Teleskopski viličar

Weidemann Teleskopradlader T 4512

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2023, obratovalne ure: 470 h, nosilnost: 2.500 kg, dvižna višina: 5.850 mm, vrsta goriva: dizel, gradbena višina: 1.920 mm, lastna masa: 4.800 kg, vrsta pogona: Diesel, gradbena širina: 1.810 mm, Rigid telescopic handler Load centre: 500 Technical condition: very good Front tyres type: Pneumatic Front tyres size: 12-16.5 Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 12-16.5 Rear tyres condition: 80 - 100% Battery voltage: 12V Pgodpov Ntfysfx Altsp Image for illustration purposes only - Fork carriage - Interior rear-view mirror - Radio antenna - Radio pre-wiring - Additional hydraulic function info - Tilt function shut-off JSM - Sun visor, front roof window - Rear-view mirror at the rear of the machine - Roof window wiper - 95mm power cable - Engine pre-heating - Diesel pre-heater - EU version - Easy Link STD module 3rd valve, rear work lights, front work lights, particulate filter, fully enclosed cab, CE certificate,

Stanje: rabljeno, Leto izdelave: 2018,

Stanje: novo, Leto izdelave: 2025, moč: 37 kW (50,31 KM), _____Šäffer-naloževalnik, tip 3650, z zaščitno streho ROPS Kubota dizelski motor D1803-CR-T3, 37 kW = 50 KM Zadnja plošča za uteži, hitra vožnja 20 km/h, hidravlična zaklepanje orodja, sistem za zadrževanje z navodilom za uporabo Posebna oprema: Dodatna utež 100 kg Hidravlične priključke z vtičnimi spojkami Osvetlitvena naprava Poročilo TÜV za delovno strojno opremo Samovozno vozilo < 25 km/h Psdpfjx Evdvsx Altegp (osvetlitvena naprava v skladu s StVZO je obvezna) Komplet delovnih luči LED, 800 lumnov (2 spredaj in 1 zadaj) Naprava za vleko z vijakom in pritrdilnimi zankami Pnevmatike 15.0/55-17 AS, 6 lukenj, ET -45 Nosilni okvir Euro-WS, hidravlična zaklepanje Lokacija: null

Stanje: novo, Leto izdelave: 2025, We are the official Sunward dealer for Berlin, the state of Brandenburg, and Eastern Saxony. Visit us and discover our impressive selection and quality. We have approximately 20 excavators in stock at all times. Mini Excavator Sunward SWE25UF – Short-tail New machine Operating weight: 2,650 kg Kubota 3-cylinder diesel engine D1105 Power: 15.4 kW/2,400 rpm Cab with air-suspended seat and heating, radio with USB Width: 1.50 m Pgedpfx Aoyq A Rljltsp 2 travel speeds with auto shift – articulated boom (can work directly along walls and hedges) – long dipper arm – digging depth: 280 cm LED headlights – Aux 1 proportional on joystick – Aux 2 proportional on joystick 2 auxiliary hydraulic circuits (grab/hammer/shear) 5-year warranty. Options: MS03 quick coupler Accessories such as buckets, hydraulic hammer, grab Powertilt available on request Matching trailers also in stock. All information without guarantee. Take advantage of this unique opportunity to acquire a top-class professional machine at an unbeatable price. Sunward is among the world’s 20 largest excavator manufacturers. Inspection possible at any time by telephone appointment. We also accept trade-ins of your used equipment. For quotation requests, please provide your full address and e-mail address! We are your official Sunward dealer for the following regions: Districts: Wittenberg, Nordsachsen, Leipzig, City of Leipzig, Elbe-Elster, Oberspreewald-Lausitz, City of Cottbus, Spree-Neiße, Oberhavel, Barnim, Märkisch-Oderland, City of Frankfurt (Oder), Oder-Spree, Dahme-Spreewald, Teltow-Fläming, Potsdam-Mittelmark, City of Potsdam, City of Brandenburg, Havelland, City of Berlin.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 3.800 kg, dvižna višina: 10.000 mm, vrsta goriva: dizel, tip droga: teleskopski, moč: 79 kW (107,41 KM), lastna masa: 7.330 kg, vrsta pogona: Diesel, Rigid telescopic handler Mast type: Telescopic Speed class: 40 km/h Condition: New machine Technical condition: New Front tyres type: Pneumatic Front tyres size: 400/70-24 Front tyres condition: 80 - 100% Rear tyres type: Pneumatic Rear tyres size: 400/70-24 Rear tyres condition: 80 - 100% Description: - FEM carriage incl. forks and lifting hook – €2,650.00 - Earth bucket 2200 mm 1 m³ – €1,998.00 - Adapter for Euro-hitch – €1,339.00 Additional equipment: 3rd hydraulic valve, 4th hydraulic valve, rear work lights, front work lights, heater, full cabin, air conditioning, CE certificate, external mirrors, joystick control, beacon, windscreen wiper, LED lighting Specifications: Pgjdpjw Eqc Tjfx Altep - Rated capacity: 3,800 kg - Lift height: 10.0 m - Max. gradeability: 40% - Unladen weight: 7,330 kg - Engine: KUBOTA 79.5 kW (107 hp) - Displacement: 3,769 cm³ - Emission standard: Stage 4f - Steering: All-wheel steering / crab steering / front-wheel steering - Rear hydraulics - 40 km/h - Air-conditioning - Air suspension seat - Carrier plate with hydraulic quick coupler - Steering warning indicator

