Dozirna črpalka - higienski dozirnik

Viscotec Hygienic Dispenser 3VHD12

Leto izdelave: 2023, obratovalne ure: 300 h, stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Hygienic dosing pump for precise volumetric dosing of low- to high-viscosity and chunky media. Product-contacting surface Elastomers with FDA compliance declaration Product-contacting parts are autoclavable Easy integration due to compact design Total length approx. 2300mm Nominal width approx. 350mm Total width including motor approx. 500mm Belt top edge adjustable from 980 to 1080mm Base frame made from stable box section profiles Construction in stainless steel, material grade 1.4301 Double-sided knife edge, radius approx. 5mm Food-grade conveyor belt, brand: Habasit, color: white Central drive station Gear motor by SEW included Food-safe coating (subject to delivery time) Speed adjustable via frequency inverter (between 0.8 - 8 m/min) Includes adjustment frame for 5 dispensers by viscotec Adjustment is fundamentally handled via profiles and clamping units Height adjustment is manual via clamping units; all dispensers are set simultaneously. Each dispenser can be finely adjusted individually via elongated holes, if needed. Lateral adjustment for each dispenser is possible, as is tilt and adjustment in or against the conveying direction. Without lateral guides. Nedpfx Ajxcvzaeh Uslb Including engineering Including pre-assembly Including in-house installation of dispensers Including in-house testing Surface: conveyor made from stainless steel 1.4301, round tubes for dispenser frame in stainless steel 1.4301, clamping units made from aluminum. 5 bars are transferred from an existing conveyor system onto our conveyor belt. Control cabinet made of stainless steel 1.4301 Control and frequency inverter by Mitsubishi Electric Setup: Main switch, emergency stop button, automatic on and off buttons Display for setting the speed in m/min and setting the delay time for the start signal for the dispenser Sensors for bar detection (each bar is detected individually) Sensors and signal for dispenser start (each dispenser receives its own start signal) Communication interface with viscotec Emergency stop is currently only for our own machine. Including control cabinet build with 50% reserve capacity Including higher-grade sensors (distance photoelectric sensor, capable of measuring and evaluating distances) Including higher-grade control (hardware and software can be expanded at any time without replacing the control unit) Including HMI (display), approx. 7" size Including E-plan Including software Including in-house testing (interface test with viscotec) Finish: control cabinet completely made of stainless steel, sensors made of stainless steel and FDA-approved.

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), Connected load: 4 kW, weight: 1 t. Nsdpohlp Efjfx Ah Ujlb

Leto izdelave: 2023, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 2VHD12-3D Hygienic Dispenser, Higienska dozirna črpalka za natančno volumsko doziranje medijev od nizke do visoke viskoznosti ter z delci. Površine v stiku z izdelkom. Elastomeri z izjavo o skladnosti FDA. Deli, ki so v stiku z izdelkom, se lahko avtoklavirajo. Preprosta integracija zaradi kompaktne zasnove. Nedpfx Aexcgihsh Uslb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, hladilna zmogljivost: 680 kW (924,54 KM), Oprema: hladilna enota, Condenser Manufacturer: Güntner GVH 090.1.D/5-M(D) Year of manufacture: 2004 Rated capacity: 680.4 / 579.2 kW Refrigerant: R404 Refrigerant charge: 218.9 + 25 liters Flow rate: Temperature range: -50°C to +100°C Maximum pressure: Operating pressure: 28 bar / -1 bar (Capacity depends on usage parameters) Number of fans: 5, diameter 900 mm Air flow rate: 162,500 / 131,000 m³/h Fan motor power consumption: 17.60 / 11.50 kW Heat exchanger area² Operating noise: 52 dB Length: mm Height: mm Width: mm Njdpjvllxdofx Ah Uolb Weight: approx. kg The cooler has been technically inspected and is fully functional.

Stanje: rabljeno, Hladilna enota, povratni vodni hladilnik, vodni hladilnik, chiller O. Hellwig Leto izdelave: cca 1995 Hladilna zmogljivost: cca 8 kW Nazivna moč hladilne enote: 3 kW Hladilno sredstvo: R422D Prostornina vodnega rezervoarja: cca 35 litrov Pretok obtočne črpalke: 40 litrov/min Moč črpalke: 0,63 kW Vodna priključka: 1/2 palca Priključek na omrežje: 380 voltov, 50 Hz - Nastavitev temperature preko vrtljivega potenciometra Dimenzije (D x Š x V): 1100 x 750 x 140 mm Nledpjpu R Ncsfx Ah Ujb Teža: 285 kg

