Jantec

Stanje: rabljeno, številka stroja/vozila: 008159, Tip pritrjene robne letve: tanka rob, močna rob, masivni les Lepilni sistem: EVA Spojno rezkanje: da Kdjdjxp Hk Eopfx Ah Dou Multifunkcijska enota: da Maks. podajalna hitrost: 11 m/min Maksimalna debelina plošče: 50 mm Delovne enote: 6 št.

Stanje: rabljeno, številka stroja/vozila: 008199, Tip nameščene obrobe: tanka obroba, debela obroba Leplilni sistem: EVA Večnamenski agregat: da Maksimalna debelina plošče: 60 mm Ksdpoxp Hkljfx Ah Dodu Delovni agregati: 1 kos

Stanje: zelo dobro (rabljeno), SINGLE-SIDED EDGE BANDING MACHINE (LEFT) Edge thickness in rolls (min/max): 0.3 / 3 mm Veneer edging possible up to max. 1.0 mm (restricted) Panel thickness (min/max): 8 / 60 mm ICOS Open control unit Feed speed m/min (adjustable): 6 - 30 Top pressure driven by V-belt Sprayer unit (for liquid anti-stick agent) Adjustable fence, CNC controlled – Panel infeed system 63.152 (500 x 500 mm) Jointing unit with CNC control 08.379 (4.0 kW x 2) – Edge pressure zone (CNC controlled) Gluing section (P.U.R. adhesive + pre-melter) VTG + 283.203 Edge magazine for rolls (No. 1 + 6 compartments) Pre-milling unit 08.055.0.1680 (1.85 kW x 1) End trimming unit 08.42/30/B (0.66 kW x 2) 20 + 30 m/min (0°-25°) Milling unit 08.0587 (1.0 kW x 2) multi-profile – (1 + 3 profiles) Sprayer units (for sliding fluid) Contour milling unit (for fine trimming) CNC controlled – KFA 20 (0.18 kW) 20 m/min Multi-profile scraper unit (CNC controlled) 08.516 (4 profiles) Flat scraper unit 08.521 Sprayer unit (for polishing fluid) Buffing unit 08.617-2 (0.18 kW x 2) Ksdpfx Ahsxp E R Do Dsdu Standard milling unit for grooving/rebating 08.190 (4.5 kW x 1) 90°/180°/270° (CNC controlled)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, maks. debelina roba: 3 mm v roli / 8 mm v traku Enota za rezanje role Krožna žaga Poravnalni rezkar, kombinirani rezkar Dimenzije: približno 3300 x 1400 x 1300 mm (DxŠxV) Teža: približno 550 kg Kdodsxpu N Nspfx Ah Dsu

Stanje: rabljeno, Leto izdelave: 2008, Used machine Year of manufacture: 2008 Edge thickness PVC: 0.4 - 2.0 mm Panel thickness: 10-45 mm Edgebanding from roll automatic end trim unit Flush trimming unit for flush and radius trimming (r = 2 mm) Motor: 0.37 kW - 9000 rpm Extraction connection: 2 x 60 mm Heating capacity: approx. 1150 W Kdedpfxexppwbs Ah Dsu Total power: 2 kW Weight: approx. 240 kg Dimensions: 2040 x 1240 x 1260 mm Availability: short-term Location: Flörsheim

