Metalfors Ltd

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 070079A, skupna višina: 4.500 mm, skupna dolžina: 5.400 mm, skupna širina: 5.500 mm, Oprema: dokumentacija / priročnik, Giardina visokotemperaturna sušilnica, letnik 2007 Funkcija: sušenje vodnega laka na vratnih krilih Paternoster sistem Fodpfxjzcnu Ho Ahmeph

Stanje: dober (rabljeno), Leto izdelave: 1989, Funkcionalnost: popolnoma funkcionalen, Oprema: kabina, Proizvajalec: Garmat Belgija Tip: M 6/7A Letnik: 07/1989 Prostornina delovnega prostora: 70,5 m³ Kapaciteta ventilatorja: 24.000 m³/uro Moč motorja: 7,5 kW Plinski gorilnik: 200 kW Skupna električna priključna moč: 14 kW Fpjdpfx Aszcfp Ijhmjh Obratovalna napetost: 380/220 V Kapaciteta 24.000 m³/uro in plinski gorilnik 200 kW pomenita, da gre za resno profesionalno kabino, ne za hobi izvedbo. Popolnoma deluje; gorilnik in ventilator sta funkcionalna; filterski sistem je kompleten; brez večjih poškodb zaradi rje; Notranja dolžina: cca 6,70 m Notranja širina: cca 4,0 m Notranja višina: cca 2,5 m Mere so približne. Zunanje mere: 6,85 x 6,00 x 3,10 m cca. Kabina si je na voljo za ogled in mora biti razstavljena v lastni režiji. Za nakladanje zagotovimo viličar.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, obratovalne ure: 100 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 16P1269203, vrsta vhodnega toka: trifazni, obratovalni tlak: 7 letvica, zmogljivost črpalke: 7 l/min, moč: 0,06 kW (0,08 KM), Oprema: dokumentacija / priročnik, FUNCTIONAL PRINCIPLE The system is designed for proportioning (dosing) and mixing of two- or multi-component products. An electronic control monitors and regulates the specified mixing ratio. The base paint flows continuously, and the controller mixes in the required amount of hardener at short intervals (batchwise) via a valve. The flow rates of both base paint and hardener are measured by flow meters. For piston pumps, stroke sensors can be used as an alternative. The components and cleaning agents are supplied by supply pumps. Color Selection Mixing ratios, pot lifes, etc. are stored as recipes. Changing the recipe allows for easy color changes. Additional Features and Application Areas: - Suitable for low to medium pressure (32.5 MPa; 325 bar; 4714 psi). - 2K COMFORT XL model available for high pressure (53 MPa; 530 bar; 7687 psi). - Modular design – can be configured to meet customer requirements. - Electronic dosing accuracy ensures consistent quality. - Suitable for processing water-based 2K materials, as all material-wetted parts are designed for this purpose – for example, made from stainless steel. - The fluid section of the Ex variant is suitable for use in hazardous areas (Zone 1 and 2). - Many function indicators use simple symbols instead of language. Texts are displayed in the selected language. - Consumption overview for each component and for cleaning agents, VOC documentation. - Storage of the last 700 error messages with date and time. - Safety through continuous monitoring of system parameters, operator notification upon even the slightest malfunction, and automatic production interruption if necessary. - Parameter protection via security code. Settings can be backed up to a USB stick. - Electronic setting of the mixing ratio between 0.1:1 and 50:1. - Up to 100 work recipes. (Also with robot communication or Profibus compatibility.) - Option for two separate fluid circuits: – for simultaneous operation, – for rapid color changes, – or to separate two incompatible 2K materials (e.g., PUR and epoxy paints). - Programmable cleaning recipes save up to 60% cleaning agent compared to conventional systems. - Fully automatic control and monitoring for 1–4 spray guns. - Compatible with both solvent-based and water-based products, as well as selective automatic cleaning with water and/or solvents. - Use with manual or automatic atomizers. Fpsdpfezb I Spex Ahmeh - Integration features such as automatic booth release, automatic gun cleaning, etc. - Robot communication capability.

