Anton Obojes

Stanje: zelo dobro (rabljeno), KATALOŠKA ŠTEVILKA 7729 TEHNIČNI PODATKI Oprema: - krožnik za trak - rezervoar za lepilo (granulat) - podajalnik traku - giljotina – predhodno rezanje robnega traku - dva pritisna valja - minimalna širina obdelovanca 50 mm - debelina obdelovanca 10-40 mm - minimalni notranji polmer 50 mm - lepljenje pod kotom z robnim trakom debeline 1 mm, 0-45° - debelina robnega traku 0,3-3 mm - električni pomik Kodpfxsya Hnas Af Todg - skupna moč 2 kW - tlak stisnjenega zraka 6-7 bar - dimenzije d/š/v 1700x1300x1550 mm - teža 310 kg PREDNOSTI – slovenska proizvodnja – nelakirana – DTR dokumentacija – zelo dobro ohranjena – rabljeni robni lepilni stroj Cena brez DDV: 6500 PLN Cena brez DDV: 1550 EUR glede na tečaj 4,2 EUR (Cene se lahko spreminjajo glede na večja nihanja tečajev)

Stanje: rabljeno, Leto izdelave: 2015, vrsta nastavitve višine: mehanski, - Year of manufacture: 2015 - Single owner. EQUIPMENT: Electrical Equipment - Supply voltage: 3x 400 V - Supply frequency: 50 Hz Workpiece Dimensions - Edge thickness: 0.4 – 3.0 mm - Workpiece thickness: 10 – 45 mm - Minimum workpiece width: 70 mm - Minimum workpiece length: 210 mm Units / Aggregates - Edge feed from roll with feeding plate - Edge feed for thicknesses from 0.4–3 mm, manual feeding of individual strips - Guillotine shears for cutting edge band from roll, up to 3 mm thickness - Gluing unit for granulated hot-melt adhesive, Teflon-coated glue pot - Spring-loaded pressure unit; 1 straight pressure roller and 1 pressure fixing roller - Trimming saw unit: 9,000 rpm, 0.18 kW, HW saw blades Z=16, Ø 80 mm - Multifunctional milling unit: 12,000 rpm, 0.22 kW, for round and straight edge milling, chamfering - Corner rounding scraper unit, mechanically activated, R=2 mm - Flat scraper unit, mechanically activated Operation: - Control panel with LCD display and keypad - Quick-change adjustment system for units, tool-free Feed: - Workpiece feed by caterpillar track on chain - Feed speed: 8 m/min - Extendable support General Data: - Extraction port Ø 120 mm Overall Dimensions: - Length: 2000 mm - Width: 800 mm - Height: 1500 mm Kodpfxoya Ethe Af Tjdg - Weight: 360 kg At customer’s request: - The machine processes PVC and ABS edges 0.5 – 3 mm - Edgebanding speed approx. 7 m/min - Milling top and bottom with chamfer or R2 radius - Flat scraper - 1.2 kg Teflon glue pot - Pre-cutting guillotine - Edge cutting by two saw units - Fast calibration system by placing an edge strip in the correct clamp - The machine has been regularly serviced, lubricated and cleaned, ensuring excellent technical condition. - The ideal solution for demanding carpentry workshops and production facilities.