Varjenje tabele

WMT P-2990 x 1490

Stanje: novo, Dolžina mize: 2990 mm Širina mize: 1490 mm Višina mize: 850 - 900 mm Teža stroja: pribl. 0,8 t Varilna/pohrašena miza: z rezkanimi in razigranimi odprtinami Blsdoxpxrhspfx Altsk Premer luknje: 28 mm Miza je iz visoko legiranega jekla S355 JR, debeline 15 mm Površina ni obdelana. Stranske stranice: 165 mm Po višini nastavljiv od pribl. 880 do 980 mm Spodnja stran ojačana z rebrasto konstrukcijo. Vklj. talno ležaje Dodatna oprema opcijsko!! Ravnost površine 0,2 - 0,5 mm na 1000 mm.

Stanje: rabljeno, Number of spindles: 4 Drilling capacity in steel (diameter): 23 mm Drilling stroke: 150 mm Total power requirement: kW Machine weight approx.: t Bedpfet Hw U Njx Altjlk Space requirement approx.: m

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 1.000 h, vrsta upravljanja: CNC krmiljenje, stopnja avtomatizacije: samodejen, vrsta aktuacije: hidravlični, model krmilnika: CypCut FSCUT 3000DE, vrsta laserja: vlakenski laser, proizvajalec laserskih virov: Reci, laserske ure: 1.000 h, laserska moč: 2.000 W, najv. debelina jeklene pločevine: 12 mm, maks. debelina pločevine iz nerjavečega jekla: 6 mm, maks. debelina aluminijaste pločevine: 6 mm, Premer cevi (maks.): 245 mm, Dolžina cevi (maks.): 6.000 mm, delovna dolžina: 3.000 mm, delovna širina: 1.500 mm, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 3.000 mm, vhodna napetost: 380 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, vrsta hlajenja: voda, priključek za stisnjen zrak: 15 letvica, Oprema: centralizirani mazalni sistem, hladilna enota, odsesavanje hlapov, odsesavanje prahu, Fiber laser 2 kW for sheet metal cutting + tube cutting attachment Ø245 mm – complete set by HOYSOOK, model 3015, in very good condition – used only for short test production runs, year of manufacture 2024. Manufacturer: HOYSOOK Model: 3015 Year of manufacture: 2024 Fully industrial set Reason for sale: change in production profile Operating hours: < 1,000 h Description: Bedpfx Asytccgoltjlk For sale: modern fiber laser (2000 W) for cutting sheet metal and tubes. The machine is in fully industrial configuration, manufactured in 2024, with less than 1,000 operating hours on the laser source – practically as new. The machine is fully operational and ready for immediate commissioning at its new workplace. The equipment was only used for low-volume production and underwent only the initial run-in period (hour meter photo available in the gallery). The sale is due to a change in production profile – the machine will not be used as frequently as originally planned. Working parameters: • Sheet cutting working area: 3000 x 1500 mm • Max. tube length in attachment: 6000 mm, diameter Ø245 mm • Power supply: 380 V, 3 phase, 50/60 Hz • Positioning repeatability: ±0.03 mm • Maximum cutting speed: 50 m/min • Examples of cut materials: mild steel up to 12 mm, stainless steel 2 mm, aluminium 1 mm Industrial-grade equipment: Mechanics and drives: • Welded steel bed, hardened and tempered – maximum durability and stability • Gantry beam made of aluminium profiles • Veichi servo motors and controllers • France Moto gear reducer • YYC (Taiwan) rack and pinion • TBI ball screw • HIWIN (Taiwan) or SMAGIC (Japan) linear guides Laser head and source: • Raytools BM110 laser head with autofocus and automatic height tracking • Reci laser source, operating hours

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, *Video je samo primer, kako se lahko pripravi to celico Celica z brusilnim robotom Kuka KR 180 Brusilna celica Berger 2012 (zunanje brušenje A1) Bodpfx Aljg Saqvetolk - Skupna masa cca 6300 kg - Dimenzije celice: cca 4650 x 2400 x 3100 mm 6-osni robot Kuka KR 180 R2500 Extra - Leto izdelave 2011 - Krmiljenje KRC 4 - Dodatna os (7. os) Trakasta brusilna postaja BSS10 - max. dimenzije traku 3500 x 30 mm - max. premer kontaktnega kolesa 200 mm - Moč motorja 4 kW 2 x polirni postaji, - Premer polirnega koluta 350 - 600 mm - Moč 5,5 kW Omarica za menjavo prijemal Trakasti transporter Interoll Automation GmbH - Skupna dolžina cca 2000 mm - Širina traku cca 440 mm Imamo 4 takšne celice.