Stanje: rabljeno, Leto izdelave: 2008, Maks. teža na obesitveno točko: 44 kg Transportna tehnika (krmiljena s frekvenco): 0,6–2,0 m/min Skupna dolžina verige: cca 40.500 mm Razmak členov verige: 270 mm Po naši oceni je lakirna naprava v dobrem rabljenem stanju. Dodatna oprema, prikazano orodje in vpenjala so vključeni le, če je to navedeno v dodatnih informacijah. Spremembe in napake v tehničnih podatkih in informacijah ter vmesna prodaja pridržane! Fedozbvlwopfx Ahmjph

Stanje: rabljeno, Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.500 mm, skupna dolžina: 16.500 mm, skupna širina: 6.400 mm, Oprema: kabina, For sale is a high-quality, modular industrial surface treatment plant from the premium manufacturer RIPPERT Anlagentechnik (Order No. 20809025), built in 2009. The system is located in Nuremberg, features a linear configuration, and comes with comprehensive documentation. Ideal for large-scale component or series processing in industrial environments. Dimensions: LxWxH: approx. 16.5 x 6.4 x 5.5 m Combo spray booths (1&2): each approx. 6 x 4 m Washing booth: approx. 4.5 x 4 m SYSTEM SCOPE: - 3x combo spray/drying booths: Each fitted with large folding doors, full lighting, and supply/extract air ducts. - 1x industrial washing booth: For professional workpiece cleaning and preparation. - 1x technical room & daily requirements storage: Includes media control (RLT 4.0) and an integrated logistics area. TECHNICAL DATA & CONTROL CABINET: - Central control cabinet: Rittal TS 8005 freestanding enclosure (Dimensions: 3600 x 2200 x 500 mm, RAL 7035). - Electrical connection data: Main circuit 400 V, rated current 450 A with integrated PLC control. - Media connections: Prepared for gas (Burners 1–4), compressed air, demineralised/city water, wastewater, and heated pump water. IMPORTANT CONDITION NOTE & SCOPE OF DELIVERY: Fsdpsy U I Ulsfx Ahmjph The original operating manual (Volume 2a: Mechanics/Drawings) as well as the complete electrical documentation are included in the scope of delivery. Please note: The offer is as shown in the pictures, except for the pallets in the foreground. DISMANTLING AND DELIVERY TERMS: - Self-dismantling (preferred): Professional dismantling and transport to be carried out by the buyer at their own cost and risk. - Dismantling at extra cost: Organised dismantling or provision can be arranged upon prior agreement and cost coverage. KEY DATA & LEGAL INFORMATION: - Location: Nuremberg - Inspection: By prior arrangement. On request and at extra cost, loading and transport (Europe-wide) can be organised. Prices plus VAT. Inspection by appointment possible. Please contact us—our team will be happy to assist you. Trade-in or exchange is possible! Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY AND MORE. Are you looking for a high-quality yet affordable metalworking machine for your production? Or do you want to sell yours? For more information or ways to contact us, visit our website.

Stanje: dober (rabljeno), Leto izdelave: 2020, obratovalni tlak: 310 letvica, zmogljivost črpalke: 42 l/min, Graco Premier 42 litrov na minuto Fpedpfx Aey Ul Dkshmeh 6,9 GPM Razmerje 45:1 310 bar / 4500 psi Naprodaj 2 kosa Cena na kos: 900,-

Stanje: rabljeno, Leto izdelave: 2018, Wagnerjeva namestitev za elektrostatično prašno emajliranje, leto 2018, serijska številka 30210, s krmilno ploščo na dotik, sestavljena iz: • 1 PVC kabine z merami dolžina x širina x višina 3200 x 2130 x 4000 mm • Dimenzije vhodnega/izhodnega odprtina za obdelovanec: 1000 x 1000 mm • 1 HERDING filter (ciklon) z avtomatskim vračanjem prahu • 1 stresalnika za obešala z odsesovanjem in vračanjem prahu • 1 EP dozator s 32 črpalkami (injektorji) • 12 avtomatskih pršilnih pištol model PEA-C2 za nanašanje emajla, z dvojno lopatasto glavo • 9 univerzalnih krmilnih naprav EPG/S2 za prašne pištole • 1 GCA enota za obdelavo stisnjenega zraka (ogrevanje/vlaženje), ki se uporablja v instalaciji • 1 viseči enotirni transportni sistem dolžine 35 m, ki oskrbuje kabino. Linija se nahaja v matičnem podjetju v Italiji, v bližini kraja Pordenone. Fpedpfx Ahoy Tn Atsmoh Možnost neposrednega stika po predhodnem dogovoru.

