Tovorna dvigalka na tovornjaku

VOLVO FM 380 Kipper 6,20 m * PK 12000 * FUNK*6x4

Leto izdelave: 2003, Stanje: rabljeno, Pressure: 100 t Hnsdpjra Rr Eefx Af Teg Stroke: 10–130 mm Strokes per minute: 30–90 spm Throat depth: 330 mm Ram adjustment: 100 mm Table area: 950 x 660 mm Ram area: 540 x 440 mm Through-hole in table: Ø 230 mm Table height: 1000 mm Pin hole in ram: Ø 50 mm Total power requirement: 7.5 kW Machine weight approx. 7 t Pneumatic clutch-brake combination Beutler Datatech press control Centralized oil lubrication Hydraulic overload protection in ram Manual stroke adjustment Manual ram adjustment Two-hand operation Foot operation GSW feed straightener VRMA 40/78, year of manufacture 2003 Feed control HDS 50 BSA decoiler NO20/400V-AP

Stanje: rabljeno, Leto izdelave: 2003, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 25 - 140 Throat depth: 460 mm Clear space between frame walls: 590 mm Shut height: 690 mm Hnedjvuun Tspfx Af Tsg Table size: 1500 x 880 mm Slotted opening in table: 950 x 250 mm Table height above floor: 900 mm Ram area: 870 x 725 mm Ram adjustment: 120 mm Drive power: 30.0 kW Weight: 32.0 t Space requirement: approx. 2.34 x 2.38 x 3.99 m (L x W x H) Approved for manual loading/unloading and automatic operation according to CE guidelines With steplessly adjustable drive, light barrier (manufacturer: Sick), hydraulic clutch/brake combination, hydraulic overload protection in the ram, automatic stroke adjustment, motorized ram adjustment, pneumatic ram counterbalance, fixed table, pneumatic die cushion in table (20 t), automatic central lubrication, control panel with two-hand operation Clear distance between tie rods: 940 mm Lateral pass-through: 900 mm

Stanje: rabljeno, prevoženi kilometri: 663.035 km, moč: 368 kW (500,34 KM), prva registracija: 02/2012, skupna masa: 26.000 kg, gorivo: dizel, Leto izdelave: 2012,

Obratovalne ure: 12.000 h, Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Blanking line with Raster press, consisting of: 1) Dimeco Alipresse decoiler, type 2330DF, equipped with an SV tracking and speed variation system. 2) Dimeco Alipresse powered straightener, type 1645, with SV tracking and speed variation system. 3) Raster eccentric press, type HR 60 SL-4 S, with soundproof enclosure. Specifications available in the photos. Hnedperyu Tasfx Af Tsg 4) Documentation.

Stanje: rabljeno, Leto izdelave: 2007, Pressing force: 63 t Stroke: 8 - 120 mm Strokes per minute: 40 - 120 Throat depth: 280 mm Clearance between frame walls: 325 mm Hjdpfowc U Inex Af Tong Daylight opening: 440 mm Table size: 820 x 580 mm Through-hole in table: 200 mm Table height above floor: 830 mm Ram area: 470 x 340 mm Ram adjustment: 100 mm Drive power: 4.0 kW Weight: 5.2 t Space requirements (W x D x H): 1.3 x 1.8 x 2.8 m Approved for manual loading operations according to CE standards with infinitely variable drive, pneumatic clutch/brake combination, light curtain (Sick), hydraulic overload protection, pneumatic ram weight balancing, manual stroke adjustment, manual ram adjustment, central lubrication, fixed table, two-hand and foot operation

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1999, TECHNICAL SPECIFICATIONS: Press Model: T50 CNR4 Year of manufacture: 1999 Nominal force: 500 kN Weight: 3,500 kg Strokes per minute: 90 Max insertions per minute: 41 Operating air pressure min./max.: 4–5.5 BAR Stop time: 0.117 s Safety distance: 187 mm Energy: 2000 KJ Adjustable stroke min./max.: 8–100 mm Ram adjustment: 70 mm Hjdpfx Afjqbtc Ne Tjng Upper dead center (high adjustment): 280 mm Maximum extraction stroke: 30 mm Worktable surface: 770x530x58 mm Ram table dimensions: 450x300 mm Shank diameter: 45 mm Clearance from center: 270 mm Max. die size: 450x300 mm Upper die weight: 84 kg Voltage: 400 V Complete with operating manual and CE conformity Six (6) months warranty excluding electronic parts NEW COMPONENTS INSTALLED: • Motor bearings • Flywheel bearings • Motor belts • Clutch plates • Front safety guards • Worktable refurbished on CNC machine • Pedal control

