Drugi

WesttecH Westtech Woodcracker CL190 Fällkopf Fällgreifer

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 237042, moč: 25 kW (33,99 KM), skupna masa: 1.575 kg, vrsta goriva: električni, barva: rumena, From personal experience: The battery easily lasts a full workday under continuous operation. Internal ID: M1241 Manufacturer: Schliesing Chassis type: Trailer chassis Drive type: Electric Maximum wood diameter: Ø 20 cm Feed width (mm): 240 Motor power: 25 kW – Torque of 120 Nm Year of manufacture: 2023 Operating hours: approx. 3 Net weight (kg): 1575 Features: Power Control System – WhisperCut chipping system The Schliesing mid-class is now also available as an electric chipper – the Schliesing 325MX-E chipper. The powerful brushless asynchronous motor delivers 25 kW and 120 Nm torque, ensuring productive work with proven throughput performance. The batteries are designed to allow operation for an entire workday without recharging. The 325MX-E enables emission-free chipping with low noise levels and delivers uncompromising productivity with logs up to 20 cm in diameter. Motor and Chassis: - Brushless asynchronous motor with 25 kW and 120 Nm torque - Fully galvanized, corrosion-resistant single-axle chassis rated for 80 km/h, including EU homologation - Robust, fixed, and widened steel mudguards - Heavy-duty front jockey wheel and rear support stand - Tow hitch with overrun brake and Soft-Dock ball coupling or DIN towing eye - LED lighting according to StVZO (shock-protected) - Pneumatic tires 205/65 R15 C Battery: - LEP battery (Lithium Iron Phosphate) with a capacity of 300 Ah at 96 V - Enables full-day operation of the chipper without recharging. No intermediate recharging required even after long standstill periods - Energy recuperation via recovery of kinetic energy from the chipping disc during operation - Charging port: Schuko plug 220-240V/16A - Charging time for full charge: 8 hours - Warranty for 1000 charge cycles at 80% SOH (State of Health) Housing/Chute/Discharge Spout: - Foldable infeed chute with minimum input depth of 1,500 mm - Fully galvanized, corrosion-resistant chute flap - Chute dimensions (inner): Width = 1,040 mm, Height = 960 mm - Swivel-mounted discharge spout with adjustable deflector - Discharge spout on ball bearing turntable - Key machine parts acoustically insulated (especially chipper hood and discharge spout) - Two emergency stop buttons on top of the chute and on the side of the chute flap Chipping Unit: - Chipping system with safety circuit to EN 13525 - Robust chipping disc Ø 655 mm, 35 mm thick - Enclosed knife system for fast, safe, and precise knife changes - Continuously adjustable chipper knives - Knives can be re-sharpened multiple times for a long service life (approx. 10x) - Horizontally usable counter-blade and vertically usable counter-cutter, each with two cutting edges for long service life Hfedpfx Aovmz N Usb Tor - Wrapping protection on the main bearing of the chipping disc Hydraulic Feed: - Feed control with independent hydraulic circuit - PowerGrip feed roller, 240 mm wide, with hydraulic feeding. Particularly grippy, aggressive, and uniform feeding thanks to a dedicated hydraulic motor per roller - Parallel-guided upper roller for constant, even feed, preventing jamming of input material - Feed speed (and thus chip size) hydraulically adjustable - Hydraulic oil tank with level indicator OPTIONS SUMMARY: WhisperCut® - V-shaped blades pull the wood in more evenly and with less vibration - In combination with the centering PowerGrip roller, chipping material is barely able to swing back and forth

Stanje: novo, številka stroja/vozila: wtcs750s, Westtech Woodcracker CS750 Smart – available immediately Equipment/features: - Endless rotating tiltator - Cutting diameter: 750 mm - Gripper opening width: 1,280 mm - Own weight (base version – fully equipped): 820 – 980 kg - Recommended hydraulic flow rate: 65 – 110 l/min - Recommended operating pressure: 230 – 280 bar - Carrier vehicle operating weight: 15 – 30 t - Saw box: actively sprung - Chain lubrication: grease - Option: Power tiltator, endlessly rotatable Several units in stock / Perfect fit for Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be offered in combination with a Magni telehandler. Also suitable for Merlo machines. Hodpfx Abeiady Ej Tofr We are an official Westtech Woodcracker distributor and service partner, Magni telehandler dealer and service partner, JCB construction machinery dealer and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles one of the largest commercial vehicle dealers in Germany. We offer the complete Westtech Woodcracker product range for you!

