Möbelwerkstatt Wettlkam

Stanje: rabljeno, Število vrtljajev 3500/6000/8000/10000 rpm Premer vretena 30 mm Moč motorja 4 kW Nagibni vretenasti rezkar ali mizna rezkalka Holzkraft / SCM Minimax T 55i za natančno rezkanje, profiliranje in utore masivnega lesa in lesnih materialov. Stroj ima nagibno rezkalno vreteno in vodilne sani, tako da omogoča vsestransko obdelavo pod različnimi koti. Idealen za mizarje, proizvodnjo pohištva ter notranje opremljanje. Vključno z dovajalno napravo, kotnim prislonom in opremo za rogljičaste spoje pri izdelavi predalov. Dkodey Nd Uqspfx Aplol

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Robust tilting spindle moulder T 26, tiltable from -45 to +45 degrees Tilting spindle moulder with premium features A treat for any Martin enthusiast Dkedoy Ig Iwspfx Aplsl Dual-speed drive motor 5 / 6 kW with automatic motor brake Forward/reverse run Tilting angle from -45° to +45°, electrically adjustable Maximum height adjustment 150 mm, electrically adjustable When adjusting the height, the correction factor for the tilt angle is displayed on the upper readout and can be set directly at the stop—this allows for precise settings based on drawings Four spindle speeds: 3,000, 4,500, 6,000, and 9,000 rpm Spindle diameter 30 mm, quick-change arbor (Dornfix) with torque wrench Premium fence T226 with digital readouts for total adjustment and individual infeed jaw, as well as input for cutter diameter—the cutting depth is calculated automatically Fence can be swung away via lifting device (for curved routing work) Table opening adjustable via eccentric table rings, electrically operated, with three additional insert rings Table extensions left and right with pull-out workpiece support Support can be extended by 700 mm Table length approx. 2,400 mm Swing-away fence for slot mortising Aigner Centrex workpiece pressure device Aigner integral fence, left 500 mm, right 600 mm New 4-roller feed unit Steff 2048, with 8 speeds, forward/reverse run Feed socket, switchable from control panel Comfort stand with electrically height-adjustable feed support, can be swung out for machine setup and re-engaged easily afterwards Zeromaster for easy height setup Extraction ports 2 x 120 mm Compressed air connection 6 bar Emergency stop switch Some parts of the machine freshly repainted Feed system renewed Drive belt replaced Operating manual CE certified Dimensions approx. 3,000 x 1,500 x 1,830 mm (LxWxH). Weight approx. 1,800 kg. The machine can be inspected and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse. See ‘more offers from this provider’.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, moč: 3 kW (4,08 KM), vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, premer vretena: 30 mm, vrtilni razpon: 45 °, nastavitev vzdolžnega vodila: ročni, vrsta aktuacije: ročni, največja hitrost vrtenja: 7.800 obr/min, vrtljajska hitrost (min.): 3.700 obr/min, Felder namizni rezkar F-38 letnik 1994 z dovajalnikom Felder F38 letnik 2020 3 kW motor Nastavitev višine z ročnim kolesom Dkodpsy Hmbnofx Aplel Nastavitev nagiba z ročnim kolesom Največji premer orodja 220 mm Levo/desno vrtenje 3 hitrosti 37 Drsna miza s podaljškom in prečno ograjo Dodatna rezkarska kapuca za orodja do premera 300 mm Nastavitev hitrosti s prestavljanjem ploskega jermena s hitro zapiralo Ogled in preizkus sta vedno mogoča in zaželjena Možno tudi ob nedeljah ali zvečer Nakladanje z viličarjem

