Razdelilna glava

WMW DU 250 AS

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 470 mm, stružna dolžina: 3.000 mm, premer struženja: 720 mm, izvrtina vretena: 104 mm, CNC Lathe Geminis 4 Plus 720 x 3000 mm Description: Manufacturer: Geminis Model: CNC 4 Plus Nkjdpfx Aswuligodvsw Control unit: Fagor 8055 FL-BT CNC Specifications: - Distance between centers: 3,000 mm - Swing over bed: 720 mm - Swing over cross slide: 470 mm - Spindle bore diameter: 104 mm - Tailstock quill diameter: 100 mm (Morse taper 6) - Bed width: 550 mm Speeds: - 2 speed ranges: 0–1,600 rpm Rapid Feed Rates: - X-axis: 8 m/min - Z-axis: 8 m/min Motor: - Power: 22 kW Weight: 8,000 kg Equipment: - Fagor 8055 FL-BT CNC - SCHUNK Rota-S Plus 3-jaw self-centering chuck Ø 315 mm - Additional 3-jaw chuck - Fixed steady rest - Chip conveyor

Stanje: rabljeno, številka stroja/vozila: 7979, Table diameter: 400 mm Nsdpeb Ez R Usfx Advskw Table with 8 T-slots: 12 mm Overall height: 175 mm Required space: 600 x 450 x 175 mm Weight: approx. 100 kg

Stanje: rabljeno, Wheel diameter – max. 180 mm Wheel width 45 mm Module – max. 4 Module – min. 0.5 Stroke length max. 0 – 52 mm Spindle mount internal MK 4 Table diameter 160 mm Table bore diameter 75 mm Strokes per minute 355 – 630 Nkedpfstycg Sjx Advjw Feed range 0.008 – 0.4 mm/stroke Space requirements approx. 2.30 x 1.50 x 2.36 m Drive power 6 kW Machine weight approx. 2,500 kg Equipped with rack shaping device Change gear set Year of manufacture: approx. 1981

Stanje: novo, Grinding range: 2 - 20 mm Point angle min./max.: 90 - 135 degrees Connected load: 230 V Machine weight: approx. 8.6 kg Space requirement: approx. 0.35 x 0.2 x 0.2 m Packaging dimensions: 340 x 270 x 410 mm Nodpfx Aeupxkwodvekw Weight: 8.6 kg

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Nksdpfxjt Hwucj Advew Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: rabljeno, Leto izdelave: 2008, številka stroja/vozila: MBxx-25, DEMAG KBK 2 – Overhead Crane System, Crane Runway, Indoor Crane We assemble your crane runway to the desired dimensions – please inquire! Load capacity/hoisting capacity: 80, 125, 250, 500 up to 1000 kg Technical data of the system: Profile: Demag KBK 1, 2L, and 2 rails Also available as a single-girder runway with curved sections, turntables, and switches! Nkedowq A Avspfx Advow Variable installation height The system can be delivered complete, including accessories such as: KBK rails, rail connectors, trolleys, end plates, energy chains, brackets/hangers, etc. All sizes of chain hoists available as options Various systems available Very good used condition Rails available in yellow or red! Shipping via freight forwarding possible, collection preferred Demag KBK1, KBK2, and KBK3 rails kept in stock!

Stanje: novo, Leto izdelave: 2025, Ring Bending Machine, Manufacturer: Zopf, Model: ZB 70/2 M - Two driven rollers - Dual adjustment of the upper roller - Operation possible in both horizontal and vertical positions - Shafts supported by tapered roller bearings - Use of interchangeable slide rails on the guide carriage - Roller diameters: 152/162 mm - Shaft diameter: 40 mm - Shaft speed: 8.5 rpm - Drive motor: 1.1 kW - Bending capacity: up to 60x10 mm (vertical orientation) - Round tube up to 80x2 mm - Angle iron up to 50x50x5 mm Njdpfx Ast Hwfnjdvokw - Solid material up to 35 mm - Weight: 400 kg

