Natančna vpenjalna glava s tremi čeljusti

WMW Niles Durchmesser 200 mm

Stanje: dober (rabljeno), Three-jaw chuck, three-jaw lathe chuck - Handover: in as-is condition as inspected - Short taper: has been shortened - Chuck size: Ø 200 mm Nsdpfx Aevbbmcjg Ejdd - Through-hole: Ø 54 mm - Spindle mount: taper Ø 104.5 mm - As shown in the photos, without additional accessories - Weight: 14.4 kg

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2007, obratovalne ure: 4.717 h, nosilnost: 2.000 kg, dvižna višina: 4.700 mm, težišče tovora: 500 mm, vrsta goriva: plin, tip droga: triplex, moč: 38 kW (51,67 KM), proizvajalec motorjev: Toyota, vrsta prenosa: hidrostat, Certificirano po DGUV do: 12/2024, dolžina vilic: 1.200 mm, lastna masa: 3.610 kg, Oprema: CE označba, bočni pomik, kabina, osvetlitev, popolna servisna zgodovina, spojka prikolice, vilice za palete, Toyota Tonero chariot élévateur GPL 2t avec système de pesée N° : 10051 Nodpeumk Tlefx Ag Eodd Année de fabrication : 2007 Heures de service : 4 717 h Contrôle UVV + entretien 12/23 à 4 694 h par Toyota Poids : 3 610 kg Longueur : 3 395 mm Largeur : 1 155 mm Hauteur : 2 085 mm Capacité de charge : 2 000 kg Centre de gravité : 500 mm Hauteur de levage : 4 700 mm Longueur des fourches : 1 200 mm (fourches neuves) Mât : Triplex avec levée libre Tablier porte-fourches : Déplacement latéral Moteur : Toyota 4Y ECS Puissance moteur : 38 kW Pneus avant : 21x8-9/6.00 Pneus arrière : 18x7-8/4.33 Équipements : - Système de pesée (affichage digital) d’origine - Tableau de bord multifonction - Déplacement latéral - Eclairage routier / phares de travail - Toyota SAS (Système de Stabilité Active) - Colonne de direction réglable - Siège Grammer MSG65 - Demi-cabine avec protection météo relevable à droite - Pare-brise avant et arrière avec essuie-glaces - Documentation La machine peut être présentée sur place. Toutes les informations sont sans garantie. Sous réserve d’erreurs et de vente préalable.

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck Njdpjd Ew Txofx Ag Esdd - Chuck size: Ø 200 mm - Weight: 18 kg

Stanje: rabljeno, Three-jaw chuck, 3-jaw chuck -Type: DHB 200x3x5 TGL 30 2332 Ndodpfx Asdtap Rog Ejd -Chuck size: Ø 200 mm -Bore: Ø 54 mm -Max.: 3000 rpm -Short taper mount: Ø 105 mm -Weight: 24 kg

Stanje: rabljeno, Leto izdelave: 2004, Technical Data: Main Spindle: Maximum turning diameter: 33 mm Maximum speed: 8,000 rpm Drive power: 5.5 kW Drive power at 60% duty cycle: 7.5 kW Slide 1: Z1 travel: 320 mm X1 travel: 50 mm Nedpfxetzyx Tj Ag Esdd Y1 travel: 255 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 25 mm Slide 1 Tool Mount: Tool positions Fixed, with tool shank 16 x 16 mm: 5 units Slide 2: X2 travel: 165 mm Z2 travel: 200 mm Rapid traverse speed: 30 m/min Ballscrew diameter: 30 mm Slide 2 Tool Mount: Number of turret stations with integrated spindle: 8 units Number of axial live tools (integrated): 8 units Coolant tank, approx.: 400 l Coolant pump, max. capacity: 80 l/min Dimensions (LxWxH), approx.: 2460 x 1510 x 1750 mm Equipment: - Fanuc iT CNC control - Workpiece unloading system - IEMCA bar feeder - 5-position tool holder plate for slide 1 - Electrical interface and software for bar feeder - Collet chuck for main and sub-spindle - 2 double drill holders for rear machining support with cylinder - Sub-spindle parts ejector

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck - Model: DH200x3-III - Standard: TGL 30-2332 - Chuck size: Ø 200 mm - Recess: Ø 155 mm Ndedpob A Slhofx Ag Eod - Bolt circle: Ø 174 mm - Through hole: Ø 57 mm - Weight: 12 kg

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck - Chuck size: Ø 200 mm - Thread mount - Through hole: Ø 53 mm Njdpfx Ajd Im S Hjg Ejdd - Weight: 19.7 kg

Leto izdelave: 1995, Stanje: rabljeno, številka stroja/vozila: 18891, Tractive force: 10 t. Lift: 1000 mm 3 clearing stations Ndodobrcmkopfx Ag Ejd With chip conveyor + platform for above-floor installation and safety door.

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck - Chuck size: Ø 200 mm Nodpod Inxgofx Ag Ejdd - Through-bore: Ø 54 mm - Short taper: 5 - Bolt circle: 105 mm - Weight: 16.2 kg

Stanje: rabljeno, Three-jaw chuck, three-jaw lathe chuck, 3-jaw chuck - Chuck size: Ø 200 mm - Short taper mount for: bayonet disc fastening - Taper size: 6 - Taper diameter: Ø 106 mm - Pitch circle diameter: Ø 133.4 mm - Bore: Ø 54 mm Ndedpfx Agod E R Sce Eod - Weight: 15 kg

Leto izdelave: 1990, Stanje: rabljeno, številka stroja/vozila: 90030003, Table size: 500 x 1200 mm Travel X-axis: 1000 mm Travel Y-axis: 550 mm Travel Z-axis: 600 mm Spindle taper: ISO 40 Spindle speeds: 60 – 2700 rpm Spindle drive power: 10 kW Electrical connection: 380 V, 20 kVA Ndodpfj Npwfex Ag Esd Required space: 3200 x 2800 x 2650 mm Weight: 7.3 t