Valmeco AS

Stanje: zelo dobro (rabljeno), CATALOG NUMBER 7679 TECHNICAL DATA - Maximum planing width: 610 mm - Maximum planing height (double-sided): 200 mm - Electric table adjustment up/down - Maximum planing height (four-sided): 100 mm – Top section: - Feed-in roller, toothed - Kickback devices - Pressure unit - 2 feed rollers, toothed - Pressure unit - 610 mm, 4-knife planing cutterhead, 7.5 kW - Pressure unit - Outfeed roller, smooth – Bottom section: - Guide bar - Feed roller, toothed - 610 mm, 4-knife planing cutterhead, 5.5 kW - 2 smooth feed rollers – Rear section: - 2 side spindles + pressure unit 1) Right vertical 100 mm, 4 kW 2) Left vertical 100 mm, 4 kW - Spindle diameter: 35 mm - Vertical spindles adjustable up/down, right/left - Manual planing width adjustment Lhodpfx Aey T Rhxodlsg - 6 feed speeds: 7/9/11.5/14/18/23 m/min - Feed motor: 3.1 kW - Dimensions (LxWxH): 2500x1800x600 mm - Weight: approx. 3000 kg ADVANTAGES – Ideal for log processing, flooring, etc. – Made in Germany by KUPFERMUHLE – 2 horizontal cutterheads + 2 vertical spindles – Used planer in very good condition Net price: 56,900 PLN Net price: 13,550 EUR (depending on exchange rate 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), Catalogue number: 7995 TECHNICAL DATA - Maximum planing width: 240 mm - Maximum planing height: 140 mm 4 spindles: 1) Bottom horizontal 240 mm, 5.6 kW 2) Right vertical 140 mm, 5.6 kW 3) Left vertical 140 mm, 7.5 kW 4) Top horizontal 240 mm, electrically adjustable up/down 0.37–7.5 kW - Diameter of all spindles: 40 mm - All spindles adjustable up/down and left/right - 5 upper feed rollers, geared and swivelling, including 1 double roller - 2 upper outfeed rollers, rubber-coated, feed type - Lower outfeed metal feed roller, split type - Pneumatic pressure rollers - 3 side pressure units - Electric thickness adjustment: 0.37 kW - Infeed table length: 2080 mm - Stepless feed speed regulation via frequency inverter - Feed via Cardan shafts - Feed motor: 3.7 kW - Centralized lubrication - Extraction port diameters: 4 x 125 mm - Dimensions (L/W/H): 3600 x 1650 x 1700 mm - Weight: approx. 3000 kg Lhjdpfsy T N Ahjx Adlsg ADVANTAGES – German-made by GUBISCH – Four-head planer – DTR technical documentation – Used planer, in very good condition Net price: 32,900 PLN Net price: 7,840 EUR (at 4.2 EUR exchange rate) (Prices are subject to change with greater fluctuations)

Stanje: zelo dobro (rabljeno), Catalogue number 7994 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) Bottom horizontal 230 mm 4 kW 2) Right vertical 130 mm 3) Left vertical 130 mm (spindles 2 and 3) 11 kW 4) Top horizontal 230 mm 5.5 kW 5) Top horizontal 230 mm 5.5 kW - Spindles 4 and 5 electrically adjustable up/down 6) Bottom horizontal 230 mm 4 kW 7) Universal 230 mm, adjustable 360° 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 4 infeed driven, toothed rollers - Top: 4 outfeed driven rollers, rubber, smooth, including 3 double - Bottom: one metal driven roller - Feed by Cardan shaft rollers - Pneumatic pressure rollers - Infinitely variable feed speed via inverter - Feed motor: 3 kW - Working pressure: 6-10 bar - Electric adjustment of planing thickness - Central table lubrication - Infeed table length: 1960 mm - Extraction port diameters: 3x120 mm, 4x140 mm - Dimensions (LxWxH): 5360x1800x1660 mm Lhedpey T Nu Defx Adlog - Weight: approx. 4000 kg ADVANTAGES – German manufacturing, WEINIG brand – 7 heads – Technical documentation (DTR) – Universal spindle – Used planer in very good condition Net price: 75,900 PLN Net price: 18,070 EUR (depending on rate 4.2 EUR) (Prices may vary with significant fluctuations)