Stanje: novo, Leto izdelave: 2025, TECHNICAL DATA Centre height: 330 mm Centre distance: Spindle bore: 103 mm Swing over bed: 660 mm Swing in gap: 840 mm Swing over cross slide: 420 mm Spindle speed range: 36 - 1600 rpm (12 steps) Spindle nose: ISO 702/II No. 8 Longitudinal feed range: 0.063 - 2.52 mm/rev (65 steps) Cross feed range: 0.027 - 1.07 mm/rev (65 steps) Metric threads: 1 - 14 mm (22 steps) Inch threads: 28 - 2 TPI (25 steps) Module threads: 0.5 - 7 mm (18 steps) Diametral threads: 56 - 4 DP (24 steps) Quill diameter: 75 mm Quill travel: 150 mm Quill taper: Morse taper 5 Motor power: 7.5 kW, optionally 11 kW Nodpfx Adedzzw Ujvjkw Weight: 3,050.00 kg Dimensions: 3135 x 1050 x 1450 mm

Stanje: rabljeno, Leto izdelave: 1979, x-axis travel 1800 mm y-axis travel 1200 mm z-axis travel 900 mm Total power requirement 50 kW Machine weight approx. 15 t Space requirement approx. [ ] m BOHNER & KÖHLE Universal Milling Machine for toolmaking with HEIDENHAIN CNC control Model: WF 3 / 12 TNC 426 Year of manufacture: 1979 / modernised in 1999 Serial No.: 178 Table size: 1,600 x 1,200 mm Table travels: Longitudinal (X): 1,800 mm Cross (Y): 1,200 mm Rotary (manual): 360° Max. table load: approx. 4,000 kg Vertical slide travel (Z): 900 mm Vertical milling head travel (W): 300 mm Milling head swivelling: 2 x 90° Distance from spindle nose to table: 1,000 mm Spindle overhang: 1,230 mm Max. workpiece diameter for rotary milling: 2,100 mm Spindle taper: SK 50 Infinitely variable spindle speeds: 0 – 3,200 rpm Milling head feed per revolution: 0.04 - 0.4 mm/min Table feeds longitudinal & cross (infinitely variable): 100 – 4,000 mm/min Creep feed: 2 - 8 mm/min Rapid traverse: up to 10,000 mm/min Spindle drive: 22 kW; total drive approx. 50 kW - 380 V - 50 Hz Nodpfjt Hw Ensx Advokw Weight: approx. 15 t Accessories / Special Features: • HEIDENHAIN CNC path control type TNC 426 CB for 4 axes (?). Originally supplied as a mechanical machine and retrofitted in 1999 with above-mentioned control. Operation by swing control panel with monitor. • Hydromechanical clamping for traverse axes, hydraulic oil cooler. • Approx. 20 SK 50 tool holders, angular milling head, electric tool clamp, • Lateral supports for the worktable, separate control cabinet, • Rotary table can be manually turned and positioned. • RS 232 or RJ 45 interface for direct programming. Condition: good – ready for demonstration, robust and very user-friendly machine Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to your order. Further milling machines and machining centers of all types and sizes available from stock at any time!

Stanje: novo, 3-Roller Plate Bending Machine Ostas ORM 1270 x 140 Technical Specifications: Special features included in the price: - Motorized adjustment of the lower rolls - Hardened rollers - Motorized adjustment of the rear roll - Digital readout Sheet width: 1270 mm Sheet thickness max.: 5.0 mm Sheet thickness (pre-bending): 4.0 mm Roll length: 1270 mm Roll diameter: 140 mm Weight: 1400 kg Dimensions (L x W x H): 2500 x 800 x 1100 mm Motor power: 2.2 kW Equipment: - Upper and lower roller electrically driven - Upper roller swing-out Nkodpfx Aofpmz Hjdvew - Cone bending device - Asymmetric roller arrangement - Self-braking main motor - Separate control and operating panel - Safety cable - CE mark