Stanje: rabljeno, Leto izdelave: 2007, Professional combined painting and drying system with partition wall by Sehon, featuring large cabin capacity and PLC control system. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Internal cabin dimensions: 14,000 x 5,000 x 4,400 mm External cabin height: approx. 4,900 mm Entry/exit doors: 2 units, front and rear Door opening: 4,000 mm high x 4,500 mm wide Door construction: insulated steel sandwich design Door leaf thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Fjdpfx Ahoy Tiaaemsph Control system: Siemens C7 PLC control Operation: soft-touch panel with touch display Operating modes: Painting, Drying, Manual, Timed operation Temperature control: continuously variable, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint mist separation mat Operating hours counter: integrated Alarm notifications: optical and acoustic Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 volts Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Volume flow adjustment: adjustable motor slide Filter system: bag filters on sliding rails Pre-filter quality class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above finished floor level Exhaust air duct height: approx. 10 m above finished floor level Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: stainless steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner version: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety features: safety and overrun thermostat Cabin construction: heat and sound insulated Condition: used Additional painting equipment available on request. System currently in operation, available from June 2026.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Ta rešitev predstavlja inovativni razvoj podjetja 3K, zasnovan za zagotavljanje kompaktnega, a izjemno učinkovitega laboratorijskega pečnega sistema z zunanjimi merami 1000 × 1000 × 1200 mm. Enota je gnana z električnim motorjem moči 0,75 kW, v kombinaciji z nazaj ukrivljenim rotorjem premera 200 mm, kar zagotavlja optimalno dinamiko pretoka zraka v notranji komori. Ta konfiguracija omogoča enakomerno kroženje zraka, izboljšuje porazdelitev toplote in konsistentnost procesov po delovni prostornini. S strojno-inženirskega vidika je sistem zasnovan za stabilno aerodinamično delovanje z zmanjšano turbulenco in energijskimi izgubami, kar vodi v večjo učinkovitost in zanesljivost obratovanja. Preprosto povedano — to je kompaktna, robustna in inteligentno zasnovana peč, ki združuje natančen nadzor pretoka zraka z zanesljivim delovanjem, zato je idealna za zahtevne laboratorijske in lahke industrijske aplikacije. Fsdpfxsy A Eb Sj Ahmsph

Stanje: rabljeno, Leto izdelave: 1992, Funkcionalnost: omejena funkcionalnost, Lakirna kabina po slikah naprodaj, vključno s žeravno progo, kot je razvidno s slik. Ob samostojni demontaži je cena predmet dogovora. Fedpfx Ahsy Aldajmjph

Stanje: rabljeno, Lakirnica je sestavljena iz naslednjih elementov: Fpsdpeyy Rivjfx Ahmeh 1) Monorail MTL.120, nosilnost 600 kg, opremljen s kavlji in rotacijskim pogonom 2) Suha pršilna kabina za lakirne aplikacije 3) Kabina za odsesavanje prahu 4) Cevni sistem za odsesavanje hlapov topil 5) Cevni sistem lakirne peči 6) Rekuperator za elektrostatične brizgalne pištole 7) Wagner visokotlačna črpalka 30:1 za elektrostatični sistem za materiale na osnovi topil 8) Zaščitna ograja nizkotlačnega sistema ASAI 9) Flow-coating sistem 10) Nizkotlačna črpalka za elektrostatični sistem ASAI

