Kabes

Stanje: pripravljen za uporabo (rabljen), Prodam linijo za vzdolžno spajanje lesenih elementov znamke Famad. Linija za spajanje PDFD z dvojnim rezkalnikom in stiskalnico za vzdolžno lepljenje, kjer so elementi spojeni v letvice dolžine do 7 metrov. Za več informacij pokličite: 604205076. Fsdpsyr Aduofx Abvopd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: V001363, delovna višina: 925 mm, moč: 2,2 kW (2,99 KM), Razdelilni podajalnik za transport paketov lesa: Podajalna postaja s transportnim trakom in krožno nameščenimi verižnimi predali za avtomatsko dovajanje paketov lesa na rezkalnik za zobate spoje. Paketi obdelovancev se ročno polagajo v predale, počasi se dozirajo na integriran transportni trak in avtomatsko podajajo stroju. Tehnični podatki: Delovna višina: 925 mm Širina paketa: 600 mm Vgrajena moč: 2,2 kW Fodpfx Abjyqxa Njvspd Oprema: Ognir stroja, po višini nastavljiva stojala Transportni trak, fiksno nastavljen na delovno višino Vodilni elementi, krožni pakirni predali Število predalov: 4 Cena iz tovarne z lastnim prevzemom (EXW) Prodaja brez garancije, vračila in jamstev. Prodano kot vidno.

Stanje: dober (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Linija za spajanje z mikrozobmi. V omarah so bili frekvenčni pretvorniki zamenjani z novimi. Fpodpfjynkzgex Abvjd

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2010, obratovalne ure: 200 h, Funkcionalnost: popolnoma funkcionalen, Linija za vzdolžno spajanje, kot nova, delovala samo 60 dni. Fpodpoyl Nuajfx Abvsd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, AVTOMATSKA PREŠA ZA LEPLJENJE LESA NA DOLŽINO 3 METRE Fpsdpfx Abeylqc Eeved

Stanje: rabljeno, Leto izdelave: 2011, Working width: from to 80-120 mm Working height: from to 30-80 mm Working length: 1200-1600 mm GÖTZINGER Finger Jointing Line - Year of manufacture: 2011 - Ex works, loaded free of charge - On behalf of customer Technical Data: Minimum - maximum workpiece width: 80-210 mm Minimum - maximum workpiece height: 30-80 mm Minimum - maximum workpiece length: 1200 - 6000 mm Finger jointing shaper: - Feeding speed: 0-4 m/min - Operating pressure: 6 bar - Air consumption: 6 l/min - Cycle time: 2 - 6 pieces - Table height: adjustable via over 50 levelling feet - 900 mm - Weight: 520 kg - Extraction ports: 1 x120 mm, 2 x 80 mm - Air velocity: 25 - 30 m/sec Fpodpoyk H U Iofx Abved - Air requirement: 6 - 8 m³/min - Shaper motor: 7.5 kW / 380 V / 50 Hz - Speed: 6000 rpm - Workplace-related emission value: according to DIN 45637 - Idle noise level: 82 dB(A) - Operating noise: 85 - 87 dB(A) - Length: 2.25 m - Width: 1.70 m - Height: 1.80 m - Base colour: RAL 7030 - Accent colour: RAL 5007 Gluing station: - Glue pressure adjustable from: 0 - 20 bar - Spray pressure adjustable from: 0 - 4 bar - Glue tank: for 10 kg white glue - Wide-spray valves: 2 - Spot-spray valves: 2 - Length: 1.50 m - Width: 0.50 m - Height: 1.20 m - Weight: 90 kg - Base colour: RAL 7030 Finger joint press: - Axial pressing force: 10,000 daN - Maximum operating pressure: 200 bar - Electrical connection: 4.0 kW / 380 V / 50 Hz - Working height: 900 mm Cross-cut saw: - Extraction port: 1 x 80 mm - Air velocity: 25 - 30 m/sec - Air requirement: 6-8 m³/min - Motor speed: 3000 rpm - Saw blade: 400 mm, bore 30 mm - Saw stroke: 300 mm - Length: 0.50 m - Width: 0.60 m - Height: 1.50 m - Weight: 80 kg Powered roller conveyor: - 260 x 3000 mm - Manufacturer: Haberkorn Total connected load: - Total connected load: 30 kW - Main fuse: 50 Ampere - Operating voltage: 3 x 380 V - Frequency: 50 Hz - Control voltage: 24 V DC - Voltage tolerance: +/- 5% - Air pressure: 5 - 6 bar