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 16.073 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: T/41521, leto zadnje generalne obnove: 2025, OTT Tornado TOP + return device LIGMATECH EKOMAT ZHR 01/R/065 Year of manufacture: 2013 The machine is equipped with: RMV-40 – Automatic edge magazine, 0.4-3 mm edge thickness, end trimming shears with roller and optical sensor, shortening the edge length on the panel (saves edging material) Automatic edge feeder with optical monitoring of individual pre-cut edge strips in fixed lengths Combi Melt – Gluing zone for EVA and PUR hot-melt adhesives as well as standard cleaning granulates Machine Control: 15-inch colored touchscreen monitor, unlimited number of work programs can be stored sequentially, all preselection of machining aggregates as well as working parameters for the CombiMelt gluing system for full automation and maximum operator convenience. Electronic control – track points with high accuracy +/- 1 mm Some aggregates can be adjusted during machine loading through Beckhoff industrial PC control Work Aggregates: - F – Pre-milling: For pre-milling workpieces before glue application 2 HF motors 1.5 kW, clockwise and counter-clockwise, automatically controlled - Kc – Double end trimming unit: With 2 high-frequency motors 0.3 kW, 12,000 rpm Ksdpfsxpphaox Ah Dodu - Bfc – Rough mill: Rough milling unit for machining solid edges and pre-shaping the radius - Hft – Fine radius milling unit: With 2 high-frequency motors 0.3 kW, 12,000 rpm, double-sided, automatically adjustable - AKF – Automated copying mill as a universal milling unit: With two independent spindles for top or bottom, for longitudinal and corner processing. Automatic adjustment from chamfering for thin edge up to 1 mm to radius processing. - ZKc – Scraper unit R2 Double-sided processing, automatic control, for finishing rounded edges - FZK – Flat scraper for edge finishing and glue joint cleaning - GE – Second guide operation for feeding workpieces (can be swung in/out from the machine as needed) - GS – Spraying sliding liquid onto the edge - RS Set – With 4-fold chemical spraying and cleaning unit - ZKc – Scraper unit R1 - WE – Angular fence for precise guidance of workpieces into the edgebander Trouble-free machine in excellent condition with regular OTT (Asamer s.r.o.) maintenance. The machine is currently fully operational in production, possibility of testing – we glue PUR. Collection by the end of 2025.

Stanje: rabljeno, Leto izdelave: 2022, Debelina roba: od 0,4 do 5 mm Kjdpfsxpn Ufex Ah Djdu Debelina obdelovanca: od 10 do 45 mm Podajalna hitrost: 8 m/min. - Quick-Set sistem - Leplilni agregat z DIA rezkarji - Samodejno podajanje roba - Linearna kap žaga z radius rezkanjem - Multifunkcijski rezkalni agregat - Podvozje

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Dodatna oprema: - Enota za obrezovanje spojev Kodpfx Aoxpkvfjh Dsdu - Enota za lepljenje - Enota za odrezovanje - Enota za predrezkanje - Enota za oblikovno obrezovanje - Rezila za profilno postrganje - Rezila za površinsko postrganje - Polirna enota - Enota za utore Ta robna lepilka BRANDT KDF 890 2CU je bila izdelana leta 2011. Opremljena je z enoto za obrezovanje spojev, enoto za lepljenje, enoto za odrezovanje, enoto za predrezkanje, enoto za oblikovno obrezovanje, rezili za profilno postrganje, rezili za površinsko postrganje, polirno enoto in enoto za utore. Izkoristite priložnost za nakup te robne lepilke BRANDT KDF 890 2CU. Kontaktirajte nas za več informacij. Vrste uporabe: Robno lepljenje

Stanje: dober (rabljeno), Leto izdelave: 2022, Funkcionalnost: popolnoma funkcionalen, Einseitige Kantenanleimmaschine zum Verleimen von Kantenband mit Schmelzkleber an allen 4 Seiten eines rechteckigen Paneels, einschließlich Nachbearbeitung des Kantenbands. Kdsdpfoxpgxvsx Ah Dou

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, hitrost pomika os X: 9 m/min, višina obdelovanca (maks.): 50 mm, največja debelina roba: 5 mm, trajanje garancije: 12 meseci, HOLZ-HER robni lepilni stroj ARTEA 1020 Stroj na zalogi – možna vmesna prodaja Kodpoxpgv Uofx Ah Dodu Leto izdelave 2024 - Osnovni stroj 1020 - Upravljanje Edge Control BC15, vklj. Vi.Se. (Visual Setting) - LED osvetlitev stroja - Pripravljalna rezkalna enota - GluJet za PUR / EVA vključno z rezervoarjem - Rezkanje - Profilni strgalnik - Površinski strgalnik - Polirna enota

Stanje: rabljeno,

Stanje: zelo dobro (rabljeno), Robna lepilka SCM K100, Ksdsxpfc Hjpfx Ah Dsdu predhodni rezkarji, nanos lepila z valjčkom, zamenljiv rezervoar za lepilo, pnevmatska predreza giljotina, pritisni valji, krožna žaga za končno rezanje, rezkalna enota zgoraj-spodaj R1 – R2, profilna strgala, ploska strgala, dolžina stroja 315 cm, pomik 7 m/min, maksimalna višina elementa 50 mm, minimalna dolžina elementa 170 mm, maksimalna debelina robnega traku 3 mm, Rabljeni stroj, zelo dobro ohranjen. Možnost preizkusa pred nakupom. Možen nakup preko leasinga.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, Stroj HOMAG KAL 310/7/A3 je bil izdelan leta 2010. Gre za rabljen enostranski robni lepilni stroj z 28-pozicijskim ISAS magazinom robnih trakov, PU lepilno enoto in povratnim sistemom Boomerang. Vključuje spojno rezkalno enoto z dvema motorjema ter PU 34 lepilni sistem s kapaciteto do 6 kg/h. Idealen je za natančno lepljenje robov. Za več informacij o tej napravi nas kontaktirajte. Vrste uporabe Kodpfxoxn Uwqo Ah Dsdu Lepljenje robov