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, SCM avtomatski lepilni stroj za robove, tip K 201, CE znaka, popolnoma opremljen s krmilno konzolo, območje lepljenja za obdelovance do 3 mm debeline materiala in 45 mm širine, ojačano ločevanje valjev do 3 mm, trakovni magazin, vodilo obdelovanca z verigo z zgornjim pritiskom valjev, centralna nastavitev zgornjega pritiska, frekvenčni pretvornik, HF rezalna enota, HF radijska rezkalna enota, motorji s hitrim menjavnim sistemom, protihrupni pokrov, digitalna regulacija temperature lepila, podtalni rezervoar za lepilo, nanos lepila preko valjčnega dozirnega sistema, izvlečna tirnica z valji, centralni odsesovalni priključek. Kodpfx Afsyath He Tjdg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, obratovalne ure: 19.714 h, Ta IMA Advantage 550 je bila izdelana leta 2010. Rabljeni enostranski robni lepilni stroj z agregatom za spajanje, grelnikom, EVA lepilnim agregatom in magazinom za robni material v roli. Opremljen je z enoto za rezanje, zgornjo/spodnjo rezkalno enoto za poravnavo in profilnim strgalom. Stroj ponuja podajalno hitrost 20 m/min, kar je idealno za učinkovito proizvodnjo. Izkoristite priložnost za nakup tega robnega lepilnega stroja IMA Advantage 550. Za več informacij nas kontaktirajte. Dodatna oprema • Enota za spajanje robov (fugenschneider) • Grelnik • EVA lepilni agregat • Magazinska enota za robne trakove v roli • Rezalna enota • Zgornje/spodnje poravnalna rezkalna enota • MFA z 2 motorjema za radij r2, servo krmiljenje • Profilno strgalo • Površinski strgalnik • Polirni agregat (schwabbelaggregat) Prednosti stroja Kdsdpfoyaqbwsx Af Teg Tehnične prednosti stroja • Podajalna hitrost: 20 m/min Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2013, Stroj za lepljenje robov HOMAG KAL210 Ambition 2262 je bil izdelan leta 2013. Dolžina stroja znaša 7755 mm, podpira debeline robov od 0,4 do 6 mm in debeline obdelovancev od 8 do 60 mm. S podajalno hitrostjo 18–25 m/min je idealen za učinkovito obdelavo robov. Za več informacij nas kontaktirajte. Prednosti stroja Tehnične prednosti stroja • Dolžina stroja: 7755 mm • Debelina obdelovanca: 8–60 mm • Teža (kg): 4500 Ksdpfxsyaqbdo Af Tsdg • Število samodejno povratnih profilov: faza + 1 radij / podajalna hitrost: 18–25 m/min / debelina roba: 0,4–6 mm • Možen je ogled. Stroj je v dobrem stanju in je bil uporabljen le v eni izmeni.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2011, Ta robna lepilka BRANDT Optimat KDF 650 C je bila izdelana leta 2011. Dolžina stroja je 5760 mm, delovna višina 950 mm, zmožna je obdelovati debeline obdelovancev od 8 do 60 mm in debeline robnega materiala od 0,4 do 12 mm. Variabilna podajalna hitrost znaša 8 do 18 m/min. Teža stroja je 2600 kg. Razmislite o možnosti nakupa te robne lepilke BRANDT Optimat KDF 650 C. Za več podrobnosti o tem stroju nas kontaktirajte. Ksdpfxsyaqa He Af Todg Prednosti stroja Tehnične prednosti stroja • Dimenzije stroja (d x š x v): 5760 mm x 1555 mm x 2300 mm / teža (kg): 2600 • Debelina obdelovanca: 8 – 60 mm / debelina robnega materiala: 0,4 – 12 mm / hitrost podajanja: variabilna 8 – 18 m/min (opcijsko 8 – 20 m/min) • Možna preizkusna vožnja / stroj je v dobrem stanju / uporabljal se je le v eni izmeni

