Fenstertechnik Heimerl GbR

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 3.950 mm, skupna širina: 1.220 mm, skupna višina: 1.610 mm, skupna masa: 1.900 kg, vhodna frekvenca: 50 Hz, vhodna napetost: 400 V, Fully automatic large-format edge polishing machine with CNC control and swiveling milling/polishing unit for finishing cut or pre-milled surfaces. The machine is suitable for transparent, technical, or decorative plastics (PMMA, PC, PETG, etc.) as well as for processing composite materials (PMMA with paper or aluminum). The required process parameters can be conveniently selected via the integrated material library, based on the material to be processed and the desired surface finish. Tool recommendations and the required tooling setup for the specific process are also displayed. The high precision of the polishing table minimizes streak formation during processing. Additional mounting points for side stops or further guiding aids allow for flexible adaptation to any product. Key features: - CNC control with material library - Machine base and front stop - Milling/polishing unit - Working area - Multifunction table - Tools Technical Data*: Material thickness (0°/45°/60°): 2 – 120/85/60 mm Material length: 20 – 3,050 mm (With pass-through) up to 6,100 mm Table width: 525 mm Swivel range: 0° – +63° Milling depth (0°/45°/60°): 0.05 – 1.5/3/3 mm Motor speed: 6,000 – 12,000 rpm Feed speed: 0.1 – 5 m/min Return speed: 50 m/min Number of clamping cylinders: 6 (optionally up to 20) Number of side stops: 1 (optionally up to 8) Extraction port Ø: 100 mm Machine length: 3,950 mm Machine width: 1,220 mm Machine height: 1,610 mm Working height: 926 mm Compressed air supply: 6 bar Operating voltage: 400 V, 50 Hz, +PE +N Milling motor power: 4.5 kW Drive motor power: 1.2 kW Total power: 7.5 kW Weight: 1,900 kg Tool type: EURACRYL ES with quick-change system Vacuum table: Included Remote maintenance: Included Tool holder: Included (1x tool holder for 4 cutting edges) Tool: Not included Casdpfxsxd Si Aj Afqsa *Subject to material tests, depending on material type, tooling setup, and surface finish Scope of delivery: - 1 operating manual Item no. 0175200

Stanje: novo, Catalogue no.: H0531 Caedpfx Aovw Rtwjfqja – New machine, in stock – Tilting spindle – With sliding side carriage – CE certificate – Operating and maintenance manual (DTR) in Polish TECHNICAL DATA Spindle diameter: 30 mm Spindle stroke: 100 mm Max. spindle diameter: 180 mm Spindle tilt adjustment: -5 to +45 degrees Table dimensions: 1000 x 360 mm Sliding table: 1000 x 250 mm 4 speed options: 1800, 3000, 6000, 9000 rpm Motor power: 2.8 kW / 3.9 kW Extraction port diameter: 100 mm Dimensions (L/W/H): 1150 / 1155 / 730 mm Weight: 270 kg PRODUCT FEATURES The FS 200SF bench-mounted spindle moulder has a robust frame with a grey cast iron table top and a high-quality fence, providing secure material clamping and precise adjustment. The price includes the spindle moulder with sliding side carriage. The FS 200SF with tilting spindle offers a wide 4-speed range: 1800/3000/6000/9000 rpm. It is suitable for machining straight-edged workpieces and for creating decorative strips, grooves, tongue and groove joints, tenons, and dovetails. The welded steel body combined with the large cast iron table ensures the machine is very stable and solid, resistant to vibration. Precision sliding table included. Net price: 14,100 PLN Net price: 3,350 EUR Net price calculated at 4.2 PLN/EUR (price may be subject to change in case of significant currency fluctuations)

Stanje: zelo dobro (rabljeno), SCM MiniMax Formula1 8/24 Spindle Moulder Technical Data: Spindle diameter: 40 mm Spindle height: 140 mm Speeds: 3000/4500/6000/7000/10000 rpm Manual spindle height adjustment Spindle lock Codpfxouyg Tco Afqjaa Working table dimensions: 730 x 1860 mm Working table dimensions with sliding carriage: 760 x 600 mm Adjustable fence arms Power supply: 400 V Overall Dimensions: Length: 3680 mm Width: 1200 mm Height: 1500 mm

