Lugauer GesmbH

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, Krmiljenje: Emco Easycycle Delovno območje Pomik v osi X: 450 mm Pomik v osi Y: 400 mm Pomik v osi Z: 350 mm Miza Vpenjalna površina (D x Š): 800 x 400 mm Največja obremenitev mize: 300 kg Vreteno Obseg vrtljajev (brezstopenjsko): 10 – 5.000 min-1 Razdalja do površine mize: 40 – 440 mm Vpenjanje orodja: SK 40 Hod pinole: 80 mm Zasukljiv vertikalni rezkalni glava: +/- 90° Pomik Območje pomika: 10 – 5.000 mm/min Hitri pomik v osi X/Y/Z: 2000 / 5000 mm/min Pomikalna sila X/Y/Z: 10 / 10 / 15 kN Dimenzije Dimenzije (D x Š x V): 1980 x 2030 x 1990 mm Teža stroja: 2270 kg Nedpeyvrkasfx Advocp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, potovalna razdalja osi X: 450 mm, pomik osi Y: 300 mm, pomik po osi Z: 350 mm, največja hitrost vretena: 2.500 obr/min, poteza s peresom: 100 mm, Na prodaj je Emco-jev rezkalni stroj tipa FB-4. Stroj je bil prej uporabljen izključno v okviru medpodjetniškega usposabljanja. Trenutno sta na zalogi še dva enaka stroja Emco FB-4. Rezkalni stroj V/H Proizvajalec: Emco Tip: FB-4 Leto izdelave: 2005 Krmiljenje: prikazovalnik Heidenhain ND-760 Ncodpfoyvra Iex Advjp Tehnični podatki: ----- • Pomiki X-Y-Z: 450 x 300 x 350 mm • Vpenjalna površina: 800 x 400 mm • Držalo orodja: SK-40 • Vpenjanje orodja: hidravlično • Hod pinole: 100 mm • Glava rezkala nagibna ± 90° • Vreteno: 50 – 2.500 obr./min • Izbira števila obratov: 18 stopenj • Električna centralna mazalna naprava • Delovna svetilka • Hladilna naprava • Kabina z zaščito pred škropljenjem (zložljiva) • Teža: 1.550 kg • Dimenzije D x Š x V v mm: 1.485 x 1.500 x 1.700 mm Dodatna oprema: ----- • 4x nastavljive strojne noge • Navodila za uporabo • Kontra ležaj za horizontalno obdelavo • Gred za horizontalno obdelavo • Strojna zaščita mize (trenutno odstranjena) • 10x držalo orodja SK-40

Stanje: Okvarjen nosilec rezervnih delov (rabljen), Leto izdelave: 1987, Funkcionalnost: nefunkcionalno, številka stroja/vozila: 18369, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, hitrost pomika os X: 2 m/min, hitrost podajanja osi Y: 2 m/min, hitrost podajanja os Z: 2 m/min, hod vretena: 80 mm, hitro pomikanje X-os: 4 m/min, hitri pomik os Y: 4 m/min, hitri pomik na osi Z: 4 m/min, skupna višina: 2.000 mm, skupna širina: 2.200 mm, skupna dolžina: 2.200 mm, širina mize: 500 mm, dolžina mize: 500 mm, največja hitrost vrtenja: 6.300 obr/min, vrtljajska hitrost (min.): 25 obr/min, obremenitev mize: 2.500 kg, skupna masa: 2.200 kg, višina krmilne omare: 1.500 mm, dolžina elektro omare: 900 mm, širina krmilne omare: 800 mm, teža obdelovanca (maks.): 450 kg, vhodni tok: 22 A, For sale is a Deckel FP3NC tool milling machine with Dialog 4 control system. The machine is visually in decent used condition and comes complete with the Fibro NC rotary table NC-T 400. The machine is currently not operational and is therefore expressly being sold as a project for technicians, a source of spare parts, or for restoration. Known details: Manufacturer: Deckel Model: FP3NC Control: Dialog 4 Machine serial number: 2803-3369 Year of control (according to nameplate): 1987 Ncodpjyu Tn Aofx Advsp Operating voltage: 380 V, 3 phases, 50/60 Hz Rated current: 22 A Control voltage: 24 V Rotary table: Fibro NC-T 400 Rotary table year of manufacture: 1986 Fault / Condition: The machine displays error code 30. According to our current knowledge, the issue is likely caused by an empty battery on the circuit board. However, please note that this information is without guarantee, as no further technical inspection or repairs have been carried out. The machine is therefore explicitly being sold as defective. Ideal for: Refurbishers Electronics/CNC specialists Spare parts recovery Export Scope of delivery / includes: Deckel FP3NC machine Dialog 4 control Fibro NC rotary table NC-T 400 Available documentation / operator’s manual / electrical documentation as shown in the pictures Note: Sale is without warranty, guarantee, or return. Inspection is possible by appointment and is expressly encouraged. Loading can be handled by us.

