Drobilnik z eno gredjo

Vecoplan VAZ 2500

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1995, obratovalne ure: 18.000 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 6.500 kg, Vhodna dolžina: 1450 mm Vhodna širina in dolžina rotorja: 2500 mm Gijdpfx Agorrhczowep Premer rotorja: 370 mm Število nožev: 71 kosov (40x40 mm) Hitrost rotorja: 118 obr/min Motor: 75 kW Napetost: 400 V Frekvenca: 50 Hz Premer sita: 30 mm Teža stroja: 9000 kg Stroj v delovanju

Stanje: rabljeno, Machine: Screw Conveyor Gsdpfx Agorn U H Hjwsip Type: Askania Maschinenbau GmbH, Screw Conveyor Model: TSF 315, No. 197 Year of manufacture: 1999 Weight: 350 kg Rated voltage: 230/400 V Connected load: 4 kW Length: 9.40 m Screw diameter: 250 mm Material: screw - steel / trough - stainless steel

Stanje: dober (rabljeno), Leto izdelave: 1994, Funkcionalnost: popolnoma funkcionalen, moč: 75 kW (101,97 KM),

Leto izdelave: 1999, stanje: rabljeno, Used Entex Extruder PL-WE150 complete with control cabinet, previously used for powder coatings, in good condition. We can also offer you an Entex PL WE 70! Giedpfx Agsbqt Arjwep

Stanje: rabljeno, Leto izdelave: 2021, Lindner Urraco 95 DK – Year of Manufacture 2021 – Well-Maintained Condition For sale is a Lindner Urraco 95 DK from 2021 with 7,230 recorded operating hours. The shredder is in a well-maintained, ready-to-use condition. The exact condition can be seen in the photos. The machine is equipped with the DK4 package, featuring a reinforced gearbox and reinforced cutting frame. — Features / Scope of Delivery • 1 set of armored shafts HW 8/10 with comb scrapers and re-breaking bar, suitable for scrap and waste • 1 set of used shafts HW 8/10 with comb scrapers and re-breaking bar, also for scrap and waste • DK4 package with reinforced gearbox and reinforced cutting frame — Technical Data – Lindner Urraco 95 DK Model: Lindner Urraco 95 DK Year of manufacture: 2021 Operating hours: 7,230 Engine output: approx. 566 kW (approx. 770 HP) Gedpfjx Nkhqox Agwoip Emission standard: Stage V / Tier 4f (depending on configuration) Shaft length: approx. 2,500 mm Shaft diameter: approx. 870 mm Maximum torque: up to approx. 480,000 Nm Machine weight: approx. 46 t Dimensions (L x W x H): approx. 9.2 m x 2.55 m x 3.2 m Undercarriage: tracked chassis, hydraulically driven Applications: scrap, commercial waste, bulky waste, mixed waste, wood, recyclables — Condition: • Well-maintained machine • Fully operational • Sale as inspected on-site Additional Information / Service History The machine has always had a full maintenance and service contract directly with Lindner. All maintenance and service work has been performed professionally according to manufacturer specifications and documented. Notes: • Sale is without any warranty or guarantee. • No returns or renegotiation. • Subject to prior sale. All details are provided without guarantee. The seller accepts no liability for any errors, incompleteness, or changes to the information provided. The sale is exclusively subject to prior sale.

Stanje: rabljeno, Leto izdelave: 1998, Funkcionalnost: popolnoma funkcionalen, višina skobljanja: 250 mm, delovna širina: 410 mm, skupna masa: 5.500 kg, Skobeljni stroj REX TIMBERWORK 410x250 mm + 4x posneti robovi + žagin vreteno Leto izdelave: 1998 Gisdpfx Agewmm Alswop Lokacija: Francija, Savoja

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: C3300, dolžina brušenja: 4.500 mm, širina brušenja: 300 mm, dolžina mize: 4.500 mm, širina mize: 300 mm, potrebna višina: 2.500 mm, zahteva za prostor dolžina: 13.700 mm, potrebna širina: 2.500 mm, Reform AR45 T9 ZU C3300/86 Year of manufacture: 1986 Grinding length: 4500 mm Gijdpfxetqtn Do Agwjp Grinding width: 300 mm Workpiece height: 250 mm Table or grinding arm swivel range: ±90° Segment head diameter: 560 mm Spindle diameter at front bearing: 120 mm Swiveling: 2° Max. torque: 719.5 Nm Motor: B280, 55 kW Grinding spindle speed range: 0–730 rpm Control: BBC Baumüller drives Marposs measuring system Hydraulic clamping Grinding mist extraction system: Hydrocyclone cleaning plant Auxiliary grinding unit ZU Feed rate: 2000–35,000 mm/min Space requirement approx. 13.7 x 2.5 x 2.5 m

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Gedsh S Nz Sjpfx Agwsip Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Stanje: rabljeno, Infeed cross-section: 1200 x 1600 mm Drive: 110 kW, without gearbox Rotor flight circle: 380 mm Rotor speed: approx. 470 rpm Gsdpebq Stqjfx Agweip Rotor design: 66 cutter plates on tool holders Screen construction: heavy-duty screen basket, reinforced with ribs Screen perforation: 15 mm Counter knives: with adjustable cutting gap Machine weight: approx. 5,900 kg

Stanje: dober (rabljeno), For sale: individual original deep hole drilling bits from Botek (Germany) – a renowned manufacturer of precision metalworking tools. Gijdpfx Aswg R I Eogwop Single-lip drills with internal coolant supply, made from ultra-hard and wear-resistant K15B carbide. • Diameters from 3.0 mm to 10.2 mm • Working lengths from 150 mm to 480 mm • Internal cooling through the body • Material: K15B micrograin carbide • Suitable for steel, stainless steel, aluminium, bronze, and engineering plastics These drills are designed for precision deep hole drilling with high dimensional stability. Applications include aerospace, automotive, hydraulics, and toolmaking industries. Condition: New and used (previously run), but in good technical condition. Some may require resharpening – an ideal base for professionals. //// PRICE IS PER PIECE /////