Stanje: rabljeno, Leto izdelave: 2024, obratovalne ure: 300 h, Funkcionalnost: popolnoma funkcionalen, 1. MERKUR Airless 45:1 Pump - Ratio: 45:1 - Maximum fluid outlet pressure: 310 bar - Maximum air inlet pressure: 6.2 bar - Fluid flow rate at 60 cpm: 3 l/min - Volume per cycle: 50 cc - Air consumption at 7 bar and 20 cpm: 0.48 m³/min - Fluid inlet: ¾” - Fluid outlet: 3/8” - Includes: wall-mount kit, expansion chamber filter, suction hose, suction tube, suction filter. 2. Airless XTR 5 Manual Spray Gun - Maximum fluid pressure: 345 bar Fjdpfoyx Irlsx Ahmeph - Fluid passage: 2.3 mm - Fluid inlet: ¼” - Weight: 411 g - Dimensions: length 111 mm x height 180 mm - Wetted parts: aluminium, stainless steel, polyethylene, polyurethane, polypropylene, nylon, acetal, carbide, solvent-resistant O-rings. 3. Mini Merkur Airless 30:1 - Ratio: 30:1 - Maximum operating pressure: 207 bar - Maximum tip size: 0.019” - Fluid flow rate at 240 cpm: 1.5 l/min - Air inlet: 3/8” - Fluid outlet: ¼” - Minimum compressor size: 1.5 HP - Includes: wall-mount kit, suction hose, suction tube, suction filter. - Key advantages: convertible wall mount, pneumatic motor, uniform finishes, low air and material/solvent consumption. 4. Silver Plus Airless Manual Spray Gun - Maximum fluid pressure: 345 bar - Fluid inlet: ¼” - Weight: 510 g - Wetted parts: stainless steel, polyethylene, polyurethane, nylon, Teflon. 5. Product Hoses with Stainless Steel Braiding - Braiding: AISI 304 - Inner tube: Teflon - Applications: chemicals, solvents, steam - Length: 10 metres - Diameter: ¼"

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2000/80205, Complete powder coating line with automatic powder recovery. Fodpfoyrr Rqjx Ahmoph 1. WAGNER automatic powder coating booth – year of manufacture: 2000 Serial number: 2000/80205 Booth dimensions: 5.3 x 2.2 x 2.8 m Currently equipped with ZEUS Tribo spray guns – 8 pieces with rotary system Operating mode: through-feed Workpiece entrance dimensions: 100 x 158 cm 2. IMEL washer, external dimensions: 3 x 12 x 4.2 m (L-shaped) – Washer entrance size: 72 x 144 cm – Water tank: 3 x 2.2 x 1.2 m – Capacity approx. 6000 liters (located beneath the washer) – Water heating via Sant Andrea burner, model KB 40 GM with power modulation in the range of 179–468 kW (gas burner) 3. WAGNER powder filtering system, dimensions: 1.5 x 3.2 x 5.5 m 4. Overhead conveyor – length approx. 100 meters, with dedicated drive 5. WAGNER powder recovery unit with cyclone separator 6. Oven (double-circuit) with gas burner 163–390 kW One circuit for drying parts after washing; the other (longer) circuit for curing powder coating after spraying. Oven dimensions: 12 x 7 x 5.3 m, maximum workpiece size: 60 x 120 cm Additionally, we have 2 oil burners with comparable capacity as an alternative to gas burners. The total installed area is approximately 30 x 11 m.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 1999, Funkcionalnost: nepreverjeno, delovna širina: 1.300 mm, delovna višina: 110 mm, TEHNIČNI PODATKI Največja delovna širina: 1.300 mm Največja delovna višina: 110 mm Najmanjša delovna višina: 8 mm OPREMA Motorizirani podajalni valji 2 krtačni enoti Fpodpfeyqynujx Ahmjh Stroj se prodaja in dobavi v dejanskem in pravnem stanju („kot videno in sprejeto“) na podlagi fotodokumentacije ter tehnične/komercialne dokumentacije z opisnim značajem. Kupec ima pravico blago pred prevzemom pregledati in prevzema odgovornost za montažo, zavarovanje ter uporabo stroja na ciljni lokaciji. Zunanja referenca: 7615