Leto izdelave: 2022, obratovalne ure: 20 h, Stanje: kot nova (razstavni stroj),

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 3 h, Funkcionalnost: popolnoma funkcionalen, moč: 33 kW (44,87 KM), skupna masa: 1.570 kg, vrsta goriva: dizel, barva: originalen, konfiguracija osi: 1 os, gorivo: dizel, Schliesing 325EX-D Wood Chipper: The Compact Unit with Rotatable Chipping Assembly The Schliesing 325EX-D wood chipper is a powerful machine designed for demanding wood chipping applications. Featuring a robust engine, versatile feed options, and durable construction, it is ideally suited for tough jobs. The swivel-mounted infeed hopper and comprehensive safety features ensure compliance with top-tier standards, making it an efficient solution for processing logs up to Ø 20 cm. Technical Specifications: Type: Schliesing 325 EX Log diameter capacity: Up to Ø 20 cm Feed width: 24 cm Engine power: 33 kW / 44.9 HP Weight: Approx. 1,570 kg Features: Engine and Chassis: - Water-cooled, Stage V 4-cylinder Kubota common-rail turbo diesel engine with DPF, outputting 33 kW / 44.9 HP - Industrial overrunning clutch between engine and flywheel protects engine, bearings, and shaft - Fully galvanized, corrosion-resistant single-axle chassis rated for speeds up to 80 km/h with EU type approval - Heavy-duty, fixed steel mudguards - Support wheel at the front and support leg at the rear - EU-compliant lighting system with impact-protected components Hjdpfx Aev Ev E Usb Tefr - 205/65 R15C pneumatic tires with EU type approval Body/Hopper/Discharge Chute: - Foldable infeed hopper with minimum feed depth of 1,500 mm - Fully galvanized hopper flap for long service life - Hopper internal dimensions: width = 1,040 mm, height = 960 mm - Swiveling discharge chute with adjustable deflector flap - Discharge chute mounted on a ball bearing slew ring for flexible orientation - Sound insulation on critical machine components such as the chipper hood and discharge chute - Emergency stop button on top of the hopper and on the side of the hopper flap Chipping Unit: - Rotatable chipping housing with adjustable feed angle up to 270° - Safety interlock in accordance with EN 13525 - Chipping disc with diameter Ø 655 mm and thickness 35 mm - Enclosed knife system enables fast, safe blade changes - Steplessly adjustable chipper blades, can be resharpened multiple times for extended service life - Horizontal counter-blade and vertical counter-edge each usable on two sides for high durability - Anti-wrap protection at the flywheel’s main bearing Hydraulic Feed: - Dedicated hydraulic circuit for feed control - PowerGrip feed roller (240 mm wide) with hydraulic feed ensures reliable, even material transport - Parallel upper roller guide prevents skewed feeding - Hydraulically adjustable feed speed for chip size regulation - Hydraulic oil tank level indicator

Stanje: novo, številka stroja/vozila: wcs510c, Westtech Woodcracker CS510 Crane – Grapple saw for cardanic mounting – available immediately Features: - Cutting diameter: 540 mm - Gripper opening width: 1,270 mm - Own weight (basic to fully equipped): 360 – 400 kg - Recommended oil flow: 50 – 110 l/min - Recommended operating pressure: 200 – 280 bar - Saw chain lubrication: Oil Hjdeiadzbspfx Ab Tefr We are an official Westtech Woodcracker distributor and service partner, as well as a Magni telehandler dealer and service partner, JCB construction machinery dealer and service partner, Mercedes-Benz service partner, Iveco service partner, and with 800 used vehicles in stock, one of the largest commercial vehicle dealers in Germany. We supply the complete Westtech Woodcracker product range!

