Oprema za varilno mizo

WMT P-SET 1

Stanje: novo, Cutting capacity at 90°: round 350 mm Cutting capacity at 90°: square 330 mm Cutting capacity at 90°: rectangle 500 x 310 mm Band speed: 15 - 100 m/min Table height: 844 mm Saw blade dimensions: 4250 x 34 x 1.1 mm Total power requirement: 2.2 kW Machine weight approx. 1.2 t Space requirements approx. 1.4 x 2.4 x 1.935 m SPECIAL OFFER PRICE!!! 2-Column Double Mitre Bandsaw K-tech DG 50/33 HA-I • 2-column mitre saw • Robust yet easy to operate • Material height sensor (automatic cut start detection) • Smooth running thanks to angled cut, feed regulator and cutting pressure regulator • Heavy-duty material infeed roller • Removable chip tray (for cleaning) • Energy-efficient and low vibration thanks to angled cut • Ergonomic, safe and free-standing control panel • Frequency-controlled saw drive 15 – 100 m/min • Hydraulic cutting pressure control valve • Hydraulic control of saw frame and vices • LEDs for monitoring all safety functions • Large-dimension drive wheels (520 mm) dia. • Intuitive mitre angle adjustment up to 60° Gsdpfxefg E Hls Ad Aeip Semi-automatic operation: 1. Clamp material 2. Saw starts 3. Rapid downfeed to start of material or immediate cutting for serial cuts 4. Saw band off 5. Raise frame just above material 6. Open vice

Stanje: novo, DM1100 2C – Edge Rounding Machine for Laser-cut, Plasma-cut, and Punched Parts Godpfx Adod Ev Upo Aoip NEW DESIGN – UNDER POWER FOR DEMONSTRATION – IMMEDIATELY AVAILABLE FROM STOCK The DM1100 2C rounds the upper and lower edges of metal parts from a minimum size of 150 mm up to a length of 1100 mm IN A SINGLE PASS. The first station processes the parts from below using two counter-rotating cross belts, while the second station processes the parts from above, also using two counter-rotating cross belts. The cross belts enable rounding of both the inner and outer edges of the workpieces. Sharp edges on steel, stainless steel, and aluminum parts produced by laser cutting, punching, or shearing are removed. Simultaneous processing of both sides of laser-cut or punched metal parts saves time and reduces production costs. Another advantage of the DM1100 2C is its ability to process small parts from 50 mm. By folding up a table, the rotation direction of the upper conveyor belt changes automatically, bridging the gap of the first processing station, so that parts go directly to the second station. This means that small products from 50 mm up to 150 mm can be processed on one side only. A further benefit is that the machine can edge round parts with protective film without damaging the film. Easy and tool-free cross belt change. Program for automatic positioning of the upper and lower belts ensures good accessibility and shorter changeover times. Simple to operate via integrated touchscreen. This machine is also available with a return conveyor system. Technical Data: Working capacity (Ø mm): 1100 x 50 Number of cross-belt stations: 2 Cross-belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Cross-belt motor (kW): (4x) 3 Feed motor (kW): (3x) 0.18 Total power (kW): 13.1 Power consumption (A): 30 Extraction connection per head (Ø mm): 150 Dimensions (mm): 2560 x 1980 x 2150 Weight (kg): 2210

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Getriebebohr- und Fräsmaschine Fervi T047/400VDA mit Gewindeschneidfunktion 400V 1,5kW NEUE HERSTELLUNG „CE“ Aktionspreis – nur einmal verfügbar, solange der Vorrat reicht. Die Maschine eignet sich für folgende Bearbeitungen: - Fräsen - Bohren - Gewindeschneiden Bohrleistung in Gusseisen (mit Vorbohrung): ø 40 mm Maximale Bohrleistung in Stahl (mit Vorbohrung): ø 32 mm Fräskapazität mit Wendeplattenfräser: ø 80 mm Fräskapazität: ø 25 mm Gewindeschneidleistung: ø 22 mm Konusaufnahme: MK 4 Spindelhub: 130 mm Pinolendurchmesser: ø 76 mm Säulendurchmesser: ø 115 mm Giodpsg Npiwjfx Ad Asp Kopfneigung: ± 60° Spindeldrehzahl (12 Stufen): 75 – 3200 min⁻¹ Drehstrommotor: 400 V 50 Hz 1,1 – 1,5 kW Tischgröße: 585 x 190 mm T-Nut: 12 mm Sockelmaße: 648 x 412 mm Gesamtmaße: 740 x 790 x 1960h mm Gewicht: 390 kg.

