Palete tovornjak roko

WMT OSE 2,0t - 1800

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Total machine length: 415 cm Dcedpfx Asrigxyjdiok Machine tested, in original condition

Stanje: kot nova (razstavni stroj), MIG/MAG varilni stroj s inverter tehnologijo Trofazno napajanje, varilni stroj - Vključno z Master Software TERRA PME Tehnični podatki Napajanje Napetost (50/60 Hz): 3x400 ±15% Maksimalna vhodna moč: 22,9 kVA Maksimalni vhodni tok: 31,1 A Faktor moči PF: 0,73 Učinkovitost: 89% Počasna varovalka: 25 A Napetost v prostem teku: 61Vdc IP zaščita: IP23S Izolacijski razred: H Napajalni kabel: 4x3mm2 - 5 m Varjenje Nastavitveni razpon: 3-400A Delovni cikel MIG/MAG - 40 °C: 40% - 400A 100% - 330A Delovni cikel MIG/MAG - 25 °C: 100% - 400A Premer žice: 1,0-1,2 mm (opcijsko 0,6-1,6) Premer polnjene žice: 0,9 - 2,4 mm Dcodpew Rm Saefx Adiok Premer aluminijaste žice: 0,8 - 1,6 mm Hitrost podajanja žice: 0,5 - 22,0 m/min Premer koluta žice: Ø 200/300 mm Daljinski upravljalnik: da

Leto izdelave: 2014, stanje: pripravljen za uporabo (rabljen), Clamping force: 600 kN, weight: 9 t, operating hours: 3,638 h, equipped with ENGEL viper 20 handling robot. Dcjdpfsh Nypfex Adiok

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, skupna masa: 5.770 kg, skupna dolžina: 15.050 mm, nosilnost: 12.500 kg, delovna višina: 6.000 mm, dvižna višina: 6.000 mm, Oprema: dokumentacija / priročnik, Dvigalo ABUS mostovno dvigalo – Tip: dvogredni – Nosilnost: 12.500 kg – Dvižna višina: 6 m – Leto izdelave: 2018 – Tip dvižnega mehanizma: jekleno vrvno vitlo – FEM/ISO razred dvižnega mehanizma: 1Am / M4 Dimenzije – Razpon: 15.050 mm (od sredine do sredine) – Višina vgradnje: 970 mm – Širina kolesnega para z blažilniki: 3.370 mm – Medosna razdalja: 2.700 mm – Primerno za dvigalo tirnico: 50×30 mm – Skupna teža: 5.770 kg (od tega voziček 846 kg) Hitrosti – Dviganje: 5/0,8 m/min – Vožnja vozička: 20/5 m/min – Vožnja žerjava: 40/10 m/min Specifikacije – Upravljanje: ABUS radijski daljinski upravljalnik, vključno z rezervnim oddajnikom – Navodila za žerjav: da – Razstavljen: da, takoj na voljo – Števec ur: 306 ur (26. 6. 2025) Dcedpfx Adoy T Hfgoiek – Zadnji servis: 26. junij 2025 – Stanje: izredno dobro, redno vzdrževan

Stanje: dober (rabljeno), Various press brake tools, punches, dies Bending length: 2500 + 3050 mm Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 Dsdpfjw Emf Dex Adiock DE - 44143 Dortmund - Wambel

Stanje: zelo dobro (rabljeno), For sale: Hypertherm Powermax 800 plasma cutter in very good condition. /////Price listed per unit///// Hypertherm Powermax 800 Plasma Cutter Dsdeulc Ixspfx Adieck Plasma Cutter Description: The Powermax800 plasma cutting system uses an inverter power source to deliver a smooth DC output voltage, ensuring excellent cutting and gouging quality on mild steel, stainless steel, aluminum, and other metals. The Powermax800 power supply provides a consistent output current, adjustable from 20 to 50 amps, allowing for optimal performance across all metal thicknesses up to 1/2 inch (12 mm). At 50 amps, the Powermax800 can cut metals up to 3/4 inch (20 mm) thick and sever metals up to 1 inch (25 mm) thick.

