Torsten Spin Neu- und Gebrauchtwagenhandel "Autopartner"

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Werkstückdurchmesser: 1,0 – 18 mm Werkstücklänge mit Anschlag: bis 600 mm Kleinste Werkstücklänge: ab 5 mm Größere Längen auch ohne Anschlag möglich Trennspindel ca. 5400/11120 U/min Schleifspindel 2160/4.450 U/min Trennscheibe Durchmesser 125 x 1,5 x 20 mm Schleifscheibe Durchmesser 100 x 50 x 20 mm Maße und Gewicht: Maße 800 x 450 mm x 1.100 mm Gewicht ca. 200 kg Die Maschine vereint Trennen und Schleifen in einem Arbeitsgang und ist ideal für die hochpräzise Bearbeitung kleiner bis mittelgroßer Werkstücke wie Auswerferstifte, Hülsen oder Stempel. Bestens geeignet für: Werkzeug- und Formenbau Stanz- und Umformtechnik Produktion von Hartmetall- und HSS-Werkzeugen Präzisionsmechanik und Fertigungstechnik Kombinierte Trenn- und Schleifbearbeitung in einem Gerät Giodpfxoypadmj Agwep Hohe Präzision bei kurzen Zykluszeiten Für Stahl, HSS und Hartmetall geeignet

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Skupna potrebna moč 5,5 kW OPIS SLEDI! Gedpfx Aoyiu N Rsgweip

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Skupna višina: 1350 mm Širina z razdelilno omarico: 850 mm Globina: 1420 mm Moč motorja: 1,5 / 3,0 kW Premer diska: 200 mm Območje rezanja do: 40 mm Godpox Tpbwjfx Agwoip

Stanje: rabljeno, Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, skupna širina: 360 mm, skupna dolžina: 820 mm, skupna višina: 500 mm, vrsta vhodnega toka: Klimatska naprava, premer obdelovanca (maks.): 25 mm, skupna masa: 92 kg, vhodna napetost: 400 V, This LY300 short and longitudinal grinding machine is pre-owned but has only been used sporadically. The condition is very good, with only some paintwork damage and a scratched machine cover indicating its age. For operator safety, the machine is equipped with a lid switch that automatically shuts down the machine when the cover is opened. A restart interlock prevents any unintentional start-up. Giodpsxwp A Hjfx Agwsp For machining short workpieces, the clamping hand is included with this machine. We can also offer consumables such as cut-off and cup grinding wheels. Application: Rod-shaped workpieces can be cut to length and face-ground in a single operation. Ideal for manufacturing ejector pins. The machine features two parallel grinding spindles, one for parting-off, and one for precision face grinding to final size. The required workpiece length can be set to an accuracy of 0.01mm using the integrated measuring scale. Workpiece length without clamping hand: 54 - 300 mm Workpiece diameter: Ø1-25 mm Workpiece length with clamping hand (included as accessory): 12.5 - 60 mm Workpiece diameter: Ø1-10 mm Ejector pins with cylindrical head: maximum size 6 Maximum workpiece oversize before machining: 195 mm Length tolerance: +/-0.01 mm Squareness: +/-0.01 mm Weight: 92 kg Dimensions without scale (W x D x H): 430 x 360 x 500 mm Dimensions with scale (W x D x H): 820 x 360 x 500 mm Height with cover open: 950 mm Cut-off wheel (reinforcement-free): SGA60P6BR1, Ø180 x 1 x Ø31.75 mm Cup grinding wheel: PA46, Ø100 x 50 x 10 x Ø20 mm Location: Austria / Vienna Includes the following accessories: • 1 pcs. cut-off wheel SGA60P6BR1 with flange, mounted • 1 pcs. cup wheel PA46 with flange, mounted • 1 pcs. dressing diamond, mounted • 2 pcs. Y face spanner wrenches • 1 pcs. pin key 6 mm • 1 pcs. 300 mm scale • 1 pcs. micrometer head with scale bushing • 1 pcs. lever • 1 pcs. operating manual in German Operating procedure: Open prism clamp: move lever in the middle to the right and insert workpiece Close prism clamp: move lever to the left Cut-off: move lever upwards to the left Face-grinding: move lever downwards to the left Open prism clamp: move lever to the center and right, remove finished workpiece. The grinding wheel can be adjusted and dressed at any time without losing the set dimension.