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, This BRANDT Optimat KDF 550 was manufactured in 2008. It has a machine length of 5,860 mm, a power requirement of 11.5 kW, and weighs 2,600 kg. With a workpiece thickness of 8 to 60 mm and an edge thickness of 0.4 to 8 mm, it is ideal for precise edge banding operations. Check the availability of this BRANDT Optimat KDF 550 edge banding machine. Contact us for further information. Machine Advantages Technical Specifications and Machine Benefits Kodpfx Afjyaqags Tedg • Power requirement: 11.5 kW / weight: 2,600 kg / machine dimensions (LxWxH): 5,860 mm x 1,560 mm x 2,300 mm • Feed speed: 11 m/min (optionally 14 m/min) • Workpiece thickness: 8 – 60 mm / edge thickness: 0.4 – 8 mm / working height: 950 mm • Electrical connection: 400 V – 3 phase – 50 Hz / pneumatic pressure: 6 bar / noise emission level: 80... 87 dB(A) • Extraction diameter: 1 × 120 mm / 2 × 100 mm / roller spacing: max. 3.0 × 45 mm / 0.8 × 65 mm • Inspection possible. The machine is in good condition and was only used in single-shift operation.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, skupna masa: 600 kg, This VITAP Eclipse edge banding machine was manufactured in 2018. It is ideal for precise edge processing and ensures consistent performance on woodworking projects. Take advantage of the opportunity to purchase this VITAP Eclipse edge bander. Contact us for further information. Additional Equipment • Glue Pot Capacity: Maximum glue pot capacity 1 kg (with optional 2 kg glue pot) • Gluing Unit: Edge banding on open and closed curved panels with small and large dimensions / 1 glue roller / 2 rollers for copying panel shapes / 2 800-watt heating elements with electronic temperature control / Manual glue quantity adjustment / Glue temperature setting / Automatic edge trimming system • PLC System: For setting the dimensions and trimming the edge, with encoder reading • Laser: Assists with cut programming for closed parts, eliminating the need to measure parts • Workpiece Feed: Automatic part feed on/off • Working Area: For banding and trimming small parts • Edging Magazine: Roller edge magazine with deflection roller system • Milling Unit: 2 high-frequency motors 0.5 kW with a speed of 15,000 rpm / On/Off milling unit / Pneumatic lifting of both motors / 2 brazed cutters R=3 Z=6 • Articulated Arm: Complete with workpiece lowering table for squaring and trimming large parts Machine Advantages Kdjdpfx Ajyap Trjf Tog Qualitative Advantages • Facilitates efficient squaring and trimming of both small and large parts • Complies with CE standards Technical Advantages • Machine dimensions (LxWxH): 2000 x 2000 x 1700 mm (with arms closed); 3400 x 3400 x 1700 mm (with arms open)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Cette HOMAG Optimat KL 78/A20/S2/Z a été fabriquée en 2001. Cette plaqueuse de chants unilatérale et robuste est équipée de nombreux dispositifs, notamment des unités de fraisage de joints, un pré-fondeur de colle, des zones de pression, des unités de coupe en bout et de fraisage affleurant. Elle dispose également d'une unité de fraisage de contours et de rainures moderne, de racleurs de profil et de surface ainsi que d'une unité de polissage, le tout piloté par l'unité Homatic NC 21. Contactez-nous pour plus d'informations sur cette machine. Kdsdpfxeyap Tlo Af Tsg Avantages de la machine Avantages techniques de la machine • Plaqueuse de chants unilatérale avec retour des pièces • Fraisage des joints • Station d'encollage avec pré-fondeur de colle • Zone de pression • Unité de coupe • Coupe affleurante • Unité de fraisage de contours FK 13 avec changeur automatique d'outils 8 positions • Unité de fraisage de rainures • Racleur de profil // racleur de surface • Unité de polissage Informations additionnelles Machine toujours sous tension

Stanje: zelo dobro (rabljeno), Stroj za lepljenje robov HOLZHER sprint 1329 Dobro opremljen, možnost preverjanja pred nakupom Avtomatsko NC upravljanje s konzole Tekočine Predhodni rezkalniki Nanašanje lepila, sistem GLU JET Pnevmatska predgiljotina Stiskalni valji Končne rezalne žage Tekočine Rezkalniki zgoraj-spodaj R1-R2 Obdelava vogalov na 2 agregatih Kdodpfx Ajyankcef Teg Profilni ciklinski rezkalnik R1-R2 Ravni ciklinski rezkalnik Tekočine Polirni stroj Dokumentacija Podajalna hitrost max 18 m/min Maks. debelina dodatka: 8 mm Maks. debelina traku v roli: 3 mm Maks. višina lepljenja: 60 mm Dolžina stroja 670 cm, s stojalom 755 cm Dimenzije stojala 180 x 60 cm Stroj preverjen in pripravljen za testiranje.

