WEIMA WLK10 55KW

WEIMA WLK10 55KW

Stanje: dober (rabljeno), Leto izdelave: 2007, Einwellenzerkleinerer Weima WLK10 Tjdpetpcpnsfx Abgof Hauptantrieb 55 kW Rotorlänge 100 cm Die Maschine ist zu 100 % funktionsfähig.

Leto izdelave: 2024, Stanje: novo, ♻ Univerzalna uporaba (različni les, palete z žeblji, iverne plošče plošče, odpadki in ostanki, furnir, MDF plošče, kartonske škatle, plastika, tekstil, gume itd.). ✔ Moč: 55/75/90/110 kW ✔ Dolžina gredi: 1400 mm ✔ Premer gredi: 315 mm ✔ Število vrtljajev gredi: nastavljivo ✔ Število rezalnih nožev: 60 ✔ Granulacija: 15-90 mm ✔ Kapaciteta: do 17 m3/h* ✔ Polnilna odprtina: 1400 x 1800 mm Tedjn Nwxfepfx Abgef ✔ Mere D/Š/V: 2,20/3,10/2,80 m ✔ Teža: 7000 kg 2 leti garancije ali 2000 delovnih ur

Stanje: dober (rabljeno), Leto izdelave: 2007, Einwellenzerkleinerer Weima WLK10 Hauptantrieb 55 kW Rotorlänge 100 cm Die Maschine ist zu 100 % funktionsfähig. Tedpfxotpcn Uo Abgof

Stanje: rabljeno, Leto izdelave: 2000, Technical details: Drilling capacity in steel (diameter): 18 mm Throat depth: 250 mm Drilling stroke: 100 mm Drilling capacity in cast iron: Ø 23 mm Distance spindle/table max.: 75 / 400 mm Speed range: 225 - 4,300 / 2x 8-step rpm Spindle taper: MT 2 Feed: manual mm/rev Table clamping surface: 250 x 250 mm Vertical adjustment: 325 mm Table clamping surface (L x W): 250 x 250 mm Rotating table: 360° Tjdpfx Abou R Uncegjf Base plate clamping surface: 320 x 250 mm Distance from spindle centre to base plate: 565 mm Column diameter: 90 mm Total power requirement: 0.55 kW Machine weight approx.: 160 kg Dimensions (L x W x H): 0.9 x 0.6 x 1.1 m High-performance drilling machine Thread cutting in steel possible up to M10 and in cast iron up to M14 Equipped with quick-action chuck Röhm 3 -16 mm Operation via control panel / foot switch

Stanje: novo, Leto izdelave: 2023, številka stroja/vozila: PRJ065958, ALZMETALL Bench Drill Press, Drilling Capacity in Steel: 16mm Short Taper Spindle MK2, Spindle Travel: 80mm, Throat Depth: 190mm, Column Diameter: 65mm, Machine Table Usable Surface: 300x240mm, with T-slots 2 x 12mm x 80mm, Distance Spindle to Table min./max.: 75/357mm, Table Height Adjustment by Hand Crank, Machine Table Base Plate, Usable Surface: 300x240mm, with T-slots 2 x 12mm x 80mm, Distance Spindle to Base Plate min./max.: 437/437mm, Manual Feed, Machine Height without Options: 825mm, Net Weight: 83 kg. - Stepless speed regulation: 100-2000 rpm Standard Equipment: 5" TFT - LCD display with touch function: Manual input of target spindle speed, real-time speed display, integrated drilling depth indicator with touch reference point reset, virtual drilling depth scale in the display, machine status displays and warning notifications, service information, selectable operating language DE/EN/FR/ES/IT/NL/RU AC Motor 230 Volt, 50 Hz, plug pre-installed, cable length 2m, Three separate push buttons for forward, reverse, and stop, Spindle holding via brake function, spindle guard with electrical interlock, lockable main switch, mushroom-type emergency stop push button (latching), stepless speed adjustment via potentiometer, IP54 protection class, spindle guard with electrical interlock, finish: DD texture paint, signal white RAL 9003, PANTONE 7545c, black Incl. the following options: Todpfx Ajlubw Isbgof LED work light Pos. 12. Delivery time: ex stock Waiblingen Beinstein

