Prednja plošča

Vierbackenfutter 400

Stanje: rabljeno, Leto izdelave: 1965, Core drilling diameter - max. 50 mm Drilling depth 2000 mm Swing diameter mm Drilling diameter max. 110 mm Total power requirement 30 kW Machine weight approx. 10 t Year of manufacture: 1965 Overhauled: 2000 Drilling Ø - Solid drilling approx. 2 - 50 mm - Boring out approx. 100 mm Drilling depth max. 1,600/possibly up to 2,000 mm (see stroke/installation length) Stroke of drilling carriage approx. 4,000 mm Distance between the two spindle heads 5,000 mm Center height above guideway 350/450 mm Feed rate of the drilling carriage, stepless: 20 - 200 mm/min Rapid traverse of the drilling carriage: 2,500 mm/min Workpiece speeds via belt pulley: 260 - 650/650-1625 RPM Main spindle drive 24 kW Coolant pump drives: 1 x 7.5/15 kW - 1 x 15/28 kW Total drive approx. 60 kW 380 V - 50 Hz Total length of machine/guideways 7500/5000 mm Total weight approx. 10,000 kg Accessories / Special equipment: "Machine consists of the following elements: The main spindle on the left, followed by a BOZA, table group driven by ball screw spindle, BOZA with increased center height, and at the end a spindle head of the B 16 series with drive motor approx. 7.5 kW n = 900/2400 and 2400/6000; very large and elaborate coolant system with filtration unit, extensive accessories and drilling tools up to 100 mm Ø. " Suitable for rotating workpiece/fixed drilling tool/ELB and BTA processes, as well as for stationary workpiece and rotating drilling tool. Can operate with internal oil supply (ELB) as well as external oil supply (BTA). " Complete coolant oil system with tank and filter, 2 high-pressure pumps by SIG, adjustable flow rate/min = 17/40/120 or 220/500 l/min. Capacity approx. 2,500 l. " Feed of the main carriage via ball screw spindle and steplessly controllable DC motor; currently, a cross-adjustable table approx. 500 mm, size approx. 800 x 800 mm, is mounted for clamping cubic and cylindrical workpieces. Electrical control via cam track approx. 2,500 mm and limit switches for rapid traverse, feed, and return. " 2 closed 3-point steady rests, FORKHARDT 3-jaw manual chuck approx. 315 mm Ø, Hodpfx Afst Hwucjasp " Modernized control panel with speed display, feed setting and display, kW display, feed/rapid traverse switch (forward/reverse), etc. " 2 separate control cabinets, separate BOZA, sleeves, reducers, clamping aids, etc. Condition: good - soon ready for demonstration, machine is very valuable due to accessories Delivery: ex stock - as inspected Payment: strictly net - upon receipt of invoice Further deep hole drilling machines constantly in stock - please contact us.

Stanje: rabljeno, Leto izdelave: 1984, premer struženja nad prečnim suportom: 1.600 mm, premer struženja: 2.000 mm, premer struženja nad ležiščem sani: 2.000 mm, stružna dolžina: 35.000 mm, teža obdelovanca (maks.): 63.000 kg, Centre Lathe SKODA - SUT 200 TD MACH-ID 9446 Manufacturer: SKODA Model: SUT 200 TD Year of Manufacture: 1984 Tandem construction on one bed with left and right headstocks Mirror double tailstock on both left and right sides Double carriage Steady rest included Roller rest included Operator panel with scales requires servicing and replacement Motorized tailstock for both left and right sides 3-bedway construction Torque on chuck: 160,000 Nm Minimum turning diameter: Ø 315 mm Field of application: Shipyards Propeller shafts Hydraulic cylinder shafts Camshafts Defense & Aeronautics Rolls and shafts for steel mills Crankshafts Specifications Metric US Standard Turning length: 35,000 mm Swing over bed: Ø 2,000 mm Swing over carriage: 1,600 mm Spindle power: 75 kW Bed width: 1,600 mm Quill diameter: Ø 400 mm Quill stroke: 250 mm Spindle speed: 180 RPM Feed rate X-axis: 5,000 mm/min Hjdpfx Aeynky Aofasp Feed rate Z-axis: 5,000 mm/min Workpiece weight: 63,000 kg Dimensions (estimated): Length: 42,000 mm Width: 3,250 mm Height: 3,250 mm Weight: 158,000 kg Please note: The information on this page has been provided to the best of our knowledge and, as far as possible, from the manufacturer. The information is provided in good faith, but accuracy cannot be guaranteed. Accordingly, no representation or contractual terms are implied. We recommend you verify all key details.

