Hochrein & Hantschel GmbH

Stanje: dober (rabljeno), Koda: 0272 Znamka: STETON Model: TF 5 Delovni center za izdelavo vratnih in okenskih okvirjev Tehnični podatki: Prečna žaga: • Premer lista: 400 mm (F30) • Hitrost vrtenja lista: 3000 obr/min • Pnevmatsko vodeno horizontalno pomikanje lista • Moč motorja: 3 KM Čepilna vretena: • Dolžina: 490 mm • Moč motorja: 10 KM • Hitrost: 3000 obr/min • Premer vretena: 50 mm • Premer orodja: 350 mm • Vertikalni pomik vretena: 450 mm Voziček za čepilnik: Lajdpfjx Itqfox Ah Ajk • Hitrost: 5/22 m/min • Dimenzije: 350 x 685 mm • Min./maks. dolžina obdelovanca: 320/2600 mm • Min./maks. širina obdelovanca: 20/200 mm • Min./maks. debelina obdelovanca: 20/120 mm Profilirni del: • 1. profilirno preskakujoče vreteno (lomilec iveri) • Dolžina vretena: 325 mm • Premer vretena: 50 mm • Moč motorja: 5,5 KM • 4 delovne pozicije • Maksimalni premer orodja: 220 mm Glavno profilirno vreteno: • Dolžina: 490 mm • Moč motorja: 10 KM • Hitrost: 6000 obr/min • Vertikalni pomik vretena: 450 mm • Maksimalni premer orodja: 220 mm Enota za letev za zasteklitev: • Premer lista: 180 mm • Premer vretena: 30 mm • Hitrost: 6000 obr/min • Moč motorja: 3 KM Dodatni voziček Vreteno za utore za okovje • Moč motorja: 3 KM • Premer vretena: 40 mm • Premer orodja: 180 mm Premer priključka za odsesavanje: 120/80 mm Delovni tlak zraka: 6-7 bar Skupne dimenzije (Š x D x V): 2300 x 2800 x 1900 mm Teža: 2250 kg

Stanje: rabljeno, Slot spindle 2 pcs. Number of milling units: 7 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 12 with radial and axial NC spindles, VARIO table, and trimming carriage ..... Machine professionally dismantled and stored at our warehouse in 73447 Oberkochen. Video and photos were taken before dismantling. Technical data summary (additional accessories possibly included, please inquire) ..... Crosscut saw ..... > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.7 kW > Laser alignment light for identifying saw cuts > Axial adjustment range: 150 mm NC axis, electronically infinitely adjustable > Radial adjustment range: pneumatically controlled, 8 positions for e.g., edge rounding from above Rounding unit ..... > Position: horizontal bottom > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial adjustment mechanically linked with crosscut saw. > Radial adjustment: pneumatically operated on/off Electronic length stop ..... > Length: 4,500 mm 1st Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported Ledjx H Al Njpfx Ah Ajak 2nd Tenoning and slotting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial adjustment: 580 mm NC axis, infinitely adjustable > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter-support: the entire clamping length is counter-supported Transfer belt ..... For transferring parts to the longitudinal machining section, including part separation for doubles infeed to the longitudinal machining. 1st Profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm > Min. tool cutting circle: 140 mm > Max. tool cutting circle: 232 mm > 2 feed rollers opposite to spindle, axially pneumatically controlled, 8 positions > Table plate pneumatically controlled according to tool diameter 2nd Profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial adjustment: 350 mm NC axis, infinitely adjustable > Radial adjustment: 80 mm NC axis, infinitely adjustable > Spindle speed: 6,000 rpm ...

Stanje: rabljeno, Slotted spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 6975 Weinig Unicontrol 6, year 1995, with electronic length stop and swiveling belt .... Sale on behalf of customer. Pictures are from our archive and were taken before the machine was delivered to the customer. Technical data overview (Please inquire about any additional accessories that may be included) .... Crosscut saw .... > Crosscut saw, pneumatic, with turret stop: > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 350 mm > Motor power: 3 kW Ledox Dngwjpfx Ah Aoak > Laser guide light for recognition of saw cut section: Length stop .... > Electronic length stop 1st Tenoning and slotting spindle .... > Number of tools: 3/4 pcs. > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 > Spindle speed: 3,500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW 1st Profiling spindle - Co-rotating spindle (co- and counter-rotation) .... > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 7.5 kW 2nd Profiling spindle .... > Position: vertical right > Number of tools: 3/4 pcs. > Tool clamping length: 320 mm > Vertical spindle stroke pneumatic: 240 mm for timber thickness IV 68-92 > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. tool circle: 232 mm > Motor power: 11 kW 3rd Profiling spindle (hardware spindle) .... > Position: vertical right > Number of tools: 3 pcs. > Spindle speed: 6,000 rpm > Spindle diameter: 40 mm > Max. tool circle: 180 mm > Motor power: 3 kW 4. Grooving unit, horizontal-vertical, synchronized .... > Position: top horizontal > Number of tools: 1 pc. > Tool clamping length: 40 mm > Spindle diameter: 40 mm > Max. tool circle: 130 mm > Motor power: 3 kW Further features .... > Rebating device for splinter-free ...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, Stroj za izdelavo oken Proizvajalec: Okoma Tip: UF1 S Leto izdelave: 1988 z orodjem Lodpfox At Idjx Ah Asak

