LJ-TECH MACHINES s.r.o.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2004, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 2.800 mm, največja debelina roba: 20 mm, model krmilnika: IMATRONIC MT, The machine has the following configuration: Unit 1: Milling unit with CNC positioning Unit 2: Milling unit with NC positioning, hotmelt adhesive tank, pre-press for hotmelt adhesive Edge banding + edge processing Unit 1: Edge banding machine (2 motors) Unit 2: Overlapping edge trimmer (2 motors) Unit 3: Edge trimmer (2 motors) Unit 4: Milling machine (1 motor) with automatic timer Unit 5: Milling machine (1 motor) with automatic timer Unit 6: Belt sander (1 motor) Unit 7: Belt sander (1 motor) Unit 8: Brushes (1 motor) TECHNICAL DETAILS Panel height min.: 8 mm Panel height max.: 60 mm Panel width min.: 280 mm Panel width max.: 2,800 mm Edge thickness min.: 0.4 mm Edge thickness max.: 20 mm Distance between feed chains: 1,000 mm MACHINE DETAILS Control system: IMATRONIC MT EQUIPMENT CE marking Gtodpfxsyttrxj Ab Esw The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2008, Funkcionalnost: nepreverjeno, višina obdelovanca (maks.): 90 mm, širina obdelovanca (maks.): 3.200 mm, dolžina obdelovanca (maks.): 3.200 mm, največja debelina roba: 3 mm, The machine has the following configuration: Number of panel sizing/milling units left side: 5 Milling unit (AS10) Gjdpfx Asyq Avhsb Estw Double fine millers, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (coarse) Fine trimming for bevel and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Panel height min.: 10 mm Panel height max.: 90 mm Panel length max.: 3,200 mm Panel width max.: 3,200 mm Edge thickness min.: 0.4 mm Edge thickness max.: 3 mm EQUIPMENT Conveyor chain with pushers Pressure with rubber belt Panel guiding rails, positioned by NC Edge roll magazine with 6 positions Hot-melt unit for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on overhead cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and utilization of the machine at the destination. External reference: 7685

Stanje: rabljeno, številka stroja/vozila: 008430, Pozicija 1: Nakladalec MAHROS + STEFANI-RUNNER + EVOLUTION Pozicija 2: Dvostranski robni lepilni stroj MAHROS + STEFANI-RUNNER + EVOLUTION Pozicija 3: Razkladalec MAHROS + STEFANI-RUNNER + EVOLUTION Gtedpfeyqxx Sox Ab Esw

Stanje: rabljeno, številka stroja/vozila: 008412, Tip nameščenega roba: tanek rob, debel rob Lepilni sistem: EVA Multifunkcijska enota: da Stroj za lepljenje robov: Stroj 1 in 2 Gtsdsyilxmepfx Ab Esw Največja podajalna hitrost: 40 m/min Delovne enote, desna stran: 11 kosov Delovne enote, leva stran: 11 kosov

Stanje: rabljeno, številka stroja/vozila: 007809, Vrsta nameščene obrobe: tanka obroba, močna obroba, masiven les Gjdpsyhbn Defx Ab Ejtw Sistem lepljenja: EVA, PUR Stroj za lepljenje robov: stroj 1 Največja širina plošče: 1200 mm Največja podajalna hitrost: 40 m/min Delovni agregati, desna stran: 8 kos Delovni agregati, leva stran: 8 kos

Stanje: rabljeno, številka stroja/vozila: 007354, Type of applied edge: thin edge, thick edge Glue system: EVA Multi-function unit: yes Edgebander: Machine 1 & 2 Max. panel width: 240 mm Max. feed speed: 40 m/min Working units, right side: 9 units Gedpjyg Edasfx Ab Estw Working units, left side: 9 units

