KLG Sp. z o.o.

Stanje: skoraj kot novo (rabljeno), Type: Farsoon FS HT1001P Build Station, Preheating Station, Cooling Station Automated job changeover between two build cylinders Scanner from a Chinese manufacturer, deviates from standard series specification Modifications and condition: - Overflow system upgraded with automatic draining - Laser protection glass replaced, approx. 200 operating hours - Infrared emitters replaced, approx. 500 operating hours - Ports for IR cameras present, cameras not included - Curtains installed in the build chamber - Operating hours printer: less than 2000 hours Dimensions: 5585 × 3410 × 2980 mm Weight: approx. 5000 kg Maximum build size: 1000 × 500 × 450 mm Build volume: up to 15 liters per hour Scanner: 2 × high-precision 3-axis galvo systems Scan speed: up to 15.2 m/s Layer thickness: 0.06 to 0.3 mm Laser: 2 × CO₂ lasers, 100 W each Max. chamber temperature: 220 °C Thermal control: multi-zone heating with intelligent temperature management Temperature regulation: continuous real-time monitoring and optimization Operating system: 64-bit Windows 7 File format: STL Software features: manual and automatic control, real-time parameter adjustment, 3D visualization and diagnostics Recommended materials: FS3300PA, FS3250MF, FS3400GF, FS-TPU Voltage: AC 380 V, 3-phase, N/PE Frequency: 50 to 60 Hz Total power: 25 kW Maximum current: 45 A Voltage fluctuation: ± 10 % Fuses: 3 × 50 A Preheating Station - No active preheating present - Used for storage of build cylinders for automated changeover - Roller blinds for protection against crushing and burn hazards Cooling Station - Nitrogen flooding under seal - Surface temperature measurement of the powder cake - Roller blinds as safety feature - Cooling system: Deltatherm - Compressor power: 1.32 kW - Pump power: 0.45 kW - Flow rate: approx. 18 liters per minute - Pump pressure: approx. 5.0 bar - Cooling medium: drinking water - Connections: supply and return 3/4" female thread - Tank volume: approx. 30 liters - Air volume: approx. 2250 cubic meters per hour - One axial fan present - Fan power: 135 W - Dimensions: W 740 mm × D 740 mm × H 500 mm - Weight: approx. 110 kg Unpacking Station (Powder Breakout Station) Dimensions: 1870 mm × 920 mm × 2150 mm Weight: approx. 1200 kg 200-240 Volts Frequency: 50 to 60 Hz Total power: 2 kW Max. current: 10 A Powder Handling Schleiss RPTech - Function: Mixing, sieving, and conveying plastic powders - System forms a complete powder circuit - Components: powder mixing unit with mixer and sieving machine, containers for blended powder, overflow powder, used powder, and fresh powder; pumps for material transfer between containers; humidification module present Dcsdpsy Hg S Tofx Apleg - Vibratory motor for sieve not included Powder Handling Mixing and Sieving System Technical Data: - Dimensions: 1800 x 815 x up to 2600 mm height - Weight: approx. 240 kg - Temperature range: 0 to 40 °C - Mixing throughput: approx. 10 liters in 8 min - Sieving throughput: 5 kg in 3 min - Voltage: 230 V at 50 Hz with 16 A circuit breaker - Mixer power: 210 W - Extraction power: 2200 W - Air demand: approx. 100 to 140 liters per minute - Operating pressure: 5 to 6 bar Condition: used Scope of delivery: (see picture) (Technical data may be subject to change and errors reserved!) For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 957 h, vrsta vhodnega toka: trifazni, skupna masa: 600 kg, vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, laserska moč: 30 W, dolžina podajanja os X: 200 mm, dolžina pomika po osi Y: 250 mm, dolžina podajanja os Z: 330 mm, največja hitrost vožnje: 20 mm/min, EOS Formiga P110 Velocis Complete System – incl. peripherals & accessories For sale is a high-performance and proven EOS Formiga P110 Velocis system for industrial 3D printing using the SLS process (Selective Laser Sintering). _____ Dcjdjy El Anepfx Aplsg Machine details: • Model: EOS Formiga P110 Velocis • Year of manufacture: 2019 • Operating hours: only 957 h • Process: Selective Laser Sintering (SLS) • Condition: very good, fully functional • Accessories and peripherals: all original EOS components _____ Technical specifications: • Build volume: 200 x 250 x 330 mm (X x Y x Z) • Laser: CO₂ laser, 30 W • Layer thickness: 0.06 – 0.12 mm • Build speed: up to 20 mm/h (z-axis, material-dependent) • Materials: PA12, PA11, TPU, and other SLS-suitable polymers • Power supply: 400 V, 3~ / 50 Hz • Compressed air: required • Software: EOSPRINT / Material Management System • Machine weight: approx. 600 kg _____ Scope of supply (complete system): • EOS Formiga P110 Velocis • Unpacking station and sieving station P1/P3 • Mixing station P1 for recycled powder (material preparation for economical operation) • Sandblasting cabin by Leering, type DI-12 (for professional post-processing) • Ruwac vacuum unit, type WS 200H Zone 22 explosion-proof (for safe handling of plastic powder) • 4x material containers • 2x build containers _____ Key highlights: • Very low operating hours (only 957 h) → virtually as new • Complete, ready-to-use SLS system • High productivity thanks to Velocis technology • Closed material loop → reduced material costs • Industrial standard – ideal for professional applications • All accessories original EOS → perfect system integration _____ Fields of application: • Prototyping • Small series production • Spare parts & customized components If you have any questions or need more information, please send us a message or give us a call. A viewing appointment can also be arranged after prior agreement.