Stanje: rabljeno, Leto izdelave: 2021, Delovna širina od do 100-400 mm Delovna višina od do 20-150 mm Mere (dolžina/širina/višina) 2200x1650x1600 mm Teža 1300 kg Fjdpfsyk H Syox Abvepd rabljena WINTER čelni lepilni stroj MXB 3515A z lepilno enoto - Leto izdelave 2021 - Serijska št. 231 - Preverjeno delovanje - Debelina lesa min./max. 20 - 150 mm - min. dolžina obdelovanca 100 mm - maks. delovna širina 450 mm - Delovna miza 500 x 650 mm - Premer vretena rezkalnika 50 mm - Premer vretena sekalnika 30 mm - Hitrost vrtenja vretena rezkalnika 6750 obr/min - Hitrost vrtenja sekalnika 6750 obr/min - Moč motorja rezkalnika 11,0 kW - Moč motorja sekalnika 4,0 kW - Moč motorja hidravlične enote 2,2 kW - Skupna moč 17,2 kW - Napetost 400 V, 50 Hz - Hidravlično upravljanje - Rezkalna miza vodena po preciznih THK linearnih vodilih - Upravljanje s stopalko - Lepilna postaja - Priključek za stisnjen zrak 6 bar - Dimenzije D=2200, Š=1650, V=1600 mm - Teža 1300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, WEINIG GRECON HS 120 – FINGER JOINTING LINE FOR WOOD Basic data: Model: GRECON DIMTER HS 120 LI Manufacturer: WEINIG (Germany) Machine type: finger jointing line Year of manufacture: 2014 Year of last upgrade: 2022 (extension with ABB automatic loading) Net price: EUR 399,000 A) Finger Jointing Line Specification - WEINIG GRECON HS 120 finger jointer (2014) with brush-type feeder for wooden elements - Two through-feed milling units for finger joint profiles - Automatic glue spreader with quality control (GlueEye Vision system) - Pre-jointing station - Clamp press with pressing length approx. 6.1 m (6100 mm) - Integrated line with ABB robot – automatic loading of finger jointer - Automatic glue suction from 1,000 L IBC tank with agitator Robotic loading: - 4-axis ABB IRB 6640 robot - Two palletising cells for continuous operation - Maximum element length handled by robot: 110 to 600 mm - Year of robotic cell installation: 2021 Material handling: - Roller conveyor system with turntables feeding material to robot cell - FAMAD DBNA-40T DUO scissor lift at the press (automatic height adjustment, table 6.0 x 1.3 m) - Roller buffer storage for finger-jointed strips – buffer lanes 82 linear metres B) Technical parameters Dimensions and material range: - Infeed wood length: 110 – 900 mm - Max material width: 150 mm - Max material thickness: 50 mm - Pressing segment length: approx. 6100 mm - Number of milling stations: 2 - Number of scoring saws: 4 Drive and power: - Total connected load: 75 kW Fpsdpfx Absyk E H Njvod - Machine weight: approx. 12,800 kg Space and installation: - Required machine length: approx. 14 m - Required width: approx. 10 m Utility requirements: - Electrical power 400 V / 3 phase - Compressed air - Extraction system for chips and dust - Internet access (control and diagnostic systems) C) Application of the GRECON HS 120 line The GRECON HS 120 line is designed for through-feed finger jointing of short wood elements to produce continuous lamellas up to approx. 6,100 mm in length. Applications include production of: - furniture boards - worktops - structural timber components - solid wood profiles and blanks D) Personnel and operator requirements The GRECON HS 120 line with ABB automatic loading (2 pallet cells, alternating operation) requires just 1 operator. E) Production process 1. Pallets with pre-sorted timber elements are placed in the loading cell. 2. The ABB robot picks elements from the pallets and feeds them to the GRECON HS 120 buffering conveyor. 3. The line mills male and female finger joints in through-feed operation. 4. The automatic glue spreader applies adhesive (application monitored by GlueEye Vision system). 5. The pre-jointing station assembles elements to the desired length. 6. Cross-cut saw trims the lamella to programmed length and transfers it to the press. 7. The press holds the element until the glue has fully set. 8. Finished lamellas are placed on the scissor lift, quality checked, and transported to the buffer roller storage.