Stanje: rabljeno, Leto izdelave: 1972, številka stroja/vozila: 1171, Total pressing force: 160 t Throat depth: 350 mm Ram stroke: 20 - 140 mm Ram adjustment: 75 mm Installation height (stroke down, adjustment up): 740 mm Table clamping surface approx.: 1000 x 680 mm Ram clamping surface approx.: 600 x 300 mm Strokes per minute: 50 min⁻¹ Power requirement: 15 kW Machine weight approx.: 12 t Standard equipment: Machine includes: - Guard HS Decoiler M 15 / 500 - Year of manufacture 2009 Material width: 15 - 500 mm Coil weight: 1.5 t Coil outside diameter: 1400 mm Coil inside diameter: 380 - 530 mm Hjdpouqdwxofx Af Tsng HS Straightening Machine RME 40 - 9 - Year of manufacture 2009 Material thickness: 0.4 - 2 mm Number of feed rollers: 2 pcs Number of straightening rollers: 9 pcs Straightening roller diameter: 61.9 mm Feed roller diameter: 61.9 mm Feed speed: 40 m/min Feed length: 0 - 9999.99 mm Additional equipment: The machine was retrofitted with SIEMENS S7 control in 2009.

Stanje: rabljeno, prevoženi kilometri: 589.000 km, moč: 345 kW (469,07 KM), prva registracija: 04/2014, vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, emisijski razred: Euro 5, Leto izdelave: 2014, Oprema: ABS, elektronski program stabilnosti (ESP), klimatska naprava, parkirni grelec, žerjav, VOLVO FH 460 GLOBETROTTER FLATBED WITH FASSI CRANE F185BS23 13.30 M LENGTH ----VEHICLE HISTORY: * FROM FIRST OWNER * GERMAN VEHICLE * VIDEO AVAILABLE ON REQUEST CRANE SPECIFICATIONS: * FASSI CRANE * TYPE: F185BS23 * 13.30 M REACH * YEAR OF MANUFACTURE: 2011 VEHICLE EQUIPMENT: * GLOBETROTTER CAB * EURO 5 EEV * AUTOMATIC TRANSMISSION * ENGINE BRAKE * CRUISE CONTROL * LIFT AXLE Hsdou I Igyspfx Af Teng * STATIONARY AIR CONDITIONING * PARKING HEATER * ROOF SPOTLIGHTS * AIR CONDITIONING * DIFFERENTIAL LOCK * HANDS-FREE SYSTEM * REFRIGERATOR * 2 X BED/BUNKS * COMFORT SEATS * SEAT HEATING * SEAT VENTILATION * ELECTRIC WINDOWS * FRONT: LEAF SPRINGS * REAR AXLE: AIR SUSPENSION * TRAILER COUPLING * 1 X FUEL TANK * ADBLUE * PERMISSIBLE GROSS WEIGHT: 26,000 KG * EMPTY WEIGHT: 15,750 KG * PAYLOAD: 10,250 KG * TYRE SIZE: * 1ST & 3RD AXLE: 385 / 65 R 22.5 * 2ND AXLE: 315 / 70 R 22.5 * IMMEDIATELY AVAILABLE * READY FOR IMMEDIATE OPERATION ----EXPORT CUSTOMS DOCUMENTATION EXW IN 10 MIN. (APPROVED EXPORTER) 5, 15, 30 DAY PLATES AND 15 DAY AUSTRIA PLATES EURO 1 TECHNICAL DATA SHEET (DATA TECNICI) VEHICLE RESERVATIONS ONLY VIA THE EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit/guarantee of at least EUR 500.00 / EUR 1,000.00 will be levied. Subject to change, errors, and prior sale! More vehicles can be found on our website. Sales are carried out exclusively according to our General Terms and Conditions – see homepage. Important Notice: Despite careful verification of all details in our offer, errors may occur. These may sometimes be caused by transmission errors in the systems of different platform providers. Therefore, all information is provided without guarantee and does not constitute a legal claim. Legal Note: This sales advertisement does not constitute an offer as defined by §145 BGB. Rather, it is information for the initiation of a contract. The information provided here is without guarantee and does not represent warranted characteristics.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 559, Leto izdelave: 2014, obratovalne ure: 6.263 h, nosilnost: 2.500 kg, dvižna višina: 3.660 mm, vrsta goriva: električni, tip droga: dupleks, gradbena višina: 2.450 mm, napetost baterije: 48 V, širina nosilnega okvirja vilic: 1.150 mm, dolžina vilic: 1.200 mm, stanje pnevmatik: 75 odstotek, lastna masa: 4.480 kg, dvižna moč: 2.500 kg/m, gorivo: elektrika, Oprema: bočni pomik, dodatne luči, objemka, osvetlitev, Immediately deployable machine Linde E25 Mast: duplex freelift. Equipped with Kaup fork positioner and sideshift Front and top window, rear window Integrated battery charger StVZO-compliant full road lighting Hnsdpfx Afstucp Ee Teg Only 6,200 hours. Warranty and inspection upon request