Stanje: rabljeno, Leto izdelave: 2009, Suitable for the automatic cutting and surface grinding of carbide and HSS rods with high precision, for both standard and custom solutions. Equipment: - Full enclosure - Automatic feed (hydro-pneumatic) - Rapid traverse adjustable via touch panel - Automatic fire extinguishing system Kraft & Bauer FB 703 - Freely programmable length positioning - Siemens Simatic HMI control system - Prepared for connection to a central coolant system Workpiece diameter with loading magazine: 3 - 20 mm Workpiece length without loading magazine: 3 - 32 mm Workpiece length with loading magazine: 3 - 310 mm Gedpfx Agjwd Ha Sewjip Workpiece length without loading magazine: 1 - 450 mm Grinding spindle speed: 2,000 rpm Weight: approx. 1,700 kg Dimensions (L x W x H): 1,900 x 1,200 x 2,400 mm Colour: grey

Stanje: zelo dobro (rabljeno), Precision Grinder for Cutting Ejector Pins to Size and Grinding Pin Ends Grinder Features: - Precision machine enabling semi-automatic cutting of ejector pins to size and simultaneous end face grinding in a single setup - Adjustable during operation - Belt tension can be automatically adjusted and controlled (the greater the resistance, the tighter the belt) - Grinder for ejector pin cutting and end face grinding - Ejector Pin Cutting and End Face Grinding Machine, Manufacturer’s Code: 100 Technical Specifications: - Motor power: 0.735 kW - Maximum speed: 3,600 rpm Gjdjvyuw Sspfx Agwsip - Diameter range: ⌀1–25 mm - Maximum length: 300 mm (optionally 500 or 600 mm) - Length tolerance for ⌀25 x 300 mm: +/- 0.01 mm - Dimensions (LxWxH): 430 x 360 x 500 mm - Weight: 109 kg - YouTube video link:

Stanje: rabljeno, Leto izdelave: 1986, Grinding wheel diameter 300 mm Table length 0 mm Giodpfx Agst Hwzvewsp Table width mm Total power requirement 11 kW Machine weight approx. t Space requirement approx. m Cut-off machine for hard materials Cut-off machine, hand lever, coolant system, 11 kW

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, trajanje garancije: 6 meseci, skupna širina: 360 mm, skupna dolžina: 1.020 mm, skupna višina: 500 mm, vrsta vhodnega toka: Klimatska naprava, premer obdelovanca (maks.): 25 mm, skupna masa: 92 kg, vhodna napetost: 400 V, Clamping, separating, and face grinding in one motion The machine features two parallel-operating grinding spindles: one for cutting off and one for precision face grinding to final dimension. The desired workpiece length is set precisely to 0.01 mm on the scale. Opening the prism clamp: Move the center lever to the right and insert the workpiece Closing the prism clamp: Move the lever to the left Cutting: Move left lever upward Finishing: Move left lever downward Opening the prism clamp: Move the lever to the center and right; remove finished workpiece. The grinding wheel can be adjusted and dressed at any time without losing the set dimension. Version equipped with motor protection, cover switch, and restart protection Operation without chuck hand: The machine is supplied with two stop rulers (300 & 600 mm): Max. finished workpiece length: 300 mm / 600 mm Min. finished workpiece length: 54 mm Workpiece diameter: Ø1-25 mm Operation with chuck hand (not included in accessories): Max. finished workpiece length: 60 mm Min. finished workpiece length: 12.5 mm Workpiece diameter: Ø1-10 mm Ejector with cylindrical head: max. size 6 Max. pre-machining workpiece overlength: 195 mm Length tolerance: +/-0.01 mm Squareness tolerance: +/-0.01 mm Weight: 92 kg Dimensions without ruler (WxDxH): 430x360x500 mm Dimensions with ruler (WxDxH): 1020x360x500 mm Height with open cover: 950 mm Cut-off wheel, non-woven: SGA60P6BR1, Ø180x1xØ31.75 mm Cup wheel: PA46, Ø100x50x10xØ20 mm Location: Austria / Vienna Condition: New, stock machine, 6 months warranty. Including the following accessories: • 1 pc. cut-off wheel SGA60P6BR1 with flange, pre-installed • 1 pc. cup wheel PA46 with flange, pre-installed • 1 pc. dressing diamond, pre-installed • 1 pc. belt, pre-installed • 2 pcs. Y-face spanner wrenches • 1 pc. each Allen key 3 mm, 5 mm, 3/16'' • 1 pc. pin wrench 6 mm • 1 pc. ruler 300 mm • 1 pc. ruler 600 mm • 1 pc. micrometer screw with scale sleeve • 1 pc. cleaning brush • 1 pc. lever Godpfx Ageid Iymjwsip • 1 pc. operating manual, German • 1 pc. wooden transport box