Stanje: rabljeno, Leto izdelave: 1992, Stroj je v rabljenem, vendar dobrem stanju. Lsdpfoxxn Tmex Ah Aoak Stroj deluje brezhibno. Agregat je treba natančno nastaviti. Za vprašanja ali zanimanje nas prosim kontaktirajte!

Stanje: rabljeno, Slitting spindle 1 pc. Number of milling units: 5 pcs. Spindle diameter: 50 mm Weinig Unicontrol 12 with radial and axial NC spindles, as well as VARIO table and profiling carriage ..... Machine available for inspection while still in operation! Optionally with used tools and window construction software for data transfer to the Unicontrol 12! Technical Data Summary (For additional accessories potentially included, please inquire) ..... Cross-cut saw ..... > Cross-cut saw electronically, horizontal stepless adjustment > Number of tools: 1 pc. > Spindle speed: 3,000 - 6,000 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW Laedpfx Aoxwdv Ijh Aek > Laser guide light for cut line recognition > Axial travel 150 mm, NC axis, electronically stepless > Radial travel pneumatic, 8 positions e.g. for top edge rounding Rounding unit ..... > Position: horizontal below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Tool clamping length: 25 mm > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm > Axial travel mechanically linked with the cross-cut saw. > Radial adjustment pneumatic, on/off control electronic length stop ..... > Length: 4,100 mm 1. Tenoning and slitting spindle ..... > Number of tools: variable > Motor power: 15 kW > Spindle diameter: 50 mm > Tool clamping length: 640 mm, with counter bearing > Axial travel: 580 mm NC axis, stepless > Spindle speed: 2,800 rpm > Max. tool diameter: 400 mm > Counter support, entire clamping length is supported Transfer belt ..... For transferring parts to the longitudinal processing, including double part separation before entry into longitudinal processing. 1st profiling spindle (climb and counter rotation) ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, NC axis, stepless > Radial travel 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool diameter: 140 mm > Max. tool diameter: 232 mm > 2 feed rollers opposite spindle, axially pneumatically controlled, 8 positions 2nd profiling milling unit (grooving unit from above) ..... > Position: horizontal above > Motor power: 3.7 kW > Spindle diameter: 40 mm > Tool clamping length: 40 mm > Axial travel: 30 mm, 8 positions > Radial travel: 125 mm, 8-position revolver > Spindle speed: 9,000 rpm > Max. tool diameter: 130 mm 3rd profiling spindle ..... > Position: vertical right > Number of tools: variable > Motor power: 11 kW > Spindle diameter: 50 mm > Tool clamping length: 400 mm, with counter bearing > Axial travel 350 mm, NC axis, stepless > Radial travel 80 mm, NC axis, stepless > Spindle speed: 6,000 rpm > Min. tool diameter: 140 mm > Max. tool diameter: ...

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 used Weinig Unicontrol 6 with GLS ----- For sale on behalf of customer Technical Data Overview ----- 1. Cross-cut saw ----- Cross-cut saw pneumatic, with 8-position revolver stop Spindle speed: 2,800 rpm Spindle diameter: 40 mm Max. tool diameter: 350 mm Motor power: 3 kW Laser alignment light for saw cut detection Manual length stop 4,100 mm 1. Tenoning and slotting spindle ----- Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 3,500 rpm Spindle diameter: 50 mm Max. tool diameter: 320 mm Motor power: 11 kW 1. Profiling spindle – same direction spindle (climb & counter-climb) ----- Position: vertical right Number of tools: 1 pc. Tool clamping length: 120 mm Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 7.5 kW 2. Profiling spindle ----- Position: vertical right Number of tools: 3 / 4 pcs Tool clamping length: 320 mm Vertical spindle stroke, pneumatic: 240 mm for timber thickness IV 68-92 Spindle speed: 6,000 rpm Spindle diameter: 50 mm Max. tool swing diameter: 232 mm Motor power: 11 kW 3. Profiling spindle (fitting spindle) ----- Position: vertical right Number of tools: 3 pcs Spindle speed: 6,000 rpm Spindle diameter: 40 mm Max. tool swing diameter: 180 mm Motor power: 3 kW Clamping length: 150 mm 4. Glazing bar saw, horizontally and vertically indexed ----- Position: horizontal, top Number of tools: 1 pc. Tool clamping length: 40 mm Spindle diameter: 40 mm Motor power: 3 kW Axial indexing: 2 positions Radial indexing: 2 positions Lsdpfxjxvtggo Ah Ajak Additional Features ----- Sash rebating unit for tear-free rebating Twin workpiece package Return conveyor for single-operator handling at working height: swivel tray Screen control: 99 programs Tilting window device Electronic angle display for tilted windows INCLUDES window tooling OPPOLD, year 2013: Oppold IV 68/78/92 timber Oppold IV 68/78 timber-aluminium Sale of tools as currently equipped, as is, with existing accessories. Note on window profiles, tool drawings, and tool system lists: Engelfried GmbH does not warrant that the actual tools correspond with the specified and illustrated systems. (Technical details as per manufacturer – no guarantee!)

