Fa. Neumeier Holzbearbeitungsmaschinen- und Werkzeuge

Stanje: rabljeno, Pribor za mizno rezkalno AIGNER Integralanschlag - rabljeno - leva polovica dolžine 500 mm, Bedpfxoxuafgs Afqedk desna polovica dolžine 650 mm

Stanje: zelo dobro (rabljeno), Zapfenska sani Panhans s vpenjalno napravo za uporabo na miznih rezkalnih strojih. Proizvajalec je Panhans, vendar je bila montirana na rezkalni stroj Martin Schenk. Dolžina osnovne plošče pribl. 1000 mm Pomik pribl. 710 mm Ekscentrično vpenjalo za fiksiranje obdelovancev Omejevalnik nastavljiv pod kotom Bdedpfsxb Sy Asx Afqsk Stroj je možno po predhodnem dogovoru prikazati pri nas na lokaciji. Ponujamo le stroje, ki so pripravljeni za predstavitev v našem skladišču – glejte tudi »druge ponudbe tega ponudnika«.

Stanje: rabljeno, Serija (približno 30 kosov) različnih rezkalnikov in kombinacij rezkalnikov, pretežno Leitz, za MEC podajalnike ali brez označbe. Označevanje: Brez ali MEC Bdjdpfx Afjw U Ay Ijqjk

Stanje: rabljeno, Premer vretena: 40 mm Bodpow Uy Naofx Afqodk Vpenjalna dolžina: ca. 170 mm

Stanje: skoraj kot novo (rabljeno), STARK Profile Knife Set 119 pieces, new, some in original packaging Article no.: JA_G250801 Description / Itemized list: 82451 8 94011 6 600130 10 62061 9 37911 6 108611 3 108511 3 108581 6 98671 4 108601 6 53421 2 600604 1 600601 2 600607 16 600608 4 600706 7 602029 4 602062 2 602063 3 8602034 2 8602035 2 8602036 2 8602037 2 8602038 2 8602039 2 6002.06 5 Note Regarding Used Equipment: • Prices are ex-works (unless otherwise stated!) from our location in Ottendorf-Okrilla, Germany – loaded free of charge (unless otherwise specified). • Subject to prior sale! • You will receive an invoice including VAT. • All items are sold as inspected, with no warranty or guarantee claims. Buyers are welcome to inspect items at our site. • Our general terms and conditions apply. • Special agreements are only valid in written form. • Any items visible in the background of images are not included in the scope of delivery. Bdedpfx Afjw Tlrksqjk • Saw blades are for illustration purposes only and are not included in the delivery. Shipping Options: • We are happy to provide you with a transport quote. • Collection from our location in Ottendorf-Okrilla by appointment is free of charge. (Optional setup and instruction for demonstration purposes is available by prior arrangement!) • Delivery is partially disassembled. • Optionally, our trained service staff can assemble the machine at your site and provide a brief introduction. Travel, transit, and service times are charged extra.

Stanje: skoraj kot novo (rabljeno), Martin quick-release nut for 40mm milling arbor. From stock, apparently unused so far. The quick-release nut is used for the T27. Bedpfx Aownnausfqedk The machine can be demonstrated on-site by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'more offers from this supplier.'

Stanje: skoraj kot novo (rabljeno), Milling arbor 40mm for Martin tilting spindle moulder T27 Clamping length 160mm, arbor diameter 40mm. Equipped with quick-clamping nut. Bjdpfewnm U Rsx Afqjdk From stock, evidently has not been used so far. The milling arbor is suitable only for the T27, not for the T26. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse; see 'More offers from this provider.'

Stanje: rabljeno, No. 3203 Milling Tools Leitz, Oppold Used Comprising: Bdodpfev Dutnex Afqsk 2x Leitz milling cutters, 1 of which is unused 4x milling discs green 6x Oppold profile cutters - 2 x Leitz milling cutters, 1 unused Bore Ø 60 mm, Outer Ø 170 mm, Height 40 mm - 4 x green milling discs Bore Ø 35 mm, Outer Ø 90 - 120 mm, Height approx. 25 mm - 6 x Oppold profile cutters Bore Ø 30 mm, Outer Ø 120 mm, Height 25 mm Sale on behalf of customer, ex location near 73430 Aalen Shipping by us optional Subject to errors in description and price To avoid possible misunderstandings, on-site inspection by appointment is possible and recommended. Sale is carried out in as-is condition Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee. Subject to prior sale. With used machines, any warranty is excluded, sale is “as seen”. Pictures and videos are for illustration purposes and do not represent the actual scope of delivery. Terms of payment: prices plus statutory VAT, payment before collection or shipping Delivery terms: ex location