Stanje: novo, Leto izdelave: 2022, Ex College, stanje A1 - Nerabljeno Velikost delovne mize: 1200 x 700 mm Uporabna višina vretena: 140 mm Največji izstop vretena nad mizo: 190 mm Hitrosti vrtenja vretena: 1300 / 2500 / 3500 / 5000 / 6000 / 8500 min⁻¹ Največja velikost orodja, ki se lahko umakne pod mizo: 320 x 50 mm Glavna moč motorja: 5,5 KM Kot nagiba vretena: -5° do +45° Fiksno vreteno premera 1 1/4" (31,75 mm) Premična ograja, največji premer orodja: 250 mm Mehanski prikazovalnik in ročno kolo za celoten pomik ograje Mehanski prikazovalnik in ročno nastavljanje za desno dovodno ograjo Priključek za odsesavanje na kapuci: Ø120 mm Priključek za odsesavanje na zadnji strani stroja: Ø120 mm Dodpfx Apjy Efvholekl Gravitacijski prikazovalnik naklona vretena - nastavitev z ročnim kolescem Dvig/spust vretena na motorni pogon z decimalnim prikazovalnikom višine Varnostno stikalo na vratih Varnostno mikro stikalo na sestavu ograje Glavno stikalo s ključavnico Elektromagnetna zavora vretena LED prikazovalnik nastavitve hitrosti vretena Gumb za izklop v sili Predpriprava (električna) za priklop podajalne enote (Feeder za doplačilo) Podaljška mizne plošče levo in desno, skupaj 200 mm, celotna dolžina z izvlečno čelno podporno letvijo

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Enostavno upravljanje Nagibna os do 45° Dolžina mize cca 1.300 mm (z razširitvami) Konzolna miza in omejevalno ravnilo Premer vretena Ø 30 mm Vreteno z levim in desnim vrtenjem Hitrosti 3.000, 4.500, 6.000, 9.000 obr/min Vključno s 4-valjnim pogonom Wegoma Vario Vključno z zaščitno napravo Suva za profiliranje Dkedpfxoy Ecywo Aplol Teža cca 900 kg Moč motorja 7,35 kW

Stanje: rabljeno, Leto izdelave: 1992, Machine cleaned, functionally tested, partially overhauled. Spindle runout extremely precise, max. 0.01 mm Pneumatic hoses, filter pressure regulator, and mist lubricator replaced Test run performed Used, excellent condition, top features with plunge spindle This milling machine allows for plunge and withdrawal milling operations. The milling spindle can be pneumatically plunged in and out via a table that is moved by adjustable limit switches. Make: Hofmann Dksdpjy Ay Dzefx Aplol Model: TFS 1200 Year of manufacture: 1992 Machine no.: P127-92-222-723 Motor: 5.0 / 6.2 kW, reinforced Swiveling from -5° to +45° Motor brake 2-speed/pole-change motor 6 speed levels: 3 / 4 / 5 / 6 / 8 / 10,000 rpm Forward and reverse rotation Table size: 2000 x 830 mm Milling arbor diameter: 30 mm Fine-adjustable fence Digital displays for fence position, diameter, and cutting depth Electric height adjustment Electric swivel adjustment Digital displays for swivel angle and spindle height Extraction port: diameter 2x 120 mm Space requirement approx. 2000 x 1600 x 1400 mm Weight approx. 1000 kg Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in as-inspected condition, functionally tested No overhaul, no warranty or guarantee

Stanje: rabljeno, Leto izdelave: 1996, rabljeno, vrhunsko stanje delno obnovljeno, stikalo novo Vrtlina vretena 3/100 mm Motor na novo ležajen in preoblečen Blagovna znamka Lazzari Tip Base 45 Letnik 1996 Št. stroja 9601076 CE certifikat vzorca Motor 4,0 kW nagibno 45° avtomatska zavora 5 stopenj hitrosti 3 / 4,5 / 6 / 8 / 10.000 / min. obrati v desno-levo Velikost mize 1100 x 700 mm Premer vretena 30 mm Upravljalna plošča zgoraj Priključek za odsesavanje D 120 / 120 mm Potreben prostor pribl. 1100 x 1200 x 1400 mm Teža pribl. 490 kg Priključna moč skupaj 4 kW Lokacija 97447 Gerolzhofen, prosto naloženo, nezapakirano Djdpfjy Ay Dnex Apljkl Predaja v stanju kot je bilo videno, brez garancije in jamstva