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Šestvretenska skobeljna "SCM" model SUPERSET XL V380/50 - "CE" RABLJENA - ZELO DOBRO OHRANJENA, ŠE V DELOVANJU [ID: cvn-088] Lsdpfx Aey T Ndlsdlshg - 6 vreten: SPODAJ/DESNO/LEVO z CNC/ZGORAJ/SPODAJ/UNIVERZALNO - Delovna širina: 230 mm - Tandemska naprava za kratke kose - Motovariator hitrosti - POPOLNA Z REZKAMI Na voljo do prodaje.

Stanje: dober (rabljeno), Leto izdelave: 2003, Sestavljen iz: 4 x prečnih verižnih transporterjev dolžine 6000 mm, nameščenih na tleh 1 x TRANSLYFT dvižna miza, dvojni škarjasti model, 4000 x 1000 mm, največja nosilnost: 4000 kg 4 x verižni transporterji, 1000 mm, nameščeni na vrhu dvižne mize 1 x THOMAS PETTERSSON TP600 vakuumska dovajalna naprava, največja širina med vakuumskimi priseski: 4000 mm (lahko dvigne predmete dolžine 6000 mm) 1 x električna omara THOMAS PETTERSSON Lhedpfxsy Tzi Tj Adlsg 1 x pogonski tračni transporter, 8000 mm

Stanje: rabljeno, Leto izdelave: 2001, Number of spindles: 8 pcs. Working width: 230 mm Planing height: 160 mm Feed motor: 5.5 kW Feed speed: 36 m/min Control system: Logocom Planing and profiling machine Weinig Unimat 3000 Brillant. Computer-controlled ProfiCenter for planing and profiling operations with CNC-controlled spindles and Weinig EM11 feed magazine. The control panel was updated in 2021 with the current Simatic Panel PC677C-15”. Sale is conducted on behalf of the customer from the current location. Inspection is possible at any time by appointment. Spindle 1: bottom / HSK Powerlock / 12,000 rpm Spindle 2: right / HSK Powerlock / 4,000 – 12,000 rpm Spindle 3: left / HSK Powerlock / 4,000 – 12,000 rpm Lhedpfx Adsy Ty H Doljg Spindle 4: right / HSK Powerlock / 4,000 – 12,000 rpm Spindle 5: top / HSK Powerlock / 4,000 – 12,000 rpm Spindle 6: bottom / HSK Powerlock / 4,000 – 12,000 rpm Spindle 7: top / HSK Powerlock / 4,000 – 12,000 rpm Spindle 8: bottom / HSK Powerlock / 4,000 – 12,000 rpm All spindles: CNC-controlled (except spindles 6 & 8)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1981, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2904-3140, Štiristranski skobeljni stroj z 8 rezili. Hitrost obdelave 8-25 m/min. Širina skobljanja 200 mm, višina 140 mm. 1 vodoravno vreteno. 2., 3. in 4. vertikalno. 5., 6. in 7. vodoravno, 8. univerzalno. Vretena 40 mm, glave 230 mm. 1 motor 7,5 kW, 2. 5,5 kW, 3. 7,5 kW, 4. 4 kW, 5. 11 kW, 6. 11 kW, 7. 5,5 kW, 8. 5,5 kW. Reduktorski motor 4 kW. Lodpoy Tynhofx Adlehg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Štiristranska skobeljnica SCM Superset XL Delovna širina: 15-230 mm Delovna višina: 6-120 mm Število vreten: 5 Razpored vreten: Spodaj Desno Levo Zgoraj Ledpfx Aey Ttryodljhg Spodaj Hitrost vreten: 6000 obr/min Pnevmatski pritiskači Podajalna hitrost nastavljiva z variatorjem: 5-25 m/min Pogon preko kardanske gredi CE certifikat