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, Robotska CNC delovna postaja – SINUMERIK ONE Nudimo robotsko delovno postajo z industrijskim robotom z dosegom 3000 mm, upravljano s CNC sistemom Siemens SINUMERIK ONE, namenjeno za širok spekter aplikacij: Dsdpfx Apey D N Acsljcg brusenje rezkanje dodelava velikoformatni 3D tisk obdelava Delovno postajo je mogoče razširiti z: pozicionerjem obdelovanca linearnim hodom robota za povečanje delovnega prostora Dobavljamo kot celovito (turn-key) rešitev popolnoma prilagojeno specifikaciji naročnika. Orodna oprema robota je vedno zasnovana in ocenjena glede na konkretno aplikacijo. Natančnost in kinematika: Ponujamo različne izvedbe glede na zahtevano natančnost obdelave V naših rešitvah uporabljamo kinematiko MABI z neposrednim merjenjem, ki omogoča doseganje visoke natančnosti tudi pri obdelavi materialov kot je jeklo Za manj zahtevne aplikacije ponujamo cenovno ugodnejšo kinematiko od Comau, primerno na primer za obdelavo lesa in plastike Varnostne rešitve: ograja s sistemom Haberkorn ali popolno zaprto ohišje delovne postaje

Leto izdelave: 2026, stanje: novo, Funkcionalnost: popolnoma funkcionalen, Robotic Grinding Cell – CNC Control SINUMERIK ONE We offer a state-of-the-art robotic grinding cell for precise and efficient grinding with CNC control. The ideal solution for automating your production and ensuring consistently high surface quality. Main parameters: - Industrial robot with a reach of 3000 mm - Complete safety enclosure for the system - Control system: Siemens SINUMERIK ONE - HT2 operator panel - 22'' touch control panel for intuitive operation Programming and control: - Programming using NC code (CNC standard) - Workshop programming: - ShopTurn - ShopMill - Programming via standardized CAD/CAM systems possible - Intuitive program creation directly at the machine – no CAM system required Dedjy D Nwtepfx Aplecg Grinding technology: - High-performance grinding spindle by PushCorp (Power selectable depending on application) Expansion options: - Integration of a rotary table (positioner) - Extension with a linear axis to enlarge the working area - Option to integrate a machining spindle with automatic tool change system (ATC) - Adaptation to specific customer requirements Advantages: - High repeatability and consistent grinding quality - Combination of robotics and CNC control in one system - Flexibility for grinding and subsequent machining in a single setup - Wide range of programming options (NC, workshop programming, CAD/CAM) - Easy operation thanks to workshop programming - Integration into Industry 4.0 concepts possible

