Snoeck-co

Stanje: rabljeno, Leto izdelave: 1996, Funkcionalnost: popolnoma funkcionalen, Oprema: CE označba, Wide belt sander with a working width of 1300 mm. In good condition. Godpfswptrrsx Agwoip

Stanje: dober (rabljeno), Koda: 0424 Znamka: DMC - ITALY Model: EUROPA 120 Avtomatski brusilni stroj z dvema trakovoma za kalibracijo lesa, pohištva, notranje opreme, lesenih okvirjev, vrat, plošč, kompozitnih materialov in različnih drugih materialov. Tehnični podatki: Giodpfx Aov A Ta Degwjp - Masivna konstrukcija - Maksimalna delovna širina: 1200 mm - Maksimalna delovna višina: 170 mm - Dimenzije brusnega traku: 2200 x 1250 mm - 1. sklop: Gumirani kalibracijski valj, premer 220 mm, nastavljiva prijemala za pritisk obdelovanca, moč motorja 20 KM - 2. sklop: Finišni segment z nastavljivim pritiskom, moč motorja 10 KM - Puhala za čiščenje brusnega traku - Regulator hitrosti pomika traku: 3,5 – 17,5 m/min - Vakuumska miza, moč motorja 7,5 KM - Avtomatsko dvigovanje mize - Avtomatsko pozicioniranje mize - 2 odsesovalna priključka, premer 200 mm - Delovni tlak: 7 bar - Skupne dimenzije: 1900 x 1800 x 2100 mm (V x Š x G) - Teža: 2500 kg

Stanje: novo, Leto izdelave: 2025, Dimensions (L x W x H) 4630 x 3005 x 2334 mm Gsdpfxev A Hftj Agwoip Weight 12,160 kg Total power requirement 135.6 kW Sanding Line SANDOMAT SFR-R-P1300+SUR-R1300 - Working width: 1300 mm - Min. workpiece length: 465 mm - Min./Max. pass-through height: 3–100 mm - Total connected load: 71.8 kW - Infinitely variable feed speed: 4–28 m/min - Motor power, first sanding unit: 30 kW - Motor power, second sanding unit: 22 kW - Motor power, third sanding unit: 15 kW - Feed motor: 3.7 kW - Height adjustment motor: 0.55 kW - Dust extraction brush motor: 0.55 kW - Hardness of first sanding roller: 80 sh - Hardness of second sanding roller: 50 sh - Hardness of third sanding roller: sanding shoe - Diameter of first sanding roller: 255 mm - Diameter of second sanding roller: 255 mm - Diameter of third sanding roller: sanding shoe - Sanding belt speed, first belt: 21 m/s - Sanding belt speed, second belt: 14.5 m/s - Sanding belt speed, third belt: 11 m/s - Sanding belt size: 1320 x 2000 mm - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9,200 m³/h - Voltage: 400 V / 50 Hz - Dimensions: L = 2100, W = 3005, H = 2334 mm - Weight: 6,390 kg SANDOMAT SUR-R1300 Technical Specifications: - Working width: 1300 mm - Min. workpiece length: 390 mm - Min./Max. pass-through height: 10–100 mm - Total connected load: 63.8 kW - Infinitely variable feed speed: 5–32 m/min - Motor power, first sanding unit: 37 kW - Motor power, second sanding unit: 22 kW - Feed motor: 3.7 kW - Height adjustment motor: 0.55 kW - Dust extraction brush motor: 0.55 kW - Hardness of first sanding roller: 80 sh - Hardness of second sanding roller: 70 sh - Diameter of first sanding roller: 255 mm - Diameter of second sanding roller: 255 mm - Sanding belt speed, first belt: 21 m/s - Sanding belt speed, second belt: 18 m/s - Sanding belt size: 1320 x 2400 mm - Compressed air connection: 6 bar - Air consumption: 17 m³/h - Extraction capacity: 9,500 m³/h - Voltage: 400 V / 50 Hz - Dimensions: L = 2530, W = 2170, H = 2290 mm - Weight: 5,770 kg