Stanje: zelo dobro (rabljeno), potovalna razdalja osi X: 450 mm, pomik osi Y: 400 mm, pomik po osi Z: 350 mm, hitrost pomika os X: 5.000 m/min, hitrost podajanja osi Y: 5.000 m/min, hitrost podajanja os Z: 5.000 m/min, skupna višina: 2.200 mm, skupna širina: 2.300 mm, skupna dolžina: 1.990 mm, širina mize: 400 mm, dolžina mize: 800 mm, vrtljajska hitrost (min.): 5.000 obr/min, obremenitev mize: 300 kg, skupna masa: 2.200 kg, Universal milling machine with toolmaker's precision Small batch production up to complex workpieces Vertical milling head with hydraulic tool clamping, Y and Z milling axes Handwheels on all three axes Linear guides on all three axes Retractable work area cover with large chip guard Main motor with spindle brake X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Table load capacity: 300 kg Nodpfx Adeyucc Novecp Feed rate X-axis: 5,000 mm/min Feed rate Y-axis: 5,000 mm/min Feed rate Z-axis: 5,000 mm/min Tool holder: 40 ISO/BT/MK Spindle power: 10 kW Spindle speed: 5,000 rpm Length: 1,990 mm Width: 2,300 mm Height: 2,220 mm Weight: 2,200 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. As such, it does not constitute representation or contractual terms. We recommend verifying all key details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, potovalna razdalja osi X: 450 mm, pomik osi Y: 400 mm, pomik po osi Z: 350 mm, hitrost pomika os X: 5.000 m/min, hitrost podajanja osi Y: 5.000 m/min, hitrost podajanja os Z: 5.000 m/min, skupna višina: 2.220 mm, skupna širina: 2.300 mm, skupna dolžina: 1.990 mm, širina mize: 400 mm, dolžina mize: 800 mm, obremenitev mize: 300 kg, skupna masa: 2.200 kg, Universal milling machine with toolmaker's precision Suitable for small batch production up to complex workpieces Vertical milling head with hydraulic tool clamping Milling in Y and Z axes Handwheels on all three axes Linear guides on all three axes Retractable work area safety enclosure with large chip protection Main motor with spindle brake Ncodpfx Asyub Udedvsp X-axis travel: 450 mm Y-axis travel: 400 mm Z-axis travel: 350 mm Table length: 800 mm Table width: 400 mm Table load: 300 kg Feed X-axis: 5,000 mm/min Feed Y-axis: 5,000 mm/min Feed Z-axis: 5,000 mm/min Tool holder: ISO 40 / BT / MK Spindle power: 10 kW Speed: 5,000 rpm Length: 1,990 mm Width: 2,300 mm Height: 2,220 mm Weight: 2,200 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, they do not constitute representations or contractual terms. We recommend verifying all important details.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2009, obratovalne ure: 2.542 h, Funkcionalnost: popolnoma funkcionalen, Kunzmann WF 4/3 Milling Machine TNC 320 Manufacturer: Kunzmann Model: WF 4/3 Milling Machine Year of manufacture: 2009 Condition: Used, from training workshop, cleaned and powered, ready for demonstration Spindle hours: 2,542 h X travel: 400 mm Y travel: 350 mm Z travel: 400 mm Tool holder: SK 40 Spindle speeds: 1,000 – 4,500 rpm Feed rates: 0 – 2,000 mm/min Quill travel: 60.0 mm Ncodpfeyub H Tex Advjp Table size: 650 x 350 mm T-slots: 14 H7 Control system: TNC 320 Motor power: 5.5 kW Weight: 1,920 kg Space requirements: approx. 2,000 x 2,000 x 2,100 mm Total power requirement: approx. 7 kVA Central lubrication Coolant system CE compliant Scope of delivery: – Technical documentation – Full safety cabin – LED machine light