Stanje: rabljeno, Leto izdelave: 1997, Used machine Year of manufacture: 1997 Condition: well-maintained Features and technical specifications: Machine equipped with PLC control Feed rate: 12/16 m/min Edge infeed for roll and strip material, automatic 1901 Glue application cartridge 1906 with sensor nozzle Pressure unit pneumatic, motorized adjustment to edge thickness 1926 End trimming unit, twin-motor, pneumatically tiltable 1918 Fixed milling unit up to 30 mm 1962 Milling unit MOT 5, multifunctional for flush, radius, and bevel milling 1966 Radius scraper 1927 Corner copying unit 1983 Surface scraper 1964 Buffing unit 1944 Air-blow nozzles Technical data: Workpiece thickness min./max.: 6/60 mm Kodpeyamcwofx Af Tedg Workpiece width min.: 60 mm Workpiece length min.: 140 mm Edging material thickness max.: 13 mm Weight: 1350 kg Machine dimensions: 5850 x 1000 x 1750 mm Location: Röllbach Availability: short-term

Stanje: zelo dobro (rabljeno), stroj za lepljenje robov, zelo dobro vzdrževan, deluje zelo dobro, lepilo je v granulatu, letnik izdelave 2014. Idealen za majhne prostore, ima naslednje funkcije: predrezkanje, odrezovanje koncev, zgornje in spodnje rezkanje z radijem, radijsko rezkanje, ravno rezkanje. Kedpfx Afeyah Tde Tedg

Stanje: zelo dobro (rabljeno), stroj za lepljenje robov, zelo dobro vzdrževan, deluje zelo dobro, lepilo je v granulatu, letnik izdelave 2014. Idealen za majhne prostore, ima naslednje funkcije: predrezkanje, odrezovanje koncev, zgornje in spodnje rezkanje z radijem, radijsko rezkanje, ravno rezkanje. Kjdpfoyah S Tsx Af Tjdg

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, Stroj za lepljenje robov SCM Olimpic K560 je bil izdelan leta 2019. Opremljen je z 7" zaslonom na dotik z elektronskim upravljanjem Touch 7, podpira debeline robnih trakov od 0,4 do 3 mm in obdela plošče debeline od 8 do 60 mm. Stroj omogoča podajalno hitrost 12–14 m/min in ima sistem za lepljenje robov s toplim zrakom. Za dodatne informacije nas kontaktirajte. • Stanje stroja: dobro ohranjeno • 7" zaslon na dotik (16:9) z elektronskim upravljanjem Touch 7 • Debelina robnega traku: 0,4 – 3 mm Kedpfxeyabq Aj Af Tjdg • Debelina plošče: 8 – 60 mm • Minimalna dolžina plošče: 140 mm • Minimalna širina plošče: 100 mm • Podajalna hitrost: 12 – 14 m/min • Sistem za lepljenje robov s toplim zrakom

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2019, This SCM E10 edge banding machine was manufactured in 2019. It offers an edge thickness capacity of 0.4 to 3 mm and can process panels with heights from 8 to 80 mm. The machine supports minimum panel dimensions of 50 mm width and 210 mm length. It operates at two feed speeds of 4 and 8 m/min, with a maximum operating temperature range of 140 to 220 °C. The installed motor power is 3.5 kW. Contact us for further information about this machine. • Edge thickness capacity: 0.4 to 3 mm • Edge thickness with shear unit: • (80 mm height) 0.4 to 1.5 mm • (50 mm height) 0.4 to 2.5 mm • (45 mm height) 0.4 to 3 mm • Panel height capacity: 8 to 80 mm • Edge height: 10 to 83 mm • Minimum panel width: 50 mm Kjdpfx Ajyabmkof Todg • Minimum panel length: 210 mm • Minimum inner radius with 0.4 mm edge banding: • Concave: 25 mm • Convex: 5 mm • Feed speeds: 4 and 8 m/min • Maximum operating temperature: 140 to 220 °C • Installed motor power: 3.5 kW • Overall dimensions: 39.37" x 29.13" x 43.3"