Stanje: rabljeno, Grooving spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm # 2809 Weinig Unicontrol 6 Technical Data Summary (Please inquire for additionally included accessories) Item 1: Cross-cut saw ----- > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser alignment light for saw cut detection Length stop CNC-controlled ----- > Length: 3,500 mm > Electronic length stop including positioned cross-cut saw Item 2: Tenoning and grooving spindle ----- > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 3,000 rpm > Max. cutting circle: 320 mm > Spindle diameter: 50 mm > Max. tool diameter: 360 mm > Motor power: 11 kW Item 3: 1st profiling spindle (climb and counter-rotating) ----- > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: 3 (stroke 2 x 100 mm) or 4 (stroke 3 x 80 mm) > Tool clamping length: 320 mm > Spindle vertical stroke pneumatic: 240 mm for timber thicknesses 68 - 92 mm > Spindle speed: 6,000 rpm > Spindle diameter: 50 mm > Max. cutting circle: 232 mm > Motor power: 11 kW 2 axially indexed feed rollers opposite the profiling spindle, for the machining of narrow, short parts (e.g. glazing bar components) Glazing bar guide consisting of: Glazing bar support rail from above in the area of the vertical right profiling unit and profiling spindle. Lodpfxjxtvgks Ah Aoak Item 5: Horizontal top profiling unit ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. cutting circle: 130 mm > Axial adjustment: 30 mm, 2 positions > Radial adjustment: 125 mm, 4 positions, manual Item 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment: 115 mm, 8 positions via pneumatic turret > Radial adjustment: 110 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. cutting circle: 210 mm > Motor power: 3.0 kW Additional Features ----- > Electric feed height adjustment incl. mechanical digital display and manual feed beam clamping > Sash forming device for tear-free sashes > Double-piece package > Return conveyor for single-operator use: swing belt > Screen control > Angle sash window device > Electronic angle display for sash windows > Industrial PC with Windows PC control/NEXUS Extraction port diameters: ----- Cross-cut saw: 80 mm Grooving spindle: 140 mm Profiling spindle 1: 140 mm Profiling spindle 2: 140 mm Grooving device from...

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, dolžinski omejevalnik: 4.500 mm, premer orodja: 400 mm, največja hitrost vretena: 6.000 obr/min, model krmilnika: Weinig Unicontrol 12, TECHNICAL DETAILS Cross-cut saw (electronic, horizontal, stepless adjustment) Number of tools: 1 pc. Motor power: 3.7 kW Spindle speed: 3,000–6,000 rpm Spindle diameter: 40 mm Tool diameter: max. 400 mm Axial adjustment travel: 150 mm NC axis, electronically stepless Radial adjustment travel: pneumatic, 8 positions (e.g. edge rounding from above) Rounding unit Position: horizontal, bottom Axial adjustment travel: together with cross-cut saw Electronic length stop Length: 4,500 mm 1st & 2nd tenoning and mortising spindle Spindle diameter: 50 mm Spindle speed: 2,800–4,000 rpm Motor power: 15 kW Tool diameter: 380–400 mm Tool clamping length: 640 mm, with counter bearing Axial adjustment travel: 580 mm NC axis, stepless Trailing counter (entire clamping length is counter-supported) 1st & 2nd profiling spindle Position: vertical right Spindle diameter: 50 mm Spindle speed: 6,000 rpm Motor power: 11 kW Tool clamping length: 400 mm, with counter bearing Tool cutting circle: min. 140 mm Tool cutting circle: max. 232 mm Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Profiling milling unit (grooving unit from above) Spindle diameter: 40 mm Motor power: 3.0 kW Tool clamping length: 40 mm Axial adjustment travel: 30 mm NC axis, stepless Radial adjustment travel: 125 mm NC axis, stepless Spindle speed: 9,000 rpm Tool cutting circle max.: 130 mm 4th profiling spindle Position: vertical right Number of tools: variable Motor power: 11 kW Spindle diameter: 50 mm Tool clamping length: 400 mm, with counter bearing Axial adjustment travel: 350 mm NC axis, stepless Radial adjustment travel: 80 mm NC axis, stepless Spindle speed: 6,000 rpm Tool cutting circle min.: 140 mm Tool cutting circle max.: 232 mm 5th profiling milling unit (fitting spindle) Position: vertical right Motor power: 3.0 kW Spindle diameter: 40 mm Tool clamping length: 160 mm Axial adjustment travel: 115 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool cutting circle max.: 210 mm 6th profiling milling unit (grooving unit from above), in auxiliary stand Position: vertical, working from above on the right Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 40 mm Axial adjustment travel: 100 mm, 8 positions via pneumatic turret Radial adjustment travel: 80 mm, 8 positions via pneumatic turret Spindle speed: 5,850 rpm Tool cutting circle max.: 180 mm 7th profiling spindle (grooving unit from below) in auxiliary stand Position: horizontal bottom Motor power: 3 kW Spindle diameter: 40 mm Tool clamping length: 125 mm Axial adjustment travel: 100 mm NC axis, stepless Radial adjustment travel: 100 mm NC axis, stepless Spindle speed: 5,850 rpm Tool cutting circle max.: 200 mm MACHINE DETAILS Mortising spindle: 2 pcs. Number of milling units: 7 pcs. Control: Weinig PC-Nexus, Weinig Unicontrol 12 INCLUSIVE: used window tooling OERTLI IV 68, IV 78 for wood and wood-aluminum Further equipment details can be found in the attached document! Lodpfxexp U N Nj Ah Asak Note: The machine has already been professionally dismantled.

