Eterix Sweden AB

Leto izdelave: 1998, Stanje: pripravljen za uporabo (rabljen), Na voljo je varilna naprava z robotom KUKA in vrtljivim pripomočkom. Nosilnost: 15 kg, ponovljivost: ±0,1 mm, doseg: 1570 mm, osi: 6, teža: cca 225 kg. Ogled na lokaciji je mogoč. Lodpfx Aoxp Rbnsh Dsah

Leto izdelave: 2017, Stanje: pripravljen za uporabo (rabljen), Rezalni glavi: 2, tip rezalne glave: AWJ 2D, dovod peska: sistem SM4000, tip črpalke: KMT Streamline SL-VI Standard, maks. tlak črpalke: 3800 barov. Dimenzije mize X/Y: 3200 mm/1710 mm, dimenzije rezanja X/Y: 3010 mm/1510 mm, pomik X/Y/Z: 3010 mm/1510 mm/250 mm, hitrost pomika: 12 m/min, razdalja med rezalnima glavama: 90 mm–450 mm, natančnost pozicioniranja: +/-0,075 mm, ponovljivost: +/-0,035 mm, krmiljenje: Fanuc 0i-MF, delovne ure: 4866 h. Vključuje oljni hladilnik, pripravo vode in varnostno območje. Dokumentacija je na voljo. Ogled na lokaciji je možen. Lajdpfx Ajxp Rcfjh Doh

Stanje: skoraj kot novo (rabljeno), Scanlab PowerScanII 50i Aperture: 50 mm Angle Encoder: Galvanometer scanner with analog position detector Lasdpfx Ajxp Iybeh Djh Optics Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Number of Installed Tunings: 1 Typical Tuning: Fast Vector Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% full scale): 1% full scale: 1.0 ms 10% full scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Position Resolution (max.): 18 bit for XY, 16 bit for Z* Non-linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electronics / Control Control: Galvanometer scanner with digital controller card Control Interface (alternatives): Digital SL2-100 Advanced Diagnostic Features: Yes (iDRIVE) Supply Voltage: (48±2) V DC, up to 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Housing Versions: Scan head Connector Positions: Opposite beam exit Weight (without lens, standard housing): 35 kg Dimensions (L x W x H, standard housing): (433 x 268 x 266) mm (with varioSCAN) Beam Offset: 72.72 mm Other Features Water cooling: Yes Air cooling: Yes Other Specifications Operating Temperature: 25 °C ± 10 °C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (See image) (Specifications subject to change and errors excepted!) Shipping & Collection: Secure pallet shipping (by arrangement) or local pickup possible. We are happy to answer further questions by phone.

Stanje: skoraj kot novo (rabljeno), Scanlab PowerScanII 50i Aperture: 50 mm Encoder: Galvanometer scanner with analog position detector Optics Wavelength Ranges (Standard): 9400 nm, 10600 nm Max. Laser Power: 2500 W at 9400 nm, 10600 nm Typical Deflection Angle: ±0.35 rad (optical) Dynamics Installed Tunings: 1 Typical Tuning: Fast-Vector-Tuning Tracking Delay: < 0.45 ms Positioning Speed (f = 160 mm): 20 rad/s Step Response (100% Full Scale): 1% Full Scale: 1.0 ms 10% Full Scale: 4.5 ms Accuracy Repeatability (RMS): < 4 µrad Max. Positioning Resolution*: 18 Bit for XY, 16 Bit for Z* Non-Linearity: < 2.1 mrad / 44° 8-Hour Drift (after 30 min.): Offset: < 50 µrad Gain: < 50 ppm Electrical / Control Control: Galvanometer scanner, digital control card Interface Options: Digital SL2-100 Advanced Diagnostic Options: Yes (iDRIVE) Supply Voltage: (48±2) V DC, max. 10 A each (20 A peak current) Mechanics Scan Axes: 3-axis system with integrated varioSCAN Enclosure Versions: Scan head Connector Positions: Opposite to beam exit Weight without Lens (Standard Housing): 35 kg Dimensions (L x W x H, Standard Housing): (433 x 268 x 266) mm³ (with varioSCAN) Beam Offset: 72.72 mm Additional Equipment Ljdpfx Aoxp Iw Hsh Doah Water Cooling: Yes Air Cooling: Yes Other Specifications Operating Temperature: 25°C ± 10°C Deflection Angle Deviation: < 5 mrad Zero Position Deviation: < 5 mrad Condition: used Scope of delivery: (see picture) (Subject to changes and errors in technical data. Specifications may vary!) Shipping & Pickup: Secure pallet shipping (by arrangement) or local pickup possible. We are happy to answer further questions by phone.