Leto izdelave: 2004, stanje: rabljeno, Ottevanger C5 Containerized Feed Mill Automated grinding and mixing line with a capacity of approx. 5 t/h. Including, among others, the following components: - 55kW Hammer Mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Batch Weigher - Dosing Screws - Elevators Gjdpfx Aoq Hr Rzjd Aeip - Hoppers - Control Cabinets

Stanje: novo, DESCRIPTION DM100 Z2C - Performs edge rounding and removes sharp burrs on both the inner and outer edges of steel, stainless steel, or aluminum parts after laser, shear, or punch separation of metal parts, from sizes of 50 x 50 mm up to 1100 x 100 mm. The first station processes the products with a contact roller (approx. 55° Shore) using an abrasive belt, removing heavy burrs in the initial step. Gijdpfx Asd Ixadod Aop The second station processes the products with two pairs of counter-rotating cross belts—from above and below. The cross belts round both the inner and outer edges of the parts to be processed. A major advantage is the deburring of products with protective surface film, as only the edges are processed without damaging the film. Technical Data – DM1100 Z2C: Working capacity (Ø mm): 1100 x 100 Number of belt stations (Z): 1 Number of cross-belt stations: 2 Abrasive belt dimensions (mm): 1100 x 2200 Abrasive belt speed (m/s): 8–22 Cross belt speed (m/s): 2–8 Feed speed (m/s): 0.6–3.2 Abrasive belt motor per head (kW): 18.5 Cross belt motor (kW) (2x): 3 Feed motor (kW) (3x): 0.18 Total power (kW): 33 Power consumption (A): 62 Extraction connection per head (Ø mm): 150 + 185 Dimensions (mm): 3600 x 2330 x 2350 Weight (kg): 5000

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm Gedpfoirax Uox Ad Aeip -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Leto izdelave: 1993, stanje: rabljeno, • Working width (mm): 2200 • Motor power (kW): 22 • Upper rollers: with PU rings Godpfxen I Twye Ad Asip • Lower rollers: corrugated • Saw shaft: included

Stanje: dober (rabljeno), Leto izdelave: 1995, CNC ciklični stružnica Giodpohktd Njfx Ad Aop Proizvajalec: MONFORTS KNC 6, l.1995 Krmiljenje: Monforts MTC K Konjična razdalja: 2000 mm Največji premer vrtenja nad ležiščem: 630 mm Največji premer vrtenja nad suportom: 380 mm Hitrosti vretena: 2 - 1800 min⁻¹ Vretenov motor: 21/15 kW Vreteninska odprtina: 71 mm 3-čeljustni vpenjalni tulec FORKARDT 400 mm Nosilec orodja Multifix velikost C s 3 orodnimi držali. Potreben prostor: dolžina 4000 mm, širina 2200 mm, višina 1900 mm Teža cca: 5000 kg Popolna dokumentacija stroja na voljo. Stroj je pod napetostjo in predstavljen v delovanju.

Stanje: novo, Sheet thickness: 1.6 mm Pressing force: 4 t Blade length: 156 mm Adjustable angle: fixed, from – to degrees Godpsftd Uajfx Ad Aeip Table area: 450 mm x 305 mm Total power requirement: manual operation (kW) Machine weight: approx. 95 kg Dimensions (LxWxH): 530 x 380 x 480 mm

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, 600 kg load capacity height-adjustable welding positioner with through bore 100 - 200 mm Table diameter 700 mm Horizontal height min. 0.65 m, max. 1.25 m Tilted height min. 0.45 m, max. 0.95 m Speed from 0.01 – 1.1 rpm Giodpfsd Anz Rjx Ad Aep Tilting angle up to 135° Hand and foot remote control with speed display Very robust construction