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, This IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine was manufactured in 2012. It features a robust automatic edge banding and finishing system, including a workpiece return system for increased productivity. It is capable of processing edge materials from 0.3 mm to 3 mm and workpiece thicknesses up to 60 mm. Equipped with a pneumatic quick-release system and electronic temperature control for precise glue application. Consider purchasing this IMA Novimat Concept / I / G80 / 440 / R3 edge banding machine. Contact us for further information. Additional Equipment Kdedpex U U D Tefx Af Tog • Hinged milling unit: 2 motors, each 4.0 kW, 8800 rpm • Heating unit: Preheating of workpiece edges up to 60 mm • Glue application: Processing of edges up to 3 mm • End trimming unit: 2 motors, 660 kW • Additional units: Milling, multi-profile milling, contour milling, multi-profile scraper and scraper; buffing unit • Automatic Quickmelt hot melt glue feed • Board return system with powered roller conveyors, cross conveyor, belt conveyor, angle transfer, air cushion tables, and safety fence Machine Advantages Technical Advantages • Minimum workpiece length: 150 mm / minimum workpiece width: 65 mm / minimum workpiece thickness: 8 mm / maximum workpiece thickness: 60 mm / smallest workpiece: 150 mm x 150 mm or 65 mm x 300 mm Additional Information This machine is configured for efficient edge banding and finishing, featuring robust functions and support for various workpiece sizes. It is immediately available for production use.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Advantage 310 edge banding machine was manufactured in 2010. It processes workpieces with a length of 150 mm, a width of 65 mm, and a thickness of up to 60 mm. It is equipped for various materials, including particleboard and MDF panels, with melamine, paper, foil, or veneer edges. The equipment includes a gluing unit, a cutting unit, and a buffing unit, which enhance the finishing quality. Take advantage of this opportunity to purchase the IMA Advantage 310 edge banding machine. Contact us for further information about this machine. Machine Benefits Technical Machine Advantages • Minimum workpiece length: 150 mm • Minimum workpiece width: 65 mm (with a maximum thickness of 25 mm), 150 mm • Workpiece thickness: min. 8 mm, 12 mm with profile scrapers; max. 40 mm (mfa 08346), 60 mm (skf) • Smallest workpiece: 65 x 300 mm / 150 x 150 x 19 mm • Edge machining allowance per workpiece edge: 0 - 5 mm • Workpiece shape: rectangular • Material: particleboard, MDF • Surface material: direct coating (melamine resin paper), paper, foil, veneer Additional Information Edging Material Roll material without foil: Paper edges & plastic edges: 0.3 - 3.0 mm Veneer edges: 0.5 - 3.0 mm Max. edge cross-section: 150 - 180 mm² Prefabricated edge strips: Strips: 3.0 - 8.0 mm Max. strip cross-section: 520 mm² Edge height: Min. 12 mm, max. 65 mm Max. upper edge overhang: 2 mm Edge profiles: Paper edge: Approx. 0.4 mm, 15° chamfer Plastic edge up to 3.0 mm, depending on radius tool Kedpfxex U U Dto Af Tedg Milling strips flush up to 8 mm Machine Constant workpiece projection from chain track: 35 mm + edge thickness Max. cut cross-section: 520 mm² Passage width: Min. 65 mm (with 35 mm projection) Min. workpiece length in feed direction: 150 mm Base height (top edge of chain track): 940 mm Unit side: Left in feed direction Pneumatic connection: Approx. 7 - 8 bar Jointing unit 08.379 and air nozzle 2 motors, each 4 kW, 9000 rpm Gluing unit 283.1513 Glue reservoir 0.8 l, 60 mm high Suitable for hot-melt or PUR adhesive With individual roller/strip magazine, roller diameter 800 mm 3 main pressure rollers and 3 auxiliary pressure rollers Cutting unit 08.415 Pneumatically swiveling to 0° or 8° 2 motors, 12,000 rpm 2 HM cross-cut saw blades Copy milling unit SKF-L 4 motors, 12,000 rpm Profile length in feed direction: max. approx. 50 mm Workpiece thickness: max. 60 mm Working speed: max. approx. 20 m/min Distance between 2 workpieces: min. approx. 400 mm Profile drawknife 08.519 For post-scraping of an upper and lower milled quarter-circle profile Self-tracing drawknife unit 08.521 For removing hot-melt adhesive residue in the edge area of the top and bottom of workpieces Buffing unit 08.617-2 Upper and lower motor: 180 W, 1400 rpm 2 polishing wheels 50 x 160 x 19 mm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2014, Ta HOLZHER ARCUS 1334 FV2 je bila izdelana leta 2014. Gre za robusten robni lepilni stroj z enoto za lepljenje, enoto za odrezovanje in enoto za poravnavno rezkanje. Obdeluje največjo debelino robnega traku 8 mm in ima zgornji pasovni pritisk. Pnevmatski nadzor povečuje funkcionalnost stroja. Izkoristite priložnost za nakup tega robnega lepilnega stroja HOLZHER ARCUS 1334 FV2. Kontaktirajte nas za več informacij. Kedpfxsx U Utbo Af Todg Dodatna oprema • Leplilna enota • Enota za odrezovanje • Enota za poravnavno rezkanje Prednosti stroja Tehnične prednosti stroja: • Največja debelina robnega traku: 8 mm • Dolžina stroja: 6760 mm • Zgornji pasovni pritisk: da Dodatne informacije Stroj je še vedno priključen na elektriko.