Stanje: novo, Technical data: Working width: 970 mm Sanding width: 950 mm Working height: 3 - 160 mm 1 steel sanding unit 2 combination sanding unit with pad Pneumatically actuated sanding pad Abrasive belt dimension: 970 x 2150 mm Motor power for both sanding units: 11 kW Feed belt speed on converter: 16-18 m/sec Table height adjustment motor power: 0.25 kW Feed belt motor power: 0.55 kW Sanding roller diameter: 150 mm Sanding pad width: 50 mm Dcsdjg A D Anjpfx Adijk Abrasive belt speed: 18 m/s (1st unit) Compressed air consumption: 20 l/min Standard equipment: Mechanical oscillation system for the sanding belt without compressed air (ECO GEAR SYSTEM) Stepless adjustment of the feed belt via inverter 4-20 m/min Automatic star-delta start Steel roller on the first unit, rubber-coated roller on the COMBI unit Electronic table height display Automatic device for material thickness reading and table position setting Safety switches Automatic machine shut-off switches Main motor brake Rubber pressure rollers Double roller infeed and outfeed table Available immediately! Machine dimensions: Length: 1630 mm Width: 1656 mm Height: 2025 mm

Stanje: dober (rabljeno), Leto izdelave: 1995, premer zgornjega valja: 330 mm, najv. debelina pločevine: 23 mm, Manufacturer: IMCAR Model: SIHR Year of manufacture: 1995 - Extended end for profile bending rolls (Pipe & T-Angle) - Centralized lubrication - Digital readout for side roll position - Fully hydraulic machine - Hydraulic drop end - Hardened rolls Specifications Metric / US Standard Roll width: 3100 mm Plate thickness at 3x top roll diameter: 18 mm Plate thickness at 5x top roll diameter: 23 mm Pre-bending thickness: 20 mm Top roll diameter: 330 mm Side roll diameter: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min Number of driven rolls: 2 Power: 15 kW Dimensions (approximate) Dcsdpfewpku Dsx Adiek Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11,900 kg Please note: The information on this page is provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Therefore, it does not constitute representation or terms of contract. We strongly recommend verifying all critical details.

Stanje: novo, Load capacity: 30,000 kg Length: 6,000 mm Width: 2,500 mm Height: 823 mm Rear axle: steerable Front axle: steerable Tyre dimensions: 425 x 260 / dual-wheeled mm Machine weight: approx. 3.2 t Djdpfxsfrzvzs Adiock Space requirements: approx. 7.9 x 2.5 x 0.823 m Heavy-duty trailer featuring: - Double steering system (turntable steering) - Small turning radius - High tipping stability due to steering angle limiter - Extremely robust construction, resulting in low maintenance requirements - Removable tow bar, length 1,320 mm - Impregnated wooden platform - Standard paint finish may vary. Custom RAL colours available upon request. Photos show a 30t trailer with 8 m length. Drawing is accurate. Looking for different load capacities or dimensions? Please contact us.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019, obratovalne ure: 180 h, Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 8.000 mm, skupna širina: 1.200 mm, skupna višina: 1.300 mm, vrsta vhodnega toka: Klimatska naprava, vhodna napetost: 400 V, moč: 10 kW (13,60 KM), SOEST Universal Surface Line for oiling, staining, lye treatment, patinating, etc. Primarily for parquet surfaces up to 40 cm workpiece width. 1) Roller Machine RCR-400-L Reverse, for applying and removing surface products such as oils, stains, lacquers, etc. 2) Distributor Machine VP-400-1B-2P-2B with one brush, two disc pads, and two additional brushes. Suitable for distributing, working in, or patinating surface media into pores and/or for removing, spreading, and distributing materials to achieve desired surface effects. 3) Accessories: two replacement application rollers, brand new material pump (never used), four spare brushes, various distributor pads, and a pneumatic brush cleaning machine. This complete surface line is constructed for professional industrial use and is configured with full equipment options. A lot of additional accessories are included, such as extra rollers and cleaning machines. (See pictures!) Very robust construction, all motors with frequency control (Siemens). Speeds are steplessly adjustable in both forward and reverse operation. Maximum workpiece width approx. 410 mm. The line is in excellent condition with only about 180 operating hours and is therefore described as like new. This surface machine was only used as an auxiliary line in a parquet manufacturing facility and was only operated for certain surface techniques, which explains the low operating hours. It was only sporadically in use from 2019–2022. In 2023, our company downsized, and the machine has been stored ever since. It is therefore immediately available and is in almost pristine condition! Dsdpjyaiafofx Adijck We no longer require this line; therefore, it is for sale. The original price for this line in 2019 was approx. €87,000. The current selling price is negotiable. The surface line can be inspected by appointment. If required, we can also sell 10 drying trolley racks with this line. (YouTube video is only a sample video of a similar line configuration!)