Stanje: novo, - NEW - GENERAL FEATURES: Machine Frame and Work Table * Steel structure with electrical control cabinet located at the front of the machine * Sanding belts inserted from the left side of the machine * Motorized table height adjustment * Main motor integrated into the machine frame Electrical Equipment * Electromechanical control panel on the left front side of the machine * Automatic star-delta starter for the main motor * Motor protection switches for the motors * Motors with insulation class IP 54 Emergency and Safety Devices * Safety microswitch for thickness limit exceedance * Automatic brake for immediate stop of the aggregates * Emergency stop bar at the workpiece infeed * Mushroom emergency stop buttons at workpiece infeed and outfeed * Lockable main switch * Automatic emergency shutdown of the machine in case of: - Sanding belt breakage - Unsufficiently tensioned sanding belt - Lateral deviation of the sanding belt - Lack of compressed air Gedpfx Asvwfrnogwoip - Main motor overload Note: The standard version with 400 Volt 50 Hz requires a three-phase mains supply + neutral wire + earth wire. If the 400 Volt power supply has no neutral wire, a single-phase transformer from the price list must be ordered. The same transformer must also be ordered for machines with voltage higher than 400 Volts, regardless of whether a neutral wire is present. The version of the machine with 220 or 230 Volts (50 or 60 Hz) is available at a surcharge (see price list). STANDARD BASIC MACHINE EQUIPMENT - R140/85 rubber-coated calibration roller, diameter 140 mm, 85 Sh - 1st position - R160/45 rubber-coated sanding roller, diameter 160 mm, 45 Sh - 2nd position - Hard sanding pad with manual working height adjustment - Main motor 11 kW (15 HP) - Electronic ammeter for the main motor to display current consumption - Electronic display for working height - Electronically controlled sanding belt oscillation - Rubber pressure rollers - Kickback protection at infeed before the first aggregate - Rubber feed belt 60 Sh - Roller table with two rollers at infeed and outfeed of the work table - Feed belt with two speeds 4.5 / 9 m/min with geared motor - Automatic belt centering Working width mm 1,100 Min./Max. working height mm 4 - 170 Sanding belt width mm 1,115 Sanding belt length mm 2,150 Main motor output kW (HP) 11 (15) Geared motor kW (HP) 0.45/0.8 (0.6/1.1) Feed speed m/min 4.5/9 Consisting of: 10.90.87 European safety standards (C.E. mark) 93.07.31 Volt 400 EU 93.12.01 Frequency 50 Hz 44.44.19 Version "B" for RCS 33.31.50 Roller table at infeed and outfeed for long workpieces 62.44.50 10-inch control panel with "eye-S" software integration 31.21.60 "RA" helical-grooved steel contact roller - 1st aggregate 97.50.71 Main motor 15 kW (20 HP)

Stanje: rabljeno, Leto izdelave: 2000, Working width: .- mm Gsdpfxsvwfl Uo Agwoip Equipped with 1 sanding unit consisting of: - Combination unit with electronic pad for lacquer sanding - Lacquer sanding - Dust brush - Roller table at infeed, 270 mm - Electronic programmable control for 50 programs Machine overhauled with brand new feed belt Valves and pressure regulators replaced Machine fully set up, Test sanding performed Used Make: Bütfering Model: Classic 111 C Year of manufacture: 2000 Machine no.: 63608 Working width: 1100 mm Pass-through height: 160 mm CE type-certified GS wood dust tested Abrasive belt dimensions: 1120 mm x 1900 mm Feed speed: 4 + 8 m/min 1 combination unit 3.7/7.5+15 kW, 3 belt speeds with automatic adjustment via controller Steel roller Diameter: 130 mm Belt speed approx. 4.5 + 9 + 18 m/s Electronic segmented pad Segment division: 50 mm workpiece-controlled lacquer sanding Location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without guarantee or warranty

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna širina: 2.000 mm, skupna višina: 2.200 mm, skupna dolžina: 1.900 mm, delovna širina: 1.300 mm, širina brušenja: 1.300 mm, skupna masa: 3.200 kg, vrsta nastavitve višine: električni, širina mize: 1.300 mm, vhodna napetost: 400 V, transportna dolžina: 2.100 mm, transportna višina: 2.200 mm, transportna širina: 2.000 mm, A high-performance wide belt sander designed for processing wood-based panels, solid wood, plastics, and metal. Suitable for both rough and fine sanding operations, it ensures excellent surface quality and delivers stable, repeatable results. The machine is equipped with two independently controlled sanding belt units, allowing the simultaneous use of two different grit types. Each sanding belt features individual speed adjustment to effectively prevent scratching, overheating, and abrasive clogging. The conveyor table, in combination with precise height adjustment, enables the sanding of materials up to 100 mm thick. Material thickness adjustment is performed via a control panel with digital display, ensuring high accuracy and user-friendly operation. Each sanding drum comes with stepless speed adjustment via frequency inverter and sensors for belt tracking control. These systems prevent lateral belt drift and automatically stop the machine in case of deviation, protecting both the machine and the workpiece. The sander is fitted with a central extraction system and can be connected to industrial extraction units or vacuum systems via Ø100 mm extraction ports. Additionally, each sanding belt features a pneumatic belt cleaning system that continuously removes sanding dust during operation. Changing sanding belts is quick and easy – by releasing a single tensioning device, the belt can be removed. The machine is compatible with standard sanding belts joined with adhesive tape; no special or proprietary abrasives are required. Key Features: • Working width: 1300 mm • Two independently controlled sanding belt units • Simultaneous use of two different abrasive grits • Stepless speed adjustment for each sanding belt (frequency inverter) • Sanding capacity up to 100 mm material thickness • Conveyor table with height adjustment • Digital control panel • Pneumatic belt system for tension regulation • Pneumatic belt cleaning system • Ø100 mm extraction ports • Fast and simple belt changes • Semi-automatic operation Gjdpfsmrqlnox Agweip Machine condition: The machine is in excellent condition, having only been used briefly for demonstration purposes.