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, This HOMAG KFL 526 / C was manufactured in 2006. The robust double-sided edge banding machine processes workpiece thicknesses from 12 to 40 mm and formats up to 2500 x 1200 mm. The equipment includes a gluing unit, a profile milling unit, and a finishing unit for precise edge processing. Ideal for efficient edge banding at speeds of up to 35 m/min. Contact us for more information about this machine. Additional Equipment • Top/bottom separating agent spraying device / Double hogger unit longitudinal/crosswise: 6.6 kW with electro-pneumatic control / Gluing unit A3 - 2 rollers / Profile milling unit FF12 top/bottom with motors at 12,000 rpm / Finishing unit FA11 top/bottom / Stepless stop cams with a maximum cam overhang of 25 mm / Standard milling unit SF20 6.6 kW / Rough trimming unit 0.55 kW • PUR Nordson melting station / tool set / extraction duct Gtodsx U Uzrepfx Ab Eow Machine advantages Technical machine advantages • Workpiece thickness: 12 - 40 mm / minimum workpiece size (LxW): 250 x 240 mm / maximum workpiece size (LxW): 2500 x 1200 mm / maximum workpiece weight: 50 kg • Edgebanding tape thickness: 0.4 - 3 mm / maximum edge cross-section (plastic): 135 mm² / maximum edge cross-section (veneer): 100 mm² / maximum roll diameter: 830 mm • Longitudinal processing speed: up to 35 m/min for thin edges up to 0.6 mm / up to 30 m/min for thick edges up to 3 mm • Cross processing speed: up to 30 m/min for panel dividing / up to 20 m/min for edge processing • Minimum workpiece spacing: 500 mm

Stanje: rabljeno, številka stroja/vozila: 008288, Pozicija 1: Nakladalnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 2: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Pozicija 3: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 4: Dvostranski robni lepilnik SCM-MAHROS - STEFANI - CELASCHI Gjdpfx Abjx Nv S Us Eotw Pozicija 5: Obratovalec plošč SCM-MAHROS - STEFANI - CELASCHI Pozicija 6: Sredinska žaga SCM-MAHROS - STEFANI - CELASCHI Pozicija 7: Razkladalnik SCM-MAHROS - STEFANI - CELASCHI

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 40 mm, dolžina obdelovanca (maks.): 2.500 mm, največja debelina roba: 3 mm, teža obdelovanca (maks.): 50 kg, največja hitrost vrtenja: 12.000 obr/min, TECHNICAL DETAILS Workpiece thickness: 12 - 40 mm Minimum workpiece size (L x W): 250 x 240 mm Maximum workpiece size (L x W): 2,500 x 1,200 mm Maximum workpiece weight: 50 kg Edging material (coil stock) - material thickness: 0.4 - 3 mm Maximum edge cross-section (plastic): 135 mm Maximum edge cross-section (veneer): 100 mm Gjdox Ezz Hjpfx Ab Eetw Maximum coil diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0.6 mm Longitudinal processing speed: up to 30 m/min for thick edge up to 3 mm Cross-processing speed: up to 30 m/min for panel sizing Cross-processing speed: up to 20 m/min for edge processing Minimum distance between workpieces: 500 mm MACHINE DETAILS Connected load: 6.6 kW (double planer longitudinal/cross) Standard milling unit: 6.6 kW EQUIPMENT Top/bottom separation agent spraying unit A3 gluing station with 2 rollers FF12 profile milling unit top/bottom, motors 12,000 rpm FA11 finishing unit top/bottom Continuously adjustable stop cams with max. cam stroke of 25 mm Pre-milling unit: 0.55 kW PUR OTT 2-kg melting station

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, Ta popolna IMA Combima linija za lepljenje robov z nakladalno postajo je bila izdelana leta 2002. Gre za robusten dvostranski stroj za lepljenje robov s širino obdelave od 235 do 2600 mm in dolžino od 200 do 2600 mm. Deluje s hitrostmi od 10 do 40 m/min, vključuje enoto za spajanje, polavtomatsko lepilno enoto z 6-mestnim magazinom robnega traku ter enote za ravno in profilno obrezovanje. Izkoristite priložnost za nakup te dvostranske lepilke IMA Combima. Za več informacij o stroju nas kontaktirajte. Vrste uporabe Lepljenje robov Gsdpfx Aox D Iq Nob Eetw