Leto izdelave: 2005, Stanje: pripravljen za uporabo (rabljen), Na voljo je varilni sistem Cloos z dvema obračalnima mizama in odsesovalno napravo. El. moč: 35kVA, nagibni moment: 1500Nm, vrtljivi moment: 800Nm, maks. obremenitev: 500kg, maks. razdalja težišča: 500mm, krmiljenje: Rotrol II, teža: ca. 600kg. Vključen je tudi manjši rezalni gorilnik Cloos ESAB. Dokumentacija je na voljo. Možen ogled na lokaciji. Ljdpfxexpw Tws Ah Djah

Stanje: rabljeno, Varilni rotator SARAZIN tip HD 100 - št. 2 Največja nosilnost: 5000 KG Premer mize: Ø 1500 mm Premer mize z zunanjimi podaljški: Ø 2100 mm Nagib: od 0 do 135° Nova elektro omarica z regulatorjem hitrosti Napetost: 380 V Dolžina: 2600 mm Širina: 2200 mm Višina v vodoravnem položaju: 1700 mm Laodpjxpuqaofx Ah Deh Teža: cca 4 T

Stanje: rabljeno, Varilni rotator SARAZIN tip HD 100 Maksimalna nosilnost: 5000 kg Premer mize: Ø 1500 mm Premer mize z zunanjimi podaljški: Ø 2100 mm Nagibanje: od 0 do 135° Nova elektro omara s frekvenčnim regulatorjem Napetost: 380 V Dolžina: 2600 mm Širina: 2200 mm Višina v vodoravnem položaju: 1700 mm Teža: pribl. 4 t Ljdpjxpui Nefx Ah Djah

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 10.000 kg, skupna masa: 4.600 kg, Velikost mize: 1500 x 1500 mm. Največja teža obdelovanca: 10.000 kg. Država izvora: Švedska. Teža: 4600 kg. Z variabilno hitrostjo vrtenja. Lasdpoxphdysfx Ah Djh

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Na voljo je popolna varilna linija z robotom in perifernimi napravami. Varilni mesti: 2, pomik robota: 11.000 mm, največji premer obdelovanca levo/desno: 2.200 mm, največja dolžina obdelovanca levo: 4.000 mm, dolžinski razpon obdelovancev desno: 1.000 mm–5.000 mm, varilni postopek: TIG, materiali: aluminij/nerjaveče jeklo, zaščitni plin: argon, skupne dimenzije postroja X/Y/Z: pribl. 15.350 mm/5.700 mm/4.000 mm, krmiljenje: Qirox QC2 Advanced. Vključuje izpušno tehnologijo. Dokumentacija je na voljo. Možen je ogled na lokaciji. Ljdpfx Ahjxnz Upj Deah

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Na voljo je naprava za vzdolžno zvarjanje Schnelldorfer. Postopek varjenja: WIG/TIG, vrste pločevin: konstrukcijsko jeklo/nerjavno jeklo/aluminij, obseg debelin pločevine: 0,5–10 mm, največja hitrost varjenja: 7 m/min, dolžina zvara: 2100 mm, minimalni notranji premer cevi: 165 mm, največji zunanji premer cevi: 800 mm, dimenzije tirnic X/Y: 40 mm/15 mm. Dimenzije stroja X/Y/Z: pribl. 4400/1850/3300 mm, teža: pribl. 4300 kg, krmiljenje: Siemens S7. Dokumentacija je na voljo. Ogled na lokaciji je možen. Laodpfx Aexl Uphoh Dsh

Leto izdelave: 2010, Stanje: pripravljen za uporabo (rabljen), Moč laserja: 4000W (4kW), valovna dolžina: 1030nm, kakovost žarka (BPP): 8mm/mrad, nastavitev premera žarka: 0,1µm, dimenzije stroja X/Y/Z: pribl. 1000mm/1600mm/1600mm, teža: pribl. 1000kg. Dokumentacija je na voljo. Ogled na lokaciji je možen. Lodpjxltuisfx Ah Dsah

