Postaja za montažo navora

Yaskawa VARISPEED 616G5

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 31 h, 3D Coordinate CNC Measuring Device Profitech Innometrik Advanced in Gantry Design (Demo Unit at Special Price) Open Cable Key Features of Gantry Design: Gantry construction with a low center of gravity, wide bearing separation, and optimal stiffness-to-mass ratio. Granite guideways ensure consistent thermal, dimensional, torsional, and geometrical stability of the machine. 24 air bearings for smooth movement of all three axes. High dynamics for improved performance—the machine can reach high accelerations, comparable to medium and large CMMs. Kedpfsdyah Sox Af Tjdg Thermally stable materials and components minimize the impact of ambient temperature fluctuations on measuring results. Air filters and regulators included. Pneumatic counterbalance system for the Z-axis. Granite table with M10 threaded inserts. Passive vibration isolation pads. Technical Specifications Measuring range: X: 500 mm Y: 600 mm Z: 400 mm Max. workpiece weight: 250 kg Machine weight: 850 kg Overall dimensions: 1290 x 1160 x 2350 mm Accuracy according to DIN EN ISO 10360-2 / ISO 10360-4: Volumetric probing deviation: MPEP = 2.2 µm Volumetric length measuring deviation: MPEE = 2.2 + L / 350 (µm) Ambient Conditions: Standard room temperature: 18–22°C Operating temperature: 10–35°C Compressed air supply: Minimum air pressure: 6 bar Air consumption: 90 NI/min Available as a complete package with probe system, software, commissioning, and training. (Annual maintenance & calibration also available)

Leto izdelave: 2015, Stanje: pripravljen za uporabo (rabljen), A CNC dual-spindle lathe by Traub, fully overhauled in 2025, is available. Turning length: 450 mm, spindle bore: 65 mm, max. speed: 4,000 rpm, main spindle/sub spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/- 35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 12,938 h. Included: chip conveyor and LNS Quick Load bar feeder. Documentation available. On-site inspection possible. Kdodpfx Aev Scrbsf Teg

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 20 [mm] - Max. machinable length: 200 [mm] - Spindle speed: 10,000 [rpm] - Spindle drive power: 3.7 [kW] - Minimum C-axis resolution: 0.001 [degrees] SUB SPINDLE - Max. bar diameter: 20 [mm] - Spindle speed: 8,000 [rpm] - Spindle drive power: 1.5 [kW] - Minimum C-axis resolution: 0.001 [degrees] TOOL HOLDER 1 - Number of positions: 10 - Number of driven positions: 5 - Driven tool speed: 5,000 [rpm] FRONT TOOL POST - Number of positions: 4 SUB OPERATIONS - Number of positions: 3 ELECTRICAL SUPPLY - Supply voltage: 400 [V] WEIGHT AND DIMENSIONS - Footprint: 2,110 x 1,085 [mm] - Machine height: 1,832 [mm] - Machine weight: 2,200 [kg] MACHINE HOURS - Operating hours: 32,264 [h] ACCESSORIES - Controller: Meldas Kedouhazgjpfx Af Tjdg - Driven guide bushing - Parts catcher - Parts conveyor - Parts ejector - Chip conveyor - Coolant tank * with high-pressure pump - Bar feeder: FMB MINIMAG 20

Stanje: novo, Leto izdelave: 2018, NEW MACHINE at a special price Tactile Coordinate Measuring Machine by Innometrik Measuring range: 1200 x 3000 x 1000 mm Kdedpfx Asdyl H Nef Tog Maximum workpiece weight: 1000 kg Accuracy MPEE: 2.2 + L / 350 (in µm) Scale resolution: 0.1 / 0.5 µm - Air bearings on all axes Linear speed: 300 mm/s Volumetric speed: 520 mm/s Probe system: Renishaw TP200 incl. 3 modules (SF, HF, LF) and triple tool changer Software: OptiCheck 4.5 & Virtual DMIS (separate partitions). Optionally also Polyworks per customer request -incl. PC (Windows 7), alternatively Windows 10 -incl. 2 monitors -incl. mouse / keyboard Image: Sister machine