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2010, This IMA Combima/II/390/B/L12 was manufactured in 2010. The robust double-sided edge banding machine offers a maximum feed width of 3,300 mm and processes workpiece thicknesses up to 60 mm. Equipped with the precise ICOS OPEN control unit, it supports both coil and strip edging materials. Ideal for high-throughput environments requiring flexibility and reliability in edge processing. Contact us for further information about this machine. Additional Equipment • Hot-melt glue application unit: Single roll/strip magazine for coil material up to 3 mm and strips up to 12 mm • End trimming unit: 2 motors, each 660 W, pneumatically tiltable from 0° to +25° Machine Advantages Technical Machine Advantages • Min. infeed width: 244 mm (for longitudinal processing) • Max. feed width: 3,300 mm • Max. workpiece width (with chain conveyor extension): 1,300 mm • Min. workpiece thickness: 8 mm • Max. workpiece thickness: 45 mm (with copying function) / 60 mm (without copying function) • Max. feed width: 3,300 mm • Fixed reference side: left in feed direction Additional Information Scoring saw: 22 kW motor, 6,000 rpm, pneumatically controlled Rough milling unit: 80 kW motor, 6,000 rpm Double milling unit: 2 motors, each 45 kW, 9,000 rpm Flush milling unit: 2 motors, 1,850 W, 12,000 rpm Gsdpfex D I D Aox Ab Estw Multi-function unit: NC-controlled with 2 motors, automatic tool change for 4 profiles Buffing unit: 2 motors, each 180 W, 1,400 rpm Grooving unit: 45 kW motor, 9,000 rpm Control Unit ICOS OPEN: PC-based control system with integrated PLC and electronic path control, user-friendly interface with Windows standards

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1986, Stroj HOMAG KF62/6/A/25 je bil izdelan leta 1986. Vključuje vhodni valjčni transporter in dve dvostranski robilki, ki povečujeta produktivnost z učinkovitimi prehodi preko rotacijskih naprav. Idealno za učinkovite postopke lepljenja robnega traku. Za več informacij o tem stroju nas kontaktirajte. Vrste uporabe Obdelava robov Gsdpfsx D D R Eex Ab Ejtw

Stanje: rabljeno, številka stroja/vozila: 008269, Pozicija 1: Nakladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 2: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 3: Dvostranski robni lepilni stroj IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Pozicija 4: Obračalec plošč IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3 Gjdpfx Asx A Hggeb Ejtw Pozicija 5: Razkladalec IMA+BARGSTEDT+SAG-COMBIMA/CONCEPT/II/500/B/R3

Stanje: rabljeno, številka stroja/vozila: 008266, Tip pritrjene obrobe: tanka obroba, močna obroba Sistem lepljenja: EVA Multifunkcijska enota: da Stroj za obrobljanje robov: stroj 1 in 2 Največja širina panela: 3000 mm Največja hitrost pomika: 25 m/min Delovne enote, desna stran: 9 kos Gtsdjx A Hfiepfx Ab Eow Delovne enote, leva stran: 9 kos