Stanje: dober (rabljeno), Leto izdelave: 2016, skupna višina: 2.640 mm, skupna dolžina: 3.300 mm, skupna širina: 3.960 mm, volumenski pretok: 8 m³/h, Oprema: kabina, Tehnične podrobnosti: 75 m3 površine vključno z lakirno komoro, sušilno komoro in skladiščem za barve. Notranje mere lakirne komore: 3300 x 3960 x 2640 mm Tlorisna površina komore: 13,1 m2 Notranji volumen komore: 34,5 m3 Način ogrevanja: vnos zraka iz klimatiziranega prostora Dovod zraka: 8.000 m3/h Sušilna komora: Notranje mere komore: 3300 x 3960 x 2640 mm Tlorisna površina komore: 13,1 m2 Notranji volumen komore: 34,5 m3 Fpsdpfx Ahjyhbggomeh Način ogrevanja: električni grelni vložki, 22 kW 3x400V Dovod zraka: 2.500 m3/h Skladišče za barve: Notranje mere barvne kuhinje: 3100 x 2000 x 2600 mm Način ogrevanja: vnos zraka iz klimatiziranega prostora Tlorisna površina barvne kuhinje: 6,2 m2

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Με την παρούσα υποβάλλουμε την προσφορά μας για την προμήθεια μιας μεγάλης βιομηχανικής καμπίνας ανοιχτού τύπου, σχεδιασμένης για αποδοτικές εφαρμογές διαχείρισης και εξαερισμού αέρα. Η προσφερόμενη μηχανή έχει μελετηθεί ώστε να διασφαλίζει αξιόπιστη λειτουργία και σταθερή απόδοση σε βιομηχανικά περιβάλλοντα. Η καμπίνα διαθέτει συνολικές διαστάσεις 2000 mm μήκος, 2050 mm πλάτος και 2850 mm ύψος. Είναι εξοπλισμένη με ηλεκτροκινητήρα ισχύος 3 kW που λειτουργεί σε ονομαστική ταχύτητα 2800 στροφές ανά λεπτό. Ο κινητήρας συνδέεται απ’ ευθείας με δυναμικά ζυγοσταθμισμένο φτερωτή φυγοκεντρικού τύπου, διαμέτρου Ø452 mm, εξασφαλίζοντας ομαλή λειτουργία, χαμηλούς κραδασμούς και υψηλή μηχανική απόδοση. Fedsygh Alepfx Ahmeph Το σύστημα έχει σχεδιαστεί για παροχή αέρα 4000 m³/h, προσφέροντας αποτελεσματική εξαέρωση και κυκλοφορία αέρα για διάφορες βιομηχανικές διεργασίες. Η ανοιχτού τύπου κατασκευή της καμπίνας επιτρέπει απρόσκοπτη πρόσβαση, ευκολία συντήρησης και βέλτιστη κατανομή αέρα, γεγονός που την καθιστά κατάλληλη για εφαρμογές εξαερισμού, απαγωγής καπνών και γενικής βιομηχανικής διαχείρισης αέρα. Όλα τα μηχανολογικά και δομικά μέρη κατασκευάζονται σύμφωνα με τα πρότυπα βιομηχανικής μηχανικής, διασφαλίζοντας αντοχή, λειτουργική αξιοπιστία και μεγάλη διάρκεια ζωής. Η μονάδα είναι σχεδιασμένη για συνεχή λειτουργία και συμμορφώνεται με τα συνήθη βιομηχανικά πρότυπα ασφάλειας και απόδοσης. Η προσφορά περιλαμβάνει το πλήρες μηχάνημα όπως περιγράφεται παραπάνω, πλήρως συναρμολογημένο και έτοιμο για εγκατάσταση.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Με το παρόν υποβάλλουμε την προσφορά μας για την προμήθεια ευρύχωρης, ανοιχτού τύπου βιομηχανικής καμπίνας, ειδικά σχεδιασμένης για εφαρμογές διαχείρισης αέρα υψηλής απόδοσης. Η προσφερόμενη μηχανή έχει σχεδιαστεί για συνεχή βιομηχανική λειτουργία και ανθεκτικότητα σε απαιτητικά περιβάλλοντα. Η καμπίνα διαθέτει εξωτερικές διαστάσεις 2500 mm μήκος, 2250 mm πλάτος και 2650 mm ύψος. Είναι εξοπλισμένη με ηλεκτροκινητήρα υψηλής απόδοσης ισχύος 5,5 kW, με ονομαστική ταχύτητα λειτουργίας 2800 στροφές ανά λεπτό. Ο κινητήρας συνδέεται άμεσα με δυναμικά ζυγοσταθμισμένο φυγοκεντρικό πτερωτή διαμέτρου Ø452 mm, παρέχοντας σταθερή λειτουργία, χαμηλά επίπεδα κραδασμών και υψηλή αεροδυναμική απόδοση. Το σύστημα έχει σχεδιαστεί να προσφέρει μέγιστη παροχή αέρα 7000 m³/h, εξασφαλίζοντας αποτελεσματική αναρρόφηση και κυκλοφορία αέρα για βιομηχανικές διεργασίες. Η ανοιχτή διαμόρφωση της καμπίνας επιτρέπει εύκολη πρόσβαση, απλοποιημένη εγκατάσταση και αποδοτική κατανομή αέρα, καθιστώντας τη κατάλληλη για εφαρμογές όπως αερισμό, απαγωγή καπνών και γενική βιομηχανική διαχείριση αέρα. Όλα τα μηχανικά μέρη κατασκευάζονται σύμφωνα με τα πρότυπα βιομηχανικής πρακτικής, διασφαλίζοντας αντοχή, αξιοπιστία και μακροχρόνια λειτουργία. Η μονάδα είναι κατάλληλη για συνεχή λειτουργία και σχεδιασμένη να πληροί τα συνήθη βιομηχανικά πρότυπα ασφάλειας και απόδοσης. Fpjdpfsyghwiex Ahmjh Η προσφορά περιλαμβάνει το πλήρες μηχάνημα, όπως περιγράφεται παραπάνω, πλήρως συναρμολογημένο και έτοιμο προς εγκατάσταση.