Stanje: rabljeno, Leto izdelave: 2020, Working width: from 50 to 150 mm Working height: from 20 to 50 mm Working length: 1,000 – 6,000 mm Fpsdpeyhq Umsfx Abved Götzinger Finger Jointing Line KZA ----- For sale on behalf of customer! The plant has been professionally dismantled and packed! ----- The machine was used for board material Year of manufacture: 2020 Infeed length: 500 – 5,000 mm Finished length: 1,000 – 6,000 mm (longer versions available) Wood thickness: 20 – 50 mm Width: 50 x 150 mm Pressing force: 50 cm² (approx. 5 tonnes) Performance (cycle time): 2 – 3 joints per minute The line consists of: - Cross conveyor infeed - Finger jointing miller (2 milling motors, each 4 kW), horizontal finger profile (side fingers) - Roller conveyor - Gluing device for PU adhesive with two application valves (requires servicing) - Hydraulic finger joint press, 5 t pressing force - Cut-off saw with measuring wheel - Outfeed roller conveyor with pusher Loading dimensions: 1 articulated lorry ----- Price of the above-mentioned machine on request! ----- (Technical data according to manufacturer – no guarantee!) All prices quoted are net, plus statutory VAT.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, Avtomatski čopilni stroj MLKT po generalni obnovi z avtomatskim dovajanjem lepila Fpjdpfx Abeyhnpnevod

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, WEINIG GRECON HS 120 – FINGER JOINTING LINE Basic Information: Model: GRECON DIMTER HS 120 LI Manufacturer: WEINIG (Germany) Machine type: finger jointing line Year of manufacture: 2018 Year of last modernization: 2022 (upgrade: ABB automatic infeed) Net price: €499,000 A) Finger Jointing Line Specification - WEINIG GRECON HS 120 finger jointer (2018) with brush infeed system for wooden elements - Two throughfeed finger jointing cutters - Automatic glue applicator with quality control (GlueEye Vision system) - Pre-jointing station - Press with pressing length approx. 6.1 m (6,100 mm) - Integrated line with ABB robot – automatic infeed to the finger jointer - Automatic glue extraction from a 1,000 l IBC with agitator Robotic Loading: - ABB IRB 6640 four-axis robot - Two pallet cells enabling continuous operation - Max. length of elements handled by robot: 110 to 600 mm - Year of robotic cell construction: 2021 Material Handling: - Roller conveyor system with turntables for feeding workpieces to the robot cell - FAMAD DBNA-40T DUO scissor lift at the press (automatic height adjustment, table 6.0 x 1.3 m) - Roller buffer for storing finger-jointed strips – laydown area 82 m B) Technical Parameters Material size and range: - Infeed length: 110 – 900 mm - Max. material width: 150 mm - Max. material thickness: 50 mm - Pressing section length: approx. 6,100 mm - Number of milling stations: 2 - Number of scoring units: 4 Fpedpfx Abjyhm R Rsvod Drive and Power: - Total connected load: 75 kW - Machine weight: approx. 12,800 kg Space and Installation Requirements: - Required floor length: approx. 14 m - Required width: approx. 10 m List of utility connections required for the production line: - Electrical power 400 V / 3-phase - Compressed air - Chip and dust extraction - Internet access (control and diagnostic systems) C) Application of the GRECON HS 120 Line The GRECON HS 120 line is designed for throughfeed machining and finger jointing of short solid wood elements into continuous lamellas up to approx. 6,100 mm in length. Used for production of: - furniture panels - countertops - construction elements - battens and solid wood semi-finished products D) Operators The GRECON HS 120 line with ABB automatic infeed (2 pallet cells, alternate operation) requires just 1 operator. E) Production Process 1. Pallets with pre-sorted wooden elements are delivered to the loading cell. 2. ABB robot picks elements from pallets and feeds them onto the GRECON HS 120 infeed conveyor. 3. The line performs throughfeed machining of male and female finger profiles on the elements. 4. Automatic glue applicator applies adhesive (monitored by GlueEye Vision system). 5. Pre-jointing station assembles the elements to the specified length. 6. Cross-cut saw trims the lamella to the set size and feeds it to the press. 7. Press clamps the lamella until the adhesive is fully cured. 8. Finished lamellas are deposited on the scissor lift, undergo quality control, and are transported to the roller buffer store.