Stanje: zelo dobro (rabljeno), Leto izdelave: 2021, 4-stranska FORMATIRNA in ROBNA LEPILNA LINIJA Dimenzije plošč: MIN. mm 195 x 250 x 60 / MAX. mm 1200 x 2500 x 60 Sestavljena iz naslednjih strojev: O12044a) Vhodna miza 'HOMAG' Mod. TBL 100/25/12/S z gnanim valji O12044b) 1. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 525/5/A3/15) Gedpfx Asx Aqbhob Estw O12044c) Obračalna postaja (90° vzdolžno-prečno) 'HOMAG' Mod. TDL 310 / 25 / 12 O12044d) 2. Dvostranski formatni in robni lepilni stroj 'HOMAG' Mod. EDGETEQ D-610 (KFL 526/6/A3/25)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, številka stroja/vozila: AH/003306, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 3.200 mm, hitrost pomika os X: 40 m/min, TEHNIČNE PODROBNOSTI Mobilna širina odprtine: 3.200 mm Maks. širina panela: 3.200 mm Min. višina panela: 10 mm Maks. višina panela: 60 mm Gtsdpfsxx N D Hjx Ab Esw Debelina robnega traku v roli, najmanj PVC-ABS: 0,3 mm Debelina robnega traku v roli, največ PVC-ABS: 3 mm Podajalna hitrost: 10 - 40 m/min Razdalja med vpotegnjenimi zatiči: 500 mm OPREMA Motoriziran pritiskalni gumijasti trak Nosilni transportni trak z vpotegnjenimi zatiči CNI krmiljenje v ločeni nadzorni omari Usmerjevalna enota z dvema motorjema (za vsako stran) Lepilna enota s predtalilcem za EVA lepilo Pritiskalni valji za robove Magazin za robove z dvema položajema Rezkalna enota z dvema motorjema Skupina za obrezovanje s prekrivanjem Stopničasta dodelovalna enota z dvema motorjema Obličevalna enota s 4 motorji Rezkalna enota nagibna 0-90° Enota za odstranjevanje robnih ostankov Krtačna skupina

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 50 mm, širina obdelovanca (maks.): 2.500 mm, dolžina obdelovanca (maks.): 200 mm, največja hitrost vrtenja: 18.000 obr/min, Oprema: CE označba, TECHNICAL DETAILS Maximum panel width: 2,500 mm Minimum panel width: 130 mm Maximum panel height: 50 mm Minimum panel height: 8 mm Maximum panel length: 200 mm Minimum panel length: 30 mm UNITS Format Cutting Unit Unit: Corrections automatic adjustment by time Motor power: 2.2 kW Max. speed: 6,000 rpm Magazine for coil Number of positions: 1 Gluing system Glue pot for polyurethane adhesive Prefeeder for polyurethane adhesive Prefeeder for polyurethane adhesive D4-e Edge pressure roller conveyor Number of pressure rollers: 4 Edge Processing Unit 1 Unit: Top-mounted router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge Processing Unit 2 Unit: Top-mounted router Number of motors: 1 Motor power: 0.7 kW Max. speed: 18,000 rpm Edge Processing Unit 3 Unit: Hot air blower Model: APPLICATORE DI FILM Motor power: 0.1 kW Edge Processing Unit 4 Unit: Brush Number of motors: 2 Edge Processing Unit 5 Unit: Top-mounted router Number of motors: 1 Edge Processing Unit 6 Unit: Top-mounted router Number of motors: 1 MACHINE DETAILS Total installed power: 12 kW Gtodpfoxxavtox Ab Esw Glue system: PUR Press type: rubber-coated belts Number of units installed in format cutting: 1 Number of units installed in edge processing: 6 EQUIPMENT Spraying unit CE marking