Stanje: novo, Leto izdelave: 2026, Odprta industrijska kabina, zasnovana za učinkovito odsesavanje in prezračevanje zraka v profesionalnih in industrijskih okoljih. Enota ima skupne dimenzije 1269 × 1367 × 2379 mm in je opremljena z elektromotorjem z močjo 1,1 kW pri 2800 vrt/min. Gibanje zraka zagotavlja rotor s premerom Ø315 mm in zračno zmogljivostjo 2600 m³/h. Kabina je zasnovana za zanesljivo neprekinjeno delovanje, zagotavlja stabilen pretok zraka in učinkovito odsesavanje, zato je primerna za industrijske aplikacije, kjer je potrebna nadzorovana ventilacija in obravnava zraka. Fodpfjyghnnox Ahmsph

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, skupna višina: 4.000 mm, skupna dolžina: 7.100 mm, skupna širina: 8.100 mm, temperatura: 80 °C, ogrevalna zmogljivost: 116 kW (157,72 KM), Oprema: kabina, Komplette Nasslackieranlage mit Vorbereitungszone, Nasslackierkabine, Mischraum, Trocknungsofen und Abnahmezone. Anlage ist noch in Diest zu besichtigen. Weitere Details im Anhang oder auf Anfrage. - Abmessungen: LxBxH = 8.100 x 7.100 x 4.000 mm außen und 8.000 x 7.000 x 3.950 mm innen. - Höhe bis Unterkante der Schiene = 3.740 mm, gemessen ab Fußbodenniveau. - Mit gemeinsamer Schiebetür zur Lackierkabine. - Schiebetüren als Ofenausgang: BxH = 1.200 x 3.800 mm, ausgestattet mit 1 Fenster, 2 Flügel. - Notausgangstür mit Fenster in der Seitenwand: BxH = 800 x 1.900 mm, selbstschließend mit Türpumpe und Spanner. Die Notausgangstür ist mit großvolumigen, sehr elastischen EPDM-Dichtungen ausgestattet. - Wandtyp: Vertikale, doppelwandige Sandwich-Paneele gefüllt mit Mineralwolle, Stärke 55 mm. Inklusive: Beleuchtung, Lüftungsgruppe, Schaltschrank und ein komplettes Monorailsystem durch die gesamte Anlage bis in die Abnahmezone. Fpedpfx Ahsx H Rhremjh

Stanje: rabljeno, Leto izdelave: 1999, 1999 CM System D8 Zračni transporter (lakirna veriga) za premikanje stolov ali podobnih izdelkov, barvanih na kljukah. Linearni metri: 80. Pogonska skupina: lahek motoriziran Caterpillar Fpsdpfxsxyi Uue Ahmoh Delovna hitrost: min/maks 0,9 m/min Moč motorja: 2 HP Razvitje verige D8 in valji d. 37: 80 m Ravnalna tirnica po meri: 72 m Vodoravni zavoji 90° r=500 mm: 10 kosov Razmak kljuk: 0,80 m Prostor, potreben za transport: 5 prostih metrov na tovornjaku

