Kombi z visokim stropom

VW Crafter + Sponda Idraulica

Stanje: kot nova (razstavni stroj), Used/refurbished hoist motor for a DH wire rope hoist ATTENTION! We have more than 15,000 Demag parts in stock. For further information, please visit our website or see our other listings. Lajdpfx Ash Up U Dsl Nja

Stanje: kot nova (razstavni stroj), For sale Demag wheel blocks Laedpfjh Uqibox Al Nea ATTENTION! We have more than 15,000 Demag parts in stock For further information, please visit our website or see our other listings.

Stanje: novo, JAN REILING BV has an extensive inventory with over 15,000 different DEMAG parts, ranging from nuts to complete cranes. In addition to new parts, we also supply used parts, hoists, and cranes. Our refurbished hoists, cranes, parts, and drives are available in fully overhauled condition from our warehouse. JAN REILING BV delivers exactly what you're looking for without delay. JAN REILING BV has built up an extensive supplier network across Europe. In addition to DEMAG, we can quickly and cost-effectively supply you with parts for all other brands as well. Lsdpoh Upx Ijfx Al Nsaa We offer a wide range of new Demag parts from stock, including: rope guides, hoist ropes, brake linings, rope pulleys, hoist motors, trolley motors, fine lift motors, bottom blocks, load hooks, travel wheels, pinions, radio controls, bottom hooks, cable drums, trolleys, motors, travel motors, ropes, chains, and more. KBH KBF KBS KBA KBU 13/3PF 13/6PF 13/3KF 13/6KF 16/6KF 16/8KF 52D 52DF 62D 62DF 63D 63DF 72D AFW D04 D05 D06 D08 ZBA ZBF ZBR DH P100 P625 P632 P425 P408 P412 P00DH P10 P1250 P1201 DMR DR DC PK DK Contact us to discuss the available options. We supply both new and used equipment.

Stanje: rabljeno, Dvotirni mostni žerjav 50T DEMAG Laedpfxoxfh I De Al Noa Proizvajalec DEMAG Tip Dvotirni mostni žerjav Industrijske uporabe Težka dvigovanja v panogah, kot so jeklarska industrija, ladjedelništvo, težka industrijska delavnica, logistična središča ali pristaniške inštalacije. Glavne tehnične specifikacije - Nosilnost: 50 ton - Razpon: 28 metrov - Konstrukcija: Dvotirna - Proizvajalec dvižnega sistema: DEMAG - Namestitev: montaža na tirnice ali nosilce - Upravljanje: radijsko daljinsko vodenje ali upravljalska kabina, odvisno od instalacije - Uporaba: notranja ali zunanja, glede na izvedbo - Ojačano ogrodje za ekstremne obremenitve 🧩 Uporaba stroja Dvotirni mostni žerjav DEMAG 50T je zasnovan za težka dvigovanja v zelo zahtevnih industrijskih okoljih. Razpon 28 metrov omogoča varno in natančno manipulacijo z velikimi in težkimi tovori ter izboljšuje delovne tokove v proizvodnji, vzdrževanju ali skladiščih. ⚙️ Lastnosti / prednosti Ta model izstopa po izjemni nosilnosti 50 ton, 28-metrskem razponu, ojačani dvotirni konstrukciji ter napredni DEMAG tehnologiji dviganja, ki zagotavlja robustnost, zanesljivost in stabilnost za ekstremno zahtevne aplikacije. Idealna izbira za obrate, ki zahtevajo kontinuirano visoko zmogljivost.

Leto izdelave: 2008, stanje: rabljeno, številka stroja/vozila: 820505-01+02, Ref. No. 24208 + 24209 2 units – Load Turning Devices Technical Specifications: - Load capacity per ROTOMAX: 25 t - Maximum torque: 14,000 Nm - Rotation speed: 2.6 m/min - Operation via hand-held remote control with intermediate cable - Intermediate cable length: approx. 8 m Lodpfx Aljtpbwhs Noaa - Load turning belt width: 160 mm - Pin diameter for fixture: 140 mm - Power supply per unit: 400 V / 3.0 kW - Space requirement per unit: approx. W 2200 x H 1300 x D 900 mm - Own weight per unit: approx. 2,100 kg