Stanje: novo, Pressure 500 t Column clearance 600 mm Stroke 600 mm Table surface 3500 x 1500 mm Distance cylinder to table 600 mm Downward speed from 8 mm/sec Upward speed 16 mm/sec Travel on the bed 2200 x 900 mm Total power requirement 30 kW Machine weight approx. 28 t 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates precisely machined with a CNC milling machine - Chrome-plated cylinder - Worktable with threaded holes HYDRAULICS - Hydraulic pump by Bosch Rexroth - Hydraulic directional valve by Hydrapack or Badestons - Hydraulic manifold according to EN standards - Hydraulic oil tank 1000 liters - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet per EN standards - All cables are labeled and neatly arranged - All electrical components by Siemens CONTROL PANEL - Stroke control at any position - X, Y, and Z axis movement via remote control - Stroke adjustment via sensor SAFETY - The machine complies with EU safety standards 2006/42/EC Machinery Directive, EN ISO 16092-1 and 16092-3 - Two-hand operation - Emergency stop button - Safety rope with switch around the press 4. TRANSPORT AND INSTALLATION Pgedofv Awhepfx Altop - Price includes transport costs, installation, and training at the customer's facility. - Hydraulic oil is not included in the price. - All handling costs (e.g. crane, forklift, etc.) are to be borne by the buyer. 5. WARRANTY - The machine comes with a 2-year manufacturer's warranty. - This warranty includes delivery of all spare parts required for repair and a service visit for the machine. Damaged parts will be returned to the manufacturer after being replaced with a new part. - This warranty does not cover parts damaged due to improper use.

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, prevoženi kilometri: 0 km, barva: rdeča, lastna masa: 2.050 kg, največja dovoljena obremenitev: 650 kg, dvižna višina: 3.330 mm, širina izkopne žlice: 1.160 mm, Leto izdelave: 2025, Oprema: standardna žlica, vilice za palete, TECHNICAL DATA: Model: VOLT 600 Payload (kg): 650 Unladen weight (kg): 2050 Bucket capacity (m³): 0.25 Max steering angle: ±45° Turning radius (mm): 2050 Rear axle oscillation angle: 19° Total cycle time (s): 8 Working time (h): 6 Speed (km/h): Low: 10 km/h, High: 20 km/h Dumping height (mm): 2170 Lifting height (mm): 3330 Dimensions (mm): 3810 × 1260 × 2270 Dumping reach (mm): 405 Bucket width (mm): 1160 Wheelbase (mm): 1380 Track width (mm): 890 Ground clearance (mm): 200 BATTERY: Model: 3-EVF-200 Type: Maintenance-free lead-acid battery Quantity: 12 Capacity (kW): 14.4 Rated voltage (V): 72 Charging time (h): 8 System voltage (V): 12 Electrical system: AC MOTOR: Voltage (V): 72 Power (kW): 5 Displacement (ml/r): 23 Rated speed (rpm): Low: 800 rpm High: 2200 rpm System pressure (MPa): 16 Hydraulic system: Steering type: Fully hydraulic steering System pressure (MPa): 14 Steering pump: 5–125 Cylinder dimension (mm): 63 × 190 mm Number of cylinders: 1 DRIVE: System: AC Voltage (V): 72 Power (kW): 4 × 2 Number of motors: 2 Tyres: 26×12.00–12 Tyre pressure (MPa): 0.25 PRICE: €14,500 net €17,255 gross KINGWAY DEUTSCHLAND is the only stationary distributor of the Kingway brand in Germany. Only here can you view and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the main branch of Kingway in Germany. We have a huge selection of machines in stock, with around 100 machines available at any time. We deliver machinery throughout Germany, Austria, Switzerland, Italy and other neighbouring countries. We also offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND e. K. Podpfxjw Ufple Altegp Jakub Dylus 84098 Hohenthann Gambacherstr. 4 WAREHOUSE: Untergambach 10 84098 Hohenthann

Stanje: rabljeno, Leto izdelave: 2021, velikost sprednje pnevmatike: 600/65R28, velikost zadnje pnevmatike: 710/70R38, Oprema: zavorni sistem na stisnjen zrak,