Stanje: novo, Saw blade diameter: 370 mm Cutting capacity at 90 degrees (round): 120 mm Cutting capacity at 90 degrees (square): 100 mm Cutting capacity at 90 degrees (rectangular): 180x100 mm Working height: 925 mm Saw blade speeds: 15 - 70 rpm Total power requirement: 1.8/2.2 kW Machine weight: approx. 0.71 t Space requirement: approx. 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-Performance Vertical Circular Saw, Hydropneumatic Fully Automatic (20192) · Mitre cutting left 60° / right 45° Kdodpfxsd Iin Hs Af Teg · Hydro-pneumatic control of the saw unit · Electro-pneumatic automatic material feed unit · Smooth-running, high-performance worm drive with large gear ratio, integrated into a robust cast housing for optimal cutting results · Vise with double clamping arm for low-burr cuts, additionally with quick lateral positioning for mitre adjustment · Precision prismatic guide for the gearbox head, laterally adjustable · Particularly stable base frame with integrated automatic coolant system · Large chip drawer · Chip removal brush in the saw blade guard MPS control system: · Storage of cut start/end positions · Display of current consumption, piece count, cutting time... · Adjustable water cooling · Cutting pressure regulator IMPORTANT: Price does NOT include saw blade! (Saw blade price €204)

Stanje: novo, Load capacity in kg: 1200 kg Fork length: 1150 mm Lifting height: 3000 mm Overall height: 2150 mm Kdjdpfjifw Utsx Af Tog Machine weight approx. 0.625 t Dimensions (L x W x H): 1.71 x 0.8 x 2.15 m The ESL122 is a 24V/80Ah lithium-ion powered electric stacker. It features a high-strength chassis and a rigid mast, ensuring excellent operational stability. This model offers comfortable maneuverability and efficient, effective vertical stacking, making it ideal for use in confined spaces.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Traub TNL 18-7B CNC Automatic Lathe Base Machine: 2441 x 1396 mm Weight: 3800 kg Spindle Height Above Floor: 3800 mm Connected Load: 24 kW Main Spindle Max. Bar Capacity: 18 mm Max. Speed: 12,000 rpm Corner Speed: 5,000 rpm Z-axis Stroke: 205 mm Rapid Traverse: 40 m/min Measuring System Resolution Z: 0.001 mm Feed Force: 3000 N Spindle Nose / Short Taper: Traub short taper interface Max. Clamping Force: 1400 daN Max. Clamping Pressure: 40 bar Min. Clamping Pressure: 7.5 bar Piston Area: 40 cm² Total Cylinder Stroke: 5 mm Draw Tube Thread: M25 x 1 Counter Spindle Workpiece Diameter: 21 mm Clamping Depth Workpiece: 180 mm Max. Speed: 12,000 rpm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Max. Clamping Pressure: 30 bar Min. Clamping Pressure: 10 bar Upper Tool Turret with B-axis Number of Stations: 8 Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -25/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Lower Tool Turret Number of Stations: 7 + counter spindle Shank Cross-section, Turning Tool: 16 x 16 mm Travel: X: 120 mm Y: -20/+40 mm Z: 250 mm Rapid Traverse: X: 20 m/min Y: 20 m/min Z: 40 m/min Tool Change Time: 0.5 sec Measuring System Resolution: X: 0.0005 mm Y: 0.0005 mm Z: 0.001 mm Driven Tools for Upper Tool Turret Kedpfxowg Take Af Tsdg Number of Driven Stations: Max. 8 Drive Power: 2 kW Max. Speed: 12,000 rpm Torque: 3.9 Nm Driven Tools for Lower Tool Turret Number of Driven Stations: 7 + counter spindle Drive Power: 3.4 kW Max. Speed: 12,000 rpm Torque: 7.3 Nm Driven Tools for Rear Unit Number of Stations: 7 Number of Drivable Stations: Max. 3 Station Pitch: 46 mm Drive Power: 2 kW Max. Speed: 7,500 rpm Torque: 4.7 Nm Drive Power: 2 kW Max. Speed: 4,000 rpm Torque: 11.8 Nm SCOPE OF SUPPLY Includes (not exhaustive): Traub CNC Lathe Tool holders, driven and non-driven High-pressure and belt filter system Oil mist separator Fire suppression system Chip conveyor Bar loader Operating documentation Exact scope of supply as per photo documentation No guarantee is given for the correctness, completeness or timeliness of the information provided.