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 5.000 mm, skupna širina: 3.500 mm, skupna višina: 2.950 mm, notranja višina: 2.650 mm, notranja dolžina: 4.900 mm, notranja širina: 3.400 mm, Oprema: kabina, Vehicle Spray Booth The vehicle spray booth is a fundamental piece of equipment for paint repair technology. It allows paintwork to be carried out under safe and comfortable conditions while minimizing negative impacts on both the surrounding area and the environment. Technical specifications: - External dimensions: 5000 (+ air supply unit 1350 × 2900 mm) × 3500 × 2950 mm - Drive-through gate: 3000 × 2600 mm (triple-winged) - Service door: 700 × 2000 mm - Structure: made from steel sheet - Heat exchanger: standard steel - Panels: steel panels with mineral wool insulation in the walls Booth wall structure: - Thickness: 50 mm - Filling: EPS polystyrene - Colour: white Booth floor: - Booth mounted directly on floor / concrete slab Double ceiling: - Outer ceiling panel - Full-length plenum above the ceiling area for supply air Air exchange system: - Supply air system: - Jet turbine 4 kW – 2 units - Air capacity: 26,000 m³/h - Exhaust air system: - Jet turbine 5.5 kW – 1 unit - Air capacity: 18,000 m³/h Lighting: - 8 side lamps - Ceiling lighting: 24 LED fluorescent tubes Air heating system: - Single-stage oil burner Riello model 40 G20 - Burner control: manual - Heat-up time: 8–15 minutes Fpodpfexnpczox Ahmsh Filtration system: - Double-layer filter structure - High-performance air purification system with up to 99% filter efficiency

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 7.000 mm, skupna širina: 4.000 mm, skupna višina: 3.130 mm, notranja višina: 2.700 mm, notranja dolžina: 6.900 mm, notranja širina: 3.900 mm, Oprema: kabina, An automotive spray booth is a fundamental piece of equipment for refinishing technology, enabling painting operations to be carried out safely and comfortably while minimizing their negative impact on the immediate surroundings and the environment. Specifications: - External dimensions: 7000x4000x3130 mm - Internal dimensions: 6900x3900x2700 mm - Entrance gate: 3000x2600 mm (three-leaf) - Service door: 640x1800 mm - Structure: standard steel - Heat exchanger: standard steel - Panels: EPS polystyrene - Total power: 7kW - Installation: indoor use only Spray booth wall construction: - Wall thickness: 50 mm - Core: EPS polystyrene - Colour: white Spray booth base: - The booth is installed directly on the floor/screed - Booth intended for indoor installation only Double roof: - Upper external layer - Corrugated steel sheet panels - Internal structure - Partially latticed Air change system (supply system): - Jet fan 5.5kW – 1 unit - Airflow capacity: 20,000 m³/h - Belt-driven transmission - No air recirculation control Lighting (Side lights): - Side lamps: 20 units - No possibility to fit top lighting Air heating system: Single-stage Riello G10 oil burner 54-120 kW - Burner control: manual - Heat-up time: 20 minutes Booth access: Fpjdpfxoxnbf Uo Ahmoh Main door: - Dimensions: 3200x2600 mm - Three-leaf door system Service door: - Booth fitted with a service door - Equipped with pressure locks Booth filtration: - Intake: Pre-filter Ceiling filter: Primary (high-flow) filtration Filter specifications: - Weight: 600g/m³ - Thickness: 50 mm - Airflow: 900m³/h - Collection efficiency: 97% - Air velocity: 0.25m/s - Dust holding capacity: 650g/m³ - Max. temp.: 100°C - Filtration class (EN 779): M5 - Fire resistance (DIN 53438): F1