Leto izdelave: 2022, obratovalne ure: 5.450 h, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, 3D printer, fully functional. Includes various additional nozzles. Comes with a robust, powder-coated Prusa print bed. Right extruder has rarely been used. Overall condition is good. The printer is ready for collection at any time. Dedpfxsyim Dks Aplocg Printer specifications (without guarantee): The Raise3D Pro3 is a professional FFF dual-extruder 3D printer with a build volume of 300x300x300 mm (255x300x300 mm in dual mode). It features an enclosed chamber, nozzle temperatures up to 300 °C, automatic bed leveling, and supports materials such as PLA, ABS, PETG, ASA, and TPU. Key technical data Raise3D Pro3: Printing technology: FFF/FDM (Fused Filament Fabrication) Print head: Dual extruder with electronic lifting system (quick switching) Build volume (W x D x H): Single: 300 × 300 × 300 mm Dual: 255 × 300 × 300 mm Device dimensions: 620 x 626 x 760 mm Maximum temperature: Nozzle: Up to 300 °C Print bed: Up to 120 °C Print speed: 30 to 150 mm/s (standard), HS version (Hyper Speed) up to 300 mm/s Layer resolution: 0.01 mm – 0.25 mm (depending on nozzle) Nozzle diameter: 0.4 mm (standard), optional 0.2, 0.6, 0.8, 1.0 mm Filament diameter: 1.75 mm User interface: 7-inch touchscreen (1024 x 600) Connectivity: Wi-Fi, Ethernet Slicer: ideaMaker Special features: Automatic bed leveling (9 points), print recovery after power loss, air filter The Raise3D Pro3 is suitable for industrial applications, prototyping, and small batch production. The Pro3 Plus is the version with an increased Z-axis of 605 mm.

Leto izdelave: 2001, stanje: zelo dobro (rabljeno), Proizvodna hitrost: 600 skodelic/min Barve: 8 Djdpfexww Nujx Aplocg Minimalni BH premer: 60 mm Maksimalni BH premer: 130 mm Minimalna višina: 30 mm Maksimalna BH višina: 160 mm Števec: proizvedenih 25.731.666 skodelic Oprema / dodatne informacije: Sestavljeno iz: • Enota za odstranjevanje zložene embalaže • Tiskarski stroj • Vodila za skodelice • Enota za ponovno zlaganje

Stanje: dober (rabljeno), EOS Type: P390 Eosint P 390 – Laser Sintering System (SLS) Operating Hours: 6,735 h For sale is an industrial laser sintering system from EOS, model P 390. This unit is suitable for additive manufacturing (SLS – Selective Laser Sintering) of plastic components on an industrial scale. Base machine with control cabinet & control terminal Exchange frame with build platform Multibox is a typical accessory for EOS systems, used for powder handling, transport, and intermediate storage of material. Technical data: Build volume: approx. 340 × 340 × 620 mm (X × Y × Z) Minimum layer thickness: 0.1 mm (variance < 0.05 mm) Powder container capacity: 2 × 45 liters with fluidization and dispenser Heating: Infrared, 3.2 kW Nitrogen generator: integrated, purity > 99 % Electrical supply: 400 V ±6/–10 %, 50 Hz, 3 × 32 A, energy consumption approx. 2 kW Extraction: 20 m³/h at 6 bar, DN 100 Cooling: 5.7 l/min at 18–20 °C (± 0.1 °C) Dimensions & weight: Machine (W × D × H): approx. 1,230 × 1,175 × 2,100 mm Control cabinet: 610 × 790 × 2,100 mm Control terminal: 950 × 700 × 1,550 mm SMC HRS024-AN-20-T Thermo-Chiller – Air Cooled – High-Pressure Pump Technical data: Model: HRS024-AN-20-T Cooling capacity: approx. 2.1–2.4 kW Temperature range: 5 °C to 40 °C Temperature stability: ± 0.1 °C Cooling type: Air-cooled Pump: High-pressure pump ("T" version) Flow rate: up to approx. 14 l/min Dcjdpexbgnbsfx Aplsg Tank capacity: approx. 5 liters Medium: Water or water-glycol Connection: NPT version ("AN") Power supply: 200–230 V AC, single-phase Refrigerant: R407C Weight: approx. 1,110 kg Condition: used Scope of delivery: (See picture) (Specifications subject to change and error!) If you have further questions, please feel free to contact us by phone.