Leto izdelave: 2026, stanje: novo, Fully automatic orbital stretch wrapper packaging machine Bedpofuwrcjfx Altslk SPINNER 1500s + BN Application: Packaging, grouping and protection of long or bulky products such as furniture, doors, wood panels, etc. Operator side: - Pass-through direction right General technical data: - Main motor power: 2.2 kW - Max. ring speed: 50 rpm - Min. ring speed: 10 rpm - Electronic control components: Siemens, Schneider, LS - Total weight: 1,600 kg Standard equipment: - Powered conveyor (infeed and outfeed) for automatic product feed - Adjustable ring speed - Adjustable stretch tension with a mechanical brake device - Automatic stretch film clamping and cutting system - Automatic stretch hook system - Pneumatic front and rear presses that hold the product from above during the cutting process - Photoelectric sensor for automatic start of the wrapping process - Touchscreen for adapting machine parameters to product requirements - Operator safety systems Optional equipment: - Various types of conveyors - Infeed and outfeed rollers - Air bubble film unit (included in this offer) Technical features: Wrapping dimensions: - Max. length: unlimited - Min. size (W x H x L): 100 x 18 x 550 mm Conveyor specifications: - Usable length: 1,924 mm - Total length: 2,000 mm - Working height: 900 mm - Electric motor power: 0.75 kW - Max. speed: 10 m/sec - Load capacity: 150 kg/m Stretch film specifications: - Max. width: 250 mm - Max. diameter: 230 mm - Core diameter: 76 mm - Recommended material thickness: 23, 30, 35 microns Air bubble film unit: - Max. film width: 1,350 mm - Max. film roll diameter: 700 mm - Core diameter: 20 ~ 76 mm - Suitable film materials: PW film, PE bubble film, PVC film - Cutting and welding system: operating temperature 50°C ~ 150°C

Leto izdelave: 2011, stanje: zelo dobro (rabljeno), Cloos welding robot Qirox QRC 320 including V 6 controller, Pedestal for upright installation, Cloos welding machine Quinto II 603 (600 A), wire feeder, welding torch, torch hose package, mechanical cleaning, pressure booster 1 rotary tilting table WPK 5000, load capacity 500 kg, 1 pre-selection start, 1 control for customer-supplied sliding door Gas nozzle sensor, arc seam tracking, point editor The system will be completely overhauled and serviced before delivery. Bodpsizwv Nefx Altelk A second station with an additional identical rotary tilting table is possible.

Stanje: novo, Pressure: 600 Bending length: 6050 mm Distance between uprights: 5100 mm Installation height: 680 mm Maximum stroke: 455 mm Throat depth: 450 mm Dimensions (LxWxH): 7100 x 3275 x 3910 mm Weight approx.: 50,200 kg 4 axes (Y1, Y2, X, R): Yes, all axes via Esa S630 (2D graphic control) CNC crowning via control: Yes, via Esa S630 (2D graphic control) Motor power: 45 kW Standard equipment: KK Kletzer Europa We have put together a high-quality model for Europe. The KK-Industries CNC press brake, made in Turkey. Model: KK Kletzer EUROPA XL Bledpfx Alod Ehh Retjk The robust EUROPA XL press brake stands out for its high precision, accuracy, and versatile range of applications. The EUROPA XL features a very large installation height, resulting in a large stroke (cylinder travel). The throat depth is also exceptionally large to provide maximum flexibility. We focus on quality, which is reflected in the control system as well. As standard, we equip our machines with the high-grade Esa S640 (2D graphic control). Furthermore, the KKI Europa XL press brake is equipped with CNC-controlled Y1, Y2, X, and R axes via the control system. Of course, CNC crowning control with Esa S640 (2D graphic control) is included as well. We also make no compromises on the top tooling and die, fitting the KKI EUROPA XL CNC press brake with premium tools from EUROSTAMP Italy. Service quality is equally important: that's why we prioritize highly qualified personnel with extensive experience in CNC sheet metal processing. CNC axes: Y1, Y2, X, and R Esa S640 (2D graphic control) Backgauge with dual linear guide and ball screw Motorized crowning system with CNC control Heavy-duty height adjustment with handwheel; from 175 tons, heavy-duty version on linear guide Laser protection device on upper beam CE safety equipment Various options available Alternative controls: ESA 640 2D 15" touchscreen control – €4,520 ESA 675 W 3D 21" touchscreen control (Windows-based) – €6,485 DELEM 66 T 2D 17" touchscreen control (Windows-based) – €10,165 DELEM 69 T 3D 17" touchscreen control (Windows-based) – €16,350 KK-Industries GmbH There is something here for everyone!

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Širina pločevine: 4050 mm Bljdpfx Aloxu Nc Istsk Debelina pločevine: 8 mm Kot reza: 2 - 10° Hitrost rezanja: 0,053 m/s Dolžina mize: 710 mm Teža stroja pribl.: 10.100 kg

Leto izdelave: 2000, stanje: dober (rabljeno), Press force: 28 t X-axis: 2000 mm Bledpfxei Eld Ue Altek Y-axis: 1000 mm Machine weight approx.: 11,000 kg

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Bjdpfet Hwt Sox Altolk Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more