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, Dodatna oprema Mobilna konzola s integriranim PC 'eye-M': 21,5" LCD u boji s 16/9 touchscreen zaslonom / AAR sustav protiv prianjanja ljepila: smješten ispred jedinice za poravnavanje rubova ploče / Raspršivač: uređaj za hlađenje i obradu ljepila na rubu, pozicioniran radi završne obrade / Utovarivač za uske komade: uređaj za olakšano ručno utovarivanje uskih kvadratnih komada Ova SCM STEFANI MD kantiralica proizvedena je 2021. godine. Nudi automatiziranu obradu rubova za masivno drvo debljine do 15 mm (uz opciju za 22 mm). Stroj uključuje posudu za ljepilo "SGP" pogodnu za EVA i PUR ljepila, što omogućuje idealan spoj. Sustav upravljanja 'Startouch' ima 12” touch-screen ekran, prilagodljive radne programe i grafičku simulaciju obrade. Idealan je za visoku produktivnost uz brzinu rada do 25 m/min. Kontaktirajte nas za više informacija. Područja primjene: Kodpfxoxn Ux Ue Ah Dsdu Obrada rubova (kantiranje)

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oblepilka SCM K560HP - leto 2020. POPOLNI SERVO POGONI Servisirana pri pooblaščenem servisu SCM Popolnoma delujoča, stalno v uporabi. Načrtovana demontaža stroja: januar/februar 2026 Celoten opis funkcij na priloženih fotografijah Kjdpfoxn T Sgex Ah Djdu Možnost ogleda in preizkusa na kraju samem.

Stanje: dober (rabljeno), Koda: 0680 Znamka: BIESSE Model: AKRON 430/AT - CE standard Avtomatski robni lepilni stroj z enoto za brušenje, namenjen robnemu lepljenju masivnega lesa, iverne plošče, furnirja, PVC-ja, ABS-a in melaminskih plošč – CE standard – Letnik 2009 Tehnični podatki: Višina obdelovanca: 10–60 mm Kdodpfxoxn Nwrs Ah Deu Maks. debelina roba: 10 mm Minimalna dolžina obdelovanca: 140 mm Minimalna širina obdelovanca: 85 mm Hitrost pomika: 12 m/min Elektronska upravljalna plošča z USB priključkom za nalaganje podatkov – programska oprema Sintra Brusilna enota za brušenje plošč: - Št. motorjev: 2 x 2,4 HP, 12.000 obr/min - Premer orodja: 80 mm F30 H75 - Drsnike za kopiranje oblike - 2 odsesovalna priključka premera 60 mm Lepilna enota: - Izmenljiv lepilni lonec - Prostornina lepilnega lonca: 2 kg - Premer nanašalnega valja za lepilo: 25 mm - Velik pritiskalni valj: premer 100 mm - Mali pritiskalni valji: premer 80 mm Enota za čelno rezanje: za odstranjevanje presežnih robov na sprednjem in zadnjem delu - 2 motorja: vsak 1,07 HP, 12.000 obr/min - Naklon motorja: 0–15° - Maks. premer orodja: 140 mm - Drsniki za kopiranje oblike - 2 odsesovalna priključka premera 80 mm Obrezovalna enota za posnemanje robov na zgornjih in spodnjih vogalih plošče: - 2 motorja: vsak 0,87 HP, 12.000 obr/min - Naklon motorja: 0–25° - Premer orodja: 70 mm F16, višina 20 mm - Vertikalni in čelni kopirni drsniki z rotacijskimi diski - Prilagoditev višine: samodejno z zgornjo pritiskalno enoto - 2 odsesovalna priključka premera 80 mm Enota za strganje robov za fino obdelavo robov iz ABS-a: - Radialno ploščato orodje - Vertikalni in čelni kopirni drsniki z rotacijskimi diski - 2 odsesovalna priključka premera 60 mm Enota za strganje lepila za odstranjevanje ostankov lepila: - Vertikalni kopirni drsniki z rotacijskimi diski - 2 odsesovalna priključka premera 60 mm Odstranljiv nosilec za podporo plošč: - 5 odsesovalnih priključkov premera 100 mm - Bar za stisnjen zrak: 7 Skupne mere (d x š x v): 3900 x 1000 x 1600 mm Teža: 1.530 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2024, obratovalne ure: 650 h, PLC control system (incl. 15” touchscreen), hot-melt adhesive application to the workpiece for edge material up to 3 mm: jointing cutter (incl. DIA tool) up to 3 mm cutting depth, maintenance-free coated glue pot with quick-change preparation and glue drainage device, HF double-motor cross-cut saw station (approx. 12,000 rpm), HF milling station (approx. 12,000 rpm) with pneumatic milling adjustment, 2nd HF milling station (approx. 12,000 rpm, incl. pneumatic retraction unit), corner rounding unit(1), radius scraper, flat scraper (incl. pneumatic retraction unit), buffing unit, grooving saw (incl. pneumatic retraction unit), robust chain feed, ball-bearing dual pressure rollers, unit sight window on both operator and rear side, signal lamp for workpiece sequence, extendable workpiece support, feed speed up to approx. 15 m/min, edge banding for workpieces up to 60 mm thickness. Additionally, the machine is equipped with: - Quick-change unit for corner rounding - Multi-radius scraper (R1/R2) - Heated infeed fence - Chassis - Separator spray unit (panel spraying) - Cleaning agent spray unit (panel spraying) - Edge protection spray - Nesting function - Pneumatic 3-point adjustment - Multitool for HF milling station - Airtronic (for workpieces up to 40 mm thickness) - Axis package (motorized adjustment for panel thickness, edge thickness & jointing cutter depth) - Glue pot extraction hood Kdsdpfx Asxn Nvbsh Dsu In stock in Poland