Stanje: rabljeno, Leto izdelave: 2000, Machine offer Manufacturer: OMSO Machine designation: DM 385/6 BOX Year of manufacture: 2000 Operating hours approx.: 31,950 Number of printing stations: 6 Number of printing units: 6 Number of bottom printing stations: 2 Number of bottom printing units: 2 Djdpfx Asw D R Aqsplocg

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2026, skupna dolžina: 3.000 mm, skupna višina: 2.000 mm, trajanje garancije: 12 meseci, I am offering a robotic 3D printer equipped with a CEAD extruder and Siemens Sinumerik One CNC control – a solution for large-format printing of molds, design elements, boats, laminating tools, and much more. The machine is manufactured in the Czech Republic and comes with on-site integration and training for the customer. Key features: - Printing system: CEAD E25 extruder (up to 12 kg/h) or S25 (up to 24 kg/h) – selectable according to customer requirements - Robot arm: COMAU N-170 with 3 meters reach and 160 kg payload capacity - Control system: Siemens SINUMERIK ONE – full CNC control, technology optimization via override possible. Dedpfxewgkqte Apljcg Software compatibility: ADAXIS, AiBuild, RhinoCAM, Siemens NX, and other CAD/CAM platforms Condition: Brand new Optional accessories: Heated print bed for optimal adhesion and print quality Note: Software and print bed are not included in the standard scope of supply, but are available as optional accessories. The stated price includes the basic CEAD E25 extruder.

Leto izdelave: 2019, stanje: rabljeno, Technical Details: Control System: Sinterit Studio 2019 Open Voltage: 220/50 V / Hz Total Power Requirement: 1.0 (max. 1.8) kW Machine Weight approx.: 90 kg Dimensions: 690 x 510 x 900 mm SLS Laser System IR Laser Diode 5 (W) Max. Printing Diagonal Distance: 316 mm Flexa/TPE - High Precision Max. Print Volume 110 x 150 x 250 mm Dodpfeu N Auuox Aplecg PA - High Precision Max. Print Volume 90 x 130 x 230 mm X/Y Accuracy: 0.05 mm Table Size/Working Area: 150 x 200 x 260 mm Built-in Nitrogen Chamber Nitrogen Consumption: 0.48 m³/h Heating System with Max. Chamber Temperature: 200°C Accessories: Glass Plate (Laser Protective Glass) 1x USB (Software Accessible), Software Sinterit Studio 2019 open, Supported Formats STL, OBJ, 3DS, FBX, DAE, 3MF, Operating System MS Windows Lighting (Set of Infrared Heaters 24V) Various Bottles with Polyamide Powder Miscellaneous Small Parts

Leto izdelave: 2006, stanje: dober (rabljeno), 8-barvni Polytype BDM 611 stroj za tisk na lončke Vključuje: Uviterno UV-sistem; Corona, Arcotec predobdelava. Djdpfjn Utctex Aplocg * Kapaciteta: 36.000 lončkov/uro * Min. premer lončka: 60 mm * Max. premer lončka: 130 mm * Max. višina skodelice: 160 mm Ta stroj za tisk na lončke je že razstavljen in pripravljen za transport (lokacija: Waalwijk, Nizozemska)