Stanje: dober (rabljeno), Leto izdelave: 1986, Milling Machine Deckel FP3NC Nsdpfoyub Epex Advecp Manufacturer: Deckel Model: FP3NC Year of manufacture: 1986 Control: Dialog 4 Condition: Used Travel (X/Y/Z): 400 / 400 / 400 mm Quill stroke: 80 mm Spindle speed: 40 rpm to 3600 rpm Swiveling milling head Hydraulic tool clamping Vertical/Horizontal SK40 Electronic handwheel Control panel for tool change and program start Documentation Lamp Coolant system Full enclosure NC T400 rotary table Weight: approx. 2000 kg Electrical cabinet weight: 300 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1083252, Specifikacija stroja Velikost mize: 914 mm x 305 mm Pomik osi X: 406 mm Pomik osi Y: 305 mm Pomik osi Z: 254 mm Vreteno: BT 40 Hitrosti vretena: 0-10.000 obr/min Ncodpfjyt Hknox Advop Motor vretena: 11,25 kW Hitri pomik: 30,5 m/min Kapaciteta menjalca orodij: 10 orodij Približna teža: 1542 kg Stroj je opremljen z: 4. osjo HRT 160 Hitro vrezovanje navojev Sistem za hlajenje Osvetlitev Zaščitni pokrovi

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Machine is located in the showroom. Optimill F 80 CNC milling machine, directly from the manufacturer. F 80 CNC – The OPTIMUM CNC milling machine with Siemens SINUMERIK 808D control stands out thanks to its performance, speed, precision, and long service life. • Column-type machine frame made from cast iron for high rigidity • Carousel tool changer with 12 tool stations • All linear guides equipped with stainless steel covers • Automatic central lubrication • Siemens main spindle motor • Siemens servo drives on all axes (closed-loop control) • Maximum spindle speed of 10,000 rpm • Portable electronic handwheel with enabling switch and emergency stop facilitates program setup • Coolant system with 70-litre coolant tank • Tool change can be performed automatically or at the push of a button (electropneumatic tool clamping) • Massive, precise milling table – large dimensions and precision-machined surface • Large access doors to minimize cleaning and maintenance time • LED machine light for full illumination of the work area SINUMERIK 808 ADVANCED Compact and robust Communicative • Front USB panel (IP65) • Serial interface RS232C • RJ45 Ethernet at the rear User-friendly • Technology-specific keyboard layout • Hard keys with protective membrane Process-safe • LED tool number display • MCP with rotary switch for feed and spindle override Comprehensive package • RJ45 Ethernet port • Prepared for remote maintenance • AST function; enables easy optimization for higher dynamic and accuracy requirements • Absolute encoder / no homing sequence required • Higher accuracy Dimensions and weights Length approx. 1995 mm Width/depth approx. 1930 mm Height approx. 1640 mm Weight approx. 2300 kg Rapid traverse speed X axis 20 m/min Y axis 20 m/min Z axis 20 m/min Electrical data Connected voltage 400 V Line frequency 50 Hz Total power requirement 12 kVA Milling table (horizontal) Length 800 mm Width 260 mm Distance vertical spindle – table min. 100 mm Distance vertical spindle – table max. 550 mm T-slot size 16 mm Number of T-slots 5 T-slot spacing 50 mm Max. load capacity 200 kg Precision Repeatability ± 0.01 mm Positioning accuracy ± 0.01 mm Ncjdpfsymkcuox Advep Coolant system Coolant pump motor power 450 W Tank capacity 80 l Pneumatic connection Operating pressure 7 bar Traverse paths X axis (automatic) 450 mm Y axis (automatic) 260 mm Z axis (automatic) 450 mm Distance spindle – column max. 370 mm Vertical spindle Spindle taper BT 40 Speed range 50 – 10,000 rpm Note on speed range: Maximum continuous spindle speed must be reduced by about 20% for continuous operation Drive motor rated power (S1) 3.7 kW Drive motor power (S6-30% duty) 5.5 kW Drive motor torque (S1) 24 Nm Drive motor torque (S6-30% duty) 36 Nm Feed motor torque X axis (S1) 6 Nm Y axis (S1) 6 Nm Z axis (S1) 11 Nm Tool changer Type: Carousel Number of tool stations: 12 tools Max. tool diameter: 95 mm Max. tool length: 300 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 7 s