Stanje: dober (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, moč: 18 kW (24,47 KM), To stroj oglašujem po naročilu stranke! Robilnik je idealen za masivne lesene robove do 20 mm debeline in do 60 mm širine! Stroj je takoj pripravljen za uporabo. Robilnik ima tudi rezkar za spajanje. Masivni robovi do širine 60 mm in debeline 20 mm se lahko lepiljo s tem strojem. Robilnik je še vedno priključen na elektriko in si ga je mogoče ogledati v obratovanju. Kdjdpfx Ahjxn Nuwe Deu

Stanje: rabljeno, številka stroja/vozila: 008162, Vrsta nameščenega roba: tanek rob, debel rob Lepilni sistem: EVA Kdsdpsxn Nfpjfx Ah Deu Spojno rezkanje: da Multifunkcijska enota: da Maks. hitrost podajanja: 15 m/min Največja debelina plošče: 60 mm Delovnih enot: 7

Stanje: dober (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 020313L, pritisk: 7 letvica, Description: Solid steel construction for high machine stability. Workpieces are conveyed on a smooth-running transport chain with plastic plates. The top pressure unit is equipped with two rows of rubber-coated rollers. Manual adjustment of the top pressure, with automatic positioning of the processing units according to the changed workpiece thickness. Mechanical digital display for panel thickness. PLC for on/off control of the motor and glue pot. Glue pot with standby function for temperature control. Start/stop function for all motors. End trimming unit for 3mm edging material. Support plate for edging rolls with a diameter of up to 800 mm. Central extraction system. Roller track as workpiece support along the entire machine length. Protective hood over all processing units. Control panel, including emergency stop button and lockable main switch. Transformer for 24V auxiliary circuit. Pre-milling unit before the gluing section, for preparing the workpiece edge for adhesive application. With adjustable stopper at the infeed. Maximum material removal: 2 mm. 2 motors, each 1.1 kW, 12,000 rpm, maximum material removal 2 mm, extraction diameter 120 mm, incl. 2 WIDIA cutting tools. Gluing section for hot-melt adhesive with rapid heating and glue application roller. System for temperature control and recycling of excess hot-melt adhesive. Power consumption: 3.5 kW, capacity: 1.5 kg, heat-up time: approx. 15 min, depending on ambient temperature and adhesive. End trimming unit With 1 saw blade for trimming the front and rear overhanging edges at a 90° angle, flush with the workpiece. Trimming of the front and rear overhangs is individually controllable as required. Motor: 0.35 kW Saw blade speed: 12,000 rpm. Flush trimming unit With 2 motors for milling radii or chamfers at the top, bottom, and/or front edge. Vertical and horizontal adjustment of the motors on hardened steel guide rails and ball bearings. Three manually adjustable positions for different edge thicknesses. Motors not tiltable. Unit complete with WIDIA cutting tools 2/3 mm. 2 motors, each 0.55 kW, 12,000 rpm. Diamond cutting tools, 68 mm Z6, R=2. Profile scraping unit Flat scraping blade Buffing unit Form trimming unit With 0.22 kW, 12,000 rpm, prismatic linear guide. Max. panel thickness: 50 mm Max. edge material thickness: 2 mm Technical data: Edging strip thickness (for manual feed) max.: 5x45 mm Pre-milled panel thickness: 10 – 40 mm Unmilled panel thickness: 10 – 60 mm Max. height melamine edging: 65 mm Max. height ABS edging: thickness 0.4-2 mm = 65 mm; thickness 2-3 mm = 40 mm Max. edge overhang top/bottom: 2 mm each Minimum workpiece width with roll material: 90 mm Kdedpfx Asxn Hzbsh Dsu Minimum workpiece length with roll material: 160 mm Adhesive temperature: 190°–210°C Feed speed: 8 m/min Inverter: 200 Hz Compressed air: 7 bar Extraction socket diameter: 2x 60 mm CE standard

