Varilna miza

WMT 1300 x 800 Hubtisch

Stanje: novo, Table length: 1220 mm Table width: 760 mm Table height: 910 mm Weight: 226 kg Nitrided welding table workbench + 66 accessories included Benefit from the best of both worlds: the functionality and quality of GERD WOLFF welding tables combined with the mobility of a cart. The workbench has a replaceable, robust tabletop that accommodates all TM fixture components with a diameter of approximately 1.6 cm. This allows you to create ultimate, high-performance, compact mobile workstations. Lrjdpfx Ahjxqrhljusn Expand your clamping and fixturing possibilities and be prepared for new projects with the GERD WOLFF welding table workbench + fixture set. The GERD WOLFF welding table workbench with fixture set is a turnkey system for holding and clamping during welding and manufacturing. Clamp and fixate at any point on the reversible, double-sided precision ground, nitrided (heat-treated) 121.92 x 76.2 cm tabletop to ensure accuracy in all your setups. Technical specifications Hole diameter: approx. 1.6 cm Grid pattern: approx. 5 cm x 5 cm Tabletop size: 121.92 cm x 76.2 cm Tabletop thickness: approx. 1.6 cm ±0.01 cm Table flatness: ±0.0381 cm per 60.96 cm x 60.96 cm Table height: approx. 91 cm Static load capacity: approx. 680.4 kg Gross weight: approx. 222.26 kg Fixture Set (5/8-inch = 1.5875 cm) 2 x Inserta clamps, suitable for 1.5875 cm boreholes (UDN5150) 2 x Side clamps, suitable for 1.5875 cm boreholes 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT522K) 2 x Inserta locking pliers – suitable for 1.5875 cm boreholes (PTT634K) 2 x Magnetic V-pads for surface 2 x Locating pins, suitable for 1.5875 cm boreholes 2 x Angle brackets, 1.5875 cm boreholes (T50305) 2 x Angle brackets, 1.5875 cm boreholes (T50304) 4 x Stops, suitable for 1.5875 cm boreholes (T54203) 4 x Stops, suitable for 1.5875 cm boreholes (T54205) 4 x V-block spacers, suitable for 1.5875 cm boreholes 8 x D-stop bars, 1.5875 cm boreholes 8 x V-blocks, suitable for 1.5875 cm boreholes 10 x Ball lock bolts, suitable for 1.5875 cm boreholes 12 x Magnetic rests

Stanje: novo, Table diameter 900 mm Table load capacity 1.0 t Swivel range 135 degrees Lodpfxefv Axxe Ahusrn Rotational speed 0.12 - 1.2 rpm Faceplate height 820 mm Welding current 500 amperes Total power requirement 0.75 + 0.55 kW Machine weight approx. 1.1 t Space requirement approx. 1.5 x 1.0 x 0.9 m • Self-locking gearbox, therefore no overrun or backrun under eccentric load. • Electronic components from Schneider, Siemens, and Delta. • Infinitely variable speed control of the turntable via frequency inverter. • High stability due to robust construction. • Welding current transmission. • CE certificate. • Excellent price / quality ratio. • The D-HBE series is supplied as standard with a wired remote control and foot switch.

Stanje: novo, Table length 2400 mm Table width 1200 mm Load capacity 4000 kg Lifting height 510 - 1550 mm Ledpswz Rubofx Ahusrn Total connected load 1.5 kW Connection voltage 400 V Machine weight approx. 0.95 t Welding table on lifting table: Hole diameter: 28 mm The table is made of 15 mm thick steel S355 The surface is pickled and oiled. Tolerance: Top +/- 1 mm and on the sides +/- 1 degree. Side panels 150 x 10 mm Underside ribbed for reinforcement.

Stanje: novo, Leto izdelave: 2024, premer gredi: 80 mm, Profile Bending Machine AHB 100 - with universal rolls - three-roll drive - digital display for left and right bending axis - hydraulic side straighteners - hydraulic drive of the bending rolls - operation in vertical and horizontal positions - constructed according to CE standards - Bending capacity for flat bar max. 12x200 mm - Flat bent 200 x 40 mm - U-profile bending (inner and outer) 180 mm - Angle profile leg outside 100x100 mm Lrsdpovaw Elofx Ahuen - Angle profile leg inside 90x90 mm - Solid material round 75 mm - INP 140 - Shaft diameter 100 mm - Roll diameter 315 mm - Bending speed 5 m/min - Motor power 11 kW - Weight 2,600 kg - Maximum section modulus Wcm³ (module) - 400 Volt, 50 Hz, 3-phase - 1950 x 1600 x 2100 mm

Stanje: novo, Leto izdelave: 2026, nosilnost: 3.000 kg, Najvišja kakovost iz visoko trdnega konstrukcijskega jekla Q355, vključno s plazemsko nitriranjem in skaliranjem. Ledpfex Nih Nox Ahujrn 3D vrtalna miza 2400 x 1200 x 200 mm, mreža 100 mm, debelina plošče 20 mm, premer luknje 28 mm. Planirano obdelano, zelo masivno, teža ca. 950 kg. S štirikrat nastavljivimi nogami mize. Cena brez kompleta dodatne opreme, doplačilo 500 €. Zapakirana v leseno škatlo, povprašajte za dostavo.

Stanje: skoraj kot novo (rabljeno), Dvigralk palet iz nerjavečega jekla, Dimenzije vilic: (2x) 1150 mm x 160 mm Lrsdpfx Ahshlp Nfjuen Celotne dimenzije: 1600 mm x 530 mm x 1220 mm

Leto izdelave: 2026, stanje: novo, Technical Specifications: Lrsdpfx Ahjfhb Itsujn - Rated capacity: 700 L/cycle (at a filling temperature of 80°C) - Power requirement: 1 kW, 230 V, 6 A, single phase - Boiler output: 80 kW - Heating source: Oil - Oil consumption: 7.5 L/h - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 750 x 1700 x 1170 mm - Weight: 380 kg - Heat exchanger: Soft water - IP65 electronics - Connection: DN 65 - Automatic temperature control - Easy to clean using sponge balls - Minimal maintenance Optional: BB top 180 semi-automatic Bag in Box filling system + 6-station bottle filling unit with buffer tank

Stanje: novo, Table length: 1300 mm Table width: 800 mm Lift height: 1015 mm Load capacity: 3000 kg Lodpfx Ahevn Uzmousrn Minimum lift height: 220 mm Connection voltage: 400 V Total power requirement: 1.5 kW Machine weight: approx. 0.32 t Space requirement: approx. 1.3 x 0.8 x 0.23 m The hydraulic lift tables are electrically driven and operated. They feature a safety contact strip for secure lowering operations. Highly versatile for workshops, assembly departments, loading bays, etc.

Stanje: nepreverjeno (rabljeno), Spoštovani, ponujamo vam naslednjo napravo za prodajo: Keyence Agilista 3200W 3D tiskalnik. Stroj se prodaja z opremo, ki je dokumentirana na fotografijah in navedena v besedilu oglasa. Lokacija: 40764 Langenfeld Lrodpfx Ajwktwkshujn POZOR! Naprava izvira iz stečaja.

Stanje: rabljeno, 2 ultra-nizkoprofilni dvižni mizi za palete Model HY1501 Nosilnost 1500 kg Napajanje 240 V Dimenzije platforme 1600 mm x 800 mm Nizkoprofilna konstrukcija, 100 mm od tal Varnostne letve Priložena rampa Elektro-hidravlična pogonska enota Lsdpfxsh Rkmws Ahusrn Upravljalnik za operaterja V odličnem stanju