Stanje: rabljeno, No. 3201 Milling Tool Set Stehle, Wigo Used Consisting of: 1 x Profile Cutter Head Stehle 525 1 x Profile Cutter Head Wigo No. 2047 1 x Profile Cutter Head Wigo No. 1243 1 x Profile Cutter Head Stehle 525 Bodpsv A U Nmjfx Afqjdk 122 x 60 x 40 mm With interchangeable knives Approx. 16 profile knives included 1 x Profile Cutter Head Wigo No. 2047 120 x 40 x 40 mm With interchangeable knives 1 x Profile Cutter Head Wigo No. 1243 120 x 40 x 40 mm With interchangeable knives Sale on behalf of a customer, ex location near 73430 Aalen Shipping available by arrangement Subject to errors and price changes To avoid possible misunderstandings, an on-site inspection is possible and recommended by prior arrangement Sale as is Technical details, condition description, year of manufacture and scope of delivery according to manufacturer's brochure and/or previous owner, without guarantee Subject to prior sale No warranty is provided for used machines. The sale is subject to the condition: "purchased as inspected" Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus legal VAT, payment prior to collection or shipment Delivery conditions: ex location

Stanje: rabljeno, No. 3200 Milling tools Stehle, Leitz Used Consisting of: 1 x profile cutter head Stehle 525 1 x profile milling cutter Leitz A7 SLS, 180 x 50 x 250 1 x profile cutter head Leitz No. 232 1 x profile cutter head Leitz 1 x Leitz - Profile cutter head Stehle 525 122 x 60 x 40 mm With replaceable knives Approx. 20 profile knives - Profile milling cutter Leitz A7 SLS 180 x 50 x 250 mm - Profile cutter head Leitz No. 232 80 x 80 x 30 mm With replaceable knives - Profile cutter head Leitz 100 x 80 x 35 mm - Leitz approx. 145 x 40 x 60 mm Composed of 2 discs Sale on behalf of customer, ex-location near 73430 Aalen Shipping available by arrangement Errors in description and price excepted To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sale takes place in as-is condition Technical specifications, condition description, year of manufacture and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale Bjdpfov A U A Hex Afqodk No warranty is provided on used machines; sale is made on an "as viewed" basis Pictures and videos are for illustration purposes and do not represent the actual scope of delivery Payment terms: Prices plus statutory VAT, payment prior to collection or shipping Delivery terms: ex location

Stanje: zelo dobro (rabljeno), Protective hood for milling contoured parts on rings, etc. This safety device is frequently recommended by the employers' liability insurance association (BG). Maximum milling cutter diameter: 160 mm With brush and feed wedge Bedjvz Dr Ijpfx Afqedk It is apparent that the device has not seen much use up to now. The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse—see "other offers from this supplier."

Stanje: rabljeno, Hole spacing: 320 mm Stop length: 700 mm Bedpevyq Tijfx Afqodk Table size: 460 x 220 mm

Stanje: novo, Safety Stop Plate Set 208 For mounting onto existing milling fences. The set consists of: 2 cast stop plates, 430 mm long 2 profile groove rails 2 wooden anti-splinter tongues Bjdpfxsvxr Tnj Afqjdk 2 rulers, 260 x 6 mm 3 rulers, 260 x 3 mm 1 wooden featherboard 8 steel sliding blocks with screws 10 rotatable brass sliding blocks with screws 1 Allen key 2 eccentric clamps approx. 22.6 kg

Leto izdelave: 1996, Stanje: rabljeno, with new multiplex stop plates (wood) Used, good condition Bodpfx Aevxr Ncjfqodk Manufacturer: Schneider Year of manufacture: 1996 Milling fence with fine adjustment Original price approx. €2,500.00 Extraction connection diameter: 120 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Transfer in as-inspected condition, without warranty or guarantee

Stanje: rabljeno, used, good condition Jaw length right: 600 mm Jaw length left: 450 mm Cast iron stop jaws Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-seen condition, as inspected, without guarantee or warranty Bdjdpfx Aovwf Ddefqjk

