RS Oils

Stanje: novo, Popolnoma nov rezervoar 316L, 5000L, nikoli uporabljen Fgsdpfx Abozcg Ufotoc

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Manufacturer: BRINOX Process Systems Type: LEP 2.3 System Type: Temperature Control Unit for Washing and Elution Solutions Year of Manufacture: 2020 Serial Number: 1003563 Equipment Number: KK6752 Design: Stainless steel skid, pharmaceutical-grade construction LEP 2.3 KK6752 Package 7 Technical Data Design: Compact, pre-assembled temperature control unit on a welded stainless steel frame (skid system) Materials: Product-contact: Stainless steel 1.4435 / 1.4404 Non-product-contact: Stainless steel 1.4301 Piping System: Orbital welding (pharmaceutical grade) Fully welded design As-built isometry available Pressure Data: Leak test with compressed air Test pressure: 3.37 bar Holding time: 1 hour Result: Leak-free Measurement and Control Technology: Pressure measurement (PIR, PI, PIRC) Temperature measurement (TI, TIRC) Level measurement (limit) Flow monitoring Position feedback Motor control Open/Close valves pneumatic Pressure sensor measuring range: 0–10 bar Electrical Connection: Control air: 6 bar Automation-ready (instrumentation points fully documented) Main Components: 2 process pumps Plate heat exchanger Finned tube heat exchanger Expansion vessel Multiple hygienic control and shut-off valves Integrated instrumentation units Cooling Medium: Cooling brine (supply/return interfaces available) ───── Dimensions / Weight Design: Compact skid unit Industrial version for cleanroom/technical area (Transport and installation dimensions as per layout drawing) Application Area Temperature control of: Washing solutions Elution solutions Process media in biopharmaceutical environments Field of Application: Biotechnology Plasma fractionation GMP production facilities Build / Construction Welded stainless steel frame Vibration-damped pump mounting Hygienic piping layout Fully P&ID-compliant implementation Clear separation of product/non-product areas Service and maintenance accessibility tested Mechanical SAT-IQ test performed Measurement SAT-IQ test performed P&ID diagram check completed Layout drawing check completed Condition Year of Manufacture: 2020 Industrial and pharmaceutical-grade version New, original packaging Pressure tested Sensors calibrated FAT (Factory Acceptance Test) performed FAT / Documentation Available: FAT plan and report Deviation management Layout check Fgedpjyl Ipcsfx Abtjc P&ID check Leak test Sensor calibration Service and accessibility check EN10204 factory certificate Material lists (LBM) As-built isometry Component lists (equipment & instrumentation points) Special Features Pharma GMP compliant design Complete validation documentation Full traceability Certified pressure testing Calibration certificates from accredited laboratories High-quality system construction by BRINOX High-end biopharmaceutical standard

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, Manufacturer: BRINOX Type: LEP 2.3 – Washing Solution Temperature Control Unit Year of Manufacture: 2020 Serial Number: 1003561 Tag Number: MR-INH-VPR61-KK6751 Equipment Number: 20022779 Location: Germany Condition: New, unused, original packaging Technical Data System Type: Washing Solution Temperature Control Unit (temperature control skid) Design: Compact, pre-assembled skid unit in stainless steel frame Frame Material: Stainless steel Insulation: Fully insulated piping and components Pumps: Two circulation pumps with electric motor Stainless steel pump housing Inline design Fsdpfsyl Ib Esx Abtjgc Heat Exchanger: Integrated stainless steel heat exchanger Tube bundle and shell-and-tube design Fittings: Multiple GEMÜ ball valves Stainless steel valves Pneumatic control valves Safety valves Instrumentation: Pressure transmitter Manometer Temperature measuring points Integrated flow measurement Electrical: Integrated control cabinet or terminal box Pre-wired, ready for connection Industrial standard components Piping: Stainless steel process piping Fully insulated Flange and clamp connections Transport: Suitable for forklift and crane handling Solid stainless steel base frame Application The temperature control unit is designed for the controlled tempering of a washing solution in pharmaceutical or chemical processes. Suitable for CIP and washing processes, pharmaceutical production lines, chemical process plants, and temperature-controlled media circuits. Construction Compact, modular skid design Pre-assembled and ready for connection High-quality stainless steel construction Industrial quality components, including GEMÜ fittings Service-friendly layout Condition New equipment Never been in operation Original packaging Direct from manufacturer’s project Immediately available FAT and Documentation Status Technical documentation available Project documents available Drawings available P&ID available Component lists available Operating manual available Special Features Completely insulated process piping High-quality stainless steel construction Industrial brand components Ideal for new projects or as a replacement/redundancy unit Immediate integration possible

