Pinter Möbel+Objektbau GmbH & Co. KG
Pinter Möbel+Objektbau GmbH & Co. KG iz Achern
Ladenbau, Schreinerei -25 Mitarbeiter
gospod Helmut Pinter
Hauptstraße 93
77855 Achern
Nemčija
Trenutne ponudbe podobnih prodajalcev
Mali oglas
Gelsenkirchen
835 km
Stiskalnica za betonske plošče
HidrobrasilBetonpresse
HidrobrasilBetonpresse
Pokliči
Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, stiskalna sila: 20 t, Hydraulic 20 T Single-Column Production Press for the Manufacture of Lightweight Concrete Components
Here are the technical specifications of the machine on offer:
If the press does not fully meet your requirements, please request a customized offer tailored exactly to your needs with just one click:
Contact us for a custom quotation.
HIDROBRASIL manufactures presses precisely to your specifications at surprisingly competitive prices!
Technical Data & Information:
a) Closing speed up to 10 mm/sec
b) Opening speed up to 20 mm/sec
c) Maximum open height: 300 mm
d) Pressing speed: 4 – 10 mm/sec (adjustable via rotary knob)
e) Press mold size: 600x800 mm
f) Ram size: 950x600 mm
g) Manual lubrication (via grease nipples)
h) Pressure setting from 5 T up to 20 T (adjustable via rotary knob)
i) Stroke: 300 mm
j) Installation, commissioning, and operator training available at an additional charge
Technical Specifications
Type of press: C-frame press, hydraulic
Thermally neutral: 80 – 120 °C
Number of operator sides: 1 side
Forces: Maximum pressing force 200 kN
Free tear-off force: max. 10 kN
Pressure build-up time (closed tool, steel-on-steel): max. 3 sec
Dimensions: Maximum opening width 350/50 mm
Stroke: 300 mm
Table height above floor: approx. 900 mm
Overall height above floor: approx. 1900 mm
Minimum required hall height: 2,500 mm
Parallel deviation at 20°C: +/- 0.4 mm
Deflection measured at max. closing force with 2/3 table loading: ≤ 0.6 mm/m
Weight: Press total weight (without operating fluids) approx. 2.2 t
Speeds: Fast closing at 10 mm/sec
Pressing speed: 10–5 mm/sec
Sound pressure level measured at 1.5 m height at the control panel: max. 78 dB(A) (DIN 45635-T16-KL3)
Hydraulics
Number of press cylinders: 1
Plus 1 ejector, 110 mm stroke, max. operating pressure 255 bar
Pressure build-up time, pressing: 03 sec
Pressure accuracy during press stroke: +/- 5 bar
Main pump: BOSCHREXROTH/ASC, approx. 6 L/min
Oil volume: approx. HLP 46 D 100 liters
Isdpjia Nc Tjfx Adkotd
Ambient temperature: max. 40°C
Oil temperature: max. 55°C
Preheat temperature: °C
Electrical
Main supply: 400 V AC
Control voltage: 24 V
Frequency: 50 Hz
Hydraulic main motor connection: 3 kW
Total connected load: approx. 4 kW
(C-frame Press, Hydraulic Press, Hydraulic Production Press, Concrete Press)
Are you looking for a perfectly tailored machine?
Contact us for a custom quotation.
Our hydraulic presses are manufactured in compliance with German machinery directives as well as European machinery directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed both Canadian and European safety requirements, as they fully comply with the Brazilian national safety directive NR 12, which builds upon those standards. Our core competence is the production of special-purpose machinery and press automation. We supply custom-built hydraulic presses, press brakes, and guillotine shears at exceptionally competitive prices.
For the hydraulics, we incorporate components primarily from leading European manufacturers.
Mali oglas
Ennepetal
802 km
Stiskalnica za betonske cevi
HidralmacBetonpresse
HidralmacBetonpresse
Pokliči
Stanje: novo, Leto izdelave: 2017, stiskalna sila: 150 t, številka stroja/vozila: DF0149, Pressure: 2x 75 / 150 t
Clear width: 2050 x 965 mm
Stroke: 800 mm
Total installed power: Main motor 22 kW
Approx. machine weight: 6.5 t
Required space approx.: 1500 x 1025 mm
Lower slide: 150 mm
Upper slide: 150 mm
Base plate steel: 72 mm
Additional motors and loads: 2 kW
Slide size upper slide approx.: 870 x 350 x 150 mm
Slide size lower slide approx.: 1500 x 600 x 150 mm
Itsdpfx Aed Aftpedkod
Base plate: 1500 x 1025 x 75 mm
Top plate: 1500 x 1025 x 150 mm
Guide pillar diameter: 120 mm
Piston diameter: 80 mm
Oil tank: 350 l
Oil requirement: 320 l
Stroke of both lift cylinders and pressure cylinder each: 350 mm
Max. open height: 1600 mm
Pressing speed: 15-0 mm/sec
Lifting speed: 100 mm/sec
Window size approx.: 2050 x 965 mm
Wall thickness approx.: 6 mm
Position control accuracy via non-contact sensors: 0.5 mm
The press is equipped with two column guides, each with a diameter of 120 mm, which guide both the lower and the upper slides. The guides are made of bronze.
The lower slide is designed to be extremely robust with a thickness of 150 mm. The upper slide also features a 150 mm thick steel plate.
The base plate of the machine is made of 72 mm thick steel to ensure the machine can be safely transported. For this reason, the oil tank with the hydraulic system is also mounted close to the base.
Both the hydraulics and the electronics are permanently fixed to the machine and protected from contamination by a cabinet.
To dissipate the resulting heat, the machine is equipped with an oil cooler mounted on top of the press. The control cabinet is also air cooled.
For potential future maintenance work on the hydraulics, the interior rear panel of the press can be easily removed.
The two-hand control panel is permanently mounted to facilitate transport, but has a hinged joint for flexibility.
High-resolution light barriers prevent personnel from entering the danger zone.
For comfortable operation, the machine features transparent acrylic windows (6 mm thick) on both sides, which may need to be replaced after several years of use, though this is a minor expense.
Additionally, the press is equipped with 4 powerful LED lights integrated into the top plate.