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Tilting spindle moulder with long work tables and feed unit Motor power: 5.5 kW, 400 V, 50 Hz Spindle speeds: 3,500/ 4,500/ 6,000/ 8,000/ 10,000 rpm with digital display Usable spindle height: 180 mm Vertical spindle travel: 155 mm Interchangeable spindle MK 5 Ø 30 mm Spindle tilting range: +45° / -10° Spindle height adjustment electrically controlled with digital display Spindle angle adjustment electrically controlled with digital display Fence adjustment manually with fine adjustment Spindle has forward and reverse rotation CE compliant Extraction connection: 2 x 120 mm Working height: 860 mm Includes: - Curved moulding fence Djdpfoyynptex Aplskl - Interchangeable spindle MK 5 Ø 25 mm - Interchangeable spindle MK 5 Ø 50 mm Dimensions (L x W x H): approx. 2650 x 1250 x 1700 mm Weight: approx. 1000 kg HOLZHER feed unit - 3 rollers - 8 speeds Note on used machinery: • Technical data subject to errors and prior sale. • All prices quoted are ex works - loaded free of charge! • Machines have been cleaned and function tested. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries that include your address and telephone number!)

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 25 h, moč: 7,35 kW (9,99 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, premer vretena: 30 mm, vrtilni razpon: 45 °, vrsta aktuacije: električni, dolžina mize: 1.300 mm, leto zadnje generalne obnove: 2025, Oprema: CE označba, vrtilna hitrost brezstopenjsko nastavljiva, Ponujamo skoraj nov Format4 profil 45 Z x-motion nagibni vretenasti rezkar, letnik 2025. Format4 Profil 45 Z X-Motion - 3 x 400 V, 50 Hz, 7,35 kW - CEE vtič za dodatne naprave 400 V - Miza za čepljanje in utore 1300mm, eloksirana - Podaljšana miza 1100mm - Blokada rezkalnega vretena od zunaj - Nadzor števila obratov za utorne diske - Hitro vpenjanje vodila rezkarja - Prečni omejevalnik 2600mm - Integralni omejevalnik Aigner - Rezkalno vreteno 30mm Letnik 2025 Na voljo od junija Djdpfxjyv Awqo Apljkl Če imate vprašanja ali potrebujete več informacij, nam pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1994, Nagibna vretenasta rezkalnica Proizvajalec: Martin Tip: T25 Leto izdelave: 1994 Nagibni razpon: -5° do +45° Električna nastavitev višine in kota Premer vretena: 2 vretena, 30 mm / 40 mm Moč: 5/6 kW Dsdeyvrnrepfx Aplskl Število obratov: 3.000 / 4.500 / 6.000 / 9.000 min⁻¹ Levo-desni tek: Da Motorna zavora: Da Teža: Pribl. 1.500 kg

Stanje: rabljeno, usato, in ottime condizioni, incl. guida fresatrice Guida fresatrice con regolazione micrometrica, regolazione centrale tramite cremagliera, macchina completamente pulita e lubrificata, parzialmente revisionata. Vari componenti sostituiti Interruttore stella-triangolo revisionato Freno a pedale regolato Ganasce della guida sostituite, Rotazione mandrino verificata: perfetta precisione 0,01 mm Marca: Bäuerle Modello: SFM 2 N° macchina: 8719 Inclinabile da 0 a 45° Freno Motore a 2 velocità/cambio poli 6 velocità: 1.800 - 4.500 - 5.600 - 6.000 - 9.000 - 12.000 giri/min Rotazione destra/sinistra Dimensione tavola: 1150 x 1200 mm Diametro albero fresatrice: 30 mm guida fresatrice Djdpfx Aoyt R Nuepljkl Ingombro circa 1200 x 1200 x 1300 mm Peso ca. 1.000 kg Ubicazione: 97447 Gerolzhofen, caricato franco, non imballato Consegna nello stato in cui si trova come visionato, testata la funzionalità senza revisione completa, senza garanzia né responsabilità