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, skupna višina: 5.850 mm, skupna dolžina: 12.125 mm, skupna širina: 5.150 mm, skupna masa: 8.000 kg, trajanje garancije: 12 meseci, notranja višina: 5.000 mm, notranja dolžina: 12.000 mm, notranja širina: 5.000 mm, Oprema: kabina, osvetlitev, PAINT SPRAY BOOTH 12x5x5M EZ Series Model: - LED ceiling lighting - LED side lighting Fpedpfoxm U Exsx Ahmsh - RIELLO oil burner - Four fans, including: - 2x supply air fans - 2x exhaust air fans TECHNICAL SPECIFICATIONS: - External dimensions: 12125x5150x5850 mm - Internal dimensions: 12000x5000x5000 mm - Entrance gates: 4000x4800 mm (2 units, four-winged, with reinforced hinges) - Additionally, a BOX measuring 1650 mm x 8000 mm must be taken into account – can be positioned on the right or left side. - Construction: galvanized steel frame structure - Heat exchanger: high-quality stainless steel - Panels: filled with mineral wool - Drive-on ramps – 2 units - Fully grated floor The reinforced frame structure prevents vibrations and the air surge effect from the main supply air duct. Double-layered roof design: - Outer top layer - Inner truss construction with V600 ceiling filter Air circulation system: - Supply air system: jet turbine 7.5 kW – 2 units - Exhaust air system: jet turbine 7.5 kW – 2 units Air filter system: - Pre-filter captures particles >10 μm - Ceiling filter captures particles >5 μm - Floor filter: Paint Stop - Activated carbon filter Lighting: - Ceiling lighting: 52 LED fluorescent tubes (14 slanted fixtures, each with 4 tubes) - Side lighting: 26 LED panels integrated in the right, left, and rear walls Burner: Riello – 2 units, Oil model 40 G20, approx. 200,000 Kcal/h - Heat exchanger: high-quality stainless steel - Heating-up time: 8–15 min. (max. 80°C) Optional equipment: - Boxes on the booth roof - Insulated roof - Pass-through doors - Water wall - Paint finish according to RAL color chart - EX version (explosion-proof) available

Stanje: dober (rabljeno), Airless brizgalna naprava, lakirni aparat, Spraypack, naprava za brizganje barve, sistem za brizganje barve, lakirna črpalka, elektrostatična brizgalna naprava, airless kompletni sistem, pnevmatske batne črpalke, airless visokotlačna črpalka, zračni motor, AIR MOTOR -Proizvajalec: Wagner, Airless brizgalna naprava Tip: 33-70 s transportnim vozičkom in brizgalno pištolo -Maksimalni pretok materiala: 12,6 l/min -Vhodni zračni tlak: max. 8 bar, delovni tlak max. 264 bar Fpedpfxsw U T Ats Ahmeh -Posamezne komponente: glejte fotografije -Dimenzije: 830/680/V1140 mm -Teža: 50 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: Inv.119140, skupna dolžina: 26.000 mm, skupna širina: 9.000 mm, Oprema: kabina, osvetlitev, 1 used painting line, featuring a circulating conveyor system, manual paint booth for sample work, automatic paint booth equipped with a robot and workpiece rotary holder, reverse osmosis unit for deionized water, paint preparation, and exhaust air treatment. The system is currently in operation on a two-shift basis for serial production. Fjdpfxewqg Iio Ahmjph Manual loading and unloading onto a conveyor belt; the remainder of the process is fully automated. Change as of 18.7.25: Dismantling to be carried out by the buyer at the Lohr facility starting September 2025. All costs for dismantling, as well as for packaging, collection, and transport to the buyer’s site (FCA), are to be borne by the buyer. The area must be completely cleared for installation of new production machinery by mid-January 2026 at the latest. For further details, please refer to the attached handout/flyer. Due to the high complexity of dismantling, early and careful planning with the responsible dismantling contractor is mandatory. Timely contact and/or site visit at the factory is also recommended. Further information can be found in the attached handout. --- Information in English, French, or Spanish available upon request. --- Please state your offer price. Sale only within the EU, Switzerland, Turkey, and the United Kingdom. Dismantling is to be organized by the buyer. --- Sold without packaging; any and all warranty claims are excluded. If you intend to carry out dismantling yourself, please indicate this in your offer. We do not guarantee the accuracy of the technical data, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements as stipulated by applicable accident prevention regulations.