Stanje: zelo dobro (rabljeno), Catalogue number: 6393 TECHNICAL DATA - Max. working width: 200 mm - Max. working height: 150 mm - Number of spindles: 4: 1) Bottom horizontal: 200 mm, 5.5 kW 2) Right vertical: 150 mm, 4 kW 3) Left vertical: 150 mm, 4 kW 4) Top horizontal: 200 mm, 5.5 kW - All heads adjustable up/down and right/left - Spindle diameter: 40 mm - Spindle speed: 6000 rpm From the top: - 6 feed-in toothed rollers, including 2 double rollers Lhsdpfx Adey Ti R Eeljg - 1 feed-out rubber roller From below: - Feed-in toothed roller, driven and swivel-mounted in the lower table - 3 side pressure elements - Feed-out metal roller, smooth and driven - All rollers with pneumatic pressure - Infeed table length: 2130 mm - Table adjustable up/down - Centralised lubrication - Electric thickness adjustment - Lifting motor: 1.1 kW - Stepless feed speed adjustment via inverter - Feed motor: 3 kW - Feed on Cardan shafts - Enclosed in a cabin - Extraction connector diameter: 4 x 130 mm - Dimensions (L/W/H): 3550 x 1750 x 1800 mm - Weight: approx. 3000 kg ADVANTAGES – With 4 heads – Ideal for wet and dry wood – DTR technical documentation – Used machine, in very good condition Net price: 65,900 PLN Net price: 15,690 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (price may change in case of significant exchange rate fluctuations)

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, 1. Strugarka/Profilarka Wysokoprędkościowa WACO MAXI, 8 głowic 8 wrzecion do rozcinania poziomego, prędkość posuwu 20-150 m/min Szerokość strugania robocza: 30-300 mm Wysokość strugania robocza: 10-150 mm Średnica okręgu tnącego: 180-260 mm Napięcie robocze: 400 V, 50 Hz Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW 1. Głowica dolna – 24,5 kW 2. Głowica górna – 30 kW 3. Głowica prawa boczna – 18,5 kW 4. Głowica lewa boczna – 30 kW 5. Głowica prawa boczna – 18,5 kW 6. Głowica lewa boczna – 24,5 kW Rozcinanie poziome: 7. Głowica prawa boczna – 53 kW 8. Głowica lewa boczna – 53 kW Ledpfey S R Agox Adljhg Maks. szerokość obrabianego elementu: 200 mm Maks. wysokość obrabianego elementu: 63 mm Maks. średnica piły: 300 – 400 mm Średnica wrzeciona: 50 mm Zakres regulacji pionowej: 10 mm Obroty wrzeciona: 5 500 obr./min Podłączenie do odpylania: 2 x Ø160 mm Długość jednostki: 1 300 mm 2. Strugarka/Profilarka Wysokoprędkościowa WACO MAXI, 3 głowice 3 wrzeciona do wykańczania, prędkość posuwu 30-300 m/min Główny silnik posuwu: 37 kW Przemiennik częstotliwości: 45 kW Prędkość posuwu, regulowana: 30-300 m/min 1. Głowica profilująca: 24,5 kW 2. Głowica górna: 24,5 kW 3. Głowica Rotaplan: 30 kW

Stanje: rabljeno, Leto izdelave: 2002, 5 postaj + 1 rezkalni agregat Numerično pozicioniranje Mazanje miz Lhsdpsy S Rkqjfx Adlog Zračne blazine v mizi Kapaciteta 230mm/120mm Skupna moč 43 kW 380V Opremljena s 4 spiralnimi držali za orodja s ploščicami Dokumentacija stroja in servisni ključi Stroj je obnovljen in na zalogi

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, delovna širina: 260 mm, višina skobljanja: 170 mm, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 170 mm, moč pogonskega motorja podajalnika: 4.000 W, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 6.000 obr/min, Oprema: kabina, motorna zavora, Weinig Profimat 23 E Delovna širina: 260 mm, Delovna višina: 170 mm, 5 vreten, Premer vretena: 40 mm, Razporeditev vreten: 1- Spodaj - 5,5 kW 2- Desno + 3- Levo - 11 kW 4- Zgoraj - 5,5 kW 5- Spodaj - 11 kW Pomik: 6 – 24 m/min - 4 kW Lhsdjy S E Spspfx Adleg Zračni jastuk v mizi En pogonski valj v mizi pri izhodu. Z orodjem.