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Machine description BRINOX Process Plant / CIP Skid Type CS6700 (CS6723) GMP CIP Process Skid 1.4435 Manufacturer BRINOX Process Systems Year of construction 2020 Technical Data Design as a stainless steel process skid in hygienic construction. Fgedpjyl H Svjfx Abtec Conductivity measurement 1–500 µS/cm, analog signal (AI), hygienic connection DN 50. Flow measurement 0–18,000 kg/h, analog signal (AI), connection DN 25, sterile flange DIN 11864-2A. Pressure measuring points −1 to 9 bar and −1 to 15 bar, analog signal (AI), hygienic connections DN 50 and ½", among others DIN EN ISO 228. Temperature measuring points −50 °C to +200 °C, analog signal (AI), connection DN 32, welded according to DIN 11866/A. Limit level sensors, digital (DI), hygienic connection DN 50. Multiple position feedbacks with IO-Link / digital. Pneumatically actuated on/off valves (DO) in stainless steel hygienic design. Product-contacting materials according to EN 1.4435 / 1.4404 (AISI 316L). Documented surface roughness of product-contacting surfaces in the range of Ra approx. 0.3–0.4 µm. Application Hygienic CIP and process skid for pharmaceutical and biotechnological applications. Suitable for cleaning process lines and vessels under GMP conditions. Construction Welded stainless steel skid with orbitally welded piping. Hygienic clamp and sterile connections. Fully instrumented with flow, pressure, temperature, and conductivity measurement. Pneumatic valve technology with digital feedback. Components from renowned manufacturers such as Endress+Hauser, Gemü, Samson, SICK, etc. Clean, GMP-compliant execution. Condition New. In original packaging. Unused. Never installed or put into operation. FAT / Documentation Status Fully documented Factory Acceptance Test performed. Layout drawing review documented. Maintenance and calibration accessibility check documented. Surface roughness inspection documented. Tightness test documented. Sensor calibration documented. Welding documentation fully checked. Complete documentation list FAT plan and FAT report. P&ID diagram. Layout drawings. Material lists for metals and polymers. Material certificates 3.1. WPQR, WPS, welder qualifications. Welding reports and isometric drawings. Calibration certificates for measuring instruments. Surface roughness measurement protocols. Tightness test protocols. EU declarations of conformity for installed components. Operating documentation. Special features GMP-compliant, fully documented manufacturing. High-quality instrumentation. Very low documented surface roughness values. Immediately available. Ideal for pharmaceutical, biotech, or contract manufacturers with high documentation requirements.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, Manufacturer BRINOX Model LEP 12 – CIP System Precipitation PRE LEP 12 CS6721 Package 3 Year of Manufacture 2020 Condition New, original packaging, unused. The system has only been tested at the factory as part of the FAT (Factory Acceptance Test). No commissioning, no production, no contact with process media in operation. Description Modular CIP process system for pharmaceutical applications in hygienic stainless steel design. Compact skid-mounted unit with fully integrated measurement, pump, and valve technology. Dimensions Approx. 1520 x 970 x 1994 mm Materials Product-contact parts: Stainless steel 1.4435 Frame/structure: 1.4301 Welds in accordance with EN ISO 13920 Equipment Fgsdpfx Aboyl H H Tjtec – Shell-and-tube heat exchanger – Hygienic centrifugal pump – Electromagnetic flowmeter – Conductivity measurement – Pressure transmitter – Temperature measurement points – Pneumatic seat and diaphragm valves – Stainless steel frame structure – CIP supply / CIP return – Media connections for NaOH, acetic acid, steam, condensate, wastewater Tests Complete FAT performed including: – Layout inspection – P&ID check – Maintenance and calibration accessibility check – Documentation check – Surface roughness measurement – Sensor calibration – Welding documentation check – Leak test with compressed air – passed Calibration certificates available. Material certificates 3.1 available. Complete welding documentation (WPS, WPQR, welder certificates, NDT records). CE-compliant design. Scope of delivery Complete pre-assembled process module including documentation. FAT records, welding reports, material certificates, and calibration certificates fully included.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Storage Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVBBHI-3500 Tag No.: BH6772-BH1001 Package 30 Serial Number: 1003462 Year of Manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Storage tank / process tank Nominal volume: 3,500 liters Total volume: 4,082 liters Jacket volume: 226 liters Empty weight: approx. 