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, EMCO C40 Linear Universal Milling Machine with Digital Display and Path Control – Excellent Condition, Tool Holders, CE-compliant!! Technical Specifications: - Year of manufacture: 2009 - Machine number: BA1GX1201 - Milling table clamping surface: 800 x 400 mm - T-slots: 8 - Slot width: 14 mm (H8) - Slot spacing: 50 mm - Maximum load: 300 kg - Infinitely variable spindle speed: 10 - 5000 rpm - Infinitely variable feed rate: 10 - 2000 mm/min - Rapid traverse X-axis: 5000 mm/min - Travel (X/Y/Z): 450 / 350 / 400 mm - Vertical and horizontal spindle: SK40 taper - Manual tool clamping system - Quill stroke: 80 mm - Weight: approx. 2000 kg - Dimensions (approx.): 2.5 x 2 x 2 m - Main drive motor: 7 kW - Spindle brake - Technical documentation, spare parts diagrams, operating manual - Swiveling machine enclosure - Coolant system - Machine lamp - Tool trolley with tool holders About the Machine: Nodpeyliffefx Advjcp A universal milling machine EMCO C40 Linear with path control is offered. This universal milling machine is in almost mint condition. It comes from a government facility where it was only lightly used. The control unit is very user-friendly. Converting from vertical to horizontal operation is straightforward, thanks to the swiveling vertical head. The EMCO has been mechanically and electrically inspected by us. Take advantage of the opportunity to view and test the machine under power at our site.

Stanje: dober (rabljeno), Številka zaloge: 3079 Blagovna znamka: DECKEL Leto izdelave: 1986 Številka stroja: 2204-0879 Tip: FP4 A Krmiljenje: Contour 2 Miza: 710 x 430 mm Obremenitev mize: 200 kg Pomiki osi x-y-z: 485 – 385 – 380 mm Hod pinole: 80 mm Vpenjalno mesto: SK40 Hitrost vrtenja: 63 do 3.150 min⁻¹ Pomik: 2 do 3.000 mm/min Hitropomik: 3.000 mm/min Oprema/dodatki: različni nosilci orodij (glej fotografijo) Nedpfx Asyk Rwtjdvocp Stanje: dobro Priključek: 7,5 / 9,5 kW Teža: 2 t Mere: 2.000 x 2.000 x 2.200 mm Mere električne omare: 800 x 800 x 1.150 mm

Stanje: rabljeno, Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Maschinen-Nr. F4UT3901, potovalna razdalja osi X: 700 mm, pomik osi Y: 500 mm, pomik po osi Z: 500 mm, poteza s peresom: 100 mm, hitro pomikanje X-os: 3 m/min, hitri pomik os Y: 3 m/min, hitri pomik na osi Z: 1 m/min, skupna višina: 2.120 mm, skupna širina: 2.115 mm, skupna dolžina: 2.220 mm, širina mize: 500 mm, dolžina mize: 900 mm, največja hitrost vrtenja: 3.150 obr/min, vrtljajska hitrost (min.): 63 obr/min, skupna masa: 2.550 kg, Oprema: dokumentacija / priročnik, V ponudbi je rezkalni stroj EMCO FB-6. Oprema: 2 hidravlični strojski primeži, premična omara z drsnimi vrati za rezkalna orodja vključno s 17 držali za rezkala, orodjarna z okoli 150 različnimi rezkali, omara s krilnimi vrati z različnimi rezkali. Izkoristite možnost ogleda stroja na lokaciji pod elektriko in se prepričajte o njegovem stanju. Ncedpfx Ajyka Rcsdvop

