Stroj za brušenje površin - horizontalni

ZIERSCH ZT 510

Stanje: rabljeno, Leto izdelave: 2012, Grinding length: 1,000 mm Grinding width: 600 mm Workpiece height approx.: 400 mm Control: Z-Control Travel paths: • Cross travel: 550 mm • Longitudinal travel: 1,400 mm Distance from table surface to spindle center: 600 mm Max. table load incl. magnet: 1,000 kg Magnetic chuck: 1,000 x 510 mm Feed rates: • Cross: 0.01 – 2,000 mm/min • Longitudinal: 1,000 – 30,000 mm/min • Vertical: 0.001 – 1,500 mm/min Grinding spindle: • Speed range – grinding spindle: 1,000 – 3,600 rpm • Drive power – grinding spindle: 11 kW Grinding wheel dimensions: 400 x 80 x 127 mm Total power requirement: 21 kW Iedpfxjt An D Hj Af Tstb Machine weight approx.: 6.0 t Space requirement approx.: 5.5 x 4.0 x 3.0 m CNC Surface Grinding Machine Manufacturer: ZIERSCH – Model: ZT 510 - Surface grinding - Plunge grinding - Roughing / finishing / spark-out

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding Itodpouxfucefx Af Tjb - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o

Stanje: dober (rabljeno), Leto izdelave: 2019, Niles N 40 MC - 6000 stružno-rezkalni center, letnik 2019, krmiljenje Siemens SI 840 D SL, X/Z 850/6820 mm, Y-os -200 / +400 mm, B-os 0,001°, vrtljivi razpon B-osi -105° / +95°, menjalnik orodij s 192 mesti, C-os glavnega vretena 0,001°, hitrost vretena do 1750 vrt/min, 2 prestavi v menjalniku, največja teža obdelovanca med vpenjalom in konjičkom 6.000 kg, pogonska moč 87 kW, vpenjanje HSK 100, luneta 70 - 425 mm, konjiček. Isdpfx Afjw T Ag Eo Tstb

Leto izdelave: 2008, Stanje: skoraj kot novo (rabljeno), Polytype 8-color cup printing machine, model BDM 691, year 2008 Colors: 8 colors Isdpfx Ajhbdacsf Tjtb Maximum output/hour: 36,000 cups/hour Minimum cup diameter: 60 mm Maximum cup diameter: 100 mm Minimum cup height: 35 mm Maximum cup height: 160 mm UV system: Uviterno Pretreatment: Corona, Arcotec Reference: B-21020

Stanje: novo, ELMAG Stone Band Saw STBS-500 STBS for Dry Cutting (Bricks, Aerated Concrete, Insulation Material) The stone band saws of the STBS series are specifically designed for use on construction sites. When used for dry cutting, they are suitable for precise processing of materials such as aerated concrete, bricks, lightweight clay blocks, expanded clay, and wood, but also for insulation boards like Styropor and Styrodur. ADVANTAGES • Extraction port for dust extraction available • Saw band tension easily and optimally adjustable with handwheel • Includes forklift pockets and lifting eye • Constant saw band tension and 440 mm running wheels for reduced risk of band breakage and precise cuts • Direct drive with geared motor on separate motor console Isdpfx Afet Egfzs Totb • Automatic saw band shutdown at end of cut • Machine stops when doors are opened • Short band change times • Straight, mitre, and manual contour cuts possible • Precise blade guide, adjustable to stone height • Easy relocation thanks to transport wheels and transport bar TECHNICAL DATA Cutting height: 500 mm Cutting length: 660 mm Angle: 0 - 45° Saw band dimensions: 3850x27 mm Table size: 710x1060 mm Nominal power: 1.85 kW Power supply: 230/50 V/Hz Dimensions: 1050x900x1840 mm Weight: 203 kg

Stanje: rabljeno, Leto izdelave: 2022, vpenjalna sila: 320 kN, delovna prostornina: 1.068 cm³, tlak vbrizgavanja: 2.120 letvica, skupna masa: 14.000 kg, delovne ure: 2.907 h, premer polžastega transporterja: 65 mm, Dobavni pogoji: FCA Pegnitz Itedpfx Aoxluk Sof Tjb Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto

Stanje: dober (rabljeno), Leto izdelave: 1988, Operating voltage: 380 V Connected load: 7.5 kVA Dimensions: 2725 x 1930 x 1773 mm Machine weight approx. 2500 kg Technical Data – Main Specifications: - Table surface: 605 x 300 mm - Max. table longitudinal travel (manual): 750 mm - Table cross travel: 340 mm - Grinding height between table and new grinding wheel min./max.: 22.5 / 322.5 mm - Standard size of magnetic chuck: 600 x 300 mm - Workpiece weight incl. magnet: 420 kg X axis / Longitudinal travel: - T-slots (number x width): 3 x 17 mm - Table feed, hydraulic: 0.3 – 25 m/min - Travel per handwheel revolution: 47 mm Y axis / Vertical travel: - Automatic vertical feed – Coarse, 12 steps: 0.001 – 0.03 mm - Automatic vertical feed – Fine, 8 steps: 0.001 – 0.01 mm Itsdpfx Aew Dvkaef Tsb - Travel per handwheel revolution (x1/x10): 0.1 / 1.0 mm - Dial graduation on handwheel (x1/x10): 0.001 / 0.1 mm - Spark-out strokes: 0 – 5 - Rapid traverse: 400 mm/min Z axis / Cross travel: - Automatic cross feed, intermittent: 0.5 – 20 mm - Automatic cross feed / rapid traverse, continuous: 0.1 – 1.0 m/min - Travel per handwheel revolution: 5.0 mm - Dial graduation on handwheel: 0.02 mm Standard grinding wheel: - Diameter x width: Ø 355x38 (50) mm - Bore: Ø 127 mm - Speed: 1500 min⁻¹ Accessories: Various grinding wheels Documentation

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: Itedpfxet Hxamj Af Tjb • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, Offered for sale is an external cylindrical grinding machine EMAG Weiss WPG 7 – top-level external cylindrical grinding in a compact footprint. The footprint of the WPG 7 is only 1,800 x 2,400 mm. This machine is perfectly suited for machining small shafts or gears. The WPG 7 can be loaded manually or equipped with automated solutions such as chain conveyors and linear gantries. CONTROL SYSTEM Fanuc 0i TECHNICAL DATA Itsdpfx Aetlrkbsf Teb Workpiece length: max. 250 mm Grinding diameter: max. 80 mm Centre height: 100 mm Centre distance: 380 mm Workpiece weight: max. 30 kg Grinding wheel diameter: max. 500 x 80 mm Price, delivery time, and machine configuration upon request.

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), Manipulator with hydraulic height adjustment, faceplate with clamping slots, and handheld remote control. Height (faceplate horizontal): approx. 532 – 1,132 mm Stroke/travel distance (hydraulic): approx. s = 600 mm, t = 20 s Faceplate swivel range: approx. ±300° Height (axis, faceplate vertical): approx. 709 mm Faceplate dimensions: Ø1,200 mm x 40 mm, 6x clamping slots Itodpefw Ah Rsfx Af Tob Main spindle speed: approx. 2.0 rpm (others on request) Main spindle torque: approx. 7,500 Nm Faceplate speed: approx. 2.5 rpm Faceplate torque: approx. 1,500 Nm