1,760 kg Product-contact material: 1.4435 (AISI 316L pharmaceutical grade) Jacket material: 1.4404 CE marking: CE 0036 Permissible pressure PS vessel: -1 / +3 bar Permissible pressure PS jacket: -1 / +6 bar Test pressure PT vessel: 5.6 bar Test pressure PT jacket: 10.8 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 2 Design according to AD 2000 regulations Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (ID No. 0036) TÜV approval including design inspection, final inspection and pressure test fully documented. FAT – Factory Acceptance Test The vessel was fully inspected and released ex works. Carried-out inspections incl.: • Pressure test according to PED • Design inspection by TÜV SÜD • Visual inspection of all weld seams • Non-destructive testing (RT, PT) • Dimensional and drawing comparison (as-built) • Verification of material certificates • Calibration of manometers • Checking of markings • Documentation check as per test list FAT and TÜV protocols fully available. DESIGN • Cylindrical, horizontal storage tank • Double jacket for heating/cooling • High-grade pharmaceutical design • Manhole with round pressure locking system • CIP piping system • J-tube / internal piping • Sight glass DN80 • Multiple reserve- and process connections • Biocontrol flanges • Heavy-duty mounting blocks / trunnion design • Lifting lugs • Nameplate with complete PED identification DOCUMENTATION – fully and structurally available • EU Declaration of Conformity • TÜV certificate with acceptance report (Module G) • TÜV design inspection and certification • 3.1 material certificates • Welder lists and work samples • Non-destructive test reports (RT, PT) • Dimensional inspection reports • Calibration certificates for manometers • Surface and manufacturing reports • Parts list • Detailed drawings (body, lid, CIP, J-tube, etc.) • Operating and maintenance manuals Complete digital documentation file available. CONDITION Fsdpfxjylnwye Abtsgc • Never used in production • Stock item • Internal surfaces as new • No corrosion • No signs of use • As-new industrial condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Chemical media • GMP production plants • Process and disposal systems SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking and documented FAT inspection. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.500 l, Oprema: dokumentacija / priročnik, BRINOX 3,500 L Batch Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBHI-3500 Tag No.: BH6770-BH1001 Serial Number: 1003460 Year of Manufacture: 2020 Condition: As new / unused Package 28: BH6770-BH1001 TECHNICAL DATA Product Type: Batch Tank / Pressure Vessel Working Volume: 3,500 litres Total Volume: 4,304 litres Jacket Volume: 202 litres Empty Weight: 1,958 kg Wetted Material: 1.4435 Jacket: 1.4404 CE Marking: CE 0036 Permissible Pressure Vessel PS: -1 / +3 bar Test Pressure Vessel PT: 5.6 bar Permissible Jacket Pressure PS: -1 / +6 bar Test Pressure Jacket PT: 10.8 bar Permissible Temperature TS: -10 °C to +150 °C Fluid Group: 2 Design Standard: AD 2000 Pressure vessel according to PED 2014/68/EU Category III Module G – Individual Inspection Notified Body: TÜV SÜD Industrie Service GmbH (Identification number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The tank was subjected to a complete FAT at the factory and released. Inspections performed include: • Pressure test according to PED • Visual inspection of all weld seams • Non-destructive examinations (RT, PT as per test plan) • Dimensional and drawing check (as-built) • Interior roughness measurement (Ra ≤ 0.8 µm) • Calibration check of pressure gauges • Verification of labelling • Complete documentation review Full FAT protocols available. DESIGN Fgodpfx Abeylng Ustsc • Cylindrical, horizontal tank • Double jacket with half-pipe coil • Internally electropolished and passivated • High-gloss polished product-contact surface • Pharmaceutical-grade weld seams • Manhole DN 500 • Powder/product inlet nozzle DN 300 • CIP connections • Safety valve • Pressure and temperature ports • Agitator connection • Heavy-duty trunnion mounting • Lifting lugs DOCUMENTATION – complete and structured Comprehensive project-specific quality and manufacturing documentation, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with acceptance report (Module G) • TÜV design review and certification • Material certificates 3.1 • Welder lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (RT, PT etc.) • Analysis certificates for welding consumables and gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy report • Internal pressure test report • Calibration certificates • Reports and EU conformity for installed components • Compilation with parts list • Partial drawings • Operating and maintenance manuals Complete digital documentation file available. CONDITION • Never in productive use • Stored as inventory • Internal surface absolutely as new • No corrosion • No signs of use • Absolutely mint industrial condition • Available immediately SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production facilities • Biotech applications SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with full PED Module G individual certification by TÜV SÜD, CE 0036 marking, and documented FAT test. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Process Vessel – 1.4435 – Double Jacket – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Fedpfx Absykuhietogc Tag No.: BH6726-BH1001 Type: SVMBBI-1500 Year of Construction: 2020 Serial No.: 1003458 Equipment No.: 20051401 CE Marking: CE 0036 Condition: As new / unused Empty Weight: 866 kg TECHNICAL DATA Product Type: Main Filling Vessel / Process Vessel Design: Cylindrical with dished heads Working Volume: 1,500 litres Total Volume: 1,785 litres Product-contact Parts Material: 1.4435 Jacket Material: Stainless steel (double-jacket design) Max. Permissible Pressure (PS) Vessel: -1 / +3 bar Test Pressure (PT): 5.4 bar Max. Permissible Temperature (TS): -10 °C / +150 °C Pressure vessel according to PED 2014/68/EU Module: G Fluid Group: 1 SURFACE & EXECUTION Internal Surface: High-gloss polished, pharmaceutical design Product-contact areas in 1.4435 Welds neatly ground Pharma CIP-capable design EQUIPMENT • Double jacket for heating/cooling • Large manway with clamp closures • Multiple instrument and process nozzles • Pressure sensor / temperature ports • Bottom outlet • CIP/spray ball connections • Various blank flanges • Insulated media connections on jacket • FDA-compliant seals CONDITION • Never used in production • Stored as stock • Interior absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – fully available • EU Declaration of Conformity • TÜV inspection documents • PED Module G documentation • 3.1 material certificates • Pressure test protocol (PT 5.4 bar) • Technical drawings • FAT documentation • Operating manual SPECIAL FEATURE Large-capacity BRINOX main filling vessel 1,500 L in 1.4435, PED Category IV Module G, CE 0036, with complete documentation, pharmaceutical surface finish and pressure test at 5.4 bar. Project quality for sterile applications – available immediately.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 1.500 l, Oprema: dokumentacija / priročnik, BRINOX 1,500 L Process Vessel – 1.4435 – Jacketed – PED Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6722-BH1001 Year of Manufacture: 2020 Condition: As new / unused CE Marking: CE 0036 TECHNICAL DATA Type: Main Vessel / Process Vessel Design: Cylindrical with torispherical (Klöpper) heads Working Volume: 94 – 1,500 litres Empty Weight: 866 kg Product contact material: 1.4435 Jacket material: 1.4307 Insulation: Fitted Operating Pressure (Vessel): -1 / +3 barg Max. Allowable Pressure (PS): -1 / +3 barg Test Pressure (PT): 5.4 bar Permissible Temperature (TS): -10 °C / +150 °C Pressure Test Date: 2020/04 Pressure vessel as per PED 2014/68/EU Category IV Assessment Procedure: Module G Notified Body: TÜV SÜD Industrie Service GmbH Design Code: AD 2000 SURFACES & WELDS Internal Surface: Electropolished and passivated Pharmaceutical-grade finish External Surface: Industrial ground finish NDT / Inspections: RT (Radiographic testing) PT (Dye penetrant testing) Documented pressure test 2020 EQUIPMENT • Double jacket for heating/cooling • Large frontal manway • Multiple process nozzles • CIP connections • Temperature and pressure connections • Safety fittings • Agitator mounting point • FDA-compliant seals • Complete piping module CONDITION • Never used in production • Warehouse stock • Internal surface absolutely as new • No corrosion • No signs of use • Immediately available DOCUMENTATION – Complete • EU Declaration of Conformity • TÜV certificates and acceptance reports • PED Module G documentation Fedpfx Abeykuc Tetegc • Material certificates 3.1 (EN 10204) • Welding protocols • NDT reports (RT / PT) • Pressure test report 2020 • Surface inspection reports • Detail and assembly drawings • FAT documentation • Operation and maintenance manuals SPECIAL FEATURE BRINOX pharma process vessel in 1.4435 with electropolished internal surface, AD2000 design, PED Category IV Module G, full TÜV acceptance in 2020, and complete technical documentation. Project quality for sterile applications – immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH6723-BH1001, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-Filling Vessel – 1.4435 – Double Jacket – PED Cat. IV Module G – TÜV – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Model: SVMMBI-1000 Tag No.: BH6723-BH1001 Serial No.: 1003454 Year of manufacture: 2020 CE Marking: CE 0036 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling / Process Vessel Nominal volume: 1,000 L Total volume: 1,400 L Empty weight: approx. 610–762 kg Product-contact material: 1.4435 (AISI 316L) Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 / +150 °C Fluid group: 1 Design according to AD 2000 Pressure vessel according to PED 2014/68/EU Category IV Module G – Individual Inspection Notified body: TÜV SÜD Identification number: 0036 TÜV CERTIFICATION EU Declaration of Conformity (Module G) Certificate No.: Z-EU-SI-LJU-20-05-2702107-19125214 Test Report No.: P-EU-SI-LJU-20-05-2702107-19125214 Final inspection according to PED Annex I No. 3.2 carried out Pressure test according to Annex I No. 3.2.2 carried out Accepted without deviations Permissible number of load cycles: 10,000 cycles (1.3 bar) Date of acceptance: 20.05.2020 FAT – Factory Acceptance Test Complete factory FAT performed: • Pressure test • Visual inspection of weld seams • NDT testing (RT/PT) • Dimensional check • Surface roughness measurement (≤ 0.8 µm) • Calibration test • Documentation verification FAT fully documented. CONSTRUCTION • Cylindrical, horizontal pressure vessel • Double jacket for heating/cooling • Internally electropolished • Pharmaceutical-grade welding • Manway DN 500 • CIP connection • Safety valve • Pressure gauge • Multiple process and measuring nozzles • Designed for pressure and vacuum operation CONDITION • Never used in production • Factory-tested • TÜV Module G certified • As-new industrial condition • No signs of use • Immediately available Fgodpfx Ajykqmzjbtec DOCUMENTATION Comprehensive, structured documentation available, including: • EU Declaration of Conformity • TÜV certificate with acceptance report • TÜV design inspection • FAT protocols • Material certificates to EN 10204 3.1 • WPS/WPQR and welder lists • NDT reports • Surface roughness protocols • Internal pressure test reports • Dimensional protocols • Calibration certificates • Parts list and drawings • Operating and maintenance manuals Digital documentation file available. • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP plants • Biotechnology High-end BRINOX pharmaceutical design with PED Cat. IV Module G individual inspection by TÜV SÜD (CE 0036) and complete FAT documentation. Not a standard tank – certified project quality. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: BH6721-BH1001, kapaciteta rezervoarja: 1.000 l, Oprema: dokumentacija / priročnik, BRINOX 1,000 L Pre-filling Tank – 1.4435 – Double Jacket – PED Module G – TÜV SÜD – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Type: SVMBBl-1000 Tag-No.: BH6721-BH1001 Serial number: 1003453 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: Pre-filling tank / process vessel Nominal capacity: 1,000 liters Total capacity: 1,400 liters Empty weight: 762 kg Product contact material: 1.4435 (AISI 316L pharmaceutical grade) CE marking: CE 0036 Permissible pressure PS: -1 / +3 bar Test pressure PT: 5.4 bar Permissible temperature TS: -10 °C to +150 °C Fluid group: 1 Design in accordance with AD 2000 regulations Pressure vessel in accordance with PED 2014/68/EU Fodpfx Aboykpqrotogc Category IV Module G – Individual inspection Notified body: TÜV SÜD Industrie Service GmbH (identification number 0036) TÜV approval including final inspection and pressure test, fully documented. FAT – Factory Acceptance Test The vessel was fully FAT tested and released at the factory. Tests performed include: • Pressure test to PED • Visual inspection of all weld seams • Non-destructive testing (RT, PT per testing plan) • Dimensional and drawing verification (as-built) • Internal surface roughness measurement (Ra ≤ 0.8 µm) • Calibration test of pressure gauges • Check of labeling • Complete documentation check FAT protocols fully available. DESIGN • Cylindrical, horizontal vessel • Double jacket for heating/cooling • Internally electropolished and passivated • Highly polished product contact surface • Pharma-grade weld seams • Manway DN 500 • CIP connections • Safety valve • Pressure gauge • Bottom diaphragm valve • Agitator connection (DN 200) • Multiple spare connections • Heavy-duty trunnion bearing/mount • Transport and lifting device DOCUMENTATION – fully available and structured Extensive project-related quality and manufacturing documentation available, including: • EU Declaration of Conformity and warranty certificates • TÜV certificate with inspection report (Module G) • TÜV design test and certification • Material certificates 3.1 • Welder lists and welding procedure qualification records (WPQR/WPS) • Non-destructive testing reports (RT, PT, etc.) • Analysis certificates for welding consumables and shielding gases • Company qualification certificate • Roughness protocol • Surface treatment report • Dimensional accuracy inspection report • Internal pressure test report • Calibration certificates of pressure gauges • Reports and EU conformity of installed components • Compilation with parts list • Component drawings • Operating and maintenance manuals Full digital documentation folder available. CONDITION • Never used in production • Stored as stock • Internal surface absolutely as new • No corrosion • No signs of use • Industrial as-new condition • Immediately available SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Buffer and media preparation • Sterile liquid processes • GMP production plants • Biotechnological applications SPECIAL FEATURE High-quality BRINOX pharmaceutical manufacturing with complete PED Module G individual approval by TÜV SÜD, CE 0036 marking, and documented FAT testing. Not a standard tank – but certified project quality with comprehensive GMP-compliant documentation. Immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 30.000 l, Oprema: dokumentacija / priročnik, BRINOX 30,000 L WWAS / Solution Tank – 316L – PED – FAT – Complete GMP Documentation – Incl. Saddle Support – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: LV6456-BH1001 Serial Number: 1003464 Year of Manufacture: 2020 Condition: As new / unused Location: Europe LV6456-BH1001 Package 66 TECHNICAL DATA Product type: WWAS / Solution Tank / Pharmaceutical Process Vessel Working Volume: 30,000 liters Total Volume: 33,213 liters Product-contact material: Stainless steel 1.4404 (AISI 316L) Surface finish: Chemically pickled, passivated, and cleaned Surface roughness: Ra < 1.6 µm Standards and Guidelines: • PED 2014/68/EU compliant • CE marking present • GMP-compliant pharmaceutical design Pressure Data: Min.: –0.14 bar(g) Max.: +0.5 bar(g) Test pressure: 0.72 bar(g) Temperature range: –20 °C to +50 °C Hydrostatic pressure test performed. FAT – Factory Acceptance Test A fully documented FAT