Stanje: rabljeno, Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, Profi-Joint Shaper Model 2016 Dvostopenjska stiskalnica 6000 mm Fpjdpoyb Ui Ijfx Abvsd Vključuje črpalko in nanašalec PUR lepila Cena: 100.000 AUD (brez DDV in davkov) Dodatno: Odsesavanje žagovine AUD$20.000

Stanje: dober (rabljeno), Leto izdelave: 2010, Finger Jointing Line WEINIG NKT Doppel-Pack DP20 An industrial finger jointing system – engineered for maximum precision and efficiency Technical Specifications: - Wood infeed length: min. 130 mm | max. 1000 mm - Wood outfeed length: min. 3700 mm | max. 7400 mm - Wood cross-section: min. 20 x 40 mm | max. 80 x 180 mm - Cutter diameter (): 370 mm - Finger joint execution: Vertical / Horizontal, 10/11 fingers, 3.8 mm pitch - Glue application: double-sided, PVAC white glue - Connected load: 80 kW Note: The machine is currently dismantled and stored at our facility. Viewing is possible by appointment. Scope of Delivery: - WEINIG NKT Doppel-Pack DP20 incl. control unit - Integrated glue station for double-sided application - Operating manual & documentation Hydromat 17B (7-spindle) Fpedpfx Asx Ti Rfebved General Information - Manufacturer: Weinig AG - Model: Hydromat 17B // 7 spindle (various tooling) - Type: High-performance profile milling machine / planer and moulder - Year of manufacture: 1989 - Operating voltage: 380 V / 50 Hz - Bottom-Right-Left-Right-Left-Top-Bottom, fixed table Description: Heavy-duty, high-performance planer and moulder built from vibration-damping and torsion-resistant cast components in modular design. Designed for precise and economical wood processing with high continuous capacity. Mechanical feed, adjustable from 5 – 35 m/min, feed motor 5.5 kW (7.5 HP). 2 m long jointer table, quick adjustment available. Cutting depth adjustment for jointer and planer spindles, adjustment range 10 mm each. Technical Data: • Feed speed: 5 – 35 m/min, mechanical • Feed motor: 5.5 kW / 7.5 HP • Operating voltage: 380 V / 50 Hz • Table length: 2000 mm • Adjustment range cutting depth: 10 mm (jointer and planer side) • Machine version: Without opposing bearing, high-performance version • CNC control: Siemens S5-130 WB, with battery-buffered RAM memory

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Dražba Weinig stroja za spojne zareze! Fedpox Rbl Nsfx Abvepd

Stanje: zelo dobro (rabljeno), DIMTER HK 400 – AVTOMATSKA LINIJA ZA SPOJEVANJE NA MIKROUTORE Fsdjxvniispfx Abvopd Naprodaj je popolnoma avtomatska linija za spajanje lesa na mikroutore DIMTER Tip HK 400 E/D. Gre za napreden sistem, zasnovan za maksimalno izkoriščenost in kakovost spajanja trdega in mehkega lesa.

