Stroj za upogibanje

Zopf T 400 Multi

Stanje: dober (rabljeno), Leto izdelave: 1999, Stroj je v dobrem stanju. X 750 mm Y 400 mm Dujdpowx Rafofx Abtju Z 500 mm 10.000 vrt/min

Stanje: novo, Cutting capacity at 90 degrees, round: 240 mm Cutting capacity at 90 degrees, square: 240 mm Cutting capacity at 90 degrees, rectangular: 165 x 310 mm Saw band length: 2725 x 27 x 0.9 mm Table height: 890 mm Band speed: 35 / 70 m/min Total power requirement: 1.1 kW Dodpfx Abohpktvjtouu Machine weight approx. 0.35 t Dimensions (LxWxH): 1.7 x 0.75 x 1.8 m The Z252/DG is equipped with the following features: - Hydraulic cylinder - Emulsion pump - Eccentric clamp - Base frame - Saw band - 400V plug -16A- The machine is delivered fully assembled and ready for immediate operation.

Stanje: rabljeno, Clamping Plate – Table of a Long Planer Machine – Duodpfxebn Amfj Abteu Table Width / Clamping Width: 1845 mm Table Length / Clamping Length: 5505 mm 7 longitudinal T-slots for T-slot nuts: M30 T-slot spacing: 263 mm Total length: 6230 mm Total plate height: 350 mm Weight: 11 t

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2007, obratovalne ure: 22.605 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 100 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.600 mm, širina bale: 1.100 mm, višina bale: 1.100 mm, teža bale: 1.400 kg, skupna masa: 36.000 kg, kapaciteta rezervoarja za olje: 1.300 l, leto zadnje generalne obnove: 2025, For sale: Fully reconditioned baler with 100 t pressing force, large bale size 1100 x 1100 mm, 75 kW drive power, and 10-fold cross-tying. Technical data – Baler: Manufacturer: Bollegraaf Model: HBC 110 K / 75 kW Year of manufacture: 2007 Main ram pressing force: 100 t Pre-pressing force: 50 t Operating hours: 22,605 hours Feed opening dimensions: 1,600 x 1,100 mm Filling volume / press cycle: 3.15 m³ Theoretical cycle time: 19 seconds Bale size: 1,100 x 1,100 mm Drive power: 75 kW Total connected load: 126 kW Total current draw: 238 A Tying: 5-fold vertical, 5-fold horizontal, fully automatic Throughput rates at a bulk density of 30 kg/m³: approx. 16 t/hour bulk density of 50 kg/m³: approx. 25 t/hour bulk density of 100 kg/m³: approx. 47 t/hour Bale weights up to 1,400 kg, depending on material and bale length Hydraulic tank capacity: approx. 1,300 l PLC control: Telemecanique TSX Micro Operator panel: Schneider MAGELIS Touch Installed baler dimensions with hopper: 11,750 x 5,000 x 7,105 mm (L x W x H) Transport dimensions baler only: 11,765 x 2,500 x 3,450 mm (L x W x H) Machine weight baler: approx. 36 t Dujdpfx Abjvf E Avjteu Notes: The baler was partially reconditioned, serviced, tested after completion, and stored in our workshop. The machine is available at short notice and can be inspected at our warehouse by appointment. The following refurbishment work was performed: - Removal of rust and partial repainting of the press - Complete drainage of hydraulic oil tank, oil and air filters replaced - New hydraulic oil filled - All hydraulic hoses replaced - Main hydraulic cylinder, two pre-press flap cylinders, and compression channel cylinder removed, disassembled, inspected, cylinder tubes honed, all seal kits replaced, and final pressure test conducted - Pre-press flap disassembled with bearings and bearing blocks; first and third arc segments removed and rewelded - Both shaft bearings on the pre-press flap replaced - Upper material guide on pre-press flap frame replaced - Press ram dismantled, inspected, and both front guide rollers replaced - Material guides and wear plates on sides and base of press ram removed and rewelded - Horizontal and vertical needle and tying units dismantled, disassembled, inspected; plastic slide plates, twister shaft bearings, and wire deflector pulleys with bearings in the needle heads replaced - Both bronze slide rails left and right in the frame cover for the press ram replaced - Both wire deflection units left and right, with bale retention clamps completely replaced - Wire feed unit including hydraulic cylinder under needle passages completely renewed - Wire feed tracks in the floor and sidewalls of the press channel welded up and smoothed - General maintenance and servicing carried out according to manufacturer’s specifications - Baler tested in manual and automatic mode after refurbishment, accepted, and stored We accept no liability for the technical data or any potential errors.

