R & T RecyclingTechnik

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2019, obratovalne ure: 3.000 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 70 t, skupna masa: 9.500 kg, širina odprtine za polnjenje: 420 mm, dolžina polnilne odprtine: 1.250 mm, Technical Data for Baling Press / Can Press / Sheet Metal Press: Manufacturer: unoTech GmbH Model: UPAXX 70 Year of manufacture: 2019 Operating hours: approx. 3,000 hours Pressing force: 700 kN at 315 bar Filling opening (feed chute): 420 x 1,250 mm (D x W) Channel cross-section (bale size): 350 x 500 mm (H x W), length depends on material Drive power: 30 kW Total connected load: 40 kW Total current consumption: 70 A Throughput for empty beverage cans: - with one compaction cycle: approx. 1.7 t/hour Ljdpfxju Th S Se Agwjru - with two compaction cycles: approx. 2.5 t/hour Achieved compaction: approx. 1,200 kg/m³ Hydraulic oil tank volume: 850 L Press dimensions (assembled): 8,000 x 1,600 x 2,500 mm (L x W x H) Transport weight (press): approx. 9.5 t Accessories: Oil cooler 1.5 kW, oil tank heater 1.5 kW, press box made of wear-resistant steel S355 Material suitability: According to the manufacturer, this machine is suitable for pressing tin cans, sheet metal trimmings, steel sheet, as well as aluminum, brass, and copper scrap. Condition of the baling press: The baling press has been completely overhauled in our workshop. The press is in very good condition and is sold with a 12-month OBM spare parts warranty. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic circuit diagrams). Inspection is possible by appointment. We do not assume liability for the technical specifications or possible errors.

Stanje: rabljeno, Horizontalni hidravlični drobilec za zabojnike Ljdpfx Aepyncajgweru

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The BTS Drum Press PLC auto is ideally suited for compacting 30 to 220 L steel drums, but it can also easily compress plastic and cardboard drums. In many cases, the compressed valuable material can even be remarketed afterwards. The drum press stands out especially for its reliability and user-friendly operation. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Pressing time: 40 seconds Motor: 11 kW, 32 amp Power supply: 380 - 400 V (3-phase) Noise emission: 68 dB PLC control with automatic pressing cycle 30-liter collection tray with drain tap Press ram with piercing spikes for venting drums during the pressing process Maximum safety standards due to fully enclosed housing Suitable for 30 to 220 L steel bung drums, plastic drums, and cardboard drums A quality product "Made in Europe" Suitable for compacting: Ledpfx Agoc Spgujworu Steel drums Plastic drums Cardboard drums Fiber drums and paper drums Additional options: Annual maintenance with accident prevention inspection (UVV inspection) Machine color according to RAL Insert for pressing cans, oil, and air filters

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The BTS-MF60HD Special Baler is ideal for compacting challenging and tough materials such as cans, PET, metal buckets and other sheet metal containers. It also efficiently reduces plastics to a minimum volume. This specialist baler stands out for its ease of operation and large filling chamber. Finished bales can be effortlessly removed using the automatic bale ejector. By compacting these waste/recyclable materials, you achieve a volume reduction of up to 90%, significantly lowering your disposal costs and ensuring the material is efficiently returned to the recycling loop. Lredpsbhy Twsfx Agwsu Pressing force: 13 tonnes Bale weight: 25 – 60 kg (depending on material) Bale size: 650 H (var.) x 600 W x 400 D mm Machine dimensions: 2144 H x 1267 W x 1328 D mm Machine weight: 706 kg Transport height: 2144 mm Filling aperture: 600 W x 400 H mm Pressing cycle: 25 seconds Motor: 2.2 kW 16 amp Power supply: 220 – 240 V (single phase) Noise level: 68 dB User-friendly lever control Bale ejector for easy removal Retaining claws to minimize material spring-back Cross strapping for secure bale integrity Holder for 7 rolls of strapping band A quality product “Made in Europe” Suitable for compacting: PET bottles Cans and metal containers Canisters and plastic containers Cardboard and foil Optional extras: Annual maintenance with safety inspection (UVV) Machine colour according to RAL Strapping bands Power supply 380 – 400 V (3 phase) PET press, PET baler, can press, can baler, special baler, baler, paper press, waste paper press, cardboard baler, cardboard press, foil press, paper baler, waste baler, waste compactor, recyclable material press, refuse compactor, general waste press

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, The BTS drum press is ideally suited for compacting steel drums from 30 to 220 liters, but it can also easily compress plastic and cardboard drums. In many cases, the compressed recyclable material can even be remarketed afterwards. The drum press is especially notable for its reliability and ease of operation. By compacting these waste/recyclables, you achieve a volume reduction of up to 90%, significantly reduce your disposal costs, and properly return the material to the recycling loop. Pressing force: 24 tons Machine dimensions: 2587 H x 1190 W x 1000 D mm Machine weight: 690 kg Transport height: 1800 mm Compaction ratio: 8:1 Press cycle time: 40 seconds Motor: 11 kW 32 amp Power supply: 380–400 V (3-phase) Noise level: 68 dB User-friendly lever operation 30-liter catch tray with drain tap Ram with spikes for venting drums during compaction Maximum safety standards through fully enclosed housing Suitable for 30 to 220 liter steel tight-head drums, plastic drums, and cardboard drums A quality product "Made in Europe" Lsdpfxjzdr To Agworu Suitable for compacting: Steel drums Plastic drums Cardboard drums Fiber and paper drums Additional options: Annual maintenance including UVV safety inspection Machine color according to RAL PLC control with automatic pressing cycle Insert for cans, oil, and air filters Drum press for metal drums / plastic drums