Stanje: rabljeno, Leto izdelave: 1997, Linija za lamelno spajanje Dimter Profi Joint 600 KD Pretok linije je bil 2,5 deske na minuto. Dimenzije deske: D = 900 mm, V = 180 mm, Š = 600 mm. Če je največja prostornina ene polne deske 0,081 m³ x 2,5 = ~0,2 m³, je mogoče material naložiti v stroj v eni minuti. Vendar pa to neposredno zavisi od velikosti naloženega surovega materiala. Linearni metri: V eni 8-urni izmeni smo obdelali 10.000–12.000 metrov. Fodpexmvxyofx Abvepd Uporabljali smo surovino debeline 24 mm in širine 98 mm. Dolžina surovine se je gibala med 200 in 60 m. demontirano

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, Funkcionalnost: popolnoma funkcionalen, dolžina podajanja os X: 13.000 mm, dolžina pomika po osi Y: 240 mm, dolžina podajanja os Z: 100 mm, hitrost pomika os X: 25 m/min, stiskalna sila: 40 t, vhodna napetost: 400 V, skupna višina: 1.120 mm, delovna višina: 1.120 mm, dolžina vretena za rezkanje: 330 mm, krmilna napetost: 400 V, višina obdelovanca (maks.): 100 mm, premer orodja: 240 mm, največja hitrost vrtenja: 6.000 obr/min, zračni tlak: 7 letvica, skupna dolžina površin za skobljanje: 13.000 mm, Wir bieten eine vollautomatische Produktionslinie zur Herstellung von KVH-Bauholz an. Sie verfügt über eine vollständige CE-Zertifizierung sowie eine Zertifizierung des Holztechnologischen Instituts in Poznań. Entspricht den Normen ENPN 14.081 und 14.081. 1. Schräg-Abnahmeförderer 2. Aufgabetisch zur visuellen Holzklassifizierung 3. Puffer vor dem Fehlstellenauskapper 4. Automatischer Fehlstellenauskapper mit Kamera für fluoreszierende Kreide 5. Puffer vor der Keilzinkenanlage Fjdpfxoxfzyye Abvepd 6. Keilzinkenanlage mit Leimauftrag und Längensäge bis zu 13 m 7. Kettenmagazin-Förderer von der Leimstation zur Vierseitenhobelmaschine 8. Automatischer Einzug zur Vierseitenhobelmaschine 9. Vierseitenhobelmaschine Winter 6-33 10. Rollenabnahmetisch nach der Vierseitenhobelmaschine 11. Verpackungsautomat für gehobeltes Holz 12. Kettenförderer 13. Festigkeitsprüfgerät für Brettschichtholz

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Prodajamo našo paketno linijo za prstno spajanje konec leta 2025/začetek leta 2026, od vakuumskega razstavljanja (slika 1) do stiskalnice za prstne spoje, vključno z odrezovalno žago (slika 11); zgolj žage za izrez napak ne prodajamo. Paketna prstna spajalna linija HK 250 L, letnik 1995 (glej sliko 7), kjer sta bila leta 2013 zamenjana krmiljenje in stiskalnica za prstne spoje. Lepljenje poteka po podmešalnem postopku z lepilnimi valji (slika 6). Krmiljenje za celotno linijo in stiskalnico je bilo obnovljeno s strani podjetja Somako. Do konca leta 2025 se bo s strojem še vedno proizvajalo, zato je možen ogled v tekoči proizvodnji. Cena je odvisna od tega, ali se kupi celoten stroj ali le posamezni deli. Možna je tudi prodaja posameznih komponent kot rezervnih delov. Fodpow Uf Tkjfx Abvopd

