TP-Plus-2:90

Wittmann

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Control system: UNILOG B6 Clamping force: 4,500 kN Tie bar distance: 950 mm x 700 mm Minimum mold height: 330 mm Maximum mold height: 780 mm Screw diameter: 65 mm Maximum injection pressure: 2,070 bar Maximum shot weight: 980.9 g Servo-electric injection unit Servo package S0 ServoPower package S1 (hydraulic pump speed control for increased energy efficiency), integrated filter unit Injection unit: servo-electric (Knodler) with belt drive, injection speed 400 mm/s (servo injection control significantly reduces electricity costs and enables precise regulation of the injection process) Electric ejector with a force of 60 kN and a stroke of 180 mm Additional equipment: 1. Air valve 2. Cooling water flow controller 3. Digital interface for temperature controller (possibility for simultaneous control of six temperature controllers) 4. Interface for needle shut-off nozzle control in the tool 5. Interface for control of external hot runner controller Fpedpfjytfqaex Abvsd 6. Complete integration for Wittmann W8xx series robots 7. Button for quality control Language: Polish

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61037337, vpenjalna sila: 800 kN, premer vijaka: 30 mm, delovna prostornina: 113 cm³, tlak vbrizgavanja: 2.500 letvica, injekcijska masa: 103 g, minimalna višina orodja: 400 mm, izmetalna sila: 22.600 N, hod izmetalca: 150 mm, odmični hod: 900 mm, skupna dolžina: 3.960 mm, skupna širina: 1.480 mm, skupna višina: 2.020 mm, skupna masa: 3.550 kg, ogrevalna zmogljivost: 10,9 kW (14,82 KM), vrsta pogona: Hadraulisch, prosta razpetina: 470 mm, teža orodja: 1.000.000 g,

Stanje: rabljeno, številka stroja/vozila: 12861, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor 2 rows of stator knives Infeed opening approx. 400 x 600 mm Fpedpfxsyr Trco Abvjd Drive motor: 22 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, Wittmann Battenfeld EcoPower 110/350 / Electric Injection Moulding Machine / Operating hours: approx. 15,000 in automatic mode Year of manufacture: 2019 Injection Unit: Screw diameter: 35 mm Shot weight: 153.8 g Fsdpfx Absyli Adovepd Injection pressure: 2083 bar Dosage volume: 168 cc Clamping Unit: Clamping force: 110 t Tie bar distance: 470 x 420 mm Platen size: 682 x 682 mm Ejector: electric Clamping system: toggle Control: UNILOG B8 - touchscreen Additional Equipment: Machine in very good technical condition All-electric machine: energy efficient and very quiet Operating hours: approx. 15,000 in automatic mode Total operating hours: 21,800 Euromap 67 Robot interface Air valve x 1 Hydraulic core pull x 1 Control system with hot runner support Injection unit is wear-resistant and corrosion-resistant Central lubrication Dimensions: Weight: 4,800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All offered machines are started up and checked by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 61036940, vpenjalna sila: 1.600 kN, premer vijaka: 50 mm, delovna prostornina: 393 cm³, tlak vbrizgavanja: 1,892 letvica, injekcijska masa: 358 g, minimalna višina orodja: 200 mm, izmetalna sila: 33.000 N, hod izmetalca: 100 mm, odmični hod: 950 mm, vgradna višina: 500 mm, skupna dolžina: 5.650 mm, skupna širina: 1.820 mm, skupna višina: 1.950 mm, skupna masa: 9.700 kg, ogrevalna zmogljivost: 15,5 kW (21,07 KM), vrsta pogona: Vollelektrisch, prosta razpetina: 570 mm, teža orodja: 600.000 g, Injection Moulding Machines Direct from the Manufacturer! As the manufacturer KraussMaffei, we offer you our inspected and flexible stock machines: The entry-level injection moulding machine, precisionMolding, is the perfect solution for fully electric injection moulding, enabling you to respond quickly and innovatively to changing market demands. It combines high performance, easy operation, and short delivery times. The machine is suitable for a wide range of applications, such as the packaging industry, electronics and electrical industry, medical technology, and the automotive sector. Your benefits: – Optimized price-performance ratio for a broad range of applications – High energy efficiency thanks to a fully electric machine concept – Reliable and efficient delivery times due to a base machine concept with a wide spectrum of options TECHNICAL DATA: KM 160 / 750 PA G01 (Order 38670011) (Machine No.: 61036683, new, year 2013) CONTROL SYSTEM - MC P1 with 15" TFT colour display with multi-touch functions CLAMPING UNIT - Clamping force: 1600 kN - Maximum mould opening force: 120 kN - Daylight (H x V): 570 x 520 mm - Mounting platen (H x V): 770 x 720 mm - Mould installation height min. – max.: 200 – 500 mm - Maximum opening width: 950 mm - Maximum mould opening stroke: 450 mm - Ejector drive: electric - Ejector stroke: 100 mm - Ejector force, forward/reverse: 33 / 33 kN - Ejector speed, forward/reverse: 300 / 300 mm/s - Maximum mould weight: 1200 kg Fpedjugfw Djpfx Abvjd INJECTION UNIT - Screw diameter / type: 50 mm / standard - Effective L/D ratio: 20.2 - Injection pressure: 1,892 bar - Stroke volume: 393 cm³ - Shot weight at max. stroke for PS: 358 g - Injection speed: 200 mm/s - Injection flow rate: 393 cm³/s - Screw drive / rotation speed: 267 rpm - Plasticizing throughput (standard screw): 36.5 g/s - Nozzle contact force: 42 kN ELECTRICAL PARAMETERS - Connected load: 31.2 kW - Installed heating capacity: 15.5 kW - Power supply: 400 V / 50 Hz, 3 phases with neutral WEIGHT AND DIMENSIONS - Net weight (incl. control cabinet): 9.7 t - Length x width x height: 5.65 x 1.82 x 1.95 m ADDITIONAL FEATURES - Wear-resistant plasticizing unit - BluePower full insulation for plasticizing cylinder - Open nozzle - Air valve, single (BWAP) - Pneumatic control for hot runner shut-off, single - Electrical interface for pneumatic cascade, 4-fold - Euromap interface for handling: E18 + E67 - Euromap interface (central computer): E67, E77 - Water manifold, 4-fold - Electrical pre-installation for hydraulic auxiliary unit - Automatic central lubrication - Adaptive Process Control (APC) - Injection compression moulding circuit - Graphic analysis package - Swivel device for injection unit The machine is located at our facility in Parsdorf and is available at short notice. Additional options can be offered upon request. We look forward to your enquiry.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Wittmann Battenfeld HM 150/750 Servo Power / Hybrid Machine / Operating hours: approx. 29,000 in automatic mode Year of manufacture: 2014 Injection Unit: Screw diameter: 50 mm Shot weight: 402.2 g Injection pressure: 1714 bar Fpedpfjyliz Hsx Abvjd Dosage volume: 442 cm³ Clamping Unit: Clamping force: 150 t Tie bar spacing: 520 x 470 mm Platen size: 760 x 755 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6P - touchscreen Additional equipment: Machine in very good technical condition Electric machine: energy-saving and very quiet Operating hours: approx. 29,000 in automatic mode Total hours of operation: 36,714 Euromap 67 Robot interface Air valve x1 Hydraulic core pull x1 Injection unit is wear-resistant and corrosion-resistant Main motor of the machine – servo motor driven by inverter – energy-saving Dimensions: Weight: 6,600 kg Length/Width/Height: 4.82 x 1.42 x 2.20 m All machines offered are started up by our service technicians prior to sale. It is possible to obtain a video showing the technical tests of the selected machine, or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: zelo dobro (rabljeno), Leto izdelave: 2017, Wittmann Battenfeld EcoPower 110/350 with Wittmann W818 Robot / Electric Machine / Approx. 16,000 Operating Hours in Automatic Mode Year of Manufacture: 2017 Injection Unit: Screw Diameter: 35 mm Shot Weight: 153.8 g Injection Pressure: 2083 bar Dosage Volume: 169 cc Clamping Unit: Clamping Force: 110 t Tie Bar Distance: 470 x 420 mm Platen Size: 680 x 660 mm Ejector: electric Clamping System: toggle lever Control System: UNILOG B8 – Touchscreen Additional Equipment: Perfect technical condition Electric machine: high-speed, energy-efficient, and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control system with air valve Hydraulic core pull x 1 Hot runner control Injection unit is wear-resistant and corrosion-resistant Central lubrication Automatic mold height adjustment Fsdeyliz Tspfx Abvspd Parallel movements The machine has been serviced in Germany Wittmann W818 Robot Year of Manufacture: 2015 4-axis robot: 3 axes driven by servomotors (electric); C-axis – pneumatic Axis travel: X-420, Y-1200, Z-2000 Touchscreen control panel Safety package for robot Robot with adapter, conveyor belt, and safety enclosure Purchase of the robot and conveyor belt at extra cost Dimensions: Weight: 4800 kg Length/Width/Height: 4.91 x 1.42 x 2.10 m All offered machines are started and checked by our service technicians before sale. It is possible to obtain a video of technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request