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 55,4 kW (75,32 KM), skupna masa: 2.050 kg, vrsta goriva: dizel, barva: originalen, konfiguracija osi: 1 os, obratovalna teža: 2.050 kg, lastna masa: 2.050 kg, gorivo: dizel, Technical Data: - Log diameter up to 24 cm - Feed width: 300 mm - Base weight: approx. 2,050 kg - Year of manufacture: 2022 - 4-cylinder Hatz turbo diesel engine - With Common Rail technology and diesel particulate filter (DPF) - Complies with EURO 5 emissions standard - Mounted on single-axle chassis for 80 km/h - Power Control System - Water-cooled 4-cylinder Hatz turbo diesel engine, 55 kW (74.8 HP), with Common Rail technology and DPF - Fully galvanized single-axle chassis (80 km/h) - Tow bar with inertia brake - Front jockey wheel - Rear support stand - Road lighting compliant with StVZO (impact-protected) - Heavy-duty tires 205/65 R17.5 (EX) - Hydraulically adjustable feed speed to regulate chip size - Resharpenable chipping knives for long service life (approx. 10 times) - PowerGrip feed roller, 300 mm wide, with hydraulic feed - Exceptionally aggressive, grippy, and consistent feeding, each roller driven by its own hydraulic motor - Discharge chute with adjustable deflector flap, swiveling - Discharge chute mounted on ball bearing turntable - Key machine components with noise insulation Features: Engine and Chassis: - Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo diesel engine with DPF, rated at 55.4 kW (75.3 HP) - Automatically operated heavy-duty overrunning clutch between engine and flywheel protects engine, bearings, and shaft - Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV certification - Robust, fixed steel fenders - Front jockey wheel and rear support stand - Height-adjustable tow bar with inertia brake and soft-dock ball coupling or DIN towing eye - Road lighting per StVZO, with impact-protected components - Heavy-duty tires 205/65 R17.5 - Fuel level gauge for easy monitoring - EU homologation Housing / Hopper / Discharge Chute: - Rotatable chipping unit housing, adjustable feed angle up to 270° - Folding feed hopper with minimum feed depth of 1,500 mm - Fully galvanized hopper flap for durability - Hopper dimensions (internal): width = 1,160 mm, height = 1,040 mm - Swiveling discharge chute with adjustable deflector flap - Discharge chute mounted on ball bearing turntable for flexibility - Noise insulation for key machine components such as the chipper hood and chute - Emergency stop button located on top of hopper and on hopper flap side Chipping Unit: - Safety circuit according to EN 13525 - Flywheel/chipping disc diameter: Ø 800 mm, thickness: 40 mm Hedpfx Abov Evx Uo Tsfr - Enclosed knife system for quick and safe knife changes - Infinitely adjustable chipping knives, resharpenable for long service life - Horizontal counter-blade usable on four sides, vertical anvil blade usable on two sides for extended service - Wrap protection at main flywheel bearing Hydraulic Feed: - Feed control with independent hydraulic circuit - PowerGrip feed roller (300 mm wide) with hydraulic drive for secure and consistent material feed - Parallelogram-guided upper roller for uniform feeding without jamming - Hydraulically adjustable feed speed to regulate chip size - Hydraulic oil tank level indicator.

Stanje: novo, številka stroja/vozila: wtcl260, Westtech Woodcracker CL260 - immediately available - Year of manufacture: 2022 Cutting diameter softwood (mm): 320 Cutting diameter hardwood (mm): 260 Grapple opening = shear opening (mm): 760 Own weight (basic version / fully equipped) (kg): 350 / 630 Recommended hydraulic flow main circuit (l/min): 50 – 100 Recommended operating pressure main circuit (bar): 280 Recommended hydraulic flow auxiliary circuit (l/min): 40–60 Recommended operating pressure auxiliary circuit (bar): 200 Carrier vehicle operating weight (t): 6 – 14 Optional: Autospeed Optional: Collecting grapple Optional: Cylinder swivel unit: 2 x 48° Adapter plates (MS01 / MS03 / MS08 / etc...) available on request. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. Hedpfx Abjiadypo Tofr We supply the complete Westtech Woodcracker range for you.

Stanje: novo, Leto izdelave: 2024, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, največja višina reza: 150 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min • Mitre cuts left up to 60° Hfsdpjt I R Edofx Ab Tor • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Delivery time: ex stock Waiblingen Beinstein

Stanje: rabljeno, skupna masa: 3.000 kg, konfiguracija osi: 2 osi, prva registracija: 01/1987, dolžina tovornega prostora: 4.035 mm, širina tovornega prostora: 2.260 mm, * Empty weight: 1,080 kg Hodstu Sl Nepfx Ab Tofr * Permissible total weight: 3,000 kg * Loading ramps * Jockey wheel -----Internal vehicle number: 9554----Subject to errors and prior sale.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Klockner 120x400 H-2WT Wood Chipper – German manufacture – Shafts in very good condition TECHNICAL SPECIFICATIONS: Feed opening width: 400 mm Hfodpfx Abethfm Us Ter Feed opening height: 120 mm Number of knives: 2 Rotor diameter: 420 mm Main motor power: 30 kW Feed motor power: 2 x 2.2 kW Lower feed shaft: toothed, driven Upper feed shaft: toothed, driven Screen: diameter 20 mm Infeed conveyor length: 2600 mm Transport dimensions (L/W/H): 300 / 245 / 170 cm Weight: 1500 kg