Stanje: dober (rabljeno), Leto izdelave: 1991, številka stroja/vozila: 60081, Univerzalni rezkalni stroj AVIA - FNF 32 Premiki X - 400 x Y - 340 x Z - 350 mm Velikost mize 800 x 400 mm Vreteniška glava ISO 40 Število vrtljajev 18 - od 63 do 3.150 obr/min Pomiki 18 stopenj od 10 do 500 mm/min Hitri pomik 1.600 mm/min Trosna digitalna merilna naprava Mitutoyo Centralno mazanje Hladilni sistem Električni podatki 400 V / 4 + 1,5 kW Potreben prostor D - 1.750 x Š - 1.700 x V - 2.000 mm Ncsdpfeyhbizjx Advep Teža cca 1.500 kg Dokumentacija na voljo

Stanje: rabljeno, X-pomik 850 mm Y-pomik 300 mm Z-pomik 450 mm Velikost mize 1100 x 250 mm Ncsdpfxjyfwyqs Advjp Krmiljenje konvencionalno Vpenjanje SK40 Območje vrtljajev 35,5 - 1800 obr/min Skupna priključna moč 5,0 kW Teža stroja ca. 1,25 t Mere D x Š x V 1,8 x 1,7 x 1,8 m Oprema: - Heidenhain digitalni prikaz - Neomejena nastavitev podajanja in vretena - Hladilna naprava - Zaščita proti ostružkom - Hidravlični primež - Dobro stanje - SK40 držala orodja in dodatki glej slike

Stanje: rabljeno, Leto izdelave: 2003, Rezkalni stroj DMG DMU 100 T, letnik 2003 Nedsx T A Tyepfx Advscp Več tehničnih podatkov in slik na zahtevo.

Stanje: rabljeno, Leto izdelave: 1969, x-premik 710 mm y-premik 250 mm z-premik 400 mm Velikost mize 1200 x 300 mm Upravljanje konvencionalno Vpenjalni stožec SK40 Nodpfx Aex I Sf Usdvjcp Območje vrtljajev 50 - 2500 min⁻¹ Potrebna skupna moč 2,2 kW Teža stroja ca. 1,7 t Mere D x Š x V 2,1 x 2,0 x 1,6 m Oprema: - Digitalni prikazovalnik - Sistem za hlajenje - Huron glava za rezkanje - Naprava za izklop v sili - Dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, Rabljeni rezkalni stroj Znamka: Macmom Nsdpfxex Ey R To Advjcp Tip: M100NC Leto izdelave: 1998

Stanje: rabljeno, X-pot 600 mm Y-pot 400 mm Ncedpfx Adsxwzcxovsp Z-pot 320 mm Velikost mize 900 x 420 mm Upravljanje konvencionalno Vpenjanje SK40 Območje vrtljajev 35,5 - 1800 min⁻¹ Hod pinole da mm Skupna potrebna moč 5,0 kW Teža stroja ca. 1,45 t Dimenzije D x Š x V 1,6 x 1,2 x 1,9 m Oprema: - Digitalni prikaz - Hladilni sistem - Rezkalna glava s pinolo

Stanje: rabljeno, X-hod 450 mm Y-hod 400 mm Z-hod 400 mm Krmilnik Heidenhain TNC 355 Območje vrtljajev 40 - 4000 U/min 21 stopenj vrtljajev Vpenjalo orodja ISO 40 Hod pinole 90 mm Hitrost podajanja 2-3000 mm/min Hitri pomik vzdolž in prečno 6000 m/min Hitri pomik Z-os 5000 m/min Razdalja med vretenom in mizo 450 mm Pomik mize 495 mm Navpična površina mize 300 x 450 mm Vpenjalna miza, fiksna 460 x 800 mm Maksimalna obremenitev 350 kp Dimenzije pribl. 3150 x 1800 x 2125 mm Teža s paletnim sistemom pribl. 2380 kg Teža stroja pribl. 2,4 t Vključno različna držala ISO 40 Navodila za uporabo na voljo Ncodpfsxv D U Ijx Advsp