Stanje: dober (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 191523, vpenjalna sila: 490 kN, premer vijaka: 30 mm, -KOM 3086- For sale is a used injection moulding machine. Technical data: Manufacturer: Engel Model: Victory 50 Designation: VC 200/50 Tech Fsdpov Tb U Dofx Abvjpd Clamping force: 50 t Year of manufacture: 2013 Machine no.: 191523 Screw diameter: 30 mm Tie-bar spacing: Tie-barless Locating ring diameter: 125 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Wittmann Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Moulding Machine with Rotary Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2,743 bar Dosing volume: 193 cc Clamping unit: Fpsdpfxjyliycj Abved Clamping force: 150 t Tie bar spacing: 0x0 mm Platen size: 1,280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection moulding machine with rotary table Hybrid machine: high-speed, energy-saving and very quiet Air valves x 5 Hydraulic core pull x 1 Controller with 12 hot runner zones Injection unit is wear-resistant and corrosion-resistant Rotary table diameter: 1,500 mm Rotary table driven by servo motor, controlled by frequency inverter Dimensions: Weight: 11,300 kg Length/width/height: 3.83 x 1.50 x 4.07 m All machines offered are commissioned by our service technicians before sale. It is possible to receive a video of the technical inspection of the selected machine or to attend live technical tests at our facility in Łódź. Price: On request

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 100 mm, pomik osi Y: 550 mm, Proizvajalec: Wittmann Tip: W 702 Leto izdelave: 2007 Možen ogled in preizkus! Fodpfxoyk U Hrj Abvjpd

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Transportne in dozirne naprave Blagovna znamka: A. Tschritter Tip: WC 100 Fsdpfx Abod Twgcovepd Leto izdelave: 2004

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 100 mm, pomik osi Y: 550 mm, Proizvajalec: Wittmann Tip: W 702 Fsdpsyk U Enofx Abvepd Leto izdelave: 2007 Možen ogled in preizkus!

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 100 mm, pomik osi Y: 550 mm, Proizvajalec: Wittmann Tip: W 702 Leto izdelave: 2007 Fpjdeyk U D Dspfx Abvod Možen ogled in preizkus!

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2019,

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), Proizvajalec: Wittmann Tip: TP-PLUS -2:90 Fpodpfjyk Uwksx Abvjd