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, največja hitrost vrtenja: 9.000 obr/min, vrtljajska hitrost (min.): 1.800 obr/min, širina mize: 360 mm, dolžina mize: 1.000 mm, skupna masa: 218 kg, Oprema: CE označba, Smooth and effortless movement of the sliding table ensures easy and convenient processing of large workpieces. The robust spindle moulder guard, featuring precisely adjustable aluminium fence rails, guarantees accuracy and operational safety. An electronic display provides fast and clear spindle speed readings. Standard equipment includes a tilting fence with an eccentric clamp for stable material guidance. The dynamically balanced spindle ensures exceptionally quiet and smooth operation. Spindle speed changes are quick and convenient via a multi-ribbed belt. The optional stable outrigger table allows for machining large components without additional support. All aluminium components (sliding table, fences, etc.) are anodised for increased durability and corrosion resistance. The large spindle moulder unit, made from grey cast iron and tiltable from +5° to -45°, offers extensive application possibilities. The backward-tilting spindle delivers additional benefits, such as optimal feed utilization, maximum safety, and precise machining. Technical specifications Table size – width: 1000 mm Table size – depth: 360 mm Sliding table length – panel saw/roller: 1000 mm Sliding table width – panel saw/roller: 240 mm Sliding table, carriage type: Panel saw Dksdsyt I Egepfx Aplel Outrigger table dimensions (optional): 600 x 410 mm Working height: 895 mm Spindle diameter: 30 mm Tilting spindle range: +5° to -45° Spindle height adjustment: 100 mm Clamping length: 100 mm Max. tool diameter: 200 mm Max. lowered tool diameter: 180 mm Table opening: 200 mm Min. spindle speed: 1,800 rpm Max. spindle speed: 9,000 rpm Number of spindle speeds: 4 (1800 / 3000 / 6000 / 9000) Extraction port diameter: 100 mm Motor power: 3.9 kW Motor power S1 100%: 2.8 kW Voltage: 400 V Dimensions (W x D x H): 1240 x 710 x 1200 mm Weight approx.: 218 kg

Stanje: rabljeno, Leto izdelave: 1994, Used, top condition, high-end equipment, extensive accessories with 3-axis control, pneumatic spindle change, electronic adjustment of the milling fence 99 memory programs, 15 interchangeable spindles, adjustable table insert Make: SCM Model: T150 Class Year of manufacture: 1994 Upgraded motor 6 / 7.5 kW Tiltable from -10° to +45° Motor brake Dedpfx Apjythdvoljkl Motor with 2 speeds / pole-changing Speed ranges: 3250/5000/6500/10,000 rpm Right and left rotation Table size: 2700 x 700 mm Spindle diameter: 15 x 30 mm / 1 x 40 mm Spindle mount: HSK Quick-change spindle system SK / HSK Table extension: 2 x 650 mm Extendable frame support Aluminium fence jaws Milling fence with fine adjustment Digital displays for milling fence – diameter – cutting depth – jaw offset Guard and pressure device Control panel on top Swiveling control panel - electric height adjustment - electric swivel adjustment - electric milling fence Positioning control for 3 axes: height / swivel / milling fence with 99 programs Digital displays for swivel angle – spindle height – fence depth Swing-away device for the milling fence Socket for feed unit Original price approx. 40,000 – 45,000 EUR Extraction port: 120 x 120 mm Space requirement approx. 2700 x 1300 x 1800 mm Weight approx. 1073 kg Storage location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery in current condition as inspected, function tested without refurbishment, without guarantee or warranty

Stanje: zelo dobro (rabljeno), Spodnji rezkar Felder F 700 Z Drsni voziček v mizi 205 cm, vreteno nastavljivo gor-dol ter pod kotom 0-45 stopinj, Dsdpfx Apsyn Iu Rsljkl menljiv vretenasti trn premera 30 mm, motor 7,3 kW, električna zavora, smer vrtenja levo-desno, 4 hitrosti vrtenja. Zelo dobro ohranjena, povsem pripravljena za delo.