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina obdelovanca (maks.): 60 mm, širina obdelovanca (maks.): 3.000 mm, največja debelina roba: 3 mm, hitrost pomika os X: 40 m/min, največja hitrost vrtenja: 6.000 obr/min, TECHNICAL DETAILS Gtedoxxal Iepfx Ab Ejw Max. feed speed: 40 m/min Panel width min.: 240 mm Panel width max.: 3,000 mm Panel thickness min.: 8 mm Panel thickness max.: 60 mm Min. edge thickness: 0.4 mm Max. edge thickness: 3.5 mm UNITS Unit for end trimming Unit: double top and bottom pre-milling Model: KD 11 Motor power: 4.5 kW Max. speed: 6,000 rpm Magazine for edge tape Number of positions: 12 Gluing system Glue pot for polyurethane adhesive Prefuser for polyurethane adhesive Edge pressure roller track Edge Processing Unit 1 Unit: End trimming Number of motors: 2 Edge Processing Unit 2 Unit: Top milling Number of motors: 2 Edge Processing Unit 3 Unit: Edge milling Number of motors: 2 Edge Processing Unit 4 Unit: Edge milling Number of motors: 2 Edge Processing Unit 5 Unit: Top milling Number of motors: 2 automatic engagement by time Edge Processing Unit 6 Unit: Edge scraper Edge Processing Unit 7 Unit: Glue scraper Edge Processing Unit 8 Unit: Brush Number of motors: 2 EQUIPMENT PUR gluing system

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Oprema: dvostranski, Additional equipment: Seperating agent spray device on top/bottom / Double Hogger Longitudinal/Cross: 6.6 kW with electropneumatic control / Gluing Unit A3 - 2 rolls / Profile Trimming Unit FF12 on top/bottom with motors at 12000 rpm / Finish Unit FA11 on top/bottom / Stepless stop cams with maximum cam projection of 25 mm / Standard Trimming Unit SF20 6.6 kW / Rough Trimming Unit 0.55 kW PUR OTT 2kg Melting Station / Machine Benefits Technical Machine Benefits Workpiece thickness: 12 - 40 mm / minimum workpiece size (lxw): 250 x 240 mm / maximum workpiece size (lxw): 2500 x 1200 mm / maximum workpiece weight: 50 kg Roller material edge thickness: 0. 4 - 3 mm / maximum edge cross section (plastic): 135 mm² / maximum edge cross section (veneer): 100 mm² / maximum roller diameter: 830 mm Longitudinal processing speed: up to 35 m/min for thin edge up to 0. 6 mm /up to 30 m/min for thick edge up to 3 mm Cross processing speed: up to 30 m/min for panel sizing/ up to 20 m/min for edge processing Minimum workpiece gap: 500 mm Gtodpfoxwui Esx Ab Esw

Stanje: zelo dobro (rabljeno), KOMPLETNE DVOSTRANE MAŠINE ZA FORMATIRANJE I NANOŠENJE KANT TRAKE, sačinjene od: OZ2050A) Stanica za ubacivanje 'MEINERT' model P 415 D/B - L, dvostruka stanica za prihvat. Sa centralno motorizovanim rolno-stolom. Sa dve motorizovane rolne postavljene na podu za dopremu složenih ploča do stanice za ubacivanje. OZ2050B) Prva dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 440 / A / R3 OZ2050C) Povezani rolni sto 'IMA' model IDK L/Q sa obrtanjem (od uzdužnog ka poprečnom smeru) OZ2050D) Druga dvostrana mašina za formatiranje i lepljenje kant trake 'IMA' model Combima / II / 590 / B / R3 Godpfexftt Ejx Ab Ejtw OZ2050E) Povezani rolni sto 'IMA' model IDK Q/L sa uređajem za obrtanje (od poprečnog ka uzdužnom smeru) sa dvostrukim konus sistemom OZ2050F) Dvostrana stanica za skidanje sa palete 'MEINERT' model P 415 D/S - L, kompletna sa centralno motorizovanom rolnom trakom. Sa dve motorizovane rolne trake.

Stanje: rabljeno, številka stroja/vozila: 008121, Tip pritrjenega roba: tanka obroba, debela obroba, masivni les Lepilni sistem: PUR Gtsdpfsw Idhtsx Ab Eow Multifunkcijska enota: da Maks. širina plošče: 3000 mm Maks. podajalna hitrost: 32 m/min Delovni agregati, desna stran: 10 št. Delovni agregati, leva stran: 10 št.