Stanje: rabljeno, Leto izdelave: 1984, x-hod 410 mm y-hod 310 mm z-hod 400 mm Velikost mize 700 x 280 mm Krmilnik Heidenhain TNC 145 Priključek SK40 Območje vrtljajev 40-2.000 min⁻¹ Hitrost hitrega pomika 1,5 m/min Podajalna hitrost 1500 mm/min Pogonska moč 2,2 kW Hod vretena 63 mm Teža 1,3 t Skupna potrebna moč 2,2 kW Teža stroja pribl. 1,5 t Dimenzije D x Š x V 1,4 x 2,1 x 2,0 m Oprema: - Nov TFT zaslon - Hladilni sistem - Hidravlično vpenjanje orodja Ncjdpexlufpsfx Advop - Rezkalna glava z vretenom - Dokumentacija

Stanje: dober (rabljeno), Leto izdelave: 1985, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2803-2693, potovalna razdalja osi X: 400 mm, pomik osi Y: 400 mm, pomik po osi Z: 400 mm, največja hitrost vretena: 6.300 obr/min, hitrost vretena (min.): 32 obr/min, poteza s peresom: 80 mm, hod vretena: 80 mm, vrsta vhodnega toka: trifazni, Oprema: dokumentacija / priročnik, For sale is a precise and robust Friedrich Deckel FP3NC tool milling machine, year of manufacture 1985, equipped with Dialog 4 CNC control. This machine is made in Germany and is suitable for tool and mold making as well as for high-precision single-part and small series production. Technical Data (Excerpt) Model: FP3NC Control: Deckel Dialog 4 Year of manufacture: 1985 Serial number: 12767 Spindle drive power: 2.0 / 3.0 kW, pole-changeable three-phase brake motor Spindle speeds: 31.5 – 6300 rpm (2 ranges, manually switchable) Tool holder: SK 40 Quill travel (manual): 80 / 80 mm (horizontal/vertical) Travel paths: Ncodpoxlghpofx Advjp X-axis: 400 mm Y-axis: 400 mm Z-axis: 400 mm Feed rate: 2 – 3600 mm/min Rapid traverse: 4000 mm/min Clamping slots in table: 4 slots, 14H7, spacing 63 mm Total weight: approx. 1800 kg Electrical connection: 380 V, 50/60 Hz, connected load 14.5 kVA Rated current: 22 A Control voltage: 24 V Features & Control 4-axis path control with dialog-guided input 3D linear and circular interpolation, helical interpolation, polar coordinates Numerous drilling and milling cycles, graphical cycle entry support Milling cycle “pocket contour” for pocket machining (also irregular with islands) Subroutine technology, program storage up to 512 kBytes Tool corrections for up to 100 tools Interfaces for cassette recorder, punched tape reader, floppy disk, or Winchester disk drive (DNC-capable) Condition & Other Features Machine is fully functional High-precision, stable design – ideal for workshops, training, or production Operating manual and technical documentation available Inspection possible by appointment

Stanje: pripravljen za uporabo (rabljen), Rezkalni stroj Emco emcomat FB4 CNC upravljanje po ose X in Y Proto Trak tipa AGE 2 Možna tudi konvencionalna uporaba. Vpenjanje SK40 Hitrosti vretena: 50–2500 obr/min X-os: 450 mm Y-os: 300 mm Z-os: 350 mm Dolžina mize: 800 mm Ncjdpfxsxc H I Ro Advjp Širina mize: 400 mm Opremljen s hladilnim sistemom, izklopom v sili in odprtim varovalom mize z blokado (interlock).