carried out, including: • Dimensional, visual and identification check • Weld inspection and NDT • Pressure test according to PED • Testing of all nozzles/connections • Documentation and quality inspection FAT fully passed. FAT report available. DESIGN / CONSTRUCTION • Horizontal pharmaceutical process vessel • Stainless steel 316L, pharmaceutical grade • Internal surface pickled and passivated • Hygienic, GMP-compliant construction Connections, incl.: • Manway DN500 • Inlet DN100 • Outlet DN50 • Measurement, safety and process connections Mechanical design: • Original BRINOX stainless steel saddle support included • Heavy-duty construction • Lifting points for crane handling available CONDITION • Absolutely new condition • Never installed or used in production • Never filled with product • No corrosion or signs of use • Original industrial packaging available • Immediately available Fedoykngfopfx Abtegc Saddle support also in new condition and part of scope of delivery. DOCUMENTATION – fully available (GMP-compliant) Comprehensive manufacturer and project documentation incl.: • EU Declaration of Conformity and CE documentation • PED documents • Material certificates EN 10204 – 3.1 • Welding documentation (WPS / WPQR, welder lists) • NDT test reports • FAT protocol and pressure test report • Roughness and surface protocols • Calibration certificates • Partial drawings and parts lists • Operating and maintenance manuals Documentation fully available in digital form. TRANSPORT AND PACKAGING • Professional export packaging available • Original industrial packaging • Crane handling possible without issue • Worldwide shipping possible SUITABLE FOR • Pharmaceutical industry • Biotechnology • WWAS, WFI, and PW systems • Sterile process solutions • GMP production plants SPECIAL FEATURE Project surplus from an international pharmaceutical new build project, with complete FAT, PED compliance and GMP documentation. Large-volume BRINOX 30,000 L pharmaceutical process vessel in new plant quality incl. saddle support – immediately available

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 9.000 l, Oprema: dokumentacija / priročnik, BRINOX 9000 L GMP Washing and Elution Solution Tank Horizontal Stainless Steel Pressure Vessel – Year of Manufacture 2020 – Complete FAT & GMP Documentation BH6752-BH1001 Package 32 Manufacturer: BRINOX Process Systems Serial Number: 1003558 Year of Manufacture: 2020 Nominal Volume: 9,000 liters Design: GMP-compliant stainless steel pressure vessel Application The tank was used in a pharmaceutical production facility. Suitable for the production, storage, and supply of process solutions in GMP-regulated environments. Construction and Equipment Cylindrical stainless steel tank in horizontal design End-face process connections Large manway with pressure closure Integrated CIP system with spray ball High-gloss polished internal surface Hygienic, product-contacting connections Multiple measuring and instrumentation nozzles Documented weld seams with full traceability Separate stainless steel feet included in delivery Condition Very good optical and technical condition. Internal surfaces are mirror-polished and clean. No visible damage to the shell or connections. Accessories and auxiliary components are present as per photo documentation. FAT and Documentation Status According to FAT documentation “IT-11.1 Welding Documentation Inspection”, the welding documentation was inspected as part of factory acceptance testing (FAT 01, 23.10.2020). The following were confirmed, among others: Identification of welders and weld seam inspectors Fgodpfsykkk Hsx Abtjc Welder qualifications per EN ISO 9606-1 WPS and WPQR documentation Proof of shielding gas suitability Documented test welds Spot sample visual inspection without defects Traceability according to material certificates 3.1 The complete welding documentation is included in the Turn-Over-Package. Documentation – Fully Available FAT plan and FAT report Layout and construction drawings P&ID diagrams Calibration protocols Surface and roughness tests Leak test Welding plan WPQR WPS Welder qualifications Borescopy report Incoming goods inspection reports Sensor calibrations The complete technical documentation is available in digital format. Special Features Fully documented GMP version with certified welding documentation and comprehensive quality package. Very well suited for reinstallation in pharmaceutical production plants or validation-required applications.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 9.000 l, Oprema: dokumentacija / priročnik, BRINOX 9,000 L Washing Solution Tank – 316L – Double Jacket – TÜV / PED – As-new Condition Manufacturer: BRINOX d.o.o. Tag-No.: BH6751-BH1001 Package 31 Year of manufacture: 2020 Condition: As-new / unused Technical Data Product type: Washing solution tank Nominal volume: approx. 