Stanje: pripravljen za uporabo (rabljen), A total of 18 welding units are available. 1-9) Welding machine ESS MIG-MAG 311, operational: 3, defective: 2, status unclear: 4. Includes wire feeder DVK-13 and, in some units, hose package. 10) Welding machine Migatronic MTE 320. Includes wire feeder CTU 3000. The hose package is defective. 11) Welding machine Merkle W420 AC/DC TIG Insquare, welding process: TIG, material: aluminum. 12) Welding machine EWM MIG 450 puls. Includes wire feeder. 13) Welding machine WIG L-TEC TIG 404 AC/DC. 14) Welding machine Cloos GLC 450 N. Includes wire feeder and hose package. 15) Welding machine Oerlikon CPGL 454. Includes wire feeder VCW 454 and hose package. 16) Welding machine Stel HI-MIG 500P. Includes hose package. 17) Plasma cutting machine Plasma 125. Includes hose package. 18) Welding machine Merkle MIG/MAG M 325 DW. Includes wire feeder DV30. Documentation available. Inspection on site is possible. Lasdpsxhntxofx Ah Djh

Leto izdelave: 2002, Stanje: pripravljen za uporabo (rabljen), Na voljo je varilna vrtljiva miza Deuzer Maschinen & Automationstechnik. Območje težišča obremenitve: 200mm-1400mm, največji navor vpenjalne plošče: 10000Nm, največja nosilnost: 10000kg, največja nosilnost pri najvišjem težišču (1400mm): 2000kg. Ogled na lokaciji je mogoč. Lsdpfx Ajxfbcueh Dsah

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), The following units are available: one Rehm Invertig Pro 350 AC/DC and one Rehm Invertig Pro 450 DC, both used and in good condition. 1) Invertig Pro 350 AC/DC Lsdpfxsxddamo Ah Deah Standards: IEC 60 974-1, IEC 60 974-2 Welding current range (TIG): 3–350A Output voltage U₂ (at maximum current): approx. 24V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% (for TIG at 350A) Mains voltage/input: 3-phase, 400V, 50Hz Protection class: IP 23S, safety class S Adjustment range: 3–350A (TIG) for AC/DC version Duty cycle: 100% at 40°C, 350A (TIG), 100% DC Input fuse: 32A at 3x400V for the 350 AC/DC version Dimensions: length 520mm, width 360mm, height 460mm Weight: 29.5kg (AC/DC version) 2) Invertig Pro 450 DC Standard: IEC 60 974-1 Welding current range (TIG): 3–450A Output voltage U₂ at maximum current: approx. 28V Open circuit voltage U₀: approx. 91V Duty cycle (DC): 100% at 450A (TIG); for electrode welding, duty cycle is lower (approx. 60%) Mains/input: 3x400V, 50Hz Protection class: IP 23S Duty cycle at 100% DC, 450A (TIG) at 40°C Electrode welding current: approx. 360A at 100% DC (electrode) for the 450 DC version Power/input fuse: 32A at 400V (three-phase) for the 450 versions Dimensions: length 520mm, width 360mm, height 460mm Weight: approx. 28kg On-site inspection is possible.

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), There are 5 identical welding machines available. Mains voltage: 400V (50/60Hz), fuse: 25A, power consumption: 22kVA, cos phi: 0.8, adjustment range: 40-400A, working voltage: 16-34V, open-circuit voltage: 19-55V, voltage steps: 2x12, duty cycle (40°C): 60% 360A/32V, 100% 250A/26.5V, protection class: IP 23, insulation class: H (180°C), cooling type: F. Weight: gas-cooled 153kg, water-cooled 161kg. Dimensions (LxWxH): 1040mm x 460mm x 935mm. Two coarse levels, 12 fine levels, high-performance 4-roll wire feed, 140W, feed speed: 0.5-24m/min, wire diameter: 0.8-1.6mm, 2 inductance outlets for adaptation to the welding task, MC 15 control unit as a compact, easily replaceable control box. Features: wire feed speed (constantly regulated), wire creep start, burn-back time, 2/4-stroke operation, wire threading (without current and gas), low-noise fan (thermostat controlled for gas-cooled units), thermal overload protection, central connection socket for welding torch. On-site inspection is possible. Ljdpfx Ajxdda Hoh Dsah