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1992, Precision cutting-to-length machine Manufacturer: DEGEN Model: TAM 25/600 Year of manufacture: 1992 – partially overhauled, newly repainted, RAL7035 light grey / RAL7012 basalt grey Machine no.: 1017 with warranty Geometric acceptance with test protocol Accessories: - Coolant system Gjdpfx Aehfwfaogwoip - Operating manual - Used, as seen -

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, The function The TAM 25/600 quickly and precisely separates and cuts ejector pins, ejector sleeves, and punching dies to length. Workpieces with diameters from 0.5 to 25 mm, made from tool steel or carbide, can be processed. Simply place the workpiece into the quick-clamping prism, set the desired finished dimension, and separate and cut to length in a single operation. An additional clamp for extremely thin, short, or shouldered pins is available on request. Your advantages: • User-friendly quick-clamping system • Fast insertion and removal of workpieces • Cutting and length adjustment in a single operation • Additional clamp for thin, short, and shouldered pins After separation, the work table is locked in the final position, the length is measured exactly, and ground to final dimension with the integrated micrometer feed. Wear on the cup wheel is offset by advancing the grinding spindle. Dressing of the wheel is performed automatically via the integrated diamond tool. CBN or diamond wheels are available as optional equipment for the TAM 25/600. Gjdpfxsfig I Ne Agweip Your advantages: • Precise adjustment of the workpiece via micrometer screw • Integrated diamond dresser for cup wheel • Integrated coolant/lubricant system prevents overheating of the workpiece • Adjustable grinding spindle keeps the cutting edge of the cup wheel always at the zero position Precision Drive motor: 1.1 kW Cutting spindle speed: 11,000 rpm Grinding spindle speed: 4,400 rpm Workpiece diameter: 0.5 – 25 mm Workpiece length (with stop): max. 600 mm Cutting disc: 125 x 1.0 x 20 mm Grinding wheel: 100 x 50 x 20 mm Footprint: 700 x 500 mm Weight (net): 135 kg The machine is in like-new technical and visual condition. Any parts no longer in perfect condition are replaced by us. All bearings and screws have been replaced and all components have been newly painted or blued. Delivery time: 3 months.

Stanje: novo, Cross and longitudinal grinding machine Manufacturer: HERZOG Model: LY 600 400V configuration Length tolerance: ± 0.01 mm Angular accuracy: ± 0.01 mm Diameter range: 1 – 25 mm Dimensions: 430 x 360 x 500 mm Giodpfsd Idb Isx Agwsp Weight: 87 kg Accessories: - Measuring stop with micrometer screw - Cup wheel and cutting disc - Operating manual

Stanje: dober (rabljeno), Double-ended bench grinder, double-wheel grinding machine, pedestal grinder, pedestal bench grinder Gedpfx Aeb A Rctjgwoip - Motor power: 0.5 kW - Speed: 3200/5200 rpm - Grinding wheels: max. Ø 180 mm - Operating voltage: 380 Volt - Dimensions: 500/500/H1550 mm - Weight: 170 kg