Stanje: rabljeno, Tenoning spindle 1 pc Number of milling units: 4 pcs Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 CNC – spindles CNC controlled radially and axially ---- The machine was factory-refurbished by Weinig in 2024. As part of this, the control system was replaced with a Siemens S7 677 C, including a new “Touch” membrane panel. With the following machining units: Crosscut saw Lasdpfx Asxpi Dueh Aek ---- with laser guide light, motor power 3 kW, spindle diameter 40 mm, spindle speed 3,000 rpm axial adjustment via NC axis radial adjustment pneumatic, 8 positions for top edge rounding Bottom-mounted unit for edge rounding ---- axial adjustment shared with crosscut saw Haunching and tenoning spindle ---- motor power 15 kW spindle diameter 50 mm spindle speed 2,925 rpm min. tool cutting circle 380 mm, max. 400 mm tool clamping length 640 mm axial adjustment via CNC axis axial traverse path 580 mm adjustment speed 100 mm/sec. 1st profile spindle (climb and conventional milling) ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis 2nd profile spindle ---- motor power 11 kW spindle diameter 50 mm spindle speed 6,000 rpm tool clamping length 400 mm with counter bearing axial and radial adjustment via CNC axis Horizontal profile milling unit, top ---- motor power 3 kW spindle diameter 40 mm spindle speed 9,000 rpm pneumatic adjustment in 8 axial and radial positions Vertical profile milling unit, right, at machine outfeed ---- motor power 3 kW spindle diameter 40 mm spindle speed 5,850 rpm pneumatic adjustment in 8 axial and radial positions Additional accessories ---- CNC-controlled length stop, mounted on the tenoning table for lengths up to 3,500 mm, including crosscut saw integrated into the control system. Studio window facility, swivelling ±60° Double workpiece package with automatic separation and transfer Climb milling facility with window automation for rabbetting Rabbetting carriage for small sash widths Climate control unit in electrical cabinet PC control NEXUS Automatic turning system Lamella conveyor including return belt for return of workpieces to the operator (specifications as per manufacturer's information – subject to confirmation).

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, GUBISCH Centromat CW3 Rabljeni stroj za izdelavo oken in vrat s 50 mm Ø vreteni za vzdolžno profiliranje Naslednji deli so bili že zamenjani: Energetska veriga in električni kabli za utorni mizo Zvočnoizolacijske podloge v pokrovih Pnevmatske cevi Ležaj za kontra kolut Spajanje na vzdolžnem področju Rotacijski dajnik za drugo utorno vreteno Ležaj za utorno mizo Računalnik je bil očiščen in pregledan Različni pnevmatski cilindri Ljdpexgqlujfx Ah Aoak Klinasti jermen

Stanje: rabljeno, Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, OKOMA kotna naprava z novo Siemensovo krmilno enoto. Za utore, vzdolžno obdelavo, izrezovanje in preoblikovanje steklenih letvic. Vsa vretena s pnevmatskim gibom ter pneumatskim vklopom/izklopom. Vretena premera 40 mm. - Nastavljiva žagalna enota - 1 utorno vreteno - 1 vzdolžno vreteno vključuje isto- in protismerno obdelavo - 3 vzdolžna vretena - Žaga za steklene letve od zgoraj - Motorni brezstopenjski podajalnik - Valjčna proga za povratni transport lesenih kosov - Frezalni prislon za vzdolžno področje - Avtomatska utorna miza s pnevmatskim vpenjanjem in motornim podajanjem, z možnostjo nagiba - Stroj vklj. z Golg orodjem Lajdpsxdfdmsfx Ah Ask

