Dozirna črpalka

Viscotec

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2006, Na voljo je dvanajst dozirnih sistemov z volumetričnimi ekscentričnimi polžastimi črpalkami ViscoTec (Z- in L-verzije) s zbirnim lijakom. Dozirni volumen: 7,5 ml/obrat, zmogljivost pretoka: 75 ml/min–937,5 ml/min, natančnost doziranja: +/-1 %, največje število obratov: 125 obr/min, največji dozirni tlak: 30 bar, največji dovodni tlak: 10 bar. Dokumentacija je na voljo. Ogled na lokaciji je mogoč. Lredpjy S A N Sofx Al Ret

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Lrjdpfx Alovllxds Rot Height: mm Width: mm Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: dober (rabljeno), Tlak 11 bar Prostornina 1500 litrov Lrjdpfx Asg A Hc Hol Ret

Stanje: rabljeno, Hladilna enota, povratni vodni hladilnik, vodni hladilnik, chiller O. Hellwig Leto izdelave: cca 1995 Hladilna zmogljivost: cca 8 kW Nazivna moč hladilne enote: 3 kW Hladilno sredstvo: R422D Prostornina vodnega rezervoarja: cca 35 litrov Pretok obtočne črpalke: 40 litrov/min Moč črpalke: 0,63 kW Vodna priključka: 1/2 palca Priključek na omrežje: 380 voltov, 50 Hz - Nastavitev temperature preko vrtljivega potenciometra Dimenzije (D x Š x V): 1100 x 750 x 140 mm Teža: 285 kg Ledpfxspu R Ncj Al Rort

Leto izdelave: 1990, stanje: dober (rabljeno), Compressor system with air dryer and compressed air tank. Length: 800 mm Lredpsinur Aefx Al Ret Width: 800 mm Height: 1000 mm Flow rate: 1.5 m³/min Power: 11 kW

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units Lrjdpfeiu Smbex Al Rot 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: rabljeno, Charger for Jungheinrich E 220 G 24/65 B-ET-DA forklift Online video inspection possible via Skype video call. We would be delighted to welcome you for a visit – further machines available in stock. Immediately available – can be inspected at any time. Lrodpfx Aloh Axzts Ret Located in Emskirchen / Nuremberg – test runs possible on site.

Stanje: novo, Leto izdelave: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Hanging rod for parts * Convection (uniform temperatures throughout the oven), * Locks for secure door opening and closing, * Maximum operating temperature: 230°C. Powder Coating Booth TQ0906 Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) Lrjdpfx Alsfgnyte Rot SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3,200 m3/h, * Hermetic lamp: 1 pc. * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality machinery offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products have a WE certificate. We offer our own transport – prices are arranged individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions. Please do not hesitate to contact us.

Stanje: novo, Leto izdelave: 2025, Učinkovite hladilne naprave z R290 – zračno hlajene, zanesljive, okolju prijazne. Naši modeli pokrivajo razpon moči od 20 do 800 kW ter nudijo prilagodljive možnosti z ali brez prostega hlajenja. Lodpfx Alefqllws Rort Prednosti: Ekološko hladilno sredstvo R290 z nizkim toplogrednim potencialom Zračno hlajene, z vgrajeno črpalko in rezervoarjem Možnosti: s prostim hlajenjem uporaba zunanjega zraka za dodatno hlajenje, zmanjša porabo električne energije, še posebej v hladnejših mesecih Možnost prilagoditve od 20 do 800 kW glede na vaše potrebe Najsodobnejši nadzor Prilagojeno svetovanje, načrtovanje in dimenzioniranje Dobavni rok glede na izvedbo in opremo Trajnostno upravljanje delovanja z nizkimi emisijami CO2 in nizkimi obratovalnimi stroški Z veseljem vam svetujemo, katera izvedba je optimalna za vaše potrebe.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Oprema: Na voljo je tipska ploščica, Volumetric dosing systems – granules, powders, and regrind Ledpfx Aevmylzjl Rjrt We offer a selection of fully functional volumetric dosing systems, ideally suited for the metering and conveying of granules, powders, and regrind materials. • Various models available: We stock a range of dosing systems that can be adapted to your material and application requirements. • Testing available: Upon request, we will test the dosing equipment with your material to ensure it meets your specifications. • Reliable operation: All units have been tested and are ready for immediate use. Contact us, and we will help you find the right dosing system for your needs. Our team is happy to answer your questions or provide advice!