Stanje: rabljeno, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 4.000 mm, pomik po osi Z: 900 mm, največja hitrost vretena: 1.200 obr/min, hitrost pomika os X: 900 m/min,

Stanje: rabljeno, Leto izdelave: 2007, Werkstück-Nenndurchmesser 2400 mm Werkstückdurchmesser - max. 2800 mm Modul - max. 30 mm Steuerung Siemens Sinumerik 840 D Teilraddurchmesser 2200 mm Tischdurchmesser 2500 mm Tischbohrung Durchmesser / Tiefe 800 / 875 mm max. Tischbelastung 40000 kg Tischdrehzahl 4,5 min-1 Einspannlänge max. 375 mm Einspanndurchmesser max. 350 mm Fräser Durchmesser max. 2800 mm Fräserdornkegel HSK-B160 Schwenkbereich Fräskopf + 30/-45° Abstand Fräser - Werkstück 615 / 1600 mm Maschinengewicht ca. 57 t Schlittenantriebe: - Vorschub - & Eilganggeschwindigkeit: - axial 4000 mm/min - radial 3000 mm/min - tangential 3000 mm/min Ausstattung/Zubehör: - Innenfräskopf IFK2 - Fräsdorn mit Distanzscheiben - Späneförderer - Ölnebelabsaugung Hodpfx Aew Rf S Sefasp - technische Dokumentation

Stanje: rabljeno, Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, premer struženja: 1.000 mm, premer struženja nad ležiščem sani: 710 mm, stružna dolžina: 8.000 mm, Used Heavy-Duty Lathe with Extensive Steady Rest Equipment – Ideal for Pipe Machining and Long Rollers! This robust conventional lathe, featuring an impressive turning length of 8,000 mm, is specially designed for pipe processing applications. The well-thought-out machine concept allows the cutting tool to easily pass by the open steady rests – ideal for the precise machining of long, hollow workpieces. Technical highlights: • Swing over bed: 1,000 mm • Swing over cross slide: 710 mm • Center height: 900 mm • Turning length: 8,000 mm • Spindle bore: 155 mm • Machine weight: approx. 18.2 tons • Main drive: 30 kW with frequency inverter, infinitely variable Design advantages: • One-piece cast machine bed, artificially aged – for maximum stability and stress relief • 5 hardened and ground guideways for highest precision • Stepless longitudinal feed adjustment via ballscrew – no Norton or apron gearbox • Tailstock traversable by electric motor, hydraulically clamped • Manually adjustable cross slide with trapezoidal thread spindle • 4-position tool post, manually rotatable • Triple-guided compound slide – for extremely smooth operation Hodpfx Aov Tnttjfaop Steady rests & pipe machining: • Various steady rests (fixed and travelling) available as options • Motorized steady rest carriage with hydraulic clamping • Tailstock quill adjustment conveniently accessible from the operator side • Travelling steady rests can be mounted on left or right as required Application: Thanks to its sophisticated design, the machine is ideally suited for light to medium machining tasks – especially for the precise finishing of pipes. The infinitely variable speed and feed adjustment offers maximum flexibility and operator comfort.

Stanje: rabljeno, Leto izdelave: 1983, Grinding length: 8,400 mm Grinding width: 1,450 mm Workpiece height: 1,250 mm Hodpfjvr Hgvex Afajp Clamping surface: 8,000 x 1,250 mm Table height above floor: 920 mm Distance between columns: 1,470 mm Max. workpiece weight: 59,700 kg Machine weight approx.: 59.7 t Space requirement approx.: 22 x 5 x 5 m Adjustment ranges: - Crossbeam, vertical: 1,250 mm - Grinding support, horizontal: 3,100 mm Adjustment speeds: - Machine table (X-axis): steplessly adjustable 1–45 m/min table creep feed speed: 5 m/min - Grinding support, horizontal (Y-axis): rapid traverse: 3,000 mm/min feed, incremental: 0.001–0.099 mm feed, continuous: 100–3,000 mm/min creep feed: 18+1 mm/min tip advance: 0.001–0.019 mm - Crossbeam (W-axis): rapid traverse: 410 mm/min Table drive: - Oil gear, type Iv4 - Cylinder Ø: 185 mm - Piston rod Ø: 130 mm - Drive motor: 22 kW