Stanje: rabljeno, Slot spindle 1 pc. Number of milling aggregates 0 pcs. Spindle diameter 40 mm Small window manufacturing line consisting of: ----- 1) Haberkorn FZS1 slotting machine 2) Okoma SF3F table milling machine 3) Oertli tooling for the Haberkorn and Okoma machines Wooden windows: 1 set IV 68/78/88 and 1 set wood-aluminium windows IV 68/78, year 2011 4) Götzinger OBM Plus corner bearing and olive drilling machine, Maco MultiMatic fittings ----- Technical Manufacturer Specifications: - Haberkorn FZS1 slotting machine with automatic feed, - Continuous height adjustment D 40 mm Cut-off saw: - Spindle arrangement: top - Three-phase motor: 3 kW - Spindle diameter: 30 mm - Speed: 2,800 rpm - Saw blade diameter: 400 mm - Automatic brake with speed monitoring - Horizontal positioning pneumatic, manual adjustment - Guard and extraction hood with extraction nozzle diameter: 100 mm Slot spindle D 40 mm: - Power: 7.5 kW - Speed: 4,200 rpm - Usable length: 252 mm - Max. tool diameter: 340 mm - 220 mm stroke, continuously adjustable height by precision ball screw - Guard and extraction hood with extraction nozzle diameter: 180 mm - Automatic brake with speed monitoring Studio table: - Swivel range +/- 65 degrees - Automatically changing counterblock (programmable) - Pneumatic clamp - High-precision electronic angle display - Automatic length compensation - Counterblock in cutting plane for every angle setting Special equipment: - Laser for workpiece positioning - Saw position pneumatic - Length stop LA 2500 mm + 1850 mm extension ----- 2) Okoma SF3F table milling machine with lifting spindle, 3 tools - Extraction connection nozzle 2 x 120 mm - Spindle length 270 mm - Opposing fence with fine adjustment and turret head - Triple lift, max. stroke height 90 mm - Glazing bead separation saw with guard and extraction hood, 80 mm diameter - 8-roller feed device with stand and hold-down arm, required when fitted for glazing bead separation saw - Pneumatic corner notcher for edge drive, speed 6,000 rpm - 2 x 3 kW motor - Tool holder diameter 30 mm ----- 3) Oertli tooling for Haberkorn and Okoma machines - 1 set wooden windows IV 68/78/88 - 1 set wood-aluminium windows IV 68/78 Tools are sold as they are, in condition, scope, and with accessories as existing in our stock. Note on window cuts, tool drawings, listing of tool systems: Engelfried GmbH does not guarantee that the existing tools correspond to the systems named and depicted. ----- 4) Götzinger OBM Plus corner bearing and olive drilling machine - Corner and scissor bearing + handle olive drilling - Vertical drilling unit with: - Quick-change drill head - Pneumatic feed via foot pedal - 1x olive drill head 24 mm - 1x corner bearing double head - Maco MultiMatic fittings - 1x adjustable flip stop left with 6 stops Lasdpfxexa Hi Nj Ah Aok - 1x adjustable flip stop right with 6 stops - 1x complete machine stand with shelf - 220/400 V, 60 Hz, 1.3 kW - 1x roller conveyor approx. 1 m long with 2 rollers - 1x roller conveyor approx. 1.5 m long with 3 rollers ----- Price of the above-mentioned machines on request! Plus packaging and shipping ----- (technical data according to manufacturer - no...