Stanje: rabljeno, rabljeno, v dobrem stanju, malo uporabljeno Stroj popolnoma očiščen, podmazan preizkusni tek Izmerjena krožnost vretena največ 1/10 mm Proizvajalec Bäuerle Dkjdpfxoycxg Hj Aplel Tip SFM 2 Št. stroja B1533 nagibljiv od -5° do +45° mehanična zavora 6 stopenj hitrosti: 2800/4500/5600/9000/6000/12000 vrt/min Desno-levo vrtenje Velikost mize 1100 mm x 900 mm Premer vretena 30 mm Litoželezne vpenjalne čeljusti Frézno vodilo z fino nastavitvijo Priključek za odsesavanje D 120 mm Potrebni prostor pribl. 1100 x 1100 x 1200 mm Teža pribl. 1000 kg Skladišče: 97447 Gerolzhofen, prosto naloženo, nepakirano Predaja v videnem stanju, brez garancije in jamstva

Stanje: potreben popravila (rabljeno), Leto izdelave: 1991, Nagibni vretenasti rezkar Dodpox Tgtwofx Apljkl Proizvajalec: Panhans Tip: 240 Leto izdelave: 1991 Električno zaznavanje dejanske vrednosti kota ne deluje. Miza: 135 x 80 cm Moč: 11 kW Območje nagiba: -5° do +45° Nastavitev kota: električna Nastavitev višine: električna Hitrosti: 3/4,5/6/9.000 vrt/min Levo-desni tek: da Motorna zavora: da Teža: cca 780 kg Vključno s podajalnikom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1996, Tilting spindle moulder / Table milling machine / Wood milling machine / Joiner's spindle moulder CASOLIN Model: F45 Year of manufacture: 1996 5 adjustable speeds: 3000/4500/6000/8000/10,000 rpm Table dimensions approx. 130 x 90 cm Milling fence with fine adjustment Electric height adjustment with digital display Electric tilting from -5° to +45° with digital display for the tilt angle Spindle diameter: 30 mm Matching power feeds can be found in my other listings. Condition: see pictures, or refer to the item description. Parts can also be collected in person. All dimensions are approximate. All details provided to the best of my knowledge but without guarantee. Subject to prior sale. The items can be collected by the buyer or shipped at the buyer’s expense. Dedpsx Dmnajfx Apljkl Shipping costs are indicative and may vary depending on distance and unloading options. The listed price is a net amount plus VAT. An invoice including VAT will be issued. Warranty basis: Due to wear and tear on used parts, the items are fundamentally offered as defective — for spare parts only, and sold exclusively to traders. By placing a bid, the buyer accepts this as the basis of the sales contract.

Stanje: novo, Table size 1,200 x 780 mm Motor power 7.5 kW Spindle diameter 30 mm Dkjdpexyafqofx Aplsl Fimal TX 160 tilting spindle moulder ----- Partnership Edition Offer: - Fimal TX 160 (7.5 kW) - 10 HP motor - Forward and reverse run - Upper control panel with electronic digital display for spindle height and tilt ----- General Technical Manufacturer Description: The FIMAL TX160 sets new standards in modern woodworking. With a precise tilting spindle, innovative control technologies, and a robust construction, it offers maximum stability and flexibility for demanding milling operations. Thanks to the stepless tilting adjustment, precise digital control, and powerful motorization, the TX160 is ideal for joineries, furniture makers, and industrial manufacturing. - Milling fence incl. parallel adjustment with handwheel and digital display, handwheel adjustment with digital display for the front fence jaw, electric travel tilting device for the entire fence, quick-release lever for fixing aluminum fence jaws and pressure device - Curved milling fence - Electromotive spindle height adjustment incl. digital display and decimal increment setting - Table insert adjustable to the diameter of the milling tool (instead of table insert rings) - Indicator lights for set milling speed - Electrical system and safety equipment according to CE standards - Table dimensions: 1,200 x 780 mm - Milling spindle d= 30 mm, H= 140 mm - Milling speeds: 1500/3000/4500/6000/8000/10000 rpm - Max. tool size under table: d= 320 mm, H= 50 mm - Motor: 5.5 kW / 7.5 HP / 50 Hz - Noise level according to EN 27960: 83.9 – 87.3 dB(A) - Spindle tilt: -45° to +45° - Electromotive spindle tilt adjustment incl. electronic display and decimal increment setting - Max. spindle height at 30 or 35 mm diameter: 140 mm - Max. spindle height at 40 or 50 mm diameter: 180 mm - Total spindle stroke: 220 mm - Table opening: 340 mm ----- Price for the above-mentioned machine on request! ----- (Technical specifications according to manufacturer – subject to change!) All prices net. Plus statutory VAT. Photos show the same model. Original images not yet available.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1987, Funkcionalnost: popolnoma funkcionalen, 4 hitrosti vrtenja: 3000/4500/6000/9000 obr/min. Desni/levi tek Krmilna plošča zgoraj Podaljški mize in izvlečna mizna podlaga Dkedpfxexwxrqj Aplsl Motor 4,7/5,7 kW Premer vretena 30 mm Teža pribl. 1000 kg z dovajalno napravo WEGOMA VS 34, 3 valji Stol za čepenje za prečno obdelavo