Stanje: zelo dobro (rabljeno), Double-sided standalone machine (or 1st and/or 2nd machine in a production line) Gtsdpfjwxwyfox Ab Eew Edge thickness in rolls (min/max) mm: 0.3 / 3 Panel thickness (min/max) mm: 12 / 60 Working width (min/max) mm: 225 / 2500 Control: PC 22 / Software WoodCommander Feed speed (adjustable) m/min: 15 - 40 Safety and noise protection cabin Cam spacing (mm): PROCESSING UNIT (for each side): Sprayer unit (for liquid anti-stick) Pre-milling cutter (profile trimming) 1 x kW 4.5 Chipper KD 11 (2 x kW 6.6) – free space EDGEBANDING SECTION (for each side): Gluing unit (PUR glue + premelter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) "A" Edge magazine for rolls (compartment No. 6) End trim saw HL84 (2 x kW 0.22) 0°-30° Pre-milling unit (2 x kW 0.55) Contour milling unit (for fine trimming) CNC-controlled FK 13 (2 x kW 0.4) turret 8+8 Free space Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + smoothing unit) FA 11 OPTION: Universal milling unit for grooving/rabbetting and profiling UF11 (1 x kW 4)

Stanje: zelo dobro (rabljeno), Double-sided machine (first machine in a production line) Gjdpfx Abjwxwxbj Eotw Edge thickness in coils (min/max) mm 0.3 / 3 Panel thickness (min/max) mm 12 / 60 Working width (min/max) mm 195 / 1500 Control system: PC 22 / Software WoodCommander Feed speed (adjustable) m/min 15 - 40 Safety and noise protection cabin FORMATTING UNIT (per side): Spray unit (for liquid non-stick agent) Chipping unit KD 10 (2 x 6.6 kW) Open station EDGE BANDING SECTION (per side): Gluing unit (PUR glue + pre-melter) QA 34 (FeMa-Tech) Pressure zone (CNC-controlled) Type A Edge magazine for coils (slot no. 6) Universal milling unit for grooving, rabbeting and profiling SF 20 (HSK63F - 4.5 kW) 0°-90° CNC horizontal Pre-milling unit (2 x 0.55 kW) Milling unit MF 21 (2 x 0.55 kW) Multi-profile scraper unit (CNC-controlled) MN 21 Finishing unit (flat scraper + polishing unit) FA 11

Stanje: kot nova (razstavni stroj), COMPLETE DOUBLE-SIDED SIZING AND EDGE BANDING LINE. The line consists of the following machines: O06027A) Infeed station with double pick-up station "BARGSTEDT" Model TBH 250/D/25/12 O06027B) 1st double-sided sizing and edge banding machine "HOMAG" Model KFL 525/6/A3/15 O06027C) L-shaped connecting roller conveyor "HOMAG" Model TWL 310 / 25 / 12 O06027D) 2nd double-sided sizing and edge banding machine "HOMAG" Model KFL 526/9/A3/25 O06027E) Connecting roller conveyor "HOMAG" Model TBL 100 / 25 / 25 Gtjdpewxvdcsfx Ab Eew O06027F) Transfer system (on rails) "HOMAG" Model TWL 120 / 30 / 02 SS O06027G) Transfer system (on rails) "HOMAG" Model TWL 120 / 34 / 02 S O06027H) Outfeed station with double storage station "BARGSTEDT" Model TSP 410/D/25/12

Stanje: rabljeno, številka stroja/vozila: 007964, Tip pritrjene robne trakove: tanka rob, debela rob Lepilni sistem: EVA Večnamenski agregat: da Stroj za lepljenje robnih trakov: Stroj 1 in 2 Maks. širina plošče: 3200 mm Maks. hitrost podajanja: 40 m/min Delovni agregati, desna stran: 9 kos Delovni agregati, leva stran: 9 kos Gjdpjwu Af Ssfx Ab Ejtw