Stanje: rabljeno, Jaw width 500 mm Milling fence for spindle moulders with new wooden pressure jaws for self-installation Pressure jaws are included and only need to be adjusted Jaw length 500 mm Milling fence with fine adjustment Location: 97447 Gerolzhofen, free loaded, unpacked Handover in as-inspected condition, Bedpfx Afevwftfsqedk without warranty or guarantee

Stanje: rabljeno, Make TAPOA Bdedpovwfk Djfx Afqok as new condition - For accident-proof milling of curved workpieces on a spindle moulder - For tools up to Ø 160 mm - With pressure and safety ring - With fine adjustment for milling depth - Extraction port Ø 120 mm - The curved milling fence can be mounted and adjusted on any spindle moulder - Machining of the workpieces is possible in both left and right rotation - The transparent safety cover allows optimal visibility of the tool Location: 97447 Gerolzhofen, free loaded, unpacked Sale as inspected, in current condition, without warranty or guarantee

Stanje: zelo dobro (rabljeno), Protective hood for milling of shaped parts on rings, etc. This safety device is frequently recommended by the professional association (BG). Maximum cutter diameter: 160 mm With guide ring, brushes, and brake wedge for the guide bearing Obviously, it has not seen much use so far. Year of manufacture unknown The machine can be demonstrated on-site at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse—see 'more offers from this provider.' Bdjdpfxet Ixiks Afqsk

Leto izdelave: 2021, Stanje: skoraj kot novo (rabljeno), Protective hood for milling contoured parts on the ring, etc. Bedpfx Aet Ixhgefqodk This safety device is often recommended by the employers’ liability insurance association (BG). Maximum cutter diameter: 160 mm With guide ring, brushes, and brake wedge for the guide bearing. Has evidently not seen much use to date. The machine can be demonstrated at our premises by appointment. We only offer machines that are available for demonstration in our warehouse. See 'other offers from this supplier.'

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, SK 30 ISO 30 Collet Chuck LEUCO with Toothed Ring A = 72 mm with Carbide Tool HM-WPL Router Bit D = 20 mm x NL = 55 mm, Z1+1 Unused, but being sold as used. The collet chuck with toothed ring is designed for CNC applications from the renowned manufacturer SCM Morbidelli, and provides a tool interface according to ISO 30 standard. The main body is precision-engineered, hardened, ground, and finely balanced. The steep taper design complies with ISO standards. Too expensive? Visit our webshop! Looking for other sizes? Visit our webshop! Note: The rights to the uploaded images belong to Gerhard Sondermann GmbH and will be enforced in the event of misuse. Bsdpferckgxox Afqedk

Stanje: rabljeno, Bore: 30 mm Outer diameter: 140 mm Width: 50 mm Bjdsmt S Iiopfx Afqsdk

Stanje: rabljeno, End mills, shank cutters, milling cutters, slot cutters, wood milling cutters Bedpjb D I Axofx Afqedk - Two-flute cutters - Roughing and finishing cutters - 4x: Cutter Ø 4 x 12 mm - 7x: Cutter Ø 5 x 12 mm - 10x: Cutter Ø 6 x 14 mm - 1x: Cutter Ø 8 x 20 mm - 5x: Cutter Ø 10 x 20 mm - 4x: Cutter Ø 11 x 22 mm - 3x: Cutter Ø 12 x 22 mm - Shank: Ø 10 mm - Type: M623 - Quantity: 34 pieces - Sale: only as a complete set - Weight: 3.6 kg

Stanje: rabljeno, Boring head, drill bit, milling cutter - 1x arbor (please refer to drawing in the photos) - Milling cutter 5x: Ø 16 x 40, equipped with carbide inserts - Milling cutter 2x: Ø 15 x 40, equipped with carbide inserts - Milling cutter 2x: Ø 14 x 40, equipped with carbide inserts - Milling cutter 2x: Ø 12 x 40, equipped with carbide inserts Bjdpjb D I A Nefx Afqedk - Supplied in wooden box - Dimensions: 250/175/H75 mm - Weight: 2.7 kg

Stanje: rabljeno, Wood cutter reversible plates, knife inserts, profile cutter inserts - Knife width: 40 mm - Knife thickness: 2 mm Bdodob A Sugjpfx Afqsk - Price: complete set - Weight: 0.3 kg

Stanje: rabljeno, Carbide indexable inserts for wood milling cutters, cutter plates, profile cutter inserts -Cutter width: 60 mm -Cutter thickness: 2 mm Bsdpfx Afjb A Sufsqjdk -10 pcs: left -10 pcs: right -Price: complete set -Weight: 0.8 kg