Stanje: rabljeno, Leto izdelave: 1998, Slotting spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm 1 GUBISCH – CENTROMAT CW 2 For sale on behalf of customer, ex-warehouse ----- Manufacturer's description: ----- For production of windows and doors, with 50 mm spindle diameter for longitudinal profiling. Equipped with the following processing stations and capabilities: - Single-sided slotting unit for straight and angled joints; milling unit for longitudinal profiling - Rebating operation with climb milling unit and automatic plunge mechanism - Swiveling frame support up to 650 mm - Central control panel 1.0 Automatic crosscut saw with top-entry plunge action ----- Ljdpfx Ahjw I Eawe Asak Motor power incl. motor brake: 3.0 kW Spindle speed: 2,800 rpm Tool diameter: 350 mm Spindle diameter: 30 mm Clamping flange, 1 driver 6 mm, TK 42, 120 mm diameter Vertical pneumatic stroke: 100 mm Horizontal pneumatic stroke: 160 mm Against 2 manually adjustable 6-position turret stops Chip extraction hood with 100 mm diameter extraction nozzle 2.0 Slotting unit ----- Motor power incl. motor brake: 9.2 kW Spindle speed: 3,800 rpm Tool diameter: 320 mm Spindle diameter: 50 mm Usable spindle length: 320 mm Vertical pneumatic fixed stroke: 2 x 100 mm Suitable for 3 tool sets of 100 mm each Zero height: 10 mm Chip extraction hood with 160 mm extraction nozzle 3.0 Slotting table ----- Table height above floor: 920 mm Feed with 4 continuously adjustable speeds: - 1. Milling, angled window, and tip speed adjustable at control panel (approx. 7 m/min) - 2. Sawing speed: approx. 7 m/min (set on machine) - 3. Transfer speed: approx. 10 m/min (set on machine) - 4. Return speed/no machining: approx. 25 m/min (set on machine) - Motor power including brake: 0.37 kW Workpiece clamping: pneumatic, pendulum pressure shoes Workpiece clamping: pneumatic 1 clamping cylinder with 2 additional pressure shoes 3.1 Counter rail device: Counter rail changer with 2-way automatic changeover and, after manual 180° rotation, 2 further counter profiles possible, which can also be processed automatically 3.2 Length stop ----- - Stop system with 3 scales for a) Outer frame outside b) Sash outside vertically c) Sash outside horizontally - Manual adjustment - Length with attachable extension 3000 mm - Swivelable for angled windows +/- 60 degrees 3.3 Angle transfer - automatic via vertically indexed feed roller in milling feed 4.0 Milling unit for longitudinal profiling and rebating of windows/doors equipped with the following units: ----- 4.1 First profile milling unit ----- - Conventional (opposing) milling - Climb milling with automatic plunge for rebating - Motor power incl. brake: 9.2 kW - Spindle speed: 6,000 rpm - Tool diameter: max. 240 mm - Spindles adjustable for zero diameter: max. 140 mm min. 112 mm (tools) - Zero height: 10 mm - Spindle diameter: 50 mm - Usable spindle length: 320 mm - Vertical pneumatic stroke (fixed) - Suitable for up to 4 sets of tools (each 80 mm, or 3 x 80 mm) - Horizontal pneumatic stroke: 80 mm - Chip extraction with extraction ...

Stanje: rabljeno, Leto izdelave: 2007, Slotting spindle 3 pcs. Number of milling units: 5 pcs. Spindle diameter: 50 mm Control: Control 100 PC SCM Windor 100 CNC ----- Powerful and versatile CNC production line for windows and doors Processing of workpieces up to max. 4500 mm length, 250 mm width, and 150 mm thickness Comprising Windor 60, version B Infeed conveyor Slotting section: ----- Pos. 1: Cross-cut saw ----- - Motor: 4 kW - 3000 rpm - Spindle diameter: 40 mm - Max. tool diameter: 400 mm, bore 80 mm Pos. 2: 1st slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Stepless vertical positioning - Interpolating rotation, automatic inclined window adjustment +/- 60 degrees Pos. 3: Electrospindle with HSK 63 F tool holder ----- Lsdpfjw Im Iiox Ah Ajak - Min./max. rotation speed: 1000-12000 rpm - Max. motor power: 11 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 4: 2nd slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Stepless vertical positioning - Interpolating rotation, automatic inclined window adjustment +/- 60 degrees Pos. 5: 3rd slotting spindle ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 3500 rpm - Max. tool diameter: 370 mm - Counter unit "Jolly" - Stepless vertical positioning Fleximat ----- Including left and right stops with horizontal CNC positioning for the following through-feed operations: Lock case mortising and 9-degree Anuba drilling from the right. Dowel holes and strike plate markings from left and right, 7 spindles each. Cup hinge drilling and olive drilling from above. Profiling section ----- Pos. 5: Power 2000 F4: Electrospindle with HSK 63 F tool holder ----- - Working from the left - Min./max. rotation speed: 1000-18000 rpm - Max. motor power: 12 kW - Water cooling - Rapid 24 automatic tool changer with 24 positions Pos. 6: 1st profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm - Stepless vertical positioning - Stepless horizontal positioning Pos. 7: 2nd profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm - Stepless vertical positioning - Stepless horizontal positioning Pos. 7: 3rd profiling spindle from the right ----- - High-performance spindle with top bearing, spindle length 620 mm - Spindle diameter: 50 mm - Motor: 11 kW - 6000 rpm - Tool diameter min./max.: 130-250 mm ...

