Stroj za brušenje profilov

Wasino GLS-5T

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance Gisdpfxeul Efmj Afqol requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Gsdpfxovuuaio Afqsil Die opening in table 450 mm Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Table height above floor: 800 mm Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Gijdpjvut Ncjfx Afqel Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. The machine can be inspected under power at our warehouse.

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2017, obratovalne ure: 2.600 h, vrsta upravljanja: CNC krmiljenje, model krmilnika: Fanuc 32 C, Oprema: dokumentacija / priročnik, Standard programs such as parameter adjustment Dressing settings Speed settings Program management settings Limitation of X + Y travel distances Basic parameter settings Grinding wheel management program Warm-up cycle program Flat plunge grinding program Measuring program Transformer 15 kVA Full enclosure Meister G3 Spindle upgrade to 3.7 kW, wheel 225 ETHER interface for network connection Control module with extended memory Fanuc Macro B option Batch program creation Programmable spindle speed WinWop contour creation program for Windows WINWop error compensation program WinWop post-processor CGS Complete Grinding Solutions software Option: Dressing Swiveling profile dressing device Diamond dressing wheel Pre-dressing device VPA 100 L 100 mm diamond wheel for pre-dressing device Diamond grade resharpening package G3 / W Option – Clamping and Balancing Godpfjw I Tt Ssx Afqsil Magnetic chuck 400 x 200 400 mm stop bar with prism Fully automatic balancing device size 1 Grinding wheel flange for G3, bore 51 Option: Filtration systems Band filter unit 175 l Emulsion mist extraction unit 500 Inquiries only from Europe – preferably EU

Stanje: rabljeno, Leto izdelave: 2008, Technical details: X-axis travel: 800 mm Gjdpfx Afemmqivsqoil Y-axis travel: 840 mm Z-axis travel: 865 mm Total power requirement: 24 kW Machine weight approx.: 15.5 t Space requirement approx.: 4 x 3 m 5 axes, 1 spindle A axis: -30° to +210° B axis: 360° x 0.001° Axis speeds: X = 65 mm/min; Y = 55 mm/min; Z = 60 mm/min Spindle power: 29 kW Max. spindle speed: 1,200 rpm Max. torque: 34.6 Nm Tools: HSK-A63 87 tool pockets in the magazine

Stanje: rabljeno, Leto izdelave: 1985, Pritisk 80 t Izbočina 345 mm Hod 20 - 160 mm Broj hodova 65 /min Razdaljina stol/klip, veliki hod gore, podešavanje gore 495 mm Giedpfevuug Nsx Afqel Površina stola 920 x 610 mm Visina stola iznad poda 800 mm Otvori za prolaz na stolu 280 mm Prolaz između bočnih zidova tela 670 mm Površina klipa 650 x 400 mm Podešavanje klipa 50 mm Snaga pogona 10,0 kW Težina 7,7 t Dimenzije (ŠxDxV) 1,5 x 2,2 x 3,15 m Odobreno za ručno umetanje prema nemačkim propisima o sprečavanju nezgoda (UVV) sa motorom, pneumatskom spojkom, hidrauličkom sigurnošću od preopterećenja u klipu, ručnim podešavanjem hoda, motornim podešavanjem klipa, motornim centralnim podmazivanjem, dvostrukom ručnom kontrolom Presa je trenutno u mehaničkoj i elektro remontu - video je snimljen pre početka remonta SA delimičnim mehaničkim remontom, SA novom Pilz upravljačkom jedinicom

Leto izdelave: 2005, obratovalne ure: 22.640 h, Stanje: pripravljen za uporabo (rabljen), Krmilna enota Znamka: FANUC Model: 21i-TB Ta 4-osna valjčna brusilka STUDER S33 je bila izdelana leta 2005. Opremljena je z enoto za dinamično uravnoteženje, vstavkom z gumbom Marposs in vključuje 2 CBN brusna diska. Stroj vsebuje tudi približno 20 notranjih brusilnih trnov in 3 vpenjalne tule. Izkoristite priložnost za nakup valjčne brusilke STUDER S33. Kontaktirajte nas za več informacij o tem stroju. Gjdjx D D E Aspfx Afqjil Vrste uporabe Brušenje