Stanje: rabljeno, Holz Her STREAMER 1057 XL FÜ + PU Debelina robnega traku 0,4 - 6 mm Moderna upravljalna enota s preklopnim stikalom za nastavitev agregatov Popolnoma avtomatski magazin za robni trak v roli ali v traku Lepilna postaja GLU-JET za kartuše + PU lepljenje Nanos lepila s tehnologijo šob Tipalna šoba Višina obdelovanca 6 - 60 mm avtomatska nastavitev višine lepilnega nanosa Visokokakovostna 3-valjna pritisna enota, 1 valj motoriziran Odkapni agregat pnevmatski za rolo in trak do 6 mm debeline S pnevmatskim nastavljanjem naklona žage od 0° do 10° Rezkalni agregat, poravnalno rezkanje 6 mm, radijsko rezkanje - posnemanje robov - 15° Agregat za kopiranje vogalov – do 3 mm debeline robnega traku Rezkalni agregat s strgalnimi noži za posnemanje in radije z 2 nosilcema strgala Kedpfx Ajx Ux U Aof Tjdg Agregat za površinske strgala – finiš Polirni agregat Razpršilna enota na vstopu in izstopu ter za PU Stroj z vsemi obdelovalnimi orodji Stroj je DELAVNIŠKO PREVERJEN Prva dostava 2016 Iz zaloge Lieboch

Stanje: rabljeno, Leto izdelave: 2010, obratovalne ure: 24.804 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-200-95-8810, Imamo popolnoma delujoč enostranski lepilni avtomat za robove s povratnim transporterjem, stroj je zelo visoke specifikacije. Stroj je trenutno v uporabi, zato si ga lahko ogledate med delovanjem. Kodpfx Aox Upuaof Tsdg