Stanje: rabljeno, Table size: 2500 x 780 mm Motor power: 7.5 kW Spindle diameter: as required Speed range: 1,500 – 10,000 rpm FIMAL Tilting Spindle Moulder TX 160 L Dksdpfx Apjxpi D Ielsl --- 4-axis control: spindle height, tilting, parallel adjustment of the fence, and adjustment of the motorized table insert, incl. upper control panel with automatic star-delta starting for the spindle motor. Touchscreen, tool management, and program control based on Windows. Fence including controlled parallel adjustment (1st axis), manual adjustment with digital readout for the front fence jaw, electric swing-away device for the entire fence, quick-release lever for fixation, aluminum fence jaws, and pressure device. Controlled electro-motorized spindle height adjustment (2nd axis). Controlled electro-motorized spindle tilting adjustment (3rd axis): -45° to +45°. Table insert adjustable according to cutter diameter (instead of table insert rings). The table insert is motorized (4th axis). Milling speeds: 1500/3000/4500/6000/8000/10000 rpm (displayed on touchscreen). Electrics and safety devices in accordance with CE standards. Table dimensions: 1,200 x 780 mm. Max. tool size under table: d = 320 mm, H = 50 mm. Motor: 7.5 kW / 10 HP / 50 Hz. Version "L" with table extension on both sides and pull-out workpiece support. With emergency stop button. Reversible operation (left/right) according to CE standards. Curved fence for moulding. Option at extra cost: 4-roller power feed Type VSA 2048 L Consistent feed speed without power loss Reversible operation (left/right) Includes stand, can be individually swiveled and adjusted for horizontal and vertical use Eight speeds available, speed selection via switch and change gear Extra cost: 1,149.00 Euro Shipping costs, including installation and 4 hours of instruction: Extra cost: 1,400.00 Euro (technical data as per manufacturer - subject to change without notice)

Stanje: zelo dobro (rabljeno), Spodnji vretenasti rezkalni stroj Panhans 240A Premer vretena: 30 mm Dolžina vretena: 130 mm Spremenljiva hitrost vretena: 3000/4500/6000/9000 obr/min Elektronsko nastavljanje višine vretena Djdpsxg Iz Hjfx Aplskl Elektronsko nastavljanje omejevalnikov Elektronsko nastavljanje kota Štirivaljni potisni sistem SCM

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, Motor 7,35 kW 5 hitrosti 3500-10000 min–1 Nagib vretena rezkalnika 0-45° Dolžina pomične mize 1300 mm električno nastavljanje višine in nagiba Električno nastavljiv rezkalni omejevalnik Rezkalni omejevalnik popolnoma zložljiv Maksimalni premer orodja 250 mm Aluminijaste čeljusti omejevalnika 550 mm Centrex zaščita za rezkanje Dedpfx Apsxbq Uljljkl Teža cca. 700 kg

