Vakumska cisterna

VOLVO FL Electric mit BUCHER CityFlex C40e Kombination

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 3.000 kg, Največja masa rotorja ---3000 kg (6613,87 lb) Najmanjša masa rotorja ---30 kg (66,14 lb) Dsdpfx Aper Dd Avolecg Največji premer rotorja ---1400 mm (55,12 in) Najmanjši premer gredi ---20 mm (0,79 in) Največji premer gredi ---300 mm (11,81 in) Moč motorja ---11 kW (14,75 KM) Pogonska enota (standardno) ---11 kW (14,75 KM) Hitrost uravnoteženja ---0-3000 vrt/min (25 Hz) (nastavljiva navzgor in navzdol) Pogonska enota --- Samo jermen ali gred / jermen + gred Dolžina postelje ---3000 mm (118,11 in)

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), NEUE HERBOLD Granulator Dcedeh Rwc Eopfx Apleg Universal Mill – Heavy-Duty Version - Year of manufacture: 1998 - Constructed from stainless steel - From technical center (machine was used exclusively for testing/demonstration purposes) - Rotor diameter: 300 mm - Working width: 500 mm - 3 rows of knives

Stanje: rabljeno, prevoženi kilometri: 173.900 km, prva registracija: 11/2000, skupna masa: 12.500 kg, vrsta goriva: dizel, barva: oranžna, konfiguracija osi: 2 osi, vrsta prenosa: mehanski, emisijski razred: Euro 3, Leto izdelave: 2000, Oprema: ABS, klimatska naprava, kompresor, pogon na vsa štiri kolesa, spojka prikolice, U 400 Kommunalfahrzeug Winterdienstausrüstung Aufbaustreuer EPOKE, 2,0 m³ Dedpfxji R Ahmj Aplecg

Leto izdelave: 2006, stanje: skoraj kot novo (rabljeno),

Leto izdelave: 1991, stanje: skoraj kot novo (rabljeno), skupna masa: 1.420 kg, največja hitrost vrtenja: 1.485 obr/min, 3 stainless steel spiral volute process pumps 2 x CPK-CM 250-315, year of manufacture 1991 1 x CPKN-C1 250-315, year of manufacture 2011 !!! Price per unit !!! Pumps were operated on a test bench and all have very low operating hours! See pictures!! Flow rate: 1001 m³/h (278 liters/second) Delivery head / Pressure: 18 m / 1.8 bar Pump speed: 1485 rpm NPSH: 5.00 m Shaft seal: Single-acting mechanical seal with flushing water Manufacturer: Burgmann Impeller type: Closed radial impeller Impeller diameter: 324 mm Bearing type: Rolling bearing Lubrication: Oil Oil level monitoring Materials: 1.4408 (AISI 316) Pump casing: 1.4408 (AISI 316) Wear plate: 1.4408 (AISI 316) Pressure cover: 1.4408 (AISI 316) Shaft: Heat-treated steel C45+N Impeller: 1.4408 (AISI 316) Djdpfx Apeqabiaolecg Bearing lantern: Cast iron JL1040 Shaft sleeve: CrNiMo steel Suction nozzle nominal diameter: DN 300 Discharge nozzle nominal diameter: DN 250 Nominal pressure suction side: PN 16 Nominal pressure discharge side: PN 16 Coupling manufacturer: Flender Coupling type: Eupex NH without spacer sleeve Baseplate: Painted cast iron Motor manufacturer: VEM K21R 280S4-Z Efficiency class: IE 0 Motor speed: 1480 rpm Frequency: 50 Hz Rated voltage: 400 / 690 V Rated motor output P2: 75 kW Thermal class: F Motor protection: IP55 Power factor (cos phi): 0.86 Dimensions: Length: 2120 mm Width: 950 mm Height: 1090 mm Weight: 1420 kg

Leto izdelave: 2011, stanje: dober (rabljeno), Offer 24370 Technical Specifications: - JUNGHANS sludge filter press with hydraulic cylinder unit + discharge conveyor Dcedpfx Ast Srkpspljg - Flocculation system - Pumps - Control cabinet with electrical installation - Water collection tray made of aluminum, integrated into the entire container floor - Lighting - 4-door sea container - Required floor space: approx. W 6.0 x H 2.4 x D 2.4 m - Weight: approx. 5,000 kg - Separate conveyor belt, length 8.0 m