Leto izdelave: 2004, Stanje: rabljeno, z-axis travel 200 mm Max. clamping diameter for cutter heads 550 mm Max. permissible cutter head weight 150 kg Mounting plate diameter for cutter heads 360 mm Mounting taper nominal diameter for cutter heads 500 mm Gedpfx Afsvq Sd Rjqjil Machine weight approx. 2.3 t Required space approx. 2 x 1.5 x 2.03 m Cutter Head Setting and Measuring Machine In the production process of spiral bevel gears, the quality of the gear cutting tools used plays a decisive role. Especially in dry milling, a high gear quality and long tool life can only be achieved with precisely adjusted cutter heads. The CS 200 cutter head setting and inspection device enables quick and easy adjustment of the individual cutters, checks their positions, and documents the measurement results. The measuring cycle on the CNC-controlled inspection device is semi-automated: process steps are displayed to the operator on the screen for guided handling. The positioning of the individual cutters in the cutter head, as well as the height location of the cutter tips, is handled largely automatically via a special procedure and is simultaneously documented through a concentricity diagram. A subsequent measuring cycle checks the radial positions of all inner and outer cutting edges in the cutter head. If individual inspection parameters do not meet the specified tolerances, they can be individually re-adjusted. Thanks to the combination of a semi-automated setting process, operator-guided setup actions, and automatic measuring cycle, cutter heads can be conveniently, quickly, and with high precision. Operator-Guided Setting and Inspection Process - Graphical representation of cutter head configuration and measurement results with tolerance verification - Operator instructions in plain text (no coded information) - Easy assignment of measurement results to the respective cutters - Documentation of setting and measurement results via printer - Setting and inspection process suitable for stick blade cutter heads of the types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2008, Force de pressage nominale : 800 kN Course du coulisseau, réglable par paliers : 30…120 mm Réglage du coulisseau : 100 mm Profondeur de col de cygne : 300 mm Nombre de courses à vide : 70 /min Nombre de courses réglable en continu : 40–130 /min Hauteur d’outillage pour course maxi Gisdpfx Afew Ec A Esqol bas et réglage en haut : 400 mm* Surface de bridage de la table (LxP) : 1 200 x 600 mm Surface de bridage du coulisseau (LxP) : 600 x 450 mm Alésage de broche dans le coulisseau : 50 H7 mm Puissance du moteur principal : 7,5 kW Hauteur de la machine env. : 3 250 mm Poids de la machine : 7 500 kg - Avec protection hydraulique contre les surcharges, réglage automatique du coulisseau, réglage semi-automatique de la course, dernière norme UVV - Avec commande Siemens S7/300 avec écran tactile sur pupitre mobile - Commande bimanuelle, porte à course protégée par fin de course - Rainure de centrage - Avance à rouleaux : Servo 300 (largeur de bande 300 mm, épaisseur de bande 4 mm, section : 1 000 mm²) - Rails à rouleaux bloc - Patins anti-vibrations

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, Oprema: dokumentacija / priročnik, TECHNICAL SPECIFICATIONS: Press Model: T160 CNR6 Serial number: 160/0/46/00 Year of manufacture: 2000 Nominal force: 1600 kN Mass: 13,800 kg Nominal stroke rate: 55 spm Min./max. strokes per minute: 10/55 spm Max. insertions per minute: 17 spm Clutch pressure min./max.: 4.0–5.5 bar Max. stopping time: 0.22 s Safety distance: 355 mm Energy (at 15% nominal strokes): 14,500 kJ Ram stroke min./max.: 10/200 mm Ram adjustment: 110 mm Upper dead center (adjusted high): 430 mm Maximum ejection stroke: 60 mm Bed size (H x D x W): 78/750/1250 mm Ram size (D x W): 600/850 mm Shank diameter: 60 mm Throat depth: 370 mm Max. die size: 600/850 mm Max. die head weight: 344 daN Operating air pressure: 5.5–6 bar Stop position: TDC (Top Dead Center) Voltage: 380 V Frequency: 50 Hz Auxiliary voltage: 24 V NEWLY INSTALLED COMPONENTS: • Safety guards with safety locks; • Clutch friction discs; Giodpfx Aowaiw Ssfqjl • Clutch pins and bushings; • Flywheel bearings; • Flywheel oil seals; • Stroke change nosepiece; • Balancer cylinder seal kits; • Air pressure gauges; • Electrical control panel; • Inverter (speed variator); • Motor; • Motor pulley; • Refurbished work table (CNC machined) Supplied with six (6) months warranty, technical documentation and CE compliance certification. Electrical panel warranty twelve (12) months.