Stroj za rezkanje portalov

ZIMMERMANN FZ 33c

x-travel 2500 mm
y-travel 3000 mm
z-travel 1250 mm
CNC control HEIDENHAIN iTNC 530
Spindle speed 22000 rpm
Tool holder HSK A-63
Spindle motor 60 kW
Swivelling spindle head +/- 110°
c-axis 360°
Tool changer with 50 positions
Table size - longitudinal 2500 mm
Table size - transverse 3250 mm
Coolant system 40 bar
Machine weight approx. 60 t
Space requirements approx. 7.6 x 7.3 x 5.7 m
Hfjdpfxswlvrmo Ah Don
This ZIMMERMANN FZ33c is in very good condition.
The machine is immediately available.

Description:
Technical Data of the System and Working Areas
X-axis 2500 mm
Y-axis 3000 mm
Z-axis 1250 mm
A-axis ±110°
C-axis ±300°

Including vibration sensor
Including bearing temperature sensor
Including rotary union for internal coolant supply (IKZ)
5-axis trajectory control: Heidenhain iTNC 530 / Handwheel HR520, 15" TFT color display
Extraction system Keller Vario P1
Machine enclosure with roof
50-position tool changer, chain magazine, rear-mounted
Chip conveyor, discharge 60° left, at front end
Probe Renishaw RMP60
Blum laser tool measurement "Control NT-Micro"

Clamping table
Length x width x height 2500 x 3250 x 400 mm
Table load capacity 8000 kg/m² (max. 16000 kg)
T-slots, longitudinal 18H12
Distance between T-slots 250 mm

Dimensions, Weights
Footprint (without peripheral devices) approx. 7600 x 7300 x 5650 mm
Total weight approx. 53500 kg

Electrical connection values
Voltage (three-phase) 400 V
Frequency 50 Hz
Fusing see installation plan
Power requirement see installation plan

Compressed air connection (on site)
Required air pressure 6 bar
Average air consumption approx. 15 m³/h (depending on machine equipment)

Drives linear axes
Feed rate X-, Y-, Z-axis 60 m/min
Acceleration X-, Y-, Z-axis up to 5 m/s²

Drives rotary axes – VH30
Feed rate A-, C-axis 360 °/s
Acceleration A-, C-axis 700 °/s²
Resolution A-, C-axis 0.0001°

Accuracy linear axes – according to VDI/DGQ 3441
Positioning accuracy X-axis P= 0.026 mm
Y-axis P= 0.028 mm
Z-axis P= 0.020 mm
Repeatability X-axis Ps= 0.015 mm
Y-axis Ps= 0.016 mm
Z-axis Ps= 0.010 mm
Measuring system resolution (interpolated) A-, C-axis 0.0001°

Rotary axes accuracy – VH30
Positioning accuracy A-, C-axis P= 12" = 0.0033°
Repeatability A-, C-axis Ps= 8" = 0.0022°

Milling head VH30
2-axis milling head: VH30,
Milling spindle Siemens Weiss
Spindle power S1 (100% duty cycle) 60 kW,
Spindle speed 22,000 rpm, 95 Nm, HSK-A63
Fork head external dimensions L x W approx. 500 x 600 mm
Nominal torque rotary axes closed loop A: min. 1200 Nm, C: min. 1047 Nm
Clamped A- and C-axis: 3000 Nm
(Permanent grease lubrication with automatic re-lubrication)
Swivel axis - spindle nose 326 mm
Tool holder HSK 63 A
Tool clamping spring tension
Tool unclamping hydraulic
Permissible tool weight 4.5 kg (manufacturer specification)

Coolant supply external and internal
Coolant-lubricant supply (emulsion) at the front of the milling spindle with
band filter system
Volume 1500 l
Pump 1: 40 l/min at 20 bar
Pump 2: 20 l/min at 40 bar
Blow air at the front of the milling spindle

Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.