Stanje: zelo dobro (rabljeno), CNC window machining center. Laodpfxswmxkhj Ah Ajk

Stanje: zelo dobro (rabljeno), SCM Multiflex angular processing centre for single-sided cross and longitudinal machining of window and door corners Ljdewmcnwepfx Ah Aoak Tenoning spindle, length 320 mm, max. working range 320 mm Roller feed system Profiling spindle, length 320 mm, max. working range

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, WEINIG, Type UNICONTROL 10/3, Machine No. 032-1136, Year of manufacture 1993 Technical specifications: Crosscut saw with 4-position rotary indexing, laser guide light Vertical stroke: 125 mm Speed: 2800 rpm Spindle diameter: 40 mm Tool diameter: 350 mm Lajdpfswk U Rlsx Ah Ajk Clamping length: 40 mm Horizontal stroke: 160 mm Motor: 4 kW Extraction port: 80 mm diameter UNITEC slotting spindle 50 x 300 mm 3 tools Vertical stroke: 2 x 100 mm Speed: 3500 rpm Spindle diameter: 50 mm Tool diameter: 300–320 mm Clamping length: 300 mm Motor: 11 kW Extraction port: 140 mm diameter UNIVAR milling spindle 50 x 285 mm (climb/counter-rotation spindle) 3 tools Vertical stroke: 2 x 95 mm Speed: 6000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port: 140 mm diameter UNIVAR milling spindle 50 x 285 mm 3 tools Vertical stroke: 2 x 95 mm Speed: 6000 rpm Spindle diameter: 50 mm Tool diameter: 232 mm Clamping length: 285 mm Horizontal stroke: 80 mm Motor: 11 kW Extraction port: 140 mm diameter Configuration: Minimum working width: 30 mm / Minimum working height: 30 mm Maximum working height (with stroke): 100 mm / Maximum working height (without stroke): 120 mm Feed: 1.1 kW / infinitely variable 6–12 m/min Tool set: LEITZ Dufix IV-68 EURO window Digital display for studio window Mechanical length stop Screen control Twin-part package Return roller conveyor Machine is in good technical and visual condition and fully functional NET PRICE: EUR 7,400 (plus VAT) Delivery: EXW Lead time: Short notice by arrangement Inspection: By arrangement Subject to prior sale and errors.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Weinig Unicontrol 10 Year of manufacture: 1996 Technical condition: very good Description: The Weinig Unicontrol 10 is an automatic CNC machine designed for planing and profiling wooden components, particularly used in the production of window and door joinery. It combines four-sided planing with precise profiling capabilities. Lodpfewbikbex Ah Aeak Main features: ✅ Automatic adjustment of spindles and guides via CNC system ✅ Very high machining accuracy – ideal for series production ✅ Quick machine changeover thanks to profile settings memory ✅ Robust and durable frame construction ✅ Capability to work with various types of wood – both soft and hard Included: Weinig Univar 6, year of manufacture: 1996, also in very good condition.

Stanje: rabljeno, Corner Processing Line Weinig Unicontrol 10 (UC 10) for the production of windows, components, and doors. Suitable for frame-based, series, or single-piece production, featuring 2 tenoning and slotting spindles including Oertli tool set. - Units: Laedjv Ag Tdepfx Ah Aek 1. Crosscut saw, NC axis, 3 kW, ø 40 mm, 2,800 rpm 2. First tenoning and slotting spindle, NC axis, ø 50 mm, 15 kW, clamping length: 640 mm (8 x 80 mm) 3. Second tenoning and slotting spindle, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 4. Profiling spindle 1, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 5. Profile milling unit, horizontal from above, 3 kW 6. Profiling spindle 2, NC axis, ø 50 mm, 11 kW, clamping length: 4 x 80 mm 7. Profiling spindle 3, NC axis, ø 50 mm, 11 kW, clamping length: 400 mm 8. Profile milling unit, vertical right, 3 kW 9. Profile milling unit, vertical right from above, 3 kW 10. Profile milling unit, horizontal from below, NC axis, 3 kW - Double workpiece package - Profiling rework package with rework carriage - Automatic flipping system - NEXUS PC control - CNC-controlled length stop - Studio window setup - Unit for edge rounding from below with crosscut saw - Georgian bar support rail - Incl. extraction pipe system - Incl. Oertli tool set - Additional technical data and tool drawings available on request.

Stanje: rabljeno, Leto izdelave: 2000, Lokacija skladišča: Nattheim Laedpsvwdmwefx Ah Aok

Stanje: rabljeno, Leto izdelave: 1985, Teža: cca 3000 kg Dimenzije: cca 3700 x 2000 x 1600 mm Lokacija skladišča: Nattheim Laedpevvi Ttjfx Ah Aok