Stanje: rabljeno, Profiling machine by Weinig, model PFA17N, ribbed table, 8 spindles (bottom 4 kW, right 4 kW, left 5.5 kW, right 4 kW, top 5 kW, bottom 4 kW, universal 4 kW, universal 4 kW), used. Lhedjy S Acxjpfx Adljg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Štiristranski skobeljni stroj SCM Superset XL Delovna širina: 15-230 mm Delovna višina: 6-120 mm Število vreten: 6 Razporeditev vreten: Spodaj Desno Lhedsy Sr Nnopfx Adljg Levo Zgoraj Spodaj Univerzalno/žaga za okenske letev Obratovalna hitrost vreten: 6000 obr/min Pnevmatski pritiski Pomik nastavljiv s frekvenčnim pretvornikom: 5-25 m/min Pogonski prenos z kardansko gredjo CE certifikat

Stanje: rabljeno, Number of spindles: 6 pcs Working width: 230 mm Planing height: 120 mm Infeed table length: 2500 mm Feed motor: 3 kW Feed speed: 5-24 m/min Dimensions (L/W/H): 3900 x 2200 x 2000 mm Lodpfey Spvrsx Adlshg Machine weight approx.: 2500 kg Weinig four-side planer Profimat 23, window version with glazing bead separation or can be used as rebate spindle ATS control and program control Technical Data Summary (additional included accessories on request) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs > Infeed table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5-24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle arrangement ----- > Spindle 1: bottom > Spindle 2: right, pneumatically controlled up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glazing bead saw, pneumatically up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glazing bead saw 2.2 kW, 6000 rpm, 40 mm diameter Further features ----- > Glazing bead separation or can be used as rebate tool > ATS control, automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package, combined control of the right spindle and glazing bead discharge via manual selector switch on control panel > Spindles with mechanical digital display ----- Price of the above machine upon request! ----- Option: Used planing heads ----- (Technical specifications per manufacturer information – without guarantee!)

Stanje: rabljeno, Leto izdelave: 2013, Number of spindles: 5 units Working width: 20 - 230 mm Planing height: 8 - 120 mm Infeed table length: 2500 mm Feed motor: 1.1 kW Feed speed, infinitely variable: 2–12 m/min Machine weight: approx. 2500 kg 1 WEINIG Planing and Profiling Machine VARIOMAT Short summary: ----- - 5 spindles - powerful motors - cycle-controlled jointing - MemoryPlus control unit - Option: Stähle-Hess Saturn single piece wood sanding machine Technical Manufacturer's Description: ----- Working width: 20–230 mm Working height: 8–120 mm 1st spindle horizontal lower ----- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–145 mm Lhsdpfxey Spvfe Adljg Axial adjustment: 5 mm Rabbetting device incl. rabbet cutter 2nd spindle vertical right ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 93–232 mm Minimum tool diameter at fence level: 93 mm Maximum tool diameter behind fence level: 180 mm Maximum profiling depth: 45 mm Axial adjustment: 30 mm Insert segment, incl. additional stop lip 125 mm Insert segment, incl. additional stop lip 150 mm 3rd spindle vertical left ----- Shared motor with 1st right spindle Diameter: 40 mm Shared speed with right spindle Tool cutting circle: 93–232 mm Maximum profiling depth: 45 mm Minimum profiling depth with tool circle 200 mm: 20 mm Axial adjustment below table: 30 mm Insert segment 125 mm Insert segment 150 mm 4th spindle horizontal upper ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum profiling depth: 30 mm Minimum profiling depth with tool circle up to 200 mm: 20 mm Axial adjustment: 30 mm 5th spindle horizontal lower ----- Motor with brake: 11.0 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125–200 mm Maximum profiling depth: 15 mm Axial adjustment: 10 mm Table plates for wood inserts on lower spindle Additional discharge plate above the lower spindle for wood insertion Feed system ----- Frequency-controlled feed 1.1 kW, infinitely variable 2–12 m/min Double pendulum opposite left spindle Adjustment path of feed rollers opposite left spindle, axial 35 mm Durofer spiked feed rollers Pneumatic pressure for feed rollers incl. water separator Cycle-controlled jointing to support manual jointing. The infeed roller is released after the second feed roller has engaged the workpiece. After the workpiece leaves the second feed roller, the infeed roller returns to the start position for the next workpiece. Further features: ----- MemorPLUS control Width and height controlled (spindles 3 and 4 radially CNC-axis controlled) ----- Price of the above machine on request! ----- OPTION at extra cost Stähle-Hess Saturn #7008: Machine was used in conjunction with Stähle-Hess Saturn Duo single piece wood sanding machine, stock no. #7008 (Technical data according to manufacturer – no guarantee!)