Stanje: novo, prevoženi kilometri: 50 km, moč: 405 kW (550,65 KM), vrsta goriva: dizel, skupna masa: 26.000 kg, konfiguracija osi: 3 osi, barva: bela, vrsta prenosa: samodejen, Oprema: ABS, filter saj, klimatska naprava, navigacijski sistem, parkirni grelec, MX 540 6x2 Chassis CHH-MED, hydraulically steered trailing axle, single wheel configuration Application - For good roads - Distribution transport - Mainly flat topography - Ambient temperature up to +40°C, for more than +40°C max. 25 hrs/year - Ambient temperature down to -25°C, below -25°C max. 25 hrs/year - Center of gravity height (body and load) approx. 0.5 - 1 m above top of frame - Clean roads, up to 10% soiled - Flatbed chassis without preparations - Technical gross train weight: 60 t (observe towing capacity of trailer coupling!) - Chassis for special superstructures - Chassis for crane behind cab - Rearview mirrors for body width of 2600 mm Hnodovywgiepfx Af Tjg Main components - New model - Chassis height: MED (medium), precise heights available from VBI/WIS - Electrohydraulically steered trailing axle, single tire configuration - FMX long-distance safety cab - Wheelbase: 3200 mm - Emissions in accordance with Euro 6 Step E, with SCR, particulate filter and EGR - Diesel engine 12.8 l, 551 HP/405 kW, 2,652 Nm - Volvo Engine Brake+ (VEB+) engine brake. Braking power: 510 HP/375 kW (D13K) - Meets ADR braking regulations. - I-Shift AT2612F automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm - Lift axle - Rear axle RSS1370A, simple reduction, 13 t axle load, GTW 70 t - AA tires 315/80R22.5 - Drive axle ratio 3.08 : 1 - Diesel fuel Equipment packages - Driver comfort package - Central locking with remote control on key - Two armrests on driver's seat - Air conditioning with automatic temperature control and solar sensor - Armrests covered with vinyl - Roof hatch and emergency exit, manual opening (tinted glass) - Info & media package with navigation - Radio reception: AM/FM (analog) - USB port Superstructure: - Fifth wheel plate with sliding mechanism, self-lubricating (Jost JSK type), mounted on subframe - Cover for front stabilizer with FASSI logo (engraved/smooth sheet steel) - Reverse camera fully installed. Superstructure: - Completion of all necessary chassis work for crane installation, dismantling and installation of add-on parts, exhaust system, tanks, etc. Modification of the vehicle frame. - All chassis and bodywork comply with the respective chassis manufacturer’s body mounting guidelines and are carried out accordingly in the highest quality. - Complete installation of a special auxiliary frame, designed in-house and manufactured in-house from fine-grained steel, for crane and body. The welded, bolted auxiliary frame guarantees extreme torsional stiffness and perfect vehicle stability. The unique feature is the design of the auxiliary frame. Execution is of the highest quality and painted in chassis color. - Installation/bolting of the crane and main stabilizer beam with the auxiliary frame. Installation of all hydraulic and electrical connections. Installation location: front - Platform body as removable steel/welded construction - Length approx. 330 cm, width approx. 248 cm. - Platform superstructure painted, color shade as per RAL (chassis color) - Removable aluminum side panels (Suer brand), height 600 mm, anodized with access steps, removable “Kinngripp” stanchions. - Standard platform floor with 4 mm welded steel checker plate, painted in RAL (chassis color) - 6 retractable lashing eyes 2000 daN each side, in slotted profile with flexible arrangement. - 4 x lashing brackets for chains 6500 daN (2 front, 2 rear on superstructure) - Solid front wall consisting of welded frame, 4 mm welded steel