Stanje: rabljeno, Leto izdelave: 2017, Used machine Year of manufacture: 2017 Features and technical specifications: - Base machine: Streamer 1057XL 200-400 V / 50 Hz, with manual pressure bridge adjustment - Extendable workpiece support XL: spacing 600 mm - Jointing unit: FG201 with 2 milling heads for jointing the panel edge - Diamond cutter: diameter 70 x 64 x 30 mm, Z2 + 2, left-hand rotation, Air Stream System - Diamond cutter: diameter 70 x 64 x 30 mm, Z2 + 2, right-hand rotation, Air Stream System - Edge feeder: 1903, automatic feed for rolls and strips - Glue application system: Glu Jet GJ301 2.3 kW / 50 Hz, automatic adhesive height adjustment (sensing nozzle) - Automatic reloading function - Pressure unit: 1912-3, pneumatic, first roller driven, with pneumatic dipping control - End trimming unit: 1918, 60 mm, pneumatic, end trimming 0-10 degrees, pneumatic adjustment - Extraction hoods: for end trimming unit 1918 - Multifunctional milling unit: FR 201, flush and radius trimming, including DIA cutters - Corner copying unit: 1832, 1 x 0.35 kW / 200 Hz / 12000 rpm, corner copying function up to 3 mm edge thickness - Diamond cutter: diameter 53 x 10 x 16 mm, Z = 3, R = 2 mm, CM technology (Leuco system), integrated chip extraction, for profile milling unit 1832 - Scraper unit: 1929 - Chip box complete: diameter 120 mm, for 1929 + 1964 + FK70 - HW reversible inserts: for scraper holder R = 2.0 mm, 2 pcs required - Surface scraper: FK 701 for removing glue residue for a clean glue joint - Spray unit: TR 201 for infeed and outfeed areas - Buffing unit: 1940, 2 x 0.09 kW / 50-60 Hz / 1400 rpm, for post-cleaning and edge polishing, with 2 textile discs, tiltable 0-5 degrees - Minimum workpiece length: 160 mm Kdsdjx Twh Eopfx Af Tsg - Workpiece thickness: 6-45 / 60 mm - Edge thickness: 0.4-3 / 6 mm - Feed speed: 10 m/min Length: 4,630 mm Weight: approx. 1,440 kg Availability: short notice Location: 65439 Flörsheim

Stanje: rabljeno, Leto izdelave: 2012, Base machine Olimpic K 800 "T-ERL" (47) 1 pc BASIC EQUIPMENT: - Ribbed steel machine base with tube reinforcements for optimal support of working units - Swiveling control panel - Support roller track with ball-bushing guidance along the entire machine length - Protective and noise-reducing cover with separate doors between the gluing and finishing units - Extraction nozzles mounted on the noise-reduction cover - Electrical system with lockable main switch - Emergency stop buttons at infeed and outfeed - Inverter for electric spindles PANEL FEED SYSTEM: - Feed chain with rubber sliding shoes, featuring a high coefficient of friction, mounted on a 1 ¼” industrial chain - The chain runs on two guides made from hardened and ground steel, one round and one flat, to ensure straight-line feeding and prevent lateral displacement - Automatic central lubrication of the feed chain - The upper pressure beam is made of thick-walled steel construction, complete with double rows of ball-bearing mounted rollers and protective device for the pressure rollers - Manual lifting of the pressure system with automatic positioning of the working units upon change of panel thickness - Mechanical digital indicator for monitoring the selected panel thickness CONTROL "ORION 100": Control unit complete with PLC, allowing fast, simple, and error-free execution of customized machining programs (max. 60 programs). Manages pneumatic positioning of units if available on the machine. (The control system does not include pneumatic positioners.) - Alphanumeric keypad and display - Function keys for quick actuation of working units - Ambient temperature range: 0 to +45°C MAIN FUNCTIONS: - Control of working units and automatic activation of motors - Monitoring and regulation of glue pot temperature - Selection for longitudinal and transverse processing without program change - Simple, guided diagnostics for easy troubleshooting - Statistics for absolute data and individual operations: quantity, edge band usage, total chain feed distance - Unit selectable in mm or inches Technical Data OLIMPIC K800 T-ER L: Edge thickness: 0.4 to 8 mm Max. edge band thickness (roll): 3 mm Feed speed: 12/18 m/min Working height: 8 to 60 mm Kdsdpfx Afsx Twdto Tsg Max. edge section dimensions: 135 mm² Turntable diameter: 780 mm Max. overhang compared to panel thickness: 4 (2+2) mm Min. panel width (with 210 mm min. length): 55 mm Min. panel length (with 100 mm min. width) - with strip or roll edges max. 3 mm: 140 mm - with solid wood edges: 200 mm Min. distance between consecutive panels at m/min 11 (16): 750 (850) Standard Equipment: - Pre-milling unit at infeed RT-E - Gluing station VC-800 - End trimming unit KSEL - Flush trimming unit, tiltable RI/800 - Corner rounding unit ROUND K - Scraper unit RAS-V - ½ free space for surface scraper - 1 S free space for surface scraper, universal cutter, or buffing unit - 1 F free space for air nozzle unit Complies with European safety regulations (C.E. mark) 1 pc Voltage 400 V EU 1 pc Frequency 50 Hz 1 pc "Autoset" for models ER2, T-ERS and T-ERL Enables all necessary adjustments for each processing change from the control panel. Includes: - Timed pressure unit - Pneumatic and independent swiveling of end saw blades (front/back) - Pneumatic remote adjustment for the flush trimming unit RI/800

