chucks with self-centering jaws. Material can be clamped and released quickly and easily - Self-tightening chucks ensure maximum holding strength - Strong, reliable pump with high delivery capacity - Optimum multi-directional supply of threading lubricant through the threading head ensures clean threads and long tool, gearbox, and motor life - Single automatic universal die head for all thread types, including extended threads; automatic opening with thread length control for tapered threads - Quick and easy thread size adjustment Lajdpfjv T Truox Al Isb - Clear thread size scale - Easy and quick die changing thanks to positioned mounting - Reliable, indestructible, high-quality REMS threading dies with optimal geometry guarantee easy material entry, light threading, and clean threads. Made from high-strength, specially hardened steel for exceptionally long life - Self-centering pipe cutter. Stable forged steel yoke. Ergonomic wide handle for strong spindle pressure - Specially hardened cutting wheel made from tough, high-grade tool steel ensures long service life - Internal deburrer: stable, easy-to-use deburring device with adjustable deburring position - Specially hardened and ground blade guarantees easy deburring and exceptionally long life - Two blades for optimum burr removal, especially on small pipe diameters

Stanje: rabljeno, Leto izdelave: 1968, Thread diameter: 52 mm Thread length: 500 mm Thread pitch: as specified Hollow spindle diameter: 54 mm Spindle speeds: 25 - 140 rpm Speed settings: 6 steps Power supply: 380 V / 50 Hz Laodov N N Scspfx Al Ieb Main drive motor: 3 kW Total power requirement: 4.5 kW Machine weight: approx. 0.75 t Space requirement: approx. 1.0 x 1.8 x 1.4 m Equipped with motorized workpiece clamping, Thread cutting head Z 52, Coolant system, 2 sets of tool holders, size Z52/2B + 21B 5 sets of die jaws, for 1 to 2.5 mm pitch The machine is in good condition.

Stanje: dober (rabljeno), Thread cutting head, tapping chuck, thread chuck, tap chuck, milling tool, thread cutting device -Manufacturer: PCM, tap wrench -Type: ET1-32 -Size: Ø 10 mm -Sale/Price: complete Ledpfxovv Up Hs Al Ijab -Dimensions: Ø32 x 44 mm -Weight: 0.2 kg

Stanje: dober (rabljeno), Thread cutting head, tapping chuck, thread chuck, thread tapping chuck, milling tool, thread cutting unit - Manufacturer: PCM, thread tapping collets, 4 pieces - Model: ET1-40 Ljdpfjvv Ufbex Al Ieab - Size: 1x Ø9 mm / 2x Ø10 mm / 1x Ø12 mm - Sale/price: as a complete set - Shipping dimensions: 80/80/H52 mm - Weight: 1.2 kg

Stanje: dober (rabljeno), Thread cutting head, thread cutting chuck, thread chuck, tapping chuck, milling tool, thread cutting device Lsdpfxjvv S I Te Al Ijab - Thread cutting head: self-opening thread cutting head - Type: Model A3 - Shank: Ø 40 mm - Dimensions: 118/12/H170 mm - Weight: 3.7 kg

Stanje: dober (rabljeno), Thread cutting head with Strehler jaws, pipe thread cutter, threading die stock, hand thread cutting die stock, threading die stock set, ratchet threading die stock - Manufacturer: LUX, Hand Thread Cutting Die Stock Set 541 424 - Threading dies: R1/2", R3/4", R1", R1 1/4", 1 ratchet handle Laodpfx Aevmhfpel Ijb - Carrying case - Case dimensions: 360/340/H100 mm - Weight: 5.4 kg

Stanje: dober (rabljeno), Leto izdelave: 1990, Naprave za rezanje navojev z dodatno opremo, proizvajalec SONE, tip 2000, 230V. Laedpfx Alovk D Rps Ieb

Stanje: rabljeno, Thread cutting head, tap chuck, threading chuck, tapping chuck, milling tool, thread cutting device -Manufacturer: Alfred H. Schütte, self-opening thread cutting head -Type: SH 1 1/4" -Shank: Ø 40 x 100 mm -Dimensions: 170/155/H225 mm -Weight: 8.6 kg Lasdpou S Tbuefx Al Iob