Stanje: rabljeno, Double-girder overhead travelling crane, bridge crane KONECRANES Type XLD 32 t Serial No. 18 / 4363310 Year of manufacture: 2002 Lifting capacity: 32 tons Span: 5,750 mm Lifting height: max. 12.5 meters Girder height: 560 mm (2 crane bridge girders) Crane travel speed: 20 m/min, stepless via frequency inverter Trolley travel speed: 16 m/min, stepless via frequency inverter Hoisting unit with double girder trolley KONECRANES Type XL516N40HDC424B0EE (XL500) Serial no. (hoist): C00204, year of manufacture: 2002 Crane classification: DIN 15011 (FEM 1.001) "M4" "1am" Load capacity: 32 tons Hook path: max. 12.5 meters Main lifting speed: 2.5 m/min Creep lifting speed: 0.42 m/min Trolley gauge: 2,400 mm - Trolley with double girder design - With REMOX radio remote control (frequency 434.675 MHz) - Double load hook (twin hook) - Complete cable drag chain for power supply - Electrical control cabinet mounted on the crane bridge - Very few operating hours Hoisting motor power (main hoist): 18 kW Hoisting motor power (auxiliary hoist): 3 kW Power supply: 400 V, 50 Hz Ledpfx Alox Edq Is Njaa Required transport space (L x W x H): 6,000 x 2,450 x 2,800 mm Total weight: approx. 5,000 kg In very good condition

Stanje: dober (rabljeno), Leto izdelave: 1995, Dimenzije D-Š-V: 3,50/2,40/2,20 mm Teža stroja cca 3500 kg Ledpfx Alow N S Eco Njaa Proizvajalec: KASTO Tip: HBA 420 AU Letnik proizvodnje: 1995 Pol-avtomatska NC horizontalna tračna žaga s hidravlično vpenjalno napravo do 400 mm, 1 transportni trak za odrezke, 1 zunanji transportni trak za odrezke, 1 valjčna proga, 1 valjčna proga, hidravlični pogon, motor izklopljen, Mere (širina x višina x globina): cca 400x200x350 cm

Leto izdelave: 1998, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 12254 B521 860, overhead crane ± 10,500 mm x 12,500 kg Lajdpfx Asv Ip Egel Nja

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Funkcionalnost: popolnoma funkcionalen, vhodna napetost: 400 V, lastna masa: 6.000 kg, moč hladilne črpalke: 180 W, dolžina tračnega lista: 7.600 mm, širina tračne žage: 50 mm, AMADA HFA 700 CNC – Fully Automatic Heavy-Duty CNC Bandsaw Metalworking | Series Production | AMADA Japan The AMADA HFA 700 CNC is a fully automatic, horizontal CNC bandsaw designed for metalworking, tailored for heavy industrial applications and high-volume production. Its robust construction with a machine weight of 6,000 kg, combined with proven AMADA technology, ensures stable, precise, and repeatable cutting results. Key Advantages: ● Fully automatic CNC bandsaw for metal ● AMADA – industrial quality ● Heavy-duty construction, machine weight 6,000 kg ● Rigid machine frame for vibration minimization ● Saw motor 7.5 kW ● Hydraulic blade tensioning ● Industrial grade saw blade 7,600 × 50 × 1.6 mm ● Modern CNC control with automatic cut cycles ● Ideal for series and continuous operation ● Suitable for solid material, profiles, and material bundles Technical Data ● Control unit: CNC ● Saw motor power: 7.5 kW ● Hydraulic motor: 2.2 kW ● Coolant pump: 180 W ● Wire brush: 200 W ● Saw blade dimensions: 7,600 × 50 × 1.6 mm ● Blade tensioning: hydraulic ● Power supply: 400 V / 50 Hz ● Connected load: 14 kVA ● Machine weight: approx. 6,000 kg Laodpfx Aljyc H H Uo Nsa Condition: used, fully functional, ready for operation 📩 Contact us for pricing and further technical information.

Stanje: rabljeno, Load capacity 80 t Span / mm Length 9300 mm Height 3500 mm Torque 95000 Nm Lasdpfjhtv Tyex Al Nja Total power requirement 15 kW Machine weight approx. / t Space requirement approx. / m Incl. radio remote control TÜV inspected until 09/2022