Stanje: dober (rabljeno), Leto izdelave: 1998, Debelina robnega traku: od 0,4 do 5 mm Debelina obdelovanca: od 10 do 50 mm Skupna dolžina: 2730 mm Teža: 720 kg - Lepljenje robnega traku - Obojestransko kapanje - Poravnano rezkanje - Hitrogrelni rezervoar s časom segrevanja 5 do 6 minut Kdodpfxjx Tu Rdj Af Tsg - Orodje za odrezovanje materiala v roli - Digitalno upravljanje temperature - Širina stroja: 825 mm

Stanje: rabljeno, Leto izdelave: 2019, obratovalne ure: 3.488 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 0-261-71-2252, vrsta vhodnega toka: trifazni, vhodna napetost: 400 V, vhodni tok: 22 A, vhodna frekvenca: 50 Hz, Ponujamo rabljen lepilni stroj HOMAG EDGETEQ S-300, letnik 2019. Tip: EDGETEQ S-300 Podtip: OPTIMAT KDF 440 C Številka stroja: 0-261-71-2252 Električna shema: 0-261-71-2252 Letnik izdelave: 2019 Napajalna napetost: 400Y/230 V Faze: 3-fazni Frekvenca: 50 Hz Največji delovni tok: 22 A Nazivna vrednost varovalke: 25 A Nazivni tok kratkega stika: 5 kA rms simetrično Krmilna napetost: 24 V Tip ohišja: NEMA 1 Kodpfx Aox Tt D Nof Tedg Največji tok motorja: 5,7 A Največji tok grelnika: 2,3 A Če imate kakršnakoli vprašanja ali potrebujete več informacij, nam pošljite sporočilo ali nas pokličite.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, največja debelina roba: 20 mm, širina obdelovanca (maks.): 60 mm, The machine has been serviced and is in excellent condition. It is immediately ready for operation! TECHNICAL DETAILS Edging thickness (glued): max. 20 mm Maximum glue height: 60 mm Maximum roll material thickness: 3 mm Workpiece width: min. 60 mm Maximum feed speed: up to 25 m/min Feed: continuous Electric height adjustment: available Pressure: top belt pressure Pre-heating zone: available Granulate glue application system: with pre-fabricated container Glue pot: changeable/variable Spray unit: available Pre-milling unit: available Trimming group: with 2 motors Milling stations: flush/radial/chamfer, 1 available Corner copying unit: with 2 motors Edge scraper: profile and planer Polishing unit: available Strip magazine: available Units: synchronized units with NC axis/axes Machine version: left side Quick-change units: available MACHINE DETAILS Remote control: PowerControl PC 22 Weight: 5,000 kg Machine length: 7,845 mm Standards: CE regulations Ksdpfex Tqgbox Af Tsdg EQUIPMENT - Special feature: with nesting capability - new chains - HOMAG feed system with 2 rollers - HOMAG A 20 glue application unit - HOMAG HL 84 - HOMAG FK 11 - HOMAG profile scraping cutter PN 10 - HOMAG FA 11 finishing unit