Stanje: rabljeno, TECHNICAL DATA - Max. bar diameter: 12.7 [mm] - Main spindle stroke (fixed/driven guide bushing): 130/80 [mm] - Spindle power: 4 [kW] - Rotational speed: 12,000 [rpm] - Upper turret: 6 positions - Lower turret: 6 positions - Number of driven positions on turret: 6 - Max. diameter in sub-spindle: 12.7 [mm] - Sub-spindle rotational speed: 12,000 [rpm] - Dimensions: 2850 x 1100 x 1480 [mm] - Operating hours: 12,408 [h] - Main spindle hours: 9,400 [h] EQUIPMENT - CNC control TRAUB TX 8i - Bar feeder LNS Alpha ST 320 - C axis on main spindle and sub-spindle - Brake for main spindle and sub-spindle - Parts catcher with conveyor belt - Fire protection system - Coolant tank with pump and chiller unit - Chip conveyor Kjdsuhav Dspfx Af Tjdg - Various fixed and driven tool holders

Stanje: novo, Leto izdelave: 2025, premer žaginega lista: 360 mm, High-performance Everising Circular Saw Fully Automatic Machine (NEW) incl. magazine. Designed for the use of thin-kerf circular saw blades (Carbide / Cermet) Basic Data: • Application range: 15-100mm round (rectangular 15-80mm) • Drive: 11 kW • Blade dimensions: 360 x 2.6 x 2.25 mm • Saw blade speed: 40 – 160 rpm • Weight: 4 tons • Dimensions: 2900 x 7038mm (incl. magazine) Features: • Automatic loading magazine 6 meters (for 6 m round material) • Emulsion cooling option • Siemens control system • Electromagnetic braking system • Direct-driven saw spindle for extremely high cutting performance • Ball screw incl. servo motors for precise feed • Heavy-duty design • Minimum quantity lubrication • Inverter-controlled, stepless cutting speed • Fully enclosed, low-noise operation • Automatic cut-off and scrap sorting • etc. Other available models: P-50 ILA: cutting range 8-50mm Kdedpfx Asq Ul Izsf Tog P-75 ILA: cutting range 10-75mm P-100 ILA: cutting range 15-100mm P-150 ILA: cutting range 70-150mm P-160 ILA: cutting range 70-160mm P-180 ILA: cutting range 70-180mm P-230 ILA: cutting range 70-230mm

Stanje: dober (rabljeno), Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.680 mm, skupna širina: 2.350 mm, skupna višina: 1.350 mm, vrsta vhodnega toka: Klimatska naprava, skupna masa: 1.800 kg, Razpon rezanja okroglega jekla pri 45°: 300 mm, Obseg rezanja okroglega jekla pri 90°: 325 mm, dolžina tračnega lista: 4.400 mm, širina tračne žage: 34 mm, delovna višina: 750 mm, hitrost rezanja: 150 mm/min, vrsta nastavitve višine: hidravlični, Technical Specifications: Clamping Range for Bundle Clamping: Width: 0 – 300 mm Height: 5 – 300 mm Material Feed: Single: 0 – 600 mm Multiple: 0 – 9999 mm Minimum Remnant Length: Manual: approx. 70 mm Automatic: approx. 300 mm Cutting Speed: 15 to 150 m/min – AC drive Cutting Pressure: infinitely adjustable, hydraulic Descent Speed: 0 to 300 mm/min – stepless Kjdpfx Ajq Atyzjf Tjdg Saw Blade Dimensions: 4400 x 34 x 1.1 mm Saw Blade Tension: With torque wrench Machine Weight: approx. 1800 kg (net) Machine Dimensions (L x W x H): approx. 2680 x 2350 x 1350 mm Max. Support Weight: Material weight max. 250 kg/m Working Height: 750 mm With leveling elements approx. 800 mm (optional) Noise Emission: 74 dB(A) Measured at the operator’s workstation Including the two pictured roller conveyors.