Leto izdelave: 1992, stanje: zelo dobro (rabljeno), številka stroja/vozila: 24, Kom. številka: 551.3852 Barve: 6 Oprema / dodatne informacije: Sestavljeno iz: • Enota za razkladanje • Tiskarski stroj • Vodila za lončke • Enota za ponovno zlaganje Tehnični podatki Tip tiskarske enote: DW 200-230 Premer klišejskega valja: 200 mm Največja mogoča širina tiskarskega motiva: 110 mm Število tiskarskih segmentov: 4 kosi Največji premer roba lončka: 130 mm Najmanjši premer roba lončka: 70 mm (55 mm) Maksimalni tiskarski obseg (posebno klišejskega obsega): (361mm) / Ø 115 Največja višina lončka: 130 mm Najmanjša višina lončka: 35 mm Največje konusno naklon: 10° Proizvodna hitrost – odvisno od velikosti lončka, kakovosti in surovin ob uporabo UV sušenja – do 24.000 kosov/h Električna priključna moč (stroj, sušenje in zlaganje): cca. 35 KVA Električna kontrola s Siemens PLC / kontrolna postaja z 2-vrstičnim zaslonom Napetost je 400 V, trifazna, z nevtralnim vodnikom in ozemljitvijo. Frekvenca je 50 Hz. Dedpjn D E A Tjfx Aplocg

Leto izdelave: 2023, obratovalne ure: 10.700 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Gradbena cilindra: 2x 400x400x520 mm Hitrost skenerja: 15,2 m/s Skenar: Visokonatančen triosni digitalni galvo sistem Laser: CO2 laser, 1×100W Maksimalna temperatura komore: 190°C Teža: cca 3.000 kg Vključno z generatorjem dušika Vključno s hladilnikom (chiller) Djdpfen Dxbysx Aplocg Vključno s postajo za razpakiranje

Leto izdelave: 1996, stanje: zelo dobro (rabljeno), številka stroja/vozila: 560037, Ref. No.: 451.4013 // No. 2620 Colors: 6 // Capacity: up to 36,000 cups per hour Equipment / Further Information: Consists of: • Destacking unit • Printing machine • Cup guides • Restacking unit Max. cup rim diameter: 130 mm Min. cup rim diameter: 55 mm Production speed depending on cup size, quality, and raw materials with UV curing: up to 24,000 cups/hr (without positioning) Dcsdehbvrnjpfx Aplog With positioning: 12,000/hr – 15,000/hr depending on cup, format, and tab. Electrical connected load with curing: approx. 26 kVA Electrical connection: 3 x 400 V, 50 Hz Air connection / consumption: 6 bar / approx. 50 m³/h Weight: approx. 7,800 kg This machine does not have a positioning system.

Stanje: pripravljen za uporabo (rabljen), Number of colors: 6, with paternoster feeder, operating hours: 33,213 h. Dcedpsgggb Ssfx Aplog

Stanje: zelo dobro (rabljeno), Eos EOSINT Plastic Laser Sintering System Here we offer an Eos EOSINT Plastic Laser Sintering System. Eos EOSINT Plastic Laser Sinter System P385 The following items are included with the EOS P385 system: Build chamber Powder container Chiller: Termo TEK Termochiller 1100 The following upgrades have already been carried out: Software: CDs for Eosint P3 Process Software PSW 3.2 for Windows 2000, XP Dodpfx Ajf Ey Eaeplocg Materialise: Magics RP 9.0 Machine upgrade from P360 to P385 on 10.08.2007 Laser replacement on 15.05.2008 X drive motor: used motor replaced on 04.05.2020 Pyrometer replaced on 30.06.2020 Build volume: 350mm x 350mm x 610mm Voltage: 3/N/PE/400V, frequency 50 Hz Connection value: 8 kW, fuse protection 32 A Max. laser power: 100 W, laser class open: 4 Laser class closed: 1 Weight: 850 kg Type: EOSINT Upgrade P385 Condition: used Scope of delivery: (see picture) (Subject to alterations and errors in the technical data and specifications!) If you have further questions, we would be happy to answer them by phone.