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 585 mm, pomik osi Y: 185 mm, pomik po osi Z: 320 mm, skupna višina: 2.245 mm, skupna širina: 1.340 mm, skupna dolžina: 1.140 mm, širina mize: 240 mm, dolžina mize: 1.000 mm, vrsta vhodnega toka: trifazni, največja hitrost vrtenja: 2.000 obr/min, vrtljajska hitrost (min.): 100 obr/min, skupna masa: 1.000 kg, delovno območje: 650 mm, vhodna napetost: 400 V, razdalja od mize do središča vretena: 370 mm, vhodna frekvenca: 50 Hz, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Vrtalna zmogljivost jekla ----- 50 mm Rezkalna zmogljivost jekla ----- 25 mm Obodna rezkalna zmogljivost ----- 100 mm Premik v vzdolžni smeri (X) ----- 585 mm Premik v prečni smeri (Y) ----- 185 mm Premik v višini (Z) ----- 320 mm Horizontalni motor ----- 1,5 kW Vertikalni motor ----- 2,2 kW Pgedjga Twfjpfx Altep Horizontalno rezkalno vreteno ----- 60 ~ 1350 obr/min (9) Vertikalno rezkalno vreteno ----- brezstopenjsko 100-600 / 350-2000 obr/min Vpenjanje vretena ----- ISO 40 Miza ----- 1000 x 240 mm Teža ----- 1000 kg VKLUČUJE * DELTA frekvenčni pretvornik * 3-osni digitalni prikaz SINO * Avtomatski vzdolžni in prečni pomik delovne mize * LED osvetlitev * Hladilni sistem * Luksuzna upravljalna omarica * Nagibna rezkalna glava levo/desno 0 - 45 stopinj * Zasučna delovna miza * Razni držala v kovčku

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, moč: 5,5 kW (7,48 KM), vhodna napetost: 400 V, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, širina brusilnega traku: 150 mm, dolžina brusnega traku: 7.000 mm, vrsta nastavitve višine: električni, skupna višina: 2.200 mm, skupna dolžina: 3.550 mm, skupna širina: 2.000 mm, skupna masa: 870 kg, dolžina brušenja: 1.500 mm, teža obdelovanca (maks.): 80 kg, premer povezave za izpihovanje: 180 mm, širina brušenja: 950 mm, največja hitrost vrtenja: 1.435 obr/min, potrebna višina: 2.200 mm, zahteva za prostor dolžina: 3.550 mm, potrebna širina: 2.000 mm, nastavitev višine mize: 500 mm, Oprema: dokumentacija / priročnik, Wide Belt Grinding Machine MS92-150, 3-roller redirected belt 150x7100 For manual grinding, satin finishing, and polishing. Suitable for processing steel, stainless steel, and brass. Scope of delivery includes: - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking adjustment - Grinding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Initial equipment sanding belt - Operating manual + manufacturer's declaration - CE version The robust machine frame is a welded steel construction ensuring exceptionally stable and low-vibration operation. Both machine stands feature an offset design, allowing processing of parts longer than the machine table itself. The grinding belt is guided over three deflection rollers, providing the operator with the largest possible, open working area—ideal for working with hand sanding blocks. Belt drive is provided by a three-phase motor with a dynamically balanced drive roller. The belt features adjustable pneumatic tensioning. The dust extraction unit is dimensioned to efficiently capture sanding dust and direct it to the extraction nozzle, provided it is connected to a suitable extraction system. For effortless operation, the grinding unit is mounted in play-free linear guides. The machine table can be easily and quickly adjusted to the required workpiece height using the electric lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be slid under the sanding belt during setup. The main electrical controls are user-friendly and centrally located on the machine. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Control cabinets and small housings in "light grey" The machine comes standard with an initial equipment belt (WxL) 150 x 7100 mm and a contact roller, approx. 50° Shore hardness for 150 mm belt width. Additional accessories: Pgjdpjtwb U Aefx Altop 3-axis table with integrated handling device for turning and swiveling workpieces. The handling device is centrally mounted under the table’s insert frame. To operate the handling device, the insert frame is removed from the machine table. The device is equipped with four vacuum suction cups for securing the workpieces and consists of: a bearing with rotary axis (with a brake disc on the rear side), and a swivel device affixed to the front of the axis. The swivel can be locked at 0°, 22.5°, 45°, 67.5°, and 90°. An additional detent disk on the swivel head allows fine adjustment of workpieces relative to the grinding belt. The rotary and swivel axes are pneumatically unlocked via foot switch, axis movement is manual. Maximum workpiece weight when used as a flat table with insert frame: 80 daN. Maximum workpiece weight when using the handling device (relative to the clamping plate): 25 daN or 120 Nm relative to the rotary axis center.