Stanje: dober (rabljeno),

Stanje: novo, Leto izdelave: 2025, TPO0909E Powder Coating Oven Working dimensions (mm): 900 (W) x 900 (D) x 1600 (H) SPECIFICATION: * Power consumption: 9 kW. Equipment: * Hanging rod for parts * Convection (uniform temperatures throughout the oven), * Locks for secure door opening and closing, * Maximum operating temperature: 230°C. Powder Coating Booth TQ0906 Working dimensions (mm): 900 (W) x 600 (D) x 1400 (H) SPECIFICATION: * Power consumption: 1.6 kW * Air capacity: 3,200 m3/h, * Hermetic lamp: 1 pc. Njdpfsfgnytsx Ah Uelb * Automatic filter cleaning system * The booth is equipped with a set of pneumatic quick couplings * Cartridge filter: 1 pc * Powder collection container Oven and booth in stock, ready for shipment. CHOOSE BUMEX SP. Z O.O. Very high quality machinery offered on the market. Professional advice and service. Warranty. Warranty and post-warranty service. Complete technical documentation. 100% customer satisfaction. All BUMEX SP. Z O.O. products have a WE certificate. We offer our own transport – prices are arranged individually for each offer. We issue VAT invoices. Short lead times! Possibility to order machines in various, customized configurations and dimensions. Please do not hesitate to contact us.

Leto izdelave: 1990, stanje: dober (rabljeno), Compressor system with air dryer and compressed air tank. Length: 800 mm Width: 800 mm Nlodpfx Ahsinur As Ujb Height: 1000 mm Flow rate: 1.5 m³/min Power: 11 kW

Stanje: novo, Leto izdelave: 2020, Clamping force 600 kN Clamping plate 460x460 mm Tie bar distance 300x300 mm Clamping stroke 230 mm Ejector stroke 70 mm Ejector force 40 kN Mold height 120-350 mm Tie bar diameter 56 mm Die-casting force 54 kN Die-casting stroke 130 mm Plunger diameter 45, 50, 55 mm Casting volume (DIN 24480) 109, 150, 194 cm³ Specific casting pressure 339, 274, 226 daN/cm² Corresponding parting surface 176, 218, 264 cm² Machine weight approx. 3.5 t Machine Equipment: 1.0.1 Clamping unit cover on machine base 1.0.2 Clamping unit cover on machine base for scale / chute 1.1.0 Motorized safety door on casting side left 1.4.0 Machine mountings 1.5.4 Interior machine lighting 1.11.0 Equipment package – energy efficiency 2.0.1 Ejector value package 2.4.2 Ejector plate lock, mold side 2.6.4 Machine assistance system SensiLock® 2.8.0 Hydraulic adjustment of clamping unit 3.1.1 Nitrogen pressure monitoring for bladder accumulator Njdpfx Aoiu Smbeh Uolb 3.2.4 Multi-chamber holding and melting furnace 3.2.5 Insulated crucible cover for multi-chamber furnace 3.4.4 Pre-filling of casting system 3.4.5 Simplified plunger removal 3.4.6 Plunger stop at return stroke 3.5.2 Electric nozzle and casting container heating 4.5.0 Shut-off device for hydraulic units 4.6.1.2 Integrated water circuit control 2+4 circuits 5.1.0 Machine control DATADIALOG – RC 5.1.2 Package – casting comfort 5.2.1 Ejector pressure graph 5.4.1 Data acquisition Scope 5.4.2 Programmable inputs and outputs 5.6.0 Special cable lengths 6.0.0 INTERFACES / OPERATING CONCEPTS 6.1.3.1 Digital interface for third-party extraction device 6.1.4 Serial interface for 4 heating-cooling circuits 6.3.1.1 Operating unit with visualization on support arm 6.5.2 RSD package with switch 7.0.0 ADDITIONAL EQUIPMENT 7.2.2.2 Spraymotion 611 E with servo drive 7.2.10 Extended spraying program 7.3.1 Release agent tank TD 20 7.4.0.2 Spray bar CR 245 7.12.3 Soundproofed reject chute OF70 70 Years FRECH – Anniversary Package

Stanje: rabljeno, Charger for Jungheinrich E 220 G 24/65 B-ET-DA forklift Online video inspection possible via Skype video call. We would be delighted to welcome you for a visit – further machines available in stock. Nsdpfx Aoh Axztsh Uelb Immediately available – can be inspected at any time. Located in Emskirchen / Nuremberg – test runs possible on site.