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3658, moč: 9,5 kW (12,92 KM), vhodni tok: 400 A, vhodna frekvenca: 50 Hz, Ponujeni stroj izvira iz hobi delavnice in je glede na svojo starost v nadpovprečno dobrem stanju. Možen je ogled na lokaciji in predstavitev po predhodnem dogovoru. Kdodpfx Ajxnz E Ieh Dou Možna je tudi pošiljka preko špediterja. Približno 700 kg, dolžine 3 metre.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, Znamka: SCM Model: OLIMPIC K 500 T/ER-2 - CE Avtomatski robni lepilni stroj z brusilno enoto za robove iz lesa, furnirja, PVC, melamina, ABS – primeren za pohištvo, stavbno mizarstvo, opremo po meri, panele, kuhinje, kopalniško pohištvo in razne druge izdelke Tehnični podatki Min./max. višina panela: 8–60 mm Višina panela zaobljeno z rondomatom : 10–45 mm Debelina roba: 0,4–8 mm Debelina roba v roli: 0,4–3 mm Minimalna širina panela: 55 mm Hitrost pomika: 11 m/min Pritiskač z motoriziranim vertikalnim pomikom Nosilna rama za panele Zvočno izolirana zaščitna kabina Kodpfx Ahoxnvr Aj Dsdu Vhod tekočin Sestava: Enota za nanašanje anti-adhezivnega sredstva z dvema šobama – dve posodi z ločilno tekočino proti prijemanju Predrezkarji z dvema visoko-frekvenčnima motorjema – diamantna orodja H64 mm – premer 100 mm, F 30, h 65 – komplet za kopiranje Enota za lepljenje VC 560 za nanos roba na panele do 60 mm – prostornina lepilnega lonca: 1,5 kg – izmenljivi lonec Prekrajna enota z dvema neodvisnima motorjema, vsak 0,35 kW pri 12.000 vrt/min – nagib motorja od 0° do 15° – 2 žagi premera 115 mm – čelni kopirji Nagibna obrezovalna/krivilna enota za odstranjevanje presežka roba zgoraj in spodaj – 2 motorja po 0,55 kW – 12.000 vrt/min – nagib od 0° do 25° – 2-položajni pnevmatski komplet za hitro menjavo obdelave tankih ali radijus robov Zaoblitvena enota z dvema motorjema na prizmatičnem vodilu – omogoča zaobljenje in obrezovanje tankih in debelih robov – 2 motorja po 0,55 kW – 12.000 vrt/min Enota za strganje roba za optimalno dodelavo ABS/PVC roba z rotacijskimi kopirji in odsesovalno kapuco ter zbiralno kaseto za odrezke Enota za strganje lepila – odstranjuje ostanke lepila s spodnjih in zgornjih površin panela Krtačna enota za čiščenje in poliranje plastičnega roba – motor po 0,25 kW – premer krtače 150 mm Stisnjen zrak: 7 bar Skupne mere: 5500 x 1150 x 1550 (V) mm Teža: 1.780 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, The HOMAG Optimat KAL 210/6/A20/S2 is a single-sided, automatic edge banding and post-processing machine designed for maximum precision and efficiency in panel processing. It is ideal for industrial applications and professional carpentry workshops. The machine enables joint trimming of straight workpiece edges as well as the application and post-processing of various edge materials (in rolls and strips) up to 20 mm edge thickness, for both longitudinal and cross feed. Technical Data Feed speed: 18 – 25 m/min Working height: 950 mm Workpiece thickness: 12 – 40 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): up to 20 mm Pneumatic connection: 7–8 bar Operating voltage: 400 V, 50/60 Hz Equipment - Power Control PC22 control unit (Windows-based) - Release agent spraying unit, top/bottom - Joint trimming unit with 2 motors, each 3 kW - Gluing station A20 for rolls and strips - Pressure zone with 1 driven pre-press roller and 6 post-press rollers - Trimming unit HL84 - Pre-milling unit 1.5 kW - Profile milling unit FK11 - Profile scraping device PN10 and finishing unit - Automation package for chamfer/radius with pneumatic adjustment - Noise protection enclosure and individual extraction system Control & Software - Menu-guided operation via 17" TFT display - woodCommander software package for program management - Network and remote maintenance capability Special Features - CE-compliant according to EU Machinery Directive Kdedpfx Aoxnpx Aoh Dou - High-quality construction, robust design