Stanje: rabljeno, Number of spindles: 5 pcs Working width: 230 mm Planing height: 120 mm Planer table length: 2500 mm Feed motor: 4 kW Feed speed: 5-30 m/min Control: Memory function Weinig Powermat 500 with grooving table ----- Machine will arrive in stock, cleaned, and fully inspected. Short summary: ----- - 5 spindles - 8,000 rpm - Grooving guide for short or difficult-to-guide workpieces, coated with Marathon PowerCoating - One driven roller on the outfeed table, hardened: 210 mm wide - Left and top spindle electronically controlled for width and height - Quick-release spindle nut Detailed description: ----- Technical data: Working width: 20-230 mm Working height: 8-120 mm Number of spindles: 5 1st spindle – bottom ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 125 - 180 mm Tool diameter rebate cutter: 130 - 160 mm Axial adjustment: 17 mm Rebate attachment MarathonCoating on table insert before 1st bottom tool holder 2nd spindle – right ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 200 mm Max. profiling depth: 35 mm Axial adjustment: 80 mm Radial adjustment: — Min. tool diameter at fence level: 93 mm Max. tool diameter behind fence level: 200 mm 3rd spindle – left ----- Motor with brake: 7.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 200 mm Tool diameter for straight knife heads max.: 163 mm Max. profiling depth: 35 mm Axial adjustment: 55 mm Pressure shoe before left spindle, including 2 spring-loaded lateral pressure rollers Spindle radial CNC-controlled 4th spindle – top ----- Motor with brake: 11.0 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 200 mm Tool diameter for straight knife heads max.: 180 mm Max. profiling depth: 35 mm Axial adjustment: 40 mm Spindle radial CNC-controlled Split pressure shoe in front of top tool holder, adjustable to tool diameter and can be swung away from the tool, spring-loaded 5th spindle – bottom ----- Motor with brake: 5.5 kW Spindle diameter: 40 mm Speed: 8,000 rpm Tool diameter: 93 - 225 mm Max. profiling depth: 15 mm Axial adjustment: 35 mm Radial adjustment: — Min. tool diameter at table level: 93 mm Max. tool diameter 6 mm below table level: 225 mm Feed system ----- Frequency-controlled feed, infinitely variable with brake: 4 kW, 5 - 30 m/min Infeed roller before 1st bottom tool pneumatically controlled up/down Lhedpfxoy Spu Ue Adlog Durofer pointed tooth rollers with depth limiter and self-cleaning Axial adjustment of feed rollers relative to left tool holder, 35 mm Reduced roller spacing relative to right tool Machine electrics ----- Operating voltage: 400 V (voltage range 380 - 420 volt), 50 Hz Machine base, tables and fences ----- Planer table: 2500 mm long (including straightening rule)...