Stanje: dober (rabljeno), Leto izdelave: 2000, Ref.-Nr.: 10623 Hersteller: WEILER Typ: E90 x 4500 Baujahr: 2000 Steuerungsart: CNC Steuerung: SIEMENS D1 - Zyklen Lagerort: Halberstadt Ursprungsland: Deutschland Bettbreite: 600 mm Drehlänge: 4500 mm Umlaufdurchmesser über Bettschlitten: 900 mm Spindelbohrung: 128 mm Max. Drehmoment: 6000 Nm Vorschubkraft - Z: 20000 kN Vorschubkraft - X: 20000 kN Eilganggeschwindigkeit: 10/5 U/min Reitstock Pinolendurchmesser: 140 mm Hjdpfx Ajy Ed Rqefaep Reitstock Pinolenhub: 300 mm Drehmeißel Maße: 32 x 25 mm Durchmesser des vorderen Wälzlagers: 178 mm Umlaufdurchmesser über Planschieber: 530 mm Spindelkopf nach DIN 55027 (Größe): Gr. 11 Reitstock Innenkegel: MK 6 / 140 Typ Maschinenlänge: 6900 mm Maschinenbreite: 2600 mm Maschinenhöhe: 2150 mm Maschinengewicht ca.: 10,5 t Zusatzinformationen: Maschine kann unter Strom besichtigt werden.

Stanje: rabljeno, Leto izdelave: 1973, Spindle diameter: 130 mm X travel: 3,000 mm Y travel: 2,000 mm Total power requirement: 4.5 kW Machine weight approx.: 30 t Boring spindle diameter: 130 mm Spindle taper: SK 50 Hodpfjt Hwt Sjx Afajp Working area: X – Column longitudinal travel: 3,000 mm Y – Spindle housing vertical travel: 2,000 mm Z – Spindle stroke: 1,000 mm Table size (lower): 3,300 x 2,400 mm Load capacity per m²: 10 t/m² Mounted table approx.: xx,000 mm Min./Max. position of working spindle above table: 770 / 2,770 mm Feed rate: 0.9 – 2,000 mm/min Rapid traverse for spindle headstock and column: 5,000 mm Quill feed: 0.5 – 1,200 mm/min Spindle speed range, partially infinitely variable: 4.5 – 1,250 rpm Machine weight: approx. 30,000 kg Accessories / Special equipment: • Heidenhain 3-axis digital readout, hardened guideways, ball screws • Infinitely variable spindle speeds and feeds, individually motorized feed drives • Operator’s traveling platform, pendulum panel control, manual hand panel, platform • Hydrostatic column displacement • Planed clamping plate 3,200 x 2,500 mm with T-slots, auxiliary table approx. 1,400 x 2,600 x 900 mm (H), one side face machined • Hydraulic clamping for column/carriage, motorized tool clamping • Extensive accessories including tool holders with and without tools • Separate chip extraction system, clamping aids, 1 clamping angle plate and plates, and much more

Stanje: dober (rabljeno), 1 used radial drilling machine Manufacturer: Stimin Model: GR 820 H Serial No.: 773 Year of manufacture: 2004 Technical specifications: Drilling capacity: 80 mm Arm reach: 1600 mm Spindle taper: Morse Taper 6 Spindle stroke: 390 mm Spindle speeds: 24 steps, 20 – 1400 rpm Right/left rotation Feed: 12 steps, 0.045 – 1.5 mm/rev Motor power: 400 V / 14.5 kVA Arm and head clamping: electromechanical Distance from machined bed to quill: min. approx. 400 mm max. approx. 1800 mm Usable machine table with 4 T-slots: 1170 x 2185 mm Coolant system 2 clamping tables Required space approx. L 2600 x H 3950 x W 1300 mm Hsdpfx Afetzctmeaep Weight approx. 8500 kg

Stanje: dober (rabljeno), skupna širina: 3.500 mm, skupna dolžina: 19.000 mm, skupna višina: 2.100 mm, teža obdelovanca (maks.): 6.000 kg, premer brušenja: 850 mm, dolžina brušenja: 6.000 mm, višina središča: 425 mm, Cilindrični brusni stroj Schmaltz - RM 82/6000 MACH-ID 9492 Proizvajalec: Schmaltz Tip: RM 82/6000 Višina konic: 425 mm Premer brušenja Ø: 850 mm Dolžina brušenja: 6000 mm Dimenzija brusnega kamna: 1100 x 80 x 560 mm Hitrost vrtenja brusnega kamna: 700 o/min Zasuk mize: -5 do +5° Konjiček: 160 x 100 Mk Hedoy Dr Eaopfx Afajp Dolžina: 19.000 mm Širina: 3.500 mm Višina: 2.100 mm Teža: 31.000 kg Prosimo, upoštevajte: Informacije na tej strani so bile pridobljene po najboljšem vedenju in vestno s strani nas ter, kolikor je mogoče, s strani proizvajalca. Informacije so podane v dobri veri, vendar za njihovo točnost ne moremo jamčiti. Posledično te informacije ne pomenijo zagotovila ali pogodbenih pogojev. Priporočamo, da preverite vse pomembne podrobnosti.