Univerzalni dvižni nosilec

XLift X-lift 10

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Bodpfx Agst N Antetswl Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1990, Böcker LH 710 with electrohydraulic drive Bsdpfohh Swkjx Agtowl Year of manufacture: 1990 No. 3216/2 Rated load: 300 kg Own weight: 255 kg Lifting height: 7100 mm Overall height: 2200 mm

Stanje: kot nova (razstavni stroj), For sale Bwjdpoh Uqibsfx Agtol Demag wheel blocks ATTENTION! We have more than 15,000 Demag parts in stock For further information, please visit our website or see our other listings.

Stanje: rabljeno, Decoction process Bsdevcqufspfx Agtjwl Machine (additional details): Mash vessels with copper domes and hop dosing device, whirlpool, and wort cooling unit Brew length: 150 hl per brew Operation / Control: ProLeit / Siemens S7 Material: Brew vessel copper-clad Features: Mash/wort kettle, lauter tun, hop dosing tank, kettle vapor condenser system, whirlpool, wort cooler, various pumps and fittings

Stanje: novo, Bandsaw Bernardo HBS 460 N - 400 V Technical Specifications Cutting width: 465 mm Cutting height: 280 mm Saw band dimension: 3607 x 25 x 0.6 mm – 3 TPI Saw band widths: 9.5 - 25.4 mm Cutting speed: 420 / 840 m/min Table dimensions: 480 x 630 mm Table height: 970 mm Saw table tilt: -5° to 45° Bwsdpfx Asd N S Ursgtsl Extraction port diameter: 2 x 100 mm Motor output power S1 100%: 2.2 kW (3.0 HP) Motor input power S6 40%: 3.0 kW (4.0 HP) Voltage: 400 V Machine dimensions (W x D x H): 1050 x 800 x 1950 mm Weight approx.: 162 kg Scope of delivery • Saw blade • Parallel fence with magnifier • Mitre fence • Drive wheels made of aluminium • Ball-bearing saw band guide • Motor including brake • Push stick • Operating tools

Stanje: dober (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, skupna masa: 2.200 kg, KUKA KRC4 Linear Axis 1500/3T Bwodpjvzxg Tefx Agtjl Item number: 8143983 Serial number: 143983 The KUKA KRC4 Linear Axis is a high-precision, robust motion unit, ideally suited for industrial applications. It ensures exact control over motion sequences and plays a central role in automation processes and robotic systems within manufacturing. Its durable construction guarantees consistently reliable performance, even under the most demanding operating conditions.

Leto izdelave: 1998, stanje: dober (rabljeno), Manufacturer: UNION Model: Ti 1800 Year of manufacture: 1998 Specifications Metric US Standard Table length: 2000 mm Table width: 1800 mm Table load capacity: 16000 kg V-axis feed: 1250 mm B-axis rotation: 360.000° B-axis rotational speed: 1.35 rpm V-axis traverse speed: 4000 mm/min. Dimensions (approximate): Length: 3400 mm Width: 2000 mm Height: 920 mm Bodskwcdbspfx Agtjwl Weight: 6500 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, sourced from the manufacturer. The information is supplied in good faith, but accuracy cannot be guaranteed. Accordingly, they do not constitute representations or terms of contract. We recommend verifying all critical details.

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Weishaupt dual-fuel burners 2x RGL50/2-A, Output 5400 kW 1st year of manufacture: 1998 2nd year of manufacture: 1998 We speak Russian! Viewing by appointment only! Preferred sale to dealers, commercial traders, or for export. All information supplied without liability, subject to errors and prior sale. The seller assumes no responsibility for typographical or data transmission errors. We are also happy to purchase your used boiler or burner! Bwodpfx Agei Atm Nstel Of course, we can also handle all formalities for you. Loading possible.

Stanje: novo, Leto izdelave: 2026, The ATC plotter series has been designed for professional applications in large industrial plants and factories, used for the production of complex, large-format components. Owing to its special construction, the machine is suited for manufacturing foundry models and yachts, significantly reducing processing times. To meet the demands of heavy-duty machining, ATC machines are equipped with a reinforced frame and more powerful AC servo drives on each axis. The presence of five axes supports the machining of even the most demanding components. Standard equipment for this series includes automatic tool change, a six-position linear tool magazine, and a tool height sensor. These solutions significantly accelerate processing when multiple milling cutters are required. Materials processed: - wood - wood-based materials (chipboard, MDF, OSB, etc.) - plastics - composites - PVC - non-ferrous metals (aluminium, brass, copper, etc.) Bwsdpfjiq U Tqex Agtjl CONSTRUCTION: The machine’s frame is made of steel and cast iron, ensuring high rigidity and resistance to heavy loads associated with machining processes. WORKING AREA: The working area of our machine is 3000 x 6000 [mm]. Z AXIS RANGE AND GANTRY CLEARANCE: Parameters tailored to the client’s individual requirements. DRIVES: The machines are powered by SERVO motors, providing appropriate acceleration and speed in all directions. The X and Y axes feature classic, proven helical racks for durability and precision, while the Z axis is driven by a high-grade ball screw. All axes move along linear guide rails. SPINDLE: A powerful, brushless high-end spindle drives the cutting tool. The spindle speed ranges from 6,000 to 24,000 rpm. It is powered by a frequency inverter of higher power than the spindle itself, which prevents speed drops under heavy load. TOOL MAGAZINE: As standard, the machine is fitted with a linear tool magazine with 6 HSK holders. Additional tool magazine positions are available on request. SOFTWARE: The machine comes with dedicated CAD/CAM software, enabling fast and easy design of components, which the software then converts into G-code. Importing ready-made files from other programs is also possible. CONTROL SYSTEM: The machine is operated via a controller equipped with its own processor and RAM, ensuring stable and reliable operation.

Stanje: dober (rabljeno), Leto izdelave: 1976, Swing diameter over bed Ø: 1600 mm Bwsdpfx Agewvir Iotsl Swing diameter over cross slide: 1250 mm Swing diameter in gap Ø: 2100 mm Bed width: 1400 mm Power: 35 kW Spindle speed: 180 rpm