Stanje: rabljeno, Keyway Spindle 1 pc. Number of Milling Units: 5 pcs. Spindle Diameter: 50 mm Control System: Weinig, PC-Nexus #2774 Weinig Unicontrol 6 with NC Spindles Machine is cleaned and fully inspected prior to delivery Technical Data Summary (Please enquire about any additional included accessories) Pos. 1: Cross-Cut Saw ----- > Number of Tools: 1 pc. > Spindle Speed: 2,800 rpm > Spindle Diameter: 40 mm Ljdpjvu Hghefx Ah Asak > Max. Tool Diameter: 400 mm > Motor Power: 3 kW > Radial Adjustment pneumatically controlled across 8 positions, e.g., for top edge rounding > Laser Guidance for cutting section detection Pos. 2: Rounding Unit, Horizontal Lower ----- > Position: horizontal, lower > Motor Power: 1.5 kW > Spindle Diameter: 20 mm > Clamping Length: 25 mm > Spindle Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment mechanically linked with cross-cut saw > Radial Adjustment pneumatically controlled, on/off NC-Controlled Length Stop ----- > Length: 3,500 mm > Electronic length stop Pos. 3: Tenoning and Keyway Spindle ----- > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 3,500 rpm > Max. Cutting Circle: 320 mm > Spindle Diameter: 50 mm > Max. Tool Diameter: 320 mm > Motor Power: 11 kW Pos. 4: 1st Profiling Spindle (Climb and Conventional Milling) ----- > Position: vertical, right > Number of Tools: 1 pc. > Tool Clamping Length: 120 mm > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 7.5 kW Pos. 5: 2nd Profiling Spindle ----- > Position: vertical, right > Number of Tools: variable, stepless adjustment, NC controlled > Tool Clamping Length: 320 mm > Vertical Spindle Stroke: variable, 254 mm, stepless, NC controlled > Spindle Speed: 6,000 rpm > Spindle Diameter: 50 mm > Max. Cutting Circle: 232 mm > Motor Power: 11 kW 2 Feed Rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash Bar Guide consisting of: Guide rail at the stop (climb milling section), Sash bar support rail from above in the area of the vertical right profile milling unit and profiling spindle. Pos. 6: Profiling Milling Unit, Horizontal Upper ----- > Clamping Length: 40 mm > Spindle Diameter: 40 mm > Motor Power: 3.0 kW > Speed: 9,000 rpm > Max. Cutting Circle: 130 mm > Axial Adjustment: 30 mm, 8 positions > Radial Adjustment: 125 mm, 8 positions Pos. 7: 3rd Profiling Spindle (Fitting Spindle) ----- > Position: vertical, right > Tool Clamping Length: 160 mm > Axial Adjustment: 115 mm, 8 positions > Radial Adjustment: 110 mm, 8-position turret > Spindle Speed: 5,850 rpm > Spindle Diameter: 40 mm > Max. Cutting Circle: 210 mm > Motor Power: 3.0 kW Pos. 8: Profile Milling/Grooving Unit, Bottom ----- > Motor Power: 3.0 kW > Tool Clamping Length: 125 mm > ...

Stanje: rabljeno, Slot spindle 1 pc. Number of milling units: 4 pcs. Spindle diameter: 50 mm Control: Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and thoroughly inspected before delivery Technical Data Summary (For any additionally included accessories, please inquire) Pos. 1: Cross-cut saw ----- > Cross-cut saw, electronic, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Maximum tool diameter: 400 mm > Motor power: 3.0 kW > Laser line for identifying the saw cut > NC length stop, mounted on slotted table included Positioning of the cross-cut saw integrated into control system. > Length: 3500 mm Pos. 2: Tenon and slot spindle ----- > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Maximum tool diameter: 320 mm > Motor power: 11 kW Pos. 3: 1st profiling spindle (climb-cut and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 7.5 kW Pos. 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely adjustable NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely adjustable 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool swing: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Sash guide consisting of: Guide rail in the stop (area of climb-cut spindle), Sash support bar from above in the area of vertical right profile milling unit and profiling spindle. Ljdpfxovu Hfqo Ah Aeak Pos. 5: Profile milling unit horizontal, top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed: 5,850 rpm > Max. tool swing: 130 mm > Axial adjustment 30 mm, 8 positions via pneumatic turret > Radial adjustment 125 mm, 8 positions via pneumatic turret Pos. 6: 3rd profiling spindle (hardware spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment 115 mm, 8 positions via pneumatic turret > Radial adjustment 100 mm, 8 positions via pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool swing: 210 mm > Motor power: 3.0 kW Additional features ----- > Network-capable > Rebate unit for tear-free rebating > Double-part package > Return conveyor for one-man operation: pivoting belt > Screen control > Tilt window device > Electronic angle display for tilt windows > Industrial PC, PC control/NEXUS > Weinig type production program > Without machining tools No original pictures available yet. Photos show an identical machine from our archive. ----- Price for the above machine on request! ----- Optional at extra cost: EUR 6,500.00 Note...

Stanje: dober (rabljeno), working width 230 mm working height 120 mm spindle diameter 40 mm 4 heads + glazing bead cutting unit control via ATS panel Lasdovtt Ayspfx Ah Aek two-axis head adjustment electric adjustment of the pressure beam variable feed speed adjustment The machine operated in-line with other machines.