Stanje: skoraj kot novo (rabljeno), For sale is a used Felder spindle moulder F-900 Z featuring a tenoning and slotting table with a length of 1300 mm. The machine has only been used as a display model in our showroom and is therefore in like-new condition. Technical specifications: - 5 spindle speeds - Spindle tiltable from 90° to 45° - Cutter fence for tooling up to Ø 230 mm - Multi-adjustment system - Tenoning and slotting table 1300 mm Dodpfx Aew Hfd Ioplokl - Electrically height-adjustable and tiltable "PowerDrive" - Motor power: 7.3 kW / 9.9 HP SD-Start - Year of manufacture: 2022 The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Info Tel. 06244-20299. Related keywords: spindle moulder, milling machine, milling Reference: R-A0117

Stanje: rabljeno, used Manufacturer: Schneider Model: SK 1/2 Machine no.: 10144 GS-certified Motor power: 5.5 kW Tilting range: -5° to +45° Electromagnetic brake Motor with 2 speeds / pole-changeable 6 speed steps: 4000/5000/6000/8000/10000/12000 rpm Reversible (left/right rotation) Table size: 1150 mm x 850 mm Spindle diameter: 30 mm Spindle fence with fine adjustment Control panel Extraction port D 100 / 120 mm Space requirement approx. 1600 mm x 1200 mm x 1500 mm Weight approx. 1000 kg Total connected load: 5.5 kW Location: 97447 Gerolzhofen, free loaded, unpacked Delivery as is, as inspected No warranty or guarantee Djdpfew Dgbiex Aplekl

Stanje: kot nova (razstavni stroj), Funkcionalnost: popolnoma funkcionalen, moč: 7,35 kW (9,99 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, premer vretena: 30 mm, vrtilni razpon: 46 °, največja hitrost vrtenja: 18.000 obr/min, vrtljajska hitrost (min.): 1.000 obr/min, The new profil 92 M e-motion spindle moulder is the Format4 premium model designed for maximum operating comfort and guarantees absolute efficiency with minimal setup times during milling operations. The advanced electrospindle features an HSK 63F interface for a pneumatic tool quick-change system. The swiveling range of ±46° allows for unlimited processing versatility. With the self-explanatory e-motion control via the 15" touchscreen operating panel, spindle speed, spindle height and angle, as well as fence adjustment and even the table opening, can be set intuitively and precisely. Memory slots for tools, spindles, and milling programs ensure perfect repeat accuracy and the shortest setup times. Controlled, eccentric supporting rings provide maximum table support area and significantly reduce adjustment effort, particularly during spindle swiveling. The newly developed, heavy-duty precision milling fence features two controlled axes for precise depth adjustment of the entire fence and an additional, independent depth positioning of the right (infeed) jaw. For comfortable access during curved milling operations, the fence can be completely swung away from the working area. Optionally, the Format4 profil 92 M e-motion can also be equipped with an electrically height-adjustable feed unit. Further technical data: Tool diameter: max. 250 mm Usable spindle height: 140 mm Height adjustment: electric Optional equipment: 12 Potential-free contact 106 HSK 63F milling spindle Ø 30 mm, 140 mm 118 650 mm "Integral" safety rulers 119 Table opening 255 mm with controlled eccentric supporting rings 183 Table extension on both sides 670 mm with 2200 mm pull-out frame 213 Electrically height-adjustable feeder support incl. horizontal tube 220 Parts list holder with A9 clipboard Benefits: Dksdpfxjwztr Ns Aplol - Highly efficient electrospindle with stepless speed control and HSK 63F interface - Positioning control for milling height and angle +/–46º - Positioning control for milling fence with offset - Smartouch with intuitive e-motion control system - Table opening with controlled eccentric supporting rings (option) - Electric height adjustment for feeder unit on overhead column (option) Additional information: - The electrospindle is equipped with an HSK F63 quick-change system - Clamping range: 2–25 mm for OZ25 collets - "Integral" safety rulers: 650 mm - Table extension on both sides 670 mm with 2200 mm pull-out frame - Table opening 255 mm with controlled eccentric supporting rings