Leto izdelave: 2018, Stanje: pripravljen za uporabo (rabljen), Na voljo so 3 enaka varilna aparata. Zelo malo rabljeni, standard: EN 60974-1, trifazni tok: 3~400V, 50Hz, nazivne vrednosti pri X(40°C): 5A/10V, 350A/24V (40%), 320A/22,8V (60%), 280A/21,2V (100%) za en način delovanja; še eno območje delovanja 5A/20V, z 320A/32,8V (40%), 290A/31,6V (60%) in 260A/30,4V (100%), U1=400V, zaščita IP23. Gre za inverter-reguliran TIG/MMA izvor varilnega toka z max. 350A, digitalnim upravljanjem in pomnilniškimi funkcijami, nastavljivo pulzno funkcijo od cca 0,5Hz do 2kHz, HF- ali Lift-vžig, nastavljivi parametri kot so predtekanje in dotekanje plina, Slope up/down, Balance in različne oblike valovanja (sinus, pravokotna ipd.), PFC-tehnologija za visoko učinkovitost in delo z agregati, priklop daljinskega ali nožnega stikala, termični nadzor in diagnostika napak s kodami napak, možnost priklopa enote za vodno hlajenje (KG 10). Ogled na lokaciji je možen. Lasdpfx Ahsxdda Ts Djh

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), A like-new plasma cutter is available. Operating hours: 30h. Open-circuit voltage (U₀): approx. 292V. Output current (I): 105A at 30A/92V - 105A/122V (at 92 or 122V under 30A). Output voltage under load (nominal) HYP U₂/IEC U₂: approx. 160V (at 100% power)/ approx. 142-160V depending on standard. Duty cycle at 30°C: at 80% power 105A (at X 40°C), at 100% 94A or at other voltages. Power supply/input: Three-phase (3-PH), multiple voltages possible, 380-400V etc., U1 50/60 Hz. Protection class: IP23CS. Standards: EN60974-1, EN60974-10 Class A, GOST, etc. Power consumption (P1): 14.9kW/h (~14.9kW). Duty cycle at 40°C: 80% at 105A (at specific voltages), 100% at slightly lower currents (e.g. approx. 94A) at higher voltages, other combinations depending on voltage/standard. Length with handles: 592mm. Width: 274mm. Height: 508mm. Weight with torch (7.6m cable): 45kg. Table with sheet metal clamp, collection tray, and rail guide for the plasma cutter optionally available. Inspection on site is possible. Laedpfxoxddaas Ah Deh

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), Na voljo je 10 enakih varilnih naprav. Zavarovanje: 32A, varilni razpon: 40-350A, napetost v prostem teku: 18-43V, število stopenj preklopa: 20, varilni tok pri 100 % ED (40°C): 260A, dolžina: 900mm, širina: 560mm, višina: 950mm, teža: 120kg. Standardi: EN 60974-1/ IEC 60974-1 (mednarodni standard za obločno varjenje), zaščitni razred: IP 23, zaščita proti škropljenju vode in trdnim tujkom, manjšim od 12mm, primerno za zunanjo uporabo, razred izolacije: H, način hlajenja: AF (zračno hlajenje z ventilatorjem), varilni tokovni razpon: 40A/ 16V do 350A/ 31,5V, napetost v prostem teku (U₀): 18-43V. Delovni cikel pri 350A: 50 % ED, 5 min varjenja, 5 min pavze; pri 330A: 60 % ED, 6 min varjenja, 4 min pavze; pri 260A: 100 % ED, neprekinjeno delovanje. Priključna napetost: 3~400V, 50Hz (trifazni tok), največji priključni tok (I₁ max): 25A, efektivni priključni tok (I₁ eff): 18A. Dobro ohranjene, možen ogled na lokaciji. Laedpfx Ahexdc U Ao Doh

Leto izdelave: 2021, Stanje: pripravljen za uporabo (rabljen), There are 20 identical welding machines available. Type: cool41 U31, Standard: IEC 60974-1, -2, -10 C.L.A, Mains voltage: 400V, Frequency: 50/60Hz, Protection class: IP23, Power consumption P min: 0.9kW, Cooling capacity P max: 0.35MPa (3.5bar), Max. current consumption: 2.5A, Length: 539mm, Width: 210mm, Height: 415mm, Weight: 22kg. Control: Comfort 2.0, with intuitive operation via click wheel, infinitely variable pulse/spot/standard modes (especially useful for TIG welding), adjustable pulse break ratio (balance), e.g. from 10-90%, Hz and kHz pulsing up to approx. 15kHz, ActivArc technology: dynamic arc regulation to ensure consistent performance during stick-out variations and to prevent electrode sticking; improved root and penetration characteristics, spotArc/Spotmatic functions for spot welding and tacking, 2-stroke/4-stroke modes selectable via torch trigger, integrated MMA welding (often with MMA-pulse automation), adjustable gas pre-flow and post-flow times, adjustable upslope/downslope times, torch modes controllable via torch trigger (e.g. reduced secondary current, etc.), memory/JOB storage: recurring welding tasks can be saved (depending on version, approx. 8-100 JOBs), energy efficiency: high efficiency, standby function available. Laodjxdc Upjpfx Ah Dsh Remote control & interfaces: Remote adjusters and function torches can be connected, optional LAN/WiFi gateway (ewm Xnet), PC interfaces for parameter setting and monitoring. Very little used, inspection on site possible.

