Dodatki za varilno mizo

WMT Spannbolzen 28 / 25

Stanje: novo, Quantity: 10 pieces Clamping range: 15 - 50 mm Hole diameter: 28 mm Weight: 10 kg Dimensions (L x W x H): 0.3 x 0.3 x 0.2 m 10 quick-release clamping bolts suitable for 28 mm hole system for 25 mm table thickness Csdpfxjvki E Es Aplerb

Stanje: rabljeno, Tehnične podrobnosti: x-hod: 700 mm y-hod: 450 mm z-hod: 450 mm Vretena konus ISO: 40 (SK 40) Pritrdilna površina mize: 760 x 420 mm Podolžni pomik mize: 10 - 500 mm/min (hitri hod: 1,4 m/min) Vertikalni pomik mize: 5 - 250 mm/min (hitri hod: 1,4 m/min) Vretenaste hitrosti - brezstopenjsko: 32 - 1600 / 18 stopenj vrt./min Vretenasta glava nagibna levo/desno: 10° levo/desno Vertikalni hod pinole: 125 mm Pomik brezstopenjsko: 10 - 500 / 8 stopenj mm/min Hitri hod: 1,4 m/min Skupna priključna moč: 6,5 kW Teža stroja cca: 3,0 t Dimenzije stroja DxŠxV: 2,3 x 2,0 x 1,85 m Dodatne značilnosti: Domet vretenaste glave min./max.: 2094 / 2544 mm Oprema: - Hladilna črpalka z dovodom Crjdpfxevc Avhe Aplsb - Linearni merilni sistem – Heidenhain ND750 Dodatna oprema: - Strojski primež

Stanje: novo, Quantity: 100 positions Hole diameter: 28 mm Condition: new Weight: 280 kg Dimensions (L x W x H): 1.2 x 0.5 x 1.3 m XXL Starter Kit, consisting of: - 15x standard clamping pliers - 5x multi clamping pliers - 10x side clamps with eccentric - 15x loose cam H30 - 10x loose cam H100 - 2x tube insert cams, series - 10x quick release pins - 10x stop block 15 mm - 4x right angle XL - 6x right angle - 6x adjustable angle - 1x box - 1x holder insert Crsdpfx Apou Aw Ngsleb - 1x Allen key - tool trolley

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 30 W, vrsta hlajenja: zrak, skupna širina: 60 mm, skupna višina: 1.660 mm, skupna dolžina: 80 mm, skupna masa: 80 kg, The universally applicable LAS 28 laser marking system from Systemtechnik Hölzer GmbH is suitable for a wide range of marking applications. With the integrated fiber laser, you can mark almost any material, such as steel, hard metal, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50 watt fiber laser. For permanent marking, laser usage is essential in many industries. The powerful laser software enables you to easily create texts, numbers, 2D codes, QR codes, and logos with just a few clicks—no extensive programming knowledge needed. Serial and article numbers are automatically incremented by the software after initial setup. Additionally, the software can read data (such as part numbers, project names, etc.) from existing tables and transfer them automatically to predefined fields. The use of a hand scanner is also supported. Standard equipment includes a laptop with a mounting bracket and Windows operating system. Optionally, the LAS 28 can be fitted with a rotary axis (3-jaw chuck) for marking cylindrical parts. Further options, such as lateral extensions for marking long parts, are also available. Made in Germany • Fiber laser 30W (optional 20 or 50 watts) Csdpfx Asunh Hroplsrb • Wavelength 1064nm • Marking field size: 150x150mm (optional: 200x200mm) • Optional: rotary axis (3-jaw chuck) • Optional: digital height measuring system • Optional: extraction system (incl. activated carbon filter) • Optional: autofocus system – automatic focus distance determination • Signal lamp for operating status indication • EZCAD marking software (optional additional laser software) • Pilot laser (easy preview, contour preview) • Focus finder (easy focus adjustment) • Max. component height approx. 270mm • Electrically adjustable Z-axis (working level adjustment) • Frame made of aluminum profile • 230V power connection • Air-cooled • Laptop with Windows OS • Dimensions: 800x600x1660mm (LxWxH) • Weight: approx. 80 kg

Stanje: novo, Table length 3000 mm Table width 1500 mm Table height (side surface) 200 mm Weight 1374 kg SIEGMUND Authorized Dealer – All items available! Product Description - Through-hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality steel S355J2+N + plasma nitrided - Hole diameter Ø 28 mm - Surface holes arranged in diagonal grid - Corners, edges, and holes rounded - Side panel height 200 mm - Side panel holes in diagonal grid - Includes surface scaling - Construction reinforced by ribs - Grid lines enable precise setups The welding tables come standard with a scale. Cjdpoxabiwsfx Aplorb Plasma-nitrided version: - Protection against rust / scratches / adherence of weld spatter - Corrosion resistant / higher load capacity Equipment: - 28-hole system / Dimensions 3000 x 1500 x 200 mm - Extreme plasma-nitrided version with scale - With diagonal grid on the table surface - Side panel with diagonal grid - Incl. 6x standard feet