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2012, obratovalne ure: 25.895 h, Funkcionalnost: popolnoma funkcionalen, stiskalna sila: 78 t, širina odprtine za polnjenje: 1.100 mm, dolžina polnilne odprtine: 1.500 mm, širina bale: 1.100 mm, višina bale: 750 mm, teža bale: 600 kg, skupna masa: 24.000 kg, kapaciteta rezervoarja za olje: 1.000 l, moč: 55 kW (74,78 KM), volumenski pretok: 930 m³/h, Technical Data – Baler: Manufacturer: Presona AB Model: LP 80 VHK 1 Year of manufacture: 2012 Total machine operating hours: 25,895 hours (as of July 2025) Pump effective operating hours: 14,135 hours (as of July 2025) Total number of bales pressed: 235,597 pcs (as of July 2025) Main press force: 78.5 t Specific pressing force: 95 N/cm² Pre-press force: 28 t Press chamber volume: 2.7 m³ Feed hopper dimensions: 1,500 x 1,100 mm Theoretical throughput: 930 m³/h Throughput under operating conditions: 410 m³/h Bale dimensions: 750 x 1,100 mm Drive power: 55 kW Tying system: 5-fold vertical, 3-fold horizontal, fully automatic Throughput at bulk density of: - 30 kg/m³: approx. 9 to 12 t/h, depending on material - 50 kg/m³: approx. 14 to 17 t/h, depending on material - 100 kg/m³: approx. 16 to 25 t/h, depending on material Throughput for MSW (Municipal Solid Waste): approx. 20 to 27 t/h, depending on material Bale weights: 450 to 600 kg, depending on material and bale length Hydraulic oil tank volume: 1,000 L Installed dimensions with hopper: 10,985 x 3,750 x 4,310 mm (L x W x H) Transport dimensions (press only): 10,985 x 2,300 x 2,900 mm Machine weight (press): approx. 24 t Condition of the baler: The machine has been partially overhauled and serviced in our workshop. Upon completion of the works, it has been tested in both manual and automatic mode during live operation. The following refurbishment works were carried out: - Machine cleaned, partially derusted and partially repainted - Hydraulic oil tank drained completely and cleaned - Oil and air filters replaced, new hydraulic oil filled - Press ram dismantled and cleaned - All four running rollers on the press ram dismantled and replaced - Wire station with deflection rollers for the lower wire cleaned and made operational - Side guides removed from press ram, smoothed, mounted, and readjusted - Main hydraulic cylinder dismantled and stripped for inspection - Piston rod replaced, cylinder tube honed - Complete set of seals replaced, pressure test performed - Hydraulic hose for main hydraulic cylinder replaced - Vertical and horizontal needle binding systems dismantled, cleaned, wire deflection rollers serviced - Chain cleaned, greased, and chain tension readjusted - Drillomat cleaned, wire cutter, twisting shafts and fingers checked, serviced, and retightened with torque control - Door contact switches checked and partially replaced - Emergency stop switch checked Tedpfx Asvwlqqjbgjf - Complete electrical wiring checked and partially renewed - Bearings of wire guide rollers under the press replaced - New safety guards for vertical and horizontal binding fabricated and installed - Machine checked, general maintenance performed, and baler tested in both manual and automatic operation Scope of delivery: Only the baler itself is being offered for sale. Remarks: Complete documentation is available (operating manual, CE declaration, electrical/hydraulic schematics). Viewing is possible by appointment. No liability is accepted for the technical information or potential errors.

Stanje: novo, - Motor power: 9 kW - Control system: PLC-assisted, two-hand safety control - Cutting force: 35 tons - Splitter table: straight version - Cutting channel: - Maximum blade length: L = 2000 mm - Maximum opening height: H = 1200 mm - Machine weight: approx. 4 tons - Hand protection grille in the area of the control panel and on the opposite side - Forklift entry shoes included (for easy transport of the machine by forklift truck) Tjdpfxed Hf Tde Abgef In stock – immediately available Price and further information on request

Stanje: rabljeno, številka stroja/vozila: 13292, Rotor diameter: 368 mm Todpfxowmg Sgs Abgef Rotor width: 1500 mm Rotor knives: 82 Stator knives: 1 row Drive motor: 90 kW

Stanje: dober (rabljeno), Leto izdelave: 1998, Offer 25232 Technical data: - Drilling capacity in steel ST 60: 32 mm - Maximum drilling capacity in steel ST 60: 46 mm - Tapping capacity up to: M 30 - Drill spindle taper: MT 4 - Drill spindle stroke: 160 mm - Throat depth: 300 mm - Table with 2 T-slots: 615 x 430 mm Tjdpfswyupysx Abgjf - Column diameter: 145 mm - Electromagnetic feeds: 0.1 - 0.2 - 0.3 - 0.4 mm/rev - Infinitely variable spindle speeds with digital display: 80 - 4000 rpm - Drive: 400 V / 1.4 / 2.2 kW - Electric foot switch - Lighting - Machine vise - Required space approx.: W 650 x H 2100 x D 1100 mm - Weight approx.: 450 kg

Stanje: dober (rabljeno), EINWELLEN-ZERKLEINERER WEIMA MODELL WLK15 HAUPTMOTOR 90 KW Tjdpotqd Ndefx Abgjf