Stanje: rabljeno, Holz Her Accura 1556 Premium Heavy-duty version with full equipment Edge thickness 0.4 - 20 mm Kdjdjxnmu Iopfx Ah Dou 18.5" touchscreen control in 16:9 format, rotatable and tiltable Synchronized belt bridge with motorized, position-controlled height adjustment Long motorized adjustable infeed fence Pre-milling unit for jointing before the gluing station with 2 NC servo axes Syncro edge magazine, fully automatic for coil and strip material MOT3, with 2 motorized hold-downs Adhesive application station GLU-JET automatic. Cartridge and PU gluing. Thin-film technology Adhesive height adjustment / contact nozzle Max. edge height 60 mm Pressure unit with 4 rollers, motorized-pneumatic. NC servo axis End trimming unit for coil and strip material up to 20 mm edge thickness, with electro-pneumatic adjustment from 0-10° angle for trimming saws Flush milling unit 20 mm MOT3, motorized horizontal adjustment. Multifunction milling unit MOT6 with multifunctional milling technology Flush milling 8 mm Radius milling R1, 3; R2 (2x) Chamfer milling up to 45° Copy milling unit MOT4, with automatic tool changer MOT2 and oscillating probe, corner copying, postforming corners, with 4 NC-controlled axes, for milling the upper and lower longitudinal edge and copy milling the front and rear vertical end edge. Working height 60 mm. R1, 3; R2 (2x); chamfer 45° Scraper unit MOT8 incl. high-gloss package and fully automatic tool changer, R1; R1.3; R2 (2x); chamfer 45° Nesting package Flat scraper unit with pre- and post-sensing Demand-controlled oscillating buffing unit for finishing and edge polishing with 2 textile discs Spray unit in infeed and outfeed area, as well as antistatic agent at the pressure unit Infeed area electronically controlled separator agent spraying device Pressure unit electronically controlled antistatic agent spraying device Outfeed area electronically controlled cleaning agent spraying device with cleaning agent Automatic chain lubrication Barcode scanner Machine has FACTORY SERVICE MAINTENANCE and is in EXCELLENT CONDITION Year of manufacture 2021 / Leasing option available Machine is connected in the demonstration center and ready for demonstration Available from stock Lieboch

Stanje: rabljeno, Leto izdelave: 2006, Homag Optimat KAL310/6/A3/S2 robilni stroj, 6-pozicijska kaseta za trak, lepilna enota Quickmelt QA3, širina strojevnega valjčnega transporterja pribl. 1100 mm, nagibni izhodni transporter za povratni trakasti transporter, upravljanje na osnovi Windows. Serijska številka: 0-200-15-4533 (2006). Država izvora: Nemčija. Strošek razstavljanja in natovarjanja na primerno prevozno sredstvo v višini 550 £ bo samodejno dodan na vaš račun ob uspešnem nakupu tega izdelka. Blokiranje in zavarovanje krije kupec. Kedpjxnliksfx Ah Djdu Opomba: Ti sklopi se nahajajo v Birminghamu, Združeno kraljestvo.