9,000 litres Product-contact material: 1.4404 (AISI 316L) Design: horizontal construction CE marking: present Pressure vessel in accordance with PED 2014/68/EU TÜV-inspected with acceptance report Double jacket for heating/cooling available Designed for pharmaceutical applications Internal surface: • High-gloss polished • Pharmaceutical-grade weld seams • Documented surface quality Design / Equipment • Heavy-duty custom fabrication in stainless steel 316L Fedpfx Ajykkivsbtsgc • Large-dimension manhole with pressure-resistant closure • Integrated CIP spray lances / cleaning pipes • Multiple clamp and flange fittings • Instrumentation ports (pressure, temperature, sensors) • Robust lifting and carrying lugs • Heavy, industrial-grade construction • External pipe runs and process connections pre-installed • Excellent accessibility for maintenance and inspection The photos clearly show the high manufacturing quality, clean welds, and mirror-polished, product-contact interior surface. Condition • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • As-new industrial condition • Immediately available Suitable for • Washing solutions in pharmaceutical processes • WFI / PW applications • CIP media • Buffer and process solutions • Biotechnology • GMP production facilities • Sterile liquid processes Documentation – complete and well-structured A comprehensive, project-specific quality and manufacturing documentation is available for the vessel, including: • EU declaration of conformity and warranty certificates • Reports and EU component verifications • Assembly documentation • Part drawings • TÜV certificate with acceptance report • Nameplate documentation • TÜV design review and certification • Welders’ qualification lists, welding procedure certifications, work samples • Analysis certificates for welding consumables • Analysis certificates for shielding gas • Manufacturer’s qualification certificate • Nondestructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Pressure test record • Dimensional accuracy check • Surface roughness protocol • Surface treatment report • Operating and maintenance manuals (device) • Operating and maintenance manuals (components) • FAT documentation (Factory Acceptance Test) Complete documentation folder available digitally. Special Feature This is not a standard tank, but a high-quality custom project fabrication built to true pharmaceutical standards with certified pressure design, documented manufacturing, and full PED conformity including TÜV approval. Heavy-duty construction, generously sized connections, and CIP integration make this tank ideal for demanding GMP applications.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.200 l, Oprema: dokumentacija / priročnik, BRINOX 3,200 L Solution Tank – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Package 17 Manufacturer: BRINOX d.o.o. Tag-No.: BH6762-BH1001 Year of manufacture: 2020 Condition: As new / unused TECHNICAL DATA Product type: ELUTION / Solution Tank Capacity: 3,200 liters Material: 1.4404 (AISI 316L) CE marking: Present (CE 0036) Tank pressure: Operating pressure: -1 / +3 bar Test pressure: According to TÜV approval Jacket pressure (heating/cooling jacket): Operating pressure: -1 / +6 bar Test pressure: According to TÜV approval Temperature range: -20 °C to +150 °C Pressure vessel according to PED 2014/68/EU Module G – Individual inspection Acceptance by notified body (ID number 0036) FAT – Factory Acceptance Test The tank was inspected as part of a documented FAT process. The tests included, among others: • Welding documentation inspection • Visual inspection of weld seams • Leak test • Pressure test • Surface roughness test • Sensor calibration test • Layout and dimensional inspection • Documentation review Complete FAT report including all test protocols available. SPECIFICATION • Double jacket for heating/cooling • Completely made of stainless steel 316L • Mirror-polished internal surface • Pharmaceutical-grade weld seams • CIP/SIP-capable connections • Multiple manholes/revision openings • Clamp and flange connections • Instrumentation prepared (pressure, temperature, sensor technology) • Heavy-duty project configuration • Lifting lugs for crane handling CONDITION • Never used in production • Stock item from project surplus • Interior absolutely clean • No corrosion • No signs of use • Industrial as-new condition • Immediately available Fodpfxjykkhrs Abtegc DOCUMENTATION – complete and well-structured Comprehensive, project-specific quality and manufacturing documentation is available for the tank, including: • EU Declaration of Conformity and Warranty Certificates • TÜV certificate with acceptance report • TÜV design inspection and certification • Material certificates (3.1) • Welders’ lists and welding procedure qualifications (WPQR/WPS) • Non-destructive test reports (NDT) • Analysis certificates for welding filler metal and shielding gas • Surface roughness protocol • Surface treatment report • Dimensional accuracy inspection • Internal pressure test • Calibration certificates • Assembly documentation • Part drawings • Operating and maintenance manuals Complete documentation folder available digitally. SUITABLE FOR • Pharmaceutical solutions • WFI / PW systems • Elution / buffer preparation • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media SPECIAL FEATURE This is not a standard tank, but a premium BRINOX project-built unit in genuine pharmaceutical quality with certified pressure design, full PED conformity (Module G), documented FAT inspection, and extensive quality documentation. Project-quality for sterile applications – immediately available.

