Stroj za notranje in čelno brušenje

WMW SI 6/1 x315

Stanje: zelo dobro (rabljeno), Workpiece diameter - max. 600 mm Thread length: 7000 mm Module - max. 8 / 12 Module - min. 1 Swivel range: ° Cutter diameter: 63 - 140 mm Spindle speeds - stepless: 45 - 450 rpm Machine weight: approx. 12.5 t Space requirement: approx. 9.0 x 2.0 x 2.2 m Condition: Well maintained, checked and partially overhauled by specialist company. The existing milling head has been replaced by an overhauled universal milling head. Equipment: Differential for angled machining Automatic indexing device (interchangeable index plates!) for splined and multi-start components; also extensive set of bushings, support rollers and around 70 change gears. Kwodpfx Ajwgizdoacsu Conversion of milling head speed control to frequency inverter with corresponding high-performance motor is a great advantage and saves much setup time. Accessories: Around 70 change gears, 3 bushing setting tools of various sizes, about 20 bushings, 2 roller supports, 2 centers for direct mounting on the clamping spindle, 350 mm chuck, 2 spare index plates.

Stanje: dober (rabljeno), Studer S30-12 Cylindrical Grinding Machine TECHNICAL DATA Main Dimensions Centre Height: 125 mm Centre Distance: 400 / 700 / 1025 mm Maximum Longitudinal Slide Travel: 400 / 700 / 1000 mm Longitudinal Slide Table Speed: 50 – 5000 mm/min Reversal Delay: 0-6 s Smallest Automatic Travel: 1.5 mm Maximum Travel: 400 / 700 / 1020 mm Maximum Table Swivel: 12 / 30 / 78° Cross Slide Swivel Range: ±45° Rapid Adjustment: 40 mm Handwheel Feed Travel: 20 mm Maximum Infeed Depth: 1.7 mm Grinding Spindle Head Grinding Wheel Diameter x Width x Bore: 450 x 80 x 203 mm Spindle Speed: 1340 / 1500 / 1625 / 1800 / 2000 / 2200 rpm Coarse Adjustment: 210 mm Workpiece Spindle Head Swivel Range: 0 – 90° Speed Range: 30 – 675 rpm Mounting Taper: Morse 5 Collets: W25 Tailstock Mounting Taper: Morse 3 Quill Travel: 30 mm Total Power Requirement: 5 / 8.25 kW Kodpfx Ajvca Izjacowu No guarantee is given for the correctness, completeness, or topicality of the information provided.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Grinding length: 973 mm Centre height: 250 mm Workpiece table max. swivelling range: +6° / -9° Centres: Morse taper 5 (MT5) Grinding headstock max. travel: 100 mm Kedpfxewhp Dne Aacowu Grinding headstock max. swivel range: +45° / -30° Max. grinding wheel diameter: 500 mm Speed range: 32 - 600 rpm Max. workpiece weight between centres: 400 kg Internal grinding attachment, max. grindable bore: 160 mm Machine weight: approx. 5,000 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1970, Model: AR 1000 - Leto izdelave: 1970 – 1991, geometrijsko obnovljen - Stanje: dobro do zelo dobro Kodpfx Aasxfvyzocjwu - Premer brušenja: maks. 350 mm - Dolžina brušenja: 1000 mm - Dolžina potopnega brušenja: 100 mm - Višina konic: 180 mm - Konus konic: 60 MK4 - Dimenzija brusnega kolesa: maks. 500 Ø x 300 Ø x 80 mm - Brušilna glava vrtljiva: +/- 45° - Dimenzije: 3,2 x 1,7 x 1,6 m (D x Š x V) - Potrebna površina: 4,13 x 2,02 x 1,6 m (D x Š x V) - Teža: cca 4.300 kg - Obratovalna napetost: 380 V - Moč: 7,5 kW (skupaj 11,6 kW)

Stanje: dober (rabljeno), Premer brušenja: 450 mm Dolžina brušenja: 600 mm Višina konic: 140 mm Kjdpfsxcblqsx Aacowu Premer obdelovanca: 280 mm Število vrt./min vretena: 63 - 400 Hitrost brusnega kolesa: 20–35 m/s Potrebni prostor cca: 2,4 x 1,9 x 2,1 m Ta okrogla brusilka je v dobrem stanju, takoj na voljo in jo je možno pod napetostjo preizkusiti pri prodajalcu. OPIS: - Naprava za notranje brušenje - Hladilna enota - Samodejni pomiki Razdalja med konicama: - 430 mm vključno s collet vpenjalom in nastavljivo glavo - 600 mm do konusnega držala brez glave