Stanje: zelo dobro (rabljeno), Catalogue number: 7640 FEATURES – The best wide planer for both wet and dry wood – Ideal for processing logs, flooring boards, etc. – 2 planing shafts + 3 spindles – Manufactured by German brand KUPFERMUHLE – Used planer in very good condition TECHNICAL DATA - Max planing width: 610 mm Lhodpfxjy Sny As Adljg - Max planing height: 200 mm - Top section: - Geared infeed roller - Kickback fingers - Pressure beam - 2 geared feed rollers - Pressure beam - Planing shaft: 610 mm, 6 knives, 15 kW - Pressure beams - Outfeed smooth feed roller - Bottom section: - Side pressure at infeed - Guide rail - Infeed table - Geared feed roller - Planing shaft: 610 mm, 6 knives, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear section: - 2 side spindles + pressure systems: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW (electronically adjustable left/right) - Spindle diameter: 40 mm - Spindles adjustable alternately - Spindles adjustable up/down, left/right 3) Additional lower horizontal spindle 160 mm, adjustable up/down + left/right, 5.5 kW - Spindle diameter: 35 mm - Outfeed: 2 upper metal idler rollers, 2 lower rubber-driven rollers - Adjustable rollers in lower table - Electric adjustment of planing height - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120 mm, 2×160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Net price: 15,920 EUR (subject to 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Stanje: dober (rabljeno), Leto izdelave: 1990, Funkcionalnost: popolnoma funkcionalen, delovna širina: 250 mm, višina skobljanja: 125 mm, premer vretena: 35 mm, Štiristranski skobeljni stroj GUILLIET s širino mize 250 mm, okrepljeni motorji, dolg delovni pult. Lodpfxjy Sk Ayo Adlshg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Weinig H1000 stroj za profiliranje z mehanizacijo podajanja E3 in izmeta A3 Weinig Hydromat 1000 s 5 vreteni (leto 2012) Ločen električni razdelilnik Ločena daljinska kontrolna plošča Avtomatski sistem mazanja drsnih površin Spominski sistem Popolno zvočno ohišje Lhodsy Sgzxopfx Adljg Podajalnik Weinig E3 za stroj za profiliranje + paketne škarjaste dvigalo (3000 kg) Izmetalni sistem Weinig A3 s spustno konzolo + paketne škarjaste dvigalo (3000 kg) + paketni izmetalni verižni transporter WEINIG HYDROMAT 1000 Največja dimenzija 230x160 mm Št. 1: 7,5 kW – spodaj, 6000 obr/min + zunanji ležaj + ravni nastavljivi nož Št. 2: 7,5 kW – desno, 6000 obr/min + profilni nastavljivi nož Št. 3: 7,5 kW – levo, 6000 obr/min + profilni nastavljivi nož Št. 4: 7,5 kW – zgoraj, 6000 obr/min + zunanji ležaj + ravni nastavljivi nož Št. 5: 7,5 kW – spodaj, 6000 obr/min + zunanji ležaj + ravni nastavljivi nož 50 mm vretena Pomik: 0,55 kW Popolna dokumentacija priložena. Sesalni priključek priložen. MOŽEN NAKUP SAMOSTOJNO LE PROFILERJA ALI MEHANIZACIJE PO POTREBI.

Stanje: dober (rabljeno), Weinig Hydromat H23, 8-vretenčna 50 mm vreteni, 6.000 min⁻¹ Spodnje vreteno 7,5 kW, pripravljeno za robljenje Desno vreteno 7,5 kW, pripravljeno za vzdolžno robljenje Levo vreteno 15 kW, pripravljeno za vzdolžno in profilno robljenje Lhodpoy Sgy Uofx Adleg Desno vreteno 11 kW, pripravljeno za profilno robljenje Zgornje vreteno 15 kW, pripravljeno za robljenje Spodnje vreteno 18,5 kW, pripravljeno za robljenje Zgornje vreteno 11 kW, pripravljeno za vzdolžno in profilno robljenje, z zunanjim ležajem Spodnje vreteno 7,5 kW, pripravljeno za vzdolžno in profilno robljenje, z zunanjim ležajem Pogon podajalnika 7,5 kW Avtomatski sistem za mazanje Popolna težka zvočna zaščitna kabina Možnost dobave z dovodom in odvodom za štiristranski skobeljni stroj po potrebi. Možna dobava orodja po potrebi.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, premer vretena: 40 mm, širina skobljanja: 260 mm, delovna višina: 160 mm, hitrost vretena (min.): 7.000 obr/min, Wenig Powermat 700 6 vreten 260 mm široko 160 mm visoko 40 mm premer vretena 7.000 vrt./min Hitrost podajanja 5–40 m/min Spodnji motor 11,0 kW Desni + levi kombinirani motor 11,0 kW Lhsdpfx Adoy R U Sioleg Zgornji motor 11,0 kW Zgornji motor 7,5 kW Spodnji motor 7,5 kW Radialno CNC-krmiljena nastavitev in pozicioniranje levega in zgornjega vretena Marathon prevleka za strojne mize in vodila (razen podajalne mize) Podajalna miza 2,5 m Operacijski sistem Memory-Plus