Stanje: generalkompletno obnovljen (rabljeno), skupna masa: 7.800 kg, Jaw opening: 650 x 450 mm Throughput: 12 - 60 m³/h Gap width: 35 - 150 mm Dodpoq Tth Tefx Abtjuu Weight: 7,800 kg Power requirement: 45 kW completely workshop overhauled and newly fitted with bearings

Stanje: novo, Model designation Shark 332-1 CCS Djdpfxjgvquwo Abtjuu

Stanje: novo, Leto izdelave: 2024, Bending force: 320 t Dsdpfx Absfifg Hotouu Year of manufacture: New (delivery time 6-8 weeks) Control: DT 15 Bending length: 3050 mm Distance between uprights: 2600 mm Y rapid traverse speed: 160 mm / s Y working speed: 10 mm / s Y return speed: 140 mm / s Motorized crowning Table length: 630 mm Table width: 154 mm Table height: 900 mm Stroke: 365 mm Throat depth: 410 mm 2 support arms 2 rear stop fingers Travel speed X-axis: 250 mm / s R-axis working speed (max.): 140 mm / s R-axis travel range: 250 mm Standard equipment: Y1, Y2, X (3-axis) Y1, Y2, X = 650 mm (dual guideway, aluminium) D-BEND software for 3D bending simulation and alignment Manual crowning R-axis, manual Backgauge with motorized adjustment, linear guide and ball screw Backgauge finger with height adjustment (R-axis, manual) CE die holder system (upper dies) Front sheet support arms, sliding (with T-slot and stops) Hydraulic blocks and valves in special design according to internationally recognized standards Electrical equipment according to internationally recognized standards Options: CE standard with manual Fiessler AKAS II M -FPSC-B-C (SAFETY PLC) CNC motorized crowning Y1, Y2, X, R (4 axes) CNC motorized crowning Motor power: 37 kW Oil tank capacity: 250 l Length: 4300 mm Width: 1820 mm Height: 3230 mm Weight: approx. 17,250 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Funkcionalnost: popolnoma funkcionalen, Stroj je pravkar prispel in bo kmalu očiščen. Premer struženja nad ležiščem: 400 mm Dedpfsyh Ndwox Abteuu Razdalja med konicama: 1000 mm Velikost vretena: 50 mm Velikost vpenjalne glave: 200 mm Območje hitrosti: 40–2000 obr/min Teža stroja: 1700 kg Vključuje 3-čeljustno vpenjalno glavo in držalo orodja.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2000, obratovalne ure: 25.000 h, potovalna razdalja osi X: 10.300 mm, pomik osi Y: 2.000 mm, pomik po osi Z: 1.800 mm, hitrost pomika os X: 10 m/min, hitrost podajanja osi Y: 10 m/min, hitrost podajanja os Z: 10 m/min, položaj glave za glodanje: 2.5 x 2.5 °, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 60 obr/min, širina mize: 3.300 mm, dolžina mize: 12.000 mm, montažni premer: 50 mm, skupna višina: 48.750 mm, skupna širina: 100.000 mm, skupna dolžina: 212.000 mm, skupna masa: 100.000 kg, Duplex-Fräsmaschinen bestehen aus zwei Maschinen, die einander gegenüber angeordnet sind und entweder separat oder als eine Einheit betrieben werden können. Das Werkstück kann dabei mit zwei simultan arbeitenden Spindeln bearbeitet werden. Produktivitätssteigerung von bis zu 50 % im Vergleich zu konventionellen Lösungen, also Einzel-Fräsmaschinen Verbesserte Bauteilgenauigkeit, da die Bearbeitung in den meisten Fällen in nur einer Aufspannung erfolgt Ein einziger Bediener kann die DUPLEX-Fräsmaschinen steuern Geringerer Platz- und Investitionsbedarf im Vergleich zu zwei Einzelmaschinen Schnelle Amortisation der Investition aufgrund der hohen Produktivität DUPLEX-Lösungen ermöglichen verschiedene Konfigurationen: Einzelner Arbeitsraum oder Pendelbearbeitung Geeignet zur Bearbeitung von Baggerarmen/-auslegern wie z.B. von CAT, Caterpillar, Komatsu, Hitachi, Hyundai, Doosan, Case, Bobcat, JCB, Kobelco, Liebherr, Kubota, Takeuchi, Volvo X-Achse: 10.300 mm Y-Achse: 2.000 mm Z-Achse: 1.800 mm Tischlänge: 12.000 mm Tischbreite: 3.300 mm Tischbelastung: 100.000 kg Spindelleistung: 22/30 kW Spindeldrehzahlen: 60 - 3.000 min⁻¹ Spindelaufnahme: 50 ISO / BT / MK Vorschub X-Achse: 10.000 mm/min Vorschub Y-Achse: 10.000 mm/min Vorschub Z-Achse: 10.000 mm/min Fräskopf, automatisch indexierend: 2,5 x 2,5° Betriebsstunden: 25.000 h Länge: 21.200 mm Dedpfjrx Rxtsx Abtouu Breite: 10.000 mm Höhe: 4.875 mm Gewicht: 100.000 kg

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2002, CNC Vertical Machining Center MIKRON VCP 800 W With Heidenhain iTNC 530 path control Year of manufacture: 2002 Travel paths: X 800 mm, Y 650 mm, Z 500 mm Spindle speed range: 0 – 20,000 rpm, stepless Including the following accessories: Rigid angle table 900 mm x 600 mm clamping surface Vertical tool changer with 30 magazine slots (HSK 63) Fully enclosed cabin with sliding doors and interior lighting Electronic handwheel Dodpfx Ajviq U Eobtjuu Tool measurement in the working area (BLUM laser) 3D infrared touch probe Renishaw Chip conveyor Coolant system 4 adjustable leveling machine feet Operating manuals