Masni spektrometerWaters
nanoACQUITY UPLCTM G2-S Q-TOF
Masni spektrometer
Waters
nanoACQUITY UPLCTM G2-S Q-TOF
Stalna cena brez DDV
28.000 €
Stanje
Rabljeno
Lokacija
Borken 

Prikaži slike
Prikaži karto
Podatki o stroju
Cena in lokacija
Stalna cena brez DDV
28.000 €
- Lokacija:
- Einsteinstraße 8a, 46325 Borken, DE
Klic
Podrobnosti ponudbe
- ID ponudbe:
- A17902976
- Št. reference:
- 24455
- Nazadnje posodobljeno:
- dne 04.12.2024
Opis
HPLC Waters
The system consists of the following modules and components:
HPLC Waters Binary Solvent Manager
HPLC Waters Auxiliary Solvent Manager
HPLC Waters HDX Manager
HPLC Waters PAL System
HPLC Waters Leap
Synapt HDMS Mass Spectrometer
HPLC Waters Binary Solvent Manager
Flow Control Modules
Flow rate from 0.20 to 5.00 µl/min
Solvents are mixed in the T-piece outlet of the flow control module.
Auxiliary Solvent Manager
Flow rates from 0.10 to 5.00 µl/min
Flow Control Module
Flow from 0.20 to 5.00 µl/min
Sample Manager
The sample manager injects samples drawn from microtiter plates or vials into the chromatographic flow path.
In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or in less than 60 seconds, including a double standard wash.
The sample manager accepts plates with a standard footprint, 5.03 $0.02 in x 3.365 $0.02 in, compliant with SBS/ANSI plates (maximum height of 2.2 in, including lids).
The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or lower.
Heater and Capture Module
Inner diameter up to 300 micrometers and a length of 250 mm
Temperatures from 5 °C (9 °F) above ambient up to 65 °C (149 °F).
The column base can be pivoted outwards to any position between 0° and 180°.
In the 0° position “Home”, the column base is directly above the sample manager and can be connected to an optional optical detector.
In the 180° position “away”, the analytical column can be connected to a mass spectrometer (on the right side of the system).
The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation.
Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used solely for peptide identification (LC-MSE data-independent acquisition), as well as for denaturing and native MS analysis.
Documents & Downloads
Guodpfxovcnpae Ah Dsh
Data sheet: Operating Manual
Condition: used
Scope of supply: (see image)
(Changes and errors in the technical data, information subject to change!)
For further questions, we will be happy to assist you by phone.
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
The system consists of the following modules and components:
HPLC Waters Binary Solvent Manager
HPLC Waters Auxiliary Solvent Manager
HPLC Waters HDX Manager
HPLC Waters PAL System
HPLC Waters Leap
Synapt HDMS Mass Spectrometer
HPLC Waters Binary Solvent Manager
Flow Control Modules
Flow rate from 0.20 to 5.00 µl/min
Solvents are mixed in the T-piece outlet of the flow control module.
Auxiliary Solvent Manager
Flow rates from 0.10 to 5.00 µl/min
Flow Control Module
Flow from 0.20 to 5.00 µl/min
Sample Manager
The sample manager injects samples drawn from microtiter plates or vials into the chromatographic flow path.
In maximum throughput mode, the sample manager can perform an injection in approximately 45 seconds, including a single standard wash, or in less than 60 seconds, including a double standard wash.
The sample manager accepts plates with a standard footprint, 5.03 $0.02 in x 3.365 $0.02 in, compliant with SBS/ANSI plates (maximum height of 2.2 in, including lids).
The sample manager can store samples at any temperature between 4 and 40 °C (39 and 104 °F) under ambient conditions of 25 °C (77 °F) or lower.
Heater and Capture Module
Inner diameter up to 300 micrometers and a length of 250 mm
Temperatures from 5 °C (9 °F) above ambient up to 65 °C (149 °F).
The column base can be pivoted outwards to any position between 0° and 180°.
In the 0° position “Home”, the column base is directly above the sample manager and can be connected to an optional optical detector.
In the 180° position “away”, the analytical column can be connected to a mass spectrometer (on the right side of the system).
The Synapt G2 is a Q-TOF-based mass spectrometer with an additional ion mobility cell, which enables orthogonal separation of ions based on their shape and conformation.
Equipped with an intermediate quadrupole (8k), this highly versatile instrument can be used solely for peptide identification (LC-MSE data-independent acquisition), as well as for denaturing and native MS analysis.
Documents & Downloads
Guodpfxovcnpae Ah Dsh
Data sheet: Operating Manual
Condition: used
Scope of supply: (see image)
(Changes and errors in the technical data, information subject to change!)
For further questions, we will be happy to assist you by phone.
Oglas je bil preveden samodejno, zaradi česar je morda prišlo do napak pri prevodu.
Ponudnik
Opomba: Brezplačno se registrirajte ali prijavite, za dostop do vseh informacij.
Pošlji zahtevo
Telefon & Faks
+49 2861 ... oglasi
Vaš oglas je bil uspešno izbrisan
Prišlo je do napake