Stanje: zelo dobro (rabljeno), CATALOG NUMBER: 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Horizontal bottom, 250 mm, 5.5 kW 2) Vertical right, 170 mm, 5.5 kW 3) Vertical left, 170 mm, 5.5 kW 4) Horizontal top, 250 mm, 7.5 kW 5) Horizontal bottom, 250 mm, 7.5 kW 6) Universal, 250 mm, 360° adjustable, 5.5 kW - 6th spindle: electric height adjustment (up/down) - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top side: 6 geared infeed rollers (including 2 double rollers) - Top side: 6 rubber-coated outfeed rollers (including 2 double rollers) - Top side: 2 pressure elements - Bottom side: geared, driven, swiveling infeed roller mounted before first spindle - Bottom side: 2 metal, smooth, driven outfeed rollers - Bottom side: 4 side pressure units - Feed on Cardan shafts - Pneumatic roller pressure - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness setting - Body lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2,180 mm - Extraction port diameter: 6 × 150 mm - Dimensions (L×W×H): 5,000 × 1,800 × 1,900 mm - Weight: approx. 4,600 kg ADVANTAGES – Made in Italy Lodpsy Rzkfefx Adlshg – 6-head construction – DTR documentation + CE certificate – Ideal for wet and dry wood – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may vary with significant exchange rate fluctuations)

Stanje: zelo dobro (rabljeno), Catalogue No. 6765 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 160 mm Number of spindles: 4: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, electrically adjustable left/right from the control panel, 5.5 kW 4) Top horizontal, 230 mm, electrically adjustable up/down from the control panel, 7.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm Top side: - Infeed traction rollers, toothed, 6 pcs (including 2 double) - Outfeed traction rollers, rubber, 2 pcs Bottom side: - Infeed metal toothed traction roller, swivelling in lower table - Outfeed smooth metal traction roller - Pneumatically adjustable rollers Lhjdpfx Ajy Rzgyjdlog - Infeed table length (with pneumatic feeder): 3390 mm - Option to operate without activating the pneumatic feeder, table height adjustable - Central lubrication - Electric thickness adjustment - Stepless feed speed regulation - Feed via Cardan shaft - Feed motor: 4 kW - Enclosed in safety cabin - Extraction port diameter: 4 x 120 mm - Dimensions (L x W x H): 7000 x 1950 x 1700 mm - Weight: approx. 3000 kg – Suitable for wet and dry wood – Pneumatic feeder on the infeed table – Used planer, very good condition Net price: 83,900 PLN Net price: 19,980 EUR Net price calculated at exchange rate 4.2 PLN/EUR (Significant exchange rate fluctuations may affect the final price)

Stanje: zelo dobro (rabljeno), CATALOG NUMBER: 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal: 240 mm, 5.5 kW 2) Right vertical: 160 mm, 5.5 kW 3) Left vertical: 160 mm, 5.5 kW 4) Top horizontal: 240 mm, 7.5 kW - All heads adjustable up/down, right/left - Spindle diameter: 40 mm – From the top: - 6 feed-in drive rollers, toothed (including 2 double rollers) - 2 feed-out drive rollers, rubber, smooth – From the bottom: - Side pressure before and after the roller in the lower table - Feed-in toothed, driven, swiveling roller before the first spindle in the lower table - 2 pneumatic side pressures - Feed-out driven roller, metal, smooth - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable up/down - Central lubrication - Electric thickness setting - Lifting motor: 0.75 kW - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 3 kW - Feed on cardan shafts - Fully enclosed in soundproof cabin - Extraction port diameters: 4 x 150 mm - Dimensions (L/W/H): 3750 x 1750 x 1800 mm - Weight: 3300 kg Ledpfxoy Rzf Ne Adlohg ADVANTAGES – 4-head configuration – Ideal for both wet and dry wood – Second-hand machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (depending on rate 4.2 EUR) (Prices may change with larger exchange rate fluctuations)