Stanje: rabljeno, Leto izdelave: 2008, x-pomik 400 mm y-pomik 300 mm z-pomik 400 mm Vreteno vpenjanje ISO 40 Hitrosti vretena 40 - 2.000 obr/min Velikost mize 750 x 320 mm Brezstopenjski pomiki 10 - 380 mm/min Hitri pomik 1.200 mm/min Pogonska moč 2,2 kW Hod pina 80 mm Njdpfx Ajxa Hf Rjdvscp Obratovalna napetost 400 V Skupna potrebna moč 4,7 kW Teža stroja pribl. 1,1 t Potrebni prostor pribl. 1,15 x 1,40 x 1,85 m - Tovarniška št.: 148373 - 3-osni digitalni prikaz - Vodoravna rezkalna enota - Nagibna rezkalna glava ±45° - Hladilna naprava

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: F9B192402, dolžina podajanja os X: 450 mm, dolžina pomika po osi Y: 350 mm, dolžina podajanja os Z: 400 mm, največja hitrost vretena: 5.000 obr/min, hod vretena: 80 mm, hitro pomikanje X-os: 5 m/min, hitri pomik os Y: 5 m/min, hitri pomik na osi Z: 5 m/min, skupna višina: 1.990 mm, skupna širina: 2.030 mm, skupna dolžina: 1.980 mm, širina mize: 270 mm, dolžina mize: 400 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 5.000 obr/min, vrtljajska hitrost (min.): 10 obr/min, obremenitev mize: 450 kg, skupna masa: 2.270 kg, vhodna napetost: 400 V, teža obdelovanca (maks.): 450 kg, vhodni tok: 16 A, vhodna frekvenca: 50 Hz, Oprema: CE označba, dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, EMCOMAT FB-450 MC with Sinumerik 828D Path Control with “Manual Machine” Universal tool milling and drilling machine equipped with Sinumerik 828D path control and hydraulic tool clamping Ncjdpjxapdcefx Advop Working area X450/Y350/Z400mm Drive power 7/10 kW Speed range from 10–5000 rpm Feed rate from 10–5000 mm/min Rapid traverse up to 5000 mm/min Machinist’s precision as per DIN 8615 Tool holder: DIN 69871 SK40 Includes: • Linear guides • Ball screw spindles • Vertical milling head, swivels +/-90°, with 80mm quill travel • Swivel-out device for vertical head • Hydraulic tool clamping • Coolant system • LED machine lamp • Fixed angle table 800x400mm • Work area guard incl. chip tray • Automatic central lubrication • Operating tools • Documentation • Machining with open door (Operating Mode 3) • Controlled and manual operation modes combined in one machine • Sinumerik 828D path control incl. control package for 3 axes with ball screws and servo motors, Process cycles with graphical user support: Drilling cycles for drilling, deep drilling, reaming, tapping (with length compensation) on bolt circles and linear hole patterns, rectangular and circular pockets, slot milling cycle, facing cycles, etc., USB interface

Stanje: rabljeno, Leto izdelave: 2001, x-travel 400 mm y-travel 250 mm z-travel 400 mm Tool holder ISO 40 Spindle speeds 30–6300 / 20–4200 rpm Feeds 0 – 10,000 mm/min Quill stroke 90.0 mm Table size 600 x 320 mm T-slots 5 x 14 x 63 mm Control TNC 410 CA Spindle on-time ~126 h Motor power 11.0 kW Weight 1,300 kg Space requirements approx. 1,600 x 1,500 x 1,900 mm Original price incl. special accessories approx. €72,000 The machine was very rarely used (!!) with only approx. 126 spindle hours (spindle on-time) Equipment: - MACMOM / INAS CNC universal milling and drilling machine - HEIDENHAIN CNC path control TNC 410 CA * workshop-appropriate path control with * programming via user-friendly conversational dialog * HEIDENHAIN electronic remote control with handwheel - Swiveling control panel, mounted to the right of the machine - Hydraulic tool clamping (drawbar DIN69872-A) - Swiveling vertical milling head, both sides - ISO 40 - Speed range vertical - stepless: 30–6300 rpm - Speed range horizontal - stepless: 20–4200 rpm - Robust, rigid angle table with 5x T-slots - Coolant system with tray - Chip splash guard cabin - Operating instructions + wiring diagram for the machine Included special accessories: - 1x pneumatic clamping plate with unit - 1x WALTER TANIH125 NEGI-R dividing head - 1x machine vice - HILMA RÖMHELD type SM 100 Ncsdjxab T Aopfx Advsp - Numerous tool holders - Machine leveling feet * Machine video: ?v=3dqLbTme81E