Dvojni vijačni ekstruder

Weber DS 7.22

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1995, obratovalne ure: 39.000 h, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, A used and fully operational profile extrusion line, consisting of: Twin-screw extruder (parallel) Manufacturer: WEBER Model: DS 7.22 Year of manufacture: 1995 Machine No.: DS70-043 Operating hours: 39,000 h Screw diameter: 70 mm Effective screw length: 22 x D Screw geometry: for rigid PVC profiles Torque: 4,500 Nm per screw Screw speed: max. 40 rpm, infinitely adjustable Drive motor: DC low-voltage motor, thyristor-controlled Drive power: approx. 25 kW Barrel heating/cooling zones: 5/3 (air cooling via fan) Adapter heating zone: 1 Tool heating zones: 5 Control: conventional with digital temperature controllers Degassing: Rotary vane vacuum pump Busch (1.5 kW) Max. output: 120-150 kg/h for rigid PVC, depending on material Connected load: approx. 50 kW (without tooling) Special accessories: melt temperature probe and melt pressure sensor Adapter between extruder connection and extrusion die Used tooling set for a window profile (widening), consisting of: - Extrusion die for “widening”, incl. heating bands - Dry calibration unit - Vacuum tank approx. 2 m long, with 8 inserts for calibration disks - 16 calibration disks Vacuum calibration unit Manufacturer: Uniplast / Greiner Model: CAL VAK 4P Year of manufacture: 1992 Machine No.: K9209590 Ihedpfx Ajxu U Trsf Tet Total length: 6500 mm Vacuum pumps: 4 x Speck vacuum pumps (each 4.3 kW) Water circulation pumps: 2 x Calpeda (each 1.1 kW) Caterpillar haul-off with integrated saw Manufacturer: Uniplast / Greiner Model: CAT PUL 2D Year of manufacture: 1992 Machine No.: R 9204546 Haul-off: Effective contact length: 2000 mm Pad width: 250 mm Max. haul-off force: approx. 25,000 N Speed range: up to approx. 10 m/min Profile saw: TCT circular saw blade: Ø 450 mm Max. profile cross-section: approx. 300 x 100 mm Tilting table Manufacturer: Ide Model: ME N 52/2 Year of manufacture: 1994 Length: 6000 mm Support width: 270 mm Note: The entire line was overhauled in 2020 and has only been in operation for 325 hours since then.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 3.04-00054, Oprema: Na voljo je tipska ploščica, Rabljeni ekstruder Bellaform, tip: BH45-30D, letnik 2013 s polžem mere 45 mm - 30 l/d, hitrost vrtenja polža pribl. 160 obr/min z vodno hlajenim servomotorjem 30 kW, z menjalnikom cilinder s 4 ogrevalno/hladilnimi conami in vodno pušo v območju dovoda materialni lijak plus dozirni polž COLORTRONIC za masterbatch Ihsdpsuxa Abefx Af Tot en senzor tlaka taline krmilna omara integrirana v ogrodje stroja, s povsem novim PLC in z novim zaslonom na dotik za enostavno in intuitivno upravljanje ta ekstruder je bil funkcionalno preizkušen! Dimenzije: pribl. 195 x 70 x 200 cm (D x Š x V z lijakom)

Stanje: rabljeno, številka stroja/vozila: 11666, Rotor diameter: 280 mm Ihodsghgq Njpfx Af Tjt Rotor width: 300 mm 3-blade rotor 2 rows of stator knives Feed opening approx. 300 x 280 mm Drive motor 11 kW With soundproof enclosure, soundproof hopper, and extraction fan

Leto izdelave: 2000, Stanje: rabljeno, Speed: 227 rpm, Power: 31 kW, Heating capacity: 7.8 kW, Length: 1952 mm, Width: 840 mm, Height: 1920 mm, Weight: 820 kg. Iododuyyzopfx Af Tsht

Stanje: dober (rabljeno), WEBER pipe extrusion line including: WEBER DS 8.5 Iedpfx Aovryhyof Tsht Elmepla saw Battenfeld R200/6 Battenfeld V125

Leto izdelave: 1993, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, used REIFENHÄUSER single-screw extruder with screw size: diameter 50 mm x 30 L/D with grooved feed section and degassing zone type RH 241-1-50-30v with DC drive 30.2 kW Ihedpfx Aopy Eygef Tet year of manufacture 1993 with installed control cabinet fully functional

Stanje: novo, Leto izdelave: 2025, This SGR-1250 model features removable upper and lower segmented bars, and the bending beam is also divided into segments. Additionally, a foot pedal is installed to open the upper bending beam. - Segmented upper and lower clamping bars increase the range of applications - Pedal lock releases your hands, allowing free positioning of the sheet - Universal bending brake for use in repair and body shops - Compact design, modern appearance - Manual folding machine for standard tasks - Segmented upper beam increases bending flexibility Ihodpjc Swkhsfx Af Tjt Technical data: - Max. working width: 1250 mm - Max. bending angle: 160 degrees - Max. sheet thickness (steel): 1.5 mm - Weight: 255 kg - Segment widths: 30, 40, 50, 60, 70 and 100 mm - All three beams equipped with segmented jaw bars (fully segmented) - Stop for pre-set bending angles - Degree scale Price: €5,400 Swivel castors included Delivery: every week Cash on delivery Delivery costs: €180 throughout Germany We look forward to hearing from you!

Stanje: pripravljen za uporabo (rabljen), Number of knives: 6, rotor diameter: 350 mm, motor power: 50 kW, with design as reinforced steel/welded construction and documentation. Inspection is possible. Year of manufacture unknown, comprehensively overhauled in 2022. Ijdpfx Ajn Tpmujf Teht

Leto izdelave: 2005, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel twin-screw extruder WEBER DS 8.5 - Manufacturer: WEBER - Model: DS 8.5 - Year of manufacture: 2005 - Twin parallel screws, diameter 85 mm, 17 L/D Isdpfx Afouziyhe Teht - 5 heating zones on the barrel + 2 cooling zones - 5 die heating zones - Motor power: 56 kW - Up to 150 kg/h profile – 230 kg/h pipes Very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Single-Screw Extruder Battenfeld BEX 1-75-30:B with Co-Extruder BEX 1-35-30:B Application: PE, PP Year of manufacture: 2006 Screw diameter: 75 mm Drive: Baumüller 171 kW RPM: 2,450 Combined output: approx. 850 kg/h In 2014, the extruder was retrofitted by Battenfeld with a frequency drive – new three-phase motor without carbon brushes and frequency inverter Gearbox overhauled in July 2024 Condition: the extruder is in very good condition Ihjdpfx Aeug Edksf Tot Last application: PE pipes Battenfeld Co-Extruder BEX 1-35-30:D Application: PE pipes Connected load: 69 kVA Output: approx. 110 kg/h Year of manufacture: 2010 Condition: the extruder is in very good condition The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr. 6 Germany