Pihalnik, centrifugalni ventilator

Venti Oelde HRV 56N-400/M GL 360

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2024, Double-sided cantilever racking used: Hot-dip galvanized bolt system Scope of delivery: - 4 double-sided racking uprights, height 4,160 mm with base 1,200 mm - 24 cantilever arms, 1,200 mm depth, standard - Including longitudinal and diagonal bracing for 1,300 mm axis distance - Incl. mounting material (without floor anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Nsdpfeh Ek Daox Anpslh - (*Spare parts reorder and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Sturdy steel construction made of IPE profiles - All components hot-dip galvanized - Load capacity per upright side: 2,250 kg - Load capacity per cantilever arm: 750 kg - Height-adjustable cantilever arms in 100 mm increments - 6 bolt-on cantilever arms and 2 base parts per upright, standard depth 1,200 mm = 4 storage levels per upright side - Including longitudinal and diagonal bracing for 1,300 mm uprights distance - Rack length 4,000 mm - Including mounting material (without floor anchors) - Supplied with installation instructions and load capacity plates C4 according to DIN standard - Expert telephone consultation - Made in Germany - Short delivery times - On-site pickup possible Our cantilever racks are exclusively manufactured in Germany. We offer reliable freight with advance delivery notification. The material is sensibly packed to allow for easy unloading. For outdoor installation, load capacities are reduced due to wind and snow load. The subsoil must be concrete, level and suitable for anchor fixing and must be able to absorb the acting loads. The floor structure and load-bearing capacity as well as any necessary official permits must be checked and ensured by the customer. The racking uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to the professional association, it is recommended that the uprights have at least 500 mm overhang on the top storage level above the upright top end.

Stanje: rabljeno, Leto izdelave: 1991, delovna širina: 220 mm, premer vretena: 40 mm, delovna višina: 120 mm, skupna širina: 1.500 mm, skupna višina: 1.500 mm, skupna dolžina: 3.900 mm, skupna masa: 2.000 kg, dolžina mize rezkalnega stroja: 2.000 mm, število vreten: 4, odstranjevanje ostružkov: 10 mm, Št. 04530 Štiristranska strojna žaga WEINIG Quattromat 22 Rabljen, leto izdelave 1991, zelo dobro stanje, stroj je iz podjetja, ki ga vodi ena oseba. Nedpfezl Uuksx Anpjlh Štiristranska žaga in avtomat za obdelavo žlebov z neprekinjenim podajanjem. Razpored vreten: 1. vreteno spodaj / 2. vreteno desno / 3. vreteno levo / 4. vreteno zgoraj Neprekinjeno nastavljiva hitrost podajanja 6 - 22 m/min Dolžina ravnine 2000 mm Delovna širina 25 - 220 mm Delovna višina 6 - 120 mm Maksimalna odstranitev materiala 10 mm Premer vreten 40 mm Moč motorja 1. vretena (spodaj) 4 kW Moč motorja 2. vretena (desno) in 3. vretena (levo) skupaj 5,5 kW Moč motorja 4. vretena (zgoraj) 5,5 kW Valji za podajanje iz jekla z utori Gumijast valj za izvajanje Gumijast valj v ravnini Vključno z orodjem za upravljanje in nadomestnimi valji Vključno z navodilom za uporabo v obliki datoteke .pdf Dimenzije za transport pribl. 3900 x 1500 x 1500 mm (D x Š x V) Teža pribl. 2000 kg Za izogib morebitnim nesporazumom je pred nakupom priporočljivo in možno opraviti ogled stroja na licu mesta, po predhodnem dogovoru. Prodaja se v trenutnem stanju. Tehnične specifikacije, opis stanja, leto izdelave in obseg dobave so v skladu s prospektom proizvajalca oz. prejšnjega lastnika, brez garancije. Pridržana pravica do predčasne prodaje. Pri rabljenih strojih se vsa garancija izključuje, velja: „kupljeno v stanju, v katerem je bilo pregledano“. Način plačila: cene so brez DDV, plačilo pred prevzemom oz. pošiljko. Pogoji dostave: iz skladišča.