Razdelilna glava

WMW mit Gegenlager

Leto izdelave: 1984, Stanje: rabljeno, max. Schleifscheibendurchmesser: 40 mm min. Schleifscheibendurchmesser: 5 mm Gewicht: 0,9 t Kwjdecq Rv Uepfx Abbst 2 Schleifscheiben mit Flansch 8 Spannzangen 1 Kühlmittelbehälter Mechanischer Vorschub mit Festanschlag Die Gelenkwelle für den Werkstückantrieb ist ausgeschlagen.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Control system: ELB PLC Grinding area: Length X 1000 mm Width Z 750 mm Height Y 400 mm Magnetic chuck 1000 x 700 mm Table load capacity (without magnetic plate): 1100 kg Longitudinal axis X: Table speed 2–26 m/min Maximum longitudinal stroke 1100 mm Vertical axis Y: Vertical stroke 400 mm Maximum feed speed 1200 mm/min Minimum vertical infeed 0.001 mm Cross axis Z: Maximum cross stroke 620 mm Maximum feed speed 2000 mm/min Minimum cross infeed 0.001 mm Grinding spindle: Taper 75 mm Drive 22 kW Speed range 1450 rpm Kwjdpevwl Ipsfx Abbot Grinding wheel dimensions: 450 x 150 x 203.2 mm Machine footprint (without control panel) LxWxH: 3550 x 2750 x 3230 mm Total machine weight: 7300 kg

Stanje: rabljeno, Grinding length 1000 mm Grinding width 300 mm Workpiece height 230 mm Table clamping surface 1000 x 240 mm X-axis travel 1000 mm Y-axis travel 270 mm Kjdpfxju Dn Txj Abbewt Z-axis travel 350 mm Grinding wheel diameter 240 mm Grinding spindle speed 2180 rpm Table speed - stepless - 3 - 30 m/min Total power requirement 4.5 kW Machine weight approx. 2.8 t Machine dimensions (L x W x H) 2.36 x 1.37 x 2.0 m Accessories: Magnetic chuck 680 x 200 mm, grinding wheel with flange (ø 240 x 25 mm), Wet grinding attachment

Leto izdelave: 1984, Stanje: rabljeno, številka stroja/vozila: 57051/4, Manufacturer: Rhode & Doerrenberg (May) Model: SS 40 U Serial No.: 57051/4 Year of manufacture: 1984 Weight: 950 kg General / Technical Data: Used drill grinding machine of German manufacture for 2-, 3-, and 4-fluted tools, in good condition. Diameter range: from 5 mm to 40 mm Tool length: 500 mm Point angle: from 80° to 160° Relief angle: from 1° 30' to 10° Grinding wheel: 210 x 127 x 50 mm (cup wheel) Tool types: 2-, 3-, and 4-fluted drills and countersinks Grinding direction: For tools with left & right hand cutting Machine dimensions (L x W x H): 1350 mm x 1100 mm x 1400 mm Power supply / Control voltage: 380 Volt 50 Hz / 220 V Motor output / Total power: 2.2 kW / 2.55 kW Accessories / Special features: Kedjc Nv S Ajpfx Abbswt • 2 grinding wheel mounts with grinding wheels • 8 collets for drill holding, make: Forkardt • 6 Morse taper sleeves & drill extensions • Coolant system • Machine documentation & electrical schematic Remarks: The machine is stored at our warehouse, connected to power, and can be demonstrated by appointment.

Stanje: rabljeno, FLACHSCHLEIFMASCHINE MIT MAGNETSPANNPLATTE Tischgröße (LxB): 1100 x 400 mm Kwsdpfxe Dv Nuo Abbst

Leto izdelave: 1979, Stanje: dober (rabljeno), Back Relief Grinding Machine May WH50 Specifications: Manufacturer: Rhode & Dörrender (May) Model: WH 50 Year of manufacture: 1979 Min. grinding diameter: 3 mm Max. grinding diameter: 50 mm Kwodpfx Abehadxcsbot Weight: 1,350 kg Footprint: 1520 x 1600 mm Application range: For grinding and back relief of 2 to 4-fluted round tools Suitable for grinding profile/form tools Including Diaform dressing device

Leto izdelave: 1963, Stanje: rabljeno, drill bit grinding machine, manufacturer Rode + Dörenberg, model MAY type SS 75 A Kwedpfx Abonccx Hobst

Leto izdelave: 1973, Stanje: dober (rabljeno), 1 used keyway shaft grinding machine, manufacturer Fritz Werner Type FKR 16 Year 1973 Serial no. 5275/8012 Technical specifications: Ksdpfon Atchjx Abbowt Center height: 185 mm Max. grinding length: 1600 mm Passage diameter: 55 mm Divisions: 4–32 Dimensions (L x W x H): 5900 x 2300 x 2000 mm Weight: 7 t

Stanje: dober (rabljeno), Leto izdelave: 1991, two units available Kjdpfxem Ndm Ss Abbjwt Currently still in operation can be tested Table 1000x400 Increased accuracy, automatic feed

Stanje: rabljeno, Flachschleifmaschine STANKOIMPORT 700 x 250 mm Kjdjikza Tjpfx Abbswt