Stanje: novo, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, kapaciteta rezervoarja: 3.200 l, Oprema: dokumentacija / priročnik, BRINOX 3,200 L Solution Vessel – 316L – Double Jacket – TÜV / PED Module G – FAT – 2020 – As New Manufacturer: BRINOX d.o.o. Tag No.: BH6761-BH1001 Serial Number: 1003446 Year of Manufacture: 2020 Condition: As new / unused Technical Data Product Type: ELUTION / Solution Vessel Volume: 3,200 litres Empty Weight: 1,815 kg Material: 1.4404 (AISI 316L) CE Marking: CE 0036 Vessel Pressure Operating Pressure: -1 / +3 bar Test Pressure: 4.6 bar Jacket Pressure (Heating/Cooling Jacket) Operating Pressure: -1 / +6 bar Test Pressure: 10.8 bar Temperature Range: -20 °C to +150 °C Pressure Vessel in accordance with PED 2014/68/EU Module G – Single Inspection Notified Body: TÜV SÜD (Identification No. 0036) Permitted Number of Load Cycles: 7,300 / 5,475 at a pressure fluctuation of 3.3 / 4.5 bar TÜV / PED / FAT • EU Declaration of Conformity as per 2014/68/EU • Certificate Number: Z-EU-SI-LJU-20-08-2350154-14124056 • Test report available • Hydraulic pressure test successfully completed • Acceptance by TÜV SÜD Industrie Service GmbH • Factory Acceptance Test (FAT) performed • Module G individual inspection • Turn-Over Package (TOP) fully available Complete documentation available The full technical documentation package is present, including: • EU Declaration of Conformity and Warranty Certificates • TÜV certificate with final inspection report • TÜV design review and certification • Nameplate documentation • General assembly drawings • Part drawings • Welder lists and Welding Procedure Qualifications • Work samples • Analysis certificates for welding consumables • Analysis certificates of welding gases • Manufacturer qualification certificate • Nondestructive testing (NDT) reports • Material certificates (3.1) • Calibration certificates • Internal hydrotest report • Dimensional accuracy verification • Surface roughness protocol • Surface treatment report • Operation and maintenance manuals (vessel and components) Documentation scope meets pharmaceutical plant project standards. Design Features • Double jacket for heating and cooling Fodpfx Aeykkbxjbtegc • Constructed entirely from stainless steel 316L (1.4404) • Mirror-polished internal surface • Pharmaceutical-grade welds • CIP/SIP-compatible connections • Multiple manways / inspection openings • Clamp and flange connections • Instrumentation provisions (pressure, temperature, sensors) • Robust project-quality fabrication • Lifting lugs for crane handling • Pressure design in accordance with PED Condition • Never used in production • Stock item from project surplus • Absolutely clean interior • No corrosion • No signs of use • In factory-new industrial condition • Immediately available Suitable for • Pharmaceutical solutions • WFI / PW systems • Elution / buffer production • Sterile liquid processes • Biotechnology • GMP production facilities • CIP media Special features This is not a standard tank, but a high-end BRINOX project build in true pharma quality, featuring: • PED Module G individual inspection • TÜV SÜD acceptance • FAT conducted • Complete welding, material and inspection documentation • Documented surface treatment • 316L design for sterile applications Project quality for demanding GMP applications – available immediately.