Leto izdelave: 2020, Stanje: kot nova (razstavni stroj), Električna moč 25 kVA Število krmiljenih osi: 6 Teža obdelovanca: 10 kg Teža stroja pribl. 1,55 t Demonstracijski stroj, kot NOV NOVA CENA: ~ 64.000 € Varilna robotska postaja Easy ARC 01.02 FD-B6 Welbee P500L MIG/MAG / vodno hlajenje / gorilnik RTW5000H / varilni robot tip FD-B6 z varilno mizo 2000x1200 mm Premer izvrtine 28 mm Mobilna varilna celica za obrtno delavnico Nastavitveno območje MIG/MAG 20 - 500 A Stopnje preklopa brezstopenjsko nastavljive Delovni cikel pri maks. toku 40°C: 50 % Tok pri 100 % ED pri 40°C: 410 A Hitrost podajanja žice 0 - 22 m/min Ledpfexcuwgox Ah Doah

Stanje: rabljeno, Mera okvirja: 4100 x 2520 mm Ljdpfxsxct Ans Ah Doah Mera kabine: 3000 x 2520 x 2500 mm višina + dimnik: 600 mm

Stanje: rabljeno, Mera okvirja: 4100 x 2520 mm Mera kabine: 3000 x 2520 x 2500 mm višina + dimnik: 600 mm Ledexctwljpfx Ah Dsah

Leto izdelave: 2009, Stanje: pripravljen za uporabo (rabljen), Moč laserja: 4kW, delovno območje X/Y/Z: 4000mm/2000mm/115mm, največja debelina pločevine konstrukcijsko jeklo/nerjaveče jeklo/aluminij: 20mm/15mm/10mm, največja teža obdelovanca: 1700kg. Dimenzije stroja X/Y/Z: pribl. 11600mm/5300mm/2200mm, teža: pribl. 15000kg. Vključuje Trumpf Liftmaster. Dokumentacija na voljo. Možen je ogled na lokaciji. Lodpfx Ajxbhgxeh Deah

Leto izdelave: 2005, Stanje: zelo dobro (rabljeno), Zelo dobro, komaj uporabljeno Laedpfxoxbft Nj Ah Djh

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, številka stroja/vozila: L4211M3217, laserska moč: 5.000 W, valovna dolžina laserja: 1.030 nm, širina obdelovanca (maks.): 400 mm, višina obdelovanca (maks.): 400 mm, The system consists of two identical laser welding cells. The following components are included: Trumpf TruDisk 5001 laser source (laser source for both cells) Trumpf disk laser 12-12-30-A32/11 with focusing optics (PFO) PRIMES FocusParameterMonitor (FPM) for laser measurement and determination RITTAL SK 3185830 electrical cabinet cooling unit HERDING Comp 1500-8/9 SB welding fume extraction system HERDING Multicoater_MCI 55/1 metering unit (for the addition of additives to the filtration process) The system was previously used for manufacturing Li-ion batteries (E-Smart). The process involved welding cell connectors for serial interconnection in cell blocks. Cycle time per cell block in the aforementioned production: 3–4 minutes. The system was professionally dismantled in March 2025. TECHNICAL DETAILS Workpiece height: 40 cm Workpiece width: 40 cm Welding fume extraction air volume: 2,000 m³/h Trumpf TruDisk 5001 Laser power at the workpiece: 5,000 W Infinitely adjustable power range: 120 W – 5,000 W with active power control Wavelength: 1,030 nm Minimum fiber diameter: 100 μm MACHINE DETAILS Weight per cell: 6,021 kg Trumpf TruDisk 5001 weight: approx. 900 kg Chiller weight: approx. 300–400 kg Rated current: 20 A Connected load: 12 kVA Ljdpfexazzmjx Ah Djah