Stanje: skoraj kot novo (rabljeno), Manufacturer: V. Randwijks Rotor diameter: 500 mm Rotor width: 700 mm Drive: 22 kW / 1,470 rpm Dsdpog Snt Sjfx Aplecg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, We are offering a top-quality 3D scanner from GOM: GOM ATOS IIe Rev.01 Complete, ready-to-connect system including all cables. Please note: The PC has a password set, but the software is included on CD. Includes various sensor heads: Measuring volumes: - Set 175x140 - Set 350x280 - Set 550x - Set 1000x800 Complete GOM PC in an aluminium case with Linux software, fully ready for operation with GOM ATOS IIe Software included on CD, steel scale bars with ATOS evaluation dongle Dcjdpfxow E I Its Aplog Spare lamp Calibration panel (aluminium) CP20/MV 350x280mm²

Stanje: rabljeno, moč: 210 kW (285,52 KM), prva registracija: 11/2007, vrsta goriva: dizel, konfiguracija osi: 4x4, gorivo: dizel, barva: bela, vrsta prenosa: polavtomatski, število prestav: 8, emisijski razred: Euro 4, Leto izdelave: 2007, Oprema: ABS, električno upravljanje oken, filter saj, klimatska naprava, računalnik na krovu, servovolan, spojka prikolice, = Dodatne možnosti in oprema = - Merilnik vrtljajev - Električna zadnja stekla - Radio/CD predvajalnik - Kamera za vzvratno vožnjo = Dodatne informacije = Dcsdpfx Aovk Nqnopljg Število valjev: 6 Prostornina motorja: 6.374 cc Lastna masa: 8.663 kg Nosilnost: 3.837 kg Skupna dovoljena masa: 12.500 kg Največja priklopna masa: 10.000 kg (nezavirano 750 kg) Notranjost: siva APK (tehnični pregled): Nov TÜV ob dostavi Število ključev: 2

Leto izdelave: 2025, stanje: novo, Funkcionalnost: popolnoma funkcionalen, The universally applicable LAS 28 XLe laser marking system from Systemtechnik Hölzer GmbH can be used for a wide range of marking tasks. The integrated fiber laser allows you to mark nearly all materials, such as steel, carbide, aluminum, and plastics. Depending on your requirements, the system can be equipped with a 20, 30, or 50-watt fiber laser. For permanent marking, the use of a laser has become essential in many industries. The powerful laser software enables you to create texts, numbers, 2D codes, QR codes, and logos with just a few clicks and without extensive programming knowledge. Serial and article numbers can be automatically incremented by the software after initial configuration. Furthermore, the software can retrieve data (variable information such as drawing numbers, project names, etc.) from existing tables and automatically transfer it into predefined fields. The use of a handheld scanner is also possible. The standard equipment includes an integrated PC with Windows operating system and laser software. Optionally, the LAS 28 XLe laser model can be fitted with a rotary axis (three-jaw chuck) for marking cylindrical parts. Additional options, such as side extensions for marking long parts, motorized Z-axis, drawer systems, etc., are available. Made in Germany Fiber laser 30W, 20W or 50W • Laser class 1 • Wavelength 1064nm • Marking field size 150x150mm (optionally larger) • Marking software EZCAD in German/English • Optional: rotary axis (three-jaw chuck) • Optional: digital height measurement system • Optional: autofocus system – automatic focus distance determination • Optional: extraction system (with activated carbon filter) • Pilot laser (simple preview and contour preview) • Focus finder (easy focus adjustment) Dodju Smd Ejpfx Aplocg • Signal tower for operating status display • Max. component height approx. 300mm • Electrically adjustable Z-axis • Integrated PC with Windows operating system • Height-adjustable monitor and keyboard tray • Frame made of aluminum profile • Air-cooled • Door width approx. 700mm / door height (pass-through): 400mm • Connection 230V • Dimensions: approx. 900 x 800 x 1900 mm (LxWxH) • Weight: approx. 120 kg