Stanje: rabljeno, Wigo Double-End Tenoner with 3 units per side, complete with inverters. - Circular Saw (right and left) - Spindle Moulder (right and left) Codjummldjpfx Afqeaa - Spindle Moulder (right and left) Maximum working width: 1500 mm Motor power: Circular saws: 3 kW x 2 Spindle moulders: 5.5 kW x 2 Rotary sanders: 5.5 kW x 2 Feed motor: 4 kW Shoulder width adjustment motor: 3 kW

Stanje: zelo dobro (rabljeno), SCM Praktika in excellent condition Cedpfxst Hkq Re Afqoaa

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg Casdpfer A Eq Rex Afqsa PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: rabljeno, Technical data: Spindle diameter: 35 mm Spindle height: 140 mm Caodpfxsp T Un So Afqja Speeds: 3000/4500/6000/8000/10000 rpm Manual spindle height adjustment Spindle locking mechanism Worktable dimensions: 350 x 1190 mm Adjustable fence arms Extraction port diameter: 115 mm Motor power: 4 kW Power supply: 380 V Overall dimensions: Length: 1190 mm Width: 860 mm Height: 1600 mm

Stanje: dober (rabljeno), Leto izdelave: 1985, Zunanje mere 1200x1050x1700 mm Delovna miza 1020x800 Gred za orodje premera 30mm Cajdjivy Tfspfx Afqsa Nagib orodja -10° do +45° Moč 7,5 kW

Stanje: rabljeno, Leto izdelave: 2000, številka stroja/vozila: 0-260-06-0228, Foot control 1200 x 800 mm Extraction nozzle 80 mm Pneumatic connection Cajdoigadlepfx Afqja Cable + 16 A plug 1 set of operating tools 1 set of measuring rollers

Stanje: rabljeno, Technical data: Cajdpfx Afjh Dzxzoqja Spindle diameter: 35 mm Spindle height: 145 mm Max tool size: 220 mm Speeds: 2900/4400/6000/8000/10000 rpm Manual spindle height adjustment Spindle lock Table dimensions: 300x1100 mm Adjustable fence arms Motor power: 5.5 kW Power supply: 380 V Manufacturer: Casadei Overall dimensions: Length: 1170 mm Width: 800 mm Height: 1230 mm

Stanje: novo, Technical specifications: Spindle diameter: 35 mm Spindle height: 140 mm Speeds: 1300/2500/3500/5000/6000/8500 rpm Electric spindle height adjustment Spindle locking Table dimensions: 700 x 1200 mm Adjustable fence arms Motor power: 4 kW Power supply: 380 V Manufacturer: Paoloni Caedpfjhp N Nbsx Afqsa Overall dimensions: Length: 1200 mm Width: 850 mm Height: 1340 mm

Leto izdelave: 1996, Stanje: rabljeno, Profile edge grinding and milling machine, edge grinding machine, edge grinder, grinding machine - with: copy device - Equipment: 1 grinding head - Power: 1.1 kW Cajdpsd Dzlijfx Afqoa - Speed: 500-1500 rpm - Dimensions: 1200/1420/H1520 mm - Weight: 656 kg Compact linear milling and grinding machine for arbitrary profiles on strips and panel edges. Extremely short changeover times to stationary grinding machine. Corner processing on MDF and solid wood workpieces with various radii (R = 1 to R = 30 mm) and corner angles. Manual setting of corner angles from 25 to 170 degrees. The grinding process during corner machining is completed in a single clamping (approx. 10 seconds).

Leto izdelave: 1995, Stanje: rabljeno, Profile edge sanding and milling machine, edge sanding machine, edge sander, sanding machine -with copying device -2x milling heads -Power: 1.5 kW -Speed: 3000-6000 rpm -1x sanding head -Power: 1.1 kW -Speed: 500-1500 rpm -Milling and sanding heads adjustable in thickness -Max. workpiece thickness: 40 mm -Max. corner radius: 40 mm -Dimensions: 1200/1600/H1520 mm Casdpjcg Al Sjfx Afqea -Weight: 782 kg

Leto izdelave: 1988, Stanje: rabljeno, with lateral crosscut saw Caedpfxjbaz E Aj Afqea