Stanje: zelo dobro (rabljeno), Linija za spajanje lesa FAMAD PDFD-I 1. Rezkalno-čepilni stroj FAMAD DFC-60M Dolžina vhodnih elementov: 170-900 mm Višina rezkanja: 20-155 mm Širina paketa rezkanih elementov: 650 mm Delovna hitrost vozička: Delo: 10-23 m/min Povratek: 32 m/min 2. Pralna enota PHSL Širina lepljenih elementov: 35-155 mm Debelina lepljenih elementov: 20-70 mm Dolžina zlepljenega elementa min/max: 4500-6600 mm Možnost programiranja vmesnih rezov Učinkovitost linije do 4000 m/b na izmeno 3. Splošne informacije Dolžina: 15700 mm Širina: 3350 mm Fpsdpfx Abow Iy Nyjved Poraba energije: 48 kW Leto izdelave: 2006 Stanje: zelo dobro

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2007, The single-spindle PDFD joining line consists of two main units: the DFC 60M tenoning-mortising machine (used to process the ends of slats) and the PHSL finger-jointing press, where the elements are assembled into slats of up to 6.6 meters in length. Input package width for the tenoning-mortising machine: 650 mm Width of laminated elements: 30 ÷ 155 mm Length of laminated elements: 170 ÷ 900 mm Thickness of laminated elements: 20 ÷ 70 mm Fpjdpfxew Hrm Ne Abved Compressed air requirement: 18 m³/h Operating efficiency, cycles/min.: approx. 2 (slat 6600) Length of jointed element: up to 6600 mm The machine is in excellent technical condition!

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, WORKING DIMENSIONS 250x150 mm MILLING MOTOR 50 HP HYDRAULIC POWER PACK MOTOR 20 HP PRESSING FORCE 40T Fpsdpfxjw E Etye Abvod MAXIMUM WORKING SECTION 250x150 mm OUTFEED ROLLER CONVEYOR NOT INCLUDED

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 200 t, širina mize: 300 mm, višina reza z zareznim rezilom (max.): 100 mm, dolžina vretena za rezkanje: 250 mm, Equipment: 1 GRECON feed transfer system with accumulation of 4 to 5 cleared laths of varying lengths for finger jointing 1 GRECON double-end finger jointing machine for deep notches (suitable for glued laminated timber beams) 1 180° transfer unit with two-component gluing system 1 GRECON finger jointing press Fodowz H Anspfx Abvepd 1 CNC-controlled cross-cut saw 1 outfeed table

Stanje: rabljeno, Price on request. Comprising: Minda quality sorting line for stack and lamella dimensions Stack width: max. 1,200 mm Stack height: max. 1,200 mm Stack length: 2,000–5,000 mm Stack weight: max. 3 t Lamella width: 80–260 mm Lamella thickness: 23–80 mm (typically 46 mm in shelving) Cross-section: max. 80 x 260 mm = 208 cm² Capacity of vacuum stacking with lifting column: Section I: 3 layers/min Fpodpfxjwwg Ams Abvod Section II: 2 layers/min Finger jointing by Grecon Destacking, planing line, and transverse transfer platforms by Minda

Stanje: rabljeno, Leto izdelave: 2004, WEINIG GRECON DOUBLE-END FINGER JOINT LINE MOD. PJ 150/500 - CE - USED - Infeed wood length: 150 - 700 mm - Wood width: 40 - 150 mm - Wood thickness: 18 - 80 mm - Press length: 6100 mm - Pressing force: 120 kN - Milling motor: 15 kW Fodpewry I Eefx Abvspd - Scorer: 5.5 kW - Year: 2004 CE

Stanje: novo, Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, dvostranski, Line for longitudinal jointing with two milling machines. The press is 6000 mm long. The machine is new and has never been used. All corresponding tools are included with the machine. Fpodpfxswptnmo Abvod