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height (side panel): 200 mm Weight: 1069 kg Space requirement: approx. 2400 x 1200 mm SIEGMUND Authorized Dealer – all items available! Csdpoxabffefx Aplerb The welding tables are equipped with a scale as standard. Special set – including 28-piece Tool Set 3 Product Description - Through-hardened tool steel X8.7 + plasma nitriding - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality S355J2+N steel + plasma nitriding - Bore diameter: Ø 28 mm - Bore holes on the surface in diagonal grid pattern - Edges, corners, and holes rounded - Side panel height: 200 mm - Bore holes on the side panel in diagonal grid pattern - Includes surface scaling - Design reinforced by ribs - Grid lines enable precise setups Plasma-nitrided version: - Protection against rust / scratches / adhesion of welding spatter - Corrosion-resistant / increased load capacity Specifications and Features: - 28-hole pattern / Dimensions: 2400 x 1200 x 200 mm - Plasma-nitrided Extreme 8.7 model with scale - Diagonal grid on table surface - Diagonal grid on the side panel - Incl. 4x basic equipment feet - Including 28-piece Tool Set 3: + 10x 280610.N Clamp + 6x 280630.N Clamp + 4x 280648.1.N Prism + 24x 280510 Dowel Pin + 4x 280740 Magnetic Dowel Pin + 8x 280410.N Stop + 8x 280420.N Stop + 6x 280110.N Angle Bracket + 2x 280152.N Angle Bracket + 2x 280162.N Angle Bracket + 1x 280166+67.N Angle Bracket + 1x 283999 Accessory Set

Stanje: zelo dobro (rabljeno), 2x Hahn+Kolb premični omari za orodje s 6 predali Cena velja za eno omaro za orodje! Obe skupaj staneta ustrezno 2400 € brez DDV. Rabljeno, a skoraj kot novo. Manjše sledi uporabe na delovni plošči, sicer popolnoma funkcionalno, vsaka z dvema ključema. Omara za orodje s 6 predali D x Š x V: 1025x705x930 mm Notranje mere predalov D x Š x V: 1x 880x590x240mm 5x 880x590x65mm Crsdpfxonucgxo Aplob Višina vključuje kolesa! Popolnoma funkcionalno. Možen osebni prevzem ali pošiljanje (preko špedicije).

Stanje: novo, Leto izdelave: 2024, Attention – Special Offer!! First Warranty Inspection Completely Free: Special offer valid only for customers who attended a demonstration before purchase – in the Otinus Machinery Showroom in Bydgoszcz. Handheld Laser Cleaner “3000W LCH-3000-N” The laser cleaner is an innovative device for precise and effective surface cleaning. It focuses a laser beam on contaminants, causing them to either vaporize or dissolve. Laser cleaners are used in various industries, from automotive to heritage conservation. These machines stand out for their high efficiency, minimal waste, and minimal interference with the surface of the cleaned object. Compared to conventional cleaning methods, a laser cleaner can be more precise and cost-effective. The following services are included in the machine price: A one-day training session and machine installation – up to 8 hours: installation and training relating to the control unit. Choice of MAX Photonics Crodpfx Apjr Eqbysljb The brand “MAX Photonics” was established in 2004. The company originated with the production of light and optical sources for scientific institutes. Top priority was given to product quality and operational stability. The company quickly realised that the future of laser technology is closely linked to fiber optics. Research and development, begun in 2007, led to the market introduction of their first 500 CW source in 2014. Since then, the company has been expanding its technologies intensively in the areas of laser cutting, welding, marking, and engraving. Currently, the company offers sources with output up to 40,000 W. At present, its goal is to become a leader in the production of high-power industrial lasers. Raycus “Wuhan Raycus Fiber Laser” was founded in 2007. The company focused on independent research and development, strengthened by mergers with other enterprises. It manufactures laser sources for a wide range of applications – including cutting, welding, soldering, marking, and engraving. Devices from this brand are used in the automotive, aerospace, medical, electronics, and advertising industries.

Stanje: novo, Leto izdelave: 2024, Diameter of holes: 20 mm Dimensions (LxWxH): 2250 x 1000 x 1000 mm Table width: 1000 mm Table length: 2250 mm Working height: 93–103 mm Tabletop thickness: 12 mm Medium-duty welding table Product Specifications – Welding Tables - Plate size: 2250 mm x 1000 mm - All-round reinforcement edge, 140 mm high, fitted with a double-row hole grid - Hole grid: 100 mm x 100 mm center-to-center - Equipped with required reinforcement ribs along width and length - Table material: S355, pickled and oiled - Legs equipped with height-adjustable ball joints - The welding table is oiled and pickled for a smoother working surface and reduced susceptibility to weld spatter Additional options: Engraved grid lines: €75 Hole diameter 16 mm: €80 Hole diameter 28 mm: €80 Cedpfjukkr Nsx Apljrb Diagonal hole pattern 50x50: €150 4 adjustable castors: €360

Stanje: novo, Table length: 2400 mm Table width: 1200 mm Table height (side panel): 200 mm Weight: 949 kg Required space approx. 2400 x 1200 mm SIEGMUND Authorized Dealer – all items available! Article No.: 7D.1 Cjdpfx Apexaayzolsrb Product Description - Fully hardened tool steel X8.7 + plasma nitrided - Material thickness approx. 24.5 – 27 mm - Side panel made from high-quality steel S355J2+N + plasma nitrided - Bore diameter Ø 28 mm - Surface bores in diagonal grid - Corners, edges, and bores rounded - Side panel height 200 mm - Boreholes in side panel arranged in diagonal grid - Includes surface scaling - Rib-reinforced construction - Grid lines enable precise setups The welding tables are standardly equipped with a scale. Plasma-nitrided version: - Protection against rust / scratches / weld spatter adhesion - Corrosion-resistant / higher load capacity Equipment: - 28 mm hole grid / dimensions 2400 x 1200 x 200 mm - plasma-nitrided "Extreme" version with scale - Side panel + tabletop with diagonal grid - incl. 4x standard feet