Stanje: zelo dobro (rabljeno), Leto izdelave: 1991, Swing diameter: 400 mm O F F E R We can offer you the following, subject to prior sale and errors, ex stock, without obligation: WMW - GLAUCHAU Universal Internal Cylindrical Grinding Machine with Face Grinding Device Type: SI 6/1 AS-N x 315 Year of manufacture: 1991 _____ Internal grinding diameter range: 40 - 400 mm Maximum grinding depth: 315 mm Maximum external cylindrical grinding diameter: 400 mm Maximum workpiece weight: 630 kg Workpiece swing diameter with / without chuck guard: 500 / 600 mm Centre height above table: 360 mm 16-step workpiece spindle speeds: 40 – 400 rpm Workpiece spindle bore, approx.: 53 mm Workpiece headstock swiveling max.: 30° Kodpfx Aoxyllvsacewu Workpiece headstock cross adjustment, max.: 400 mm Grinding spindle stock r-feed: 70 mm Grinding spindle stock cross adjustment, approx.: 100 mm Grinding head infeed, automatic intervals: 0.001 – 0.025 mm/stroke Grinding head infeed, continuous: 0.1 – 1 mm/min Table stroke, max.: 630 mm Table speed infinitely variable: 0.1 – 8 m/min (10 m/min) Distance between workpiece headstock and grinding spindle, max.: 1,250 mm Grinding spindle stock adjustment on table: 520 mm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 17 kW - 380 V - 50 Hz Weight, approx.: 6,000 kg Accessories / Special equipment: • Universal internal grinding spindle stock with program-controlled cycles for grinding cylindrical and conical bores with one or more diameters, external cylindrical grinding and narrow face grinding • Face grinding device, hydraulically swiveling, with automatic cycles for grinding single and multiple face surfaces as well as stepped faces simultaneously • Electronic program control with large operating panel and ampere meter for both grinding spindles • Belt-driven grinding spindle drive with built-in grinding spindle and 5 separate, interchangeable grinding spindles with various belt pulleys of different diameters • Dressing unit for both grinding spindles, large chuck guard at the workpiece headstock • HEIDENHAIN digital display for cross adjustment of the workpiece headstock • Extensive accessories including 4-jaw faceplate approx. 520 mm, 3-jaw chuck approx. 380 mm, 3-jaw chuck approx. 130 mm, belt pulleys, spindle sleeves, grinding wheel mounts, foot switch • Separate hydraulic unit, mounted control cabinet, coolant system with magnetic separator Condition: Good to very good! Suitable for all grinding tasks! Please click here for a video of the machine: Delivery: Ex stock, available immediately, FCA Metzingen Payment: Net - upon receipt of invoice

Stanje: rabljeno, Premer brušenja 250 mm Dolžina brušenja 500 mm Dimenzije brusnega koluta 400 x 50 mm Po naši oceni je stroj v dobrem rabljenem stanju in si ga je po dogovoru mogoče ogledati pod napetostjo. Tehnične značilnosti in dodatna oprema: - konjiček - razna dodatna oprema Kjdpfoxzuylox Aacjwu Dodatna oprema, prikazana orodja in vpenjalna sredstva so vključena v obseg dobave samo, če je to navedeno v dodatnih informacijah. Pridržujemo si pravico do sprememb in napak v tehničnih podatkih ter predhodne prodaje!

Stanje: nepreverjeno (rabljeno), Funkcionalnost: nepreverjeno, Različni brusilni stroji za navoje se prodajajo v kompletu. Proizvajalec: REISHAUER ali na primer LINDNER Nekateri stroji so odklopljeni z elektrike, torej jih ni mogoče prikazati pod napetostjo. Stroji se prodajajo v stanju, v katerem se nahajajo. Kedpfoyc N Dpex Aacjwu Demontaža in nakladanje sta na stroške kupca. V razdelku "Dokumenti" (PDF datoteka) najdete cene za posamezne stroje. Iz skladišča se prodajajo 4 brusilni stroji za navoje LINDNER: Ma_109A Brusilni stroj za navoje LINDNER GUS-A Ma_109B Brusilni stroj za navoje LINDNER GUS-B Ma-110 Brusilni stroj za navoje LINDNER MA-111 Brusilni stroj za navoje LINDNER

Stanje: rabljeno, Leto izdelave: 1988, Funkcionalnost: popolnoma funkcionalen, višina središča: 300 mm, dolžina brušenja: 600 mm, For sale is a very well-maintained cylindrical grinding machine from Jones & Shipman. The machine is still highly precise. A demonstration and testing of the machine are very welcome. Kwodpfjwpb Hqex Aacju

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Maximum workpiece length: 500 mm Minimum workpiece length approx.: 5 mm Maximum workpiece length for plunge grinding: 50 mm Maximum grinding diameter without setting pieces: 100 mm Maximum diameter: 240 mm Kwedewhp D Uspfx Aacsu Workpiece Swiveling capacity: 90° Grinding spindle slide Min./max. swivel range: 30° Min./max. cross movement incl. 300 mm rapid traverse: 100 mm Wheel diameter per revolution 1st range: 320 - 400 mm 2nd range: 260 - 320 mm Max. workpiece weight between centers: 60 kg Max. workpiece weight in chuck: 20 kg Max. workpiece weight on faceplate: 20 kg 8 workpiece spindle speeds: 45 - 500 rpm Min./max. swivel angle: 12° Min./max. longitudinal travel: 2 - 500 